i just wanted to install a custom firmware which is gingerxperia v10, i already have the latest baseband(xx015) , but when i booted up to xrecovery and try to install the firmware, the process says: "update to latest baseband first", and i already have the latest baseband, it still wont install (sony ericsson w8).. ( help please? im just a noob
Jus22 said:
i just wanted to install a custom firmware which is gingerxperia v10, i already have the latest baseband(xx015) , but when i booted up to xrecovery and try to install the firmware, the process says: "update to latest baseband first", and i already have the latest baseband, it still wont install (sony ericsson w8).. ( help please? im just a noob
Click to expand...
Click to collapse
hi.can u please help me out.i am using SE w8 and its similar to x8..i need to upgrade it to minicm7....can u tell me how to change the baseband from 06 to 015..i tried ,but showed error readind that reinstall the drivers and try again can u please help...i tried a lot of steps...but nothing showed an effect
TrazerWalker said:
hi.can u please help me out.i am using SE w8 and its similar to x8..i need to upgrade it to minicm7....can u tell me how to change the baseband from 06 to 015..i tried ,but showed error readind that reinstall the drivers and try again can u please help...i tried a lot of steps...but nothing showed an effect
Click to expand...
Click to collapse
try reinstall PCC again
download new baseband file (I tot maybe your baseband file corrupted)
flash baseband file again
after finnish try to install the rom
nelikp said:
try reinstall PCC again
download new baseband file (I tot maybe your baseband file corrupted)
flash baseband file again
after finnish try to install the rom
Click to expand...
Click to collapse
when i tried to install 2.3.7 on my w8 it said kernal "na06" not found..
what do i need to do now?
Maybe this help!
TrazerWalker said:
when i tried to install 2.3.7 on my w8 it said kernal "na06" not found..
what do i need to do now?
Click to expand...
Click to collapse
You must download flash tool, download the correct baseband first (xx15), put the baseband file in the folder FIRMWARE, run the program and follow the instructions.
If this help you hit the THANKS button!
Jimmy Thrashmetal said:
You must download flash tool, download the correct baseband first (xx15), put the baseband file in the folder FIRMWARE, run the program and follow the instructions.
If this help you hit the THANKS button!
Click to expand...
Click to collapse
you did helped me.
i am now running 2.3.7 on my w8.
thanks.
please let me know any higher updates available for x8/w8
Which ROM are you using now?
TrazerWalker said:
you did helped me.
i am now running 2.3.7 on my w8.
thanks.
please let me know any higher updates available for x8/w8
Click to expand...
Click to collapse
Nowadays i'm using GingerCruzt revision 8.4 with stock kernel, pretty good for me!
Everytime i flash my w8 e16i baseband to .15 it remains the same and when i open the pcc it recommends me to update to latest software but my software is already the latest pls HELP ME....
try to reflash baseband 015
Related
I'm a W8 User from Taiwan
I've already update before
I only can install GingerDX
GingerCrutz7.4 ican't install it(but7.3can)
I've full wipe
So I don't know what question on my phone
Did you u7se the right recovery?
There are two ones installed in GingerDx.
And what kind of error message do you get?
codfreak said:
Did you u7se the right recovery?
There are two ones installed in GingerDx.
And what kind of error message do you get?
Click to expand...
Click to collapse
You need to upgrade your baseband to......
than failed
Check this thread about basebands.
Me too, I'm also from Taiwan, my friend.
I'm also using w8, and I have same problem with you.
It's quitly ****ing....why can't I install 2.3 custom roms other than Dx?
My baseband is 015 for default but that update script told me to update my baseband...
getting crazy..
i just want to upgrade my phone's firmware but i don't know how/where i should start. here's my current Splus info:
Android 2.3.3
i9001DXKD2
Note: Samsung kies does not recognize my phone.. i cant update it..
any help will be appreciated..
sashahime said:
i just want to upgrade my phone's firmware but i don't know how/where i should start. here's my current Splus info:
Android 2.3.3
i9001DXKD2
Note: Samsung kies does not recognize my phone.. i cant update it..
any help will be appreciated..
Click to expand...
Click to collapse
Don't use samsung kies.. use Odin, there are more tutorials on how to flash roms
can i use i9001DXKJ2 android 2.3.5 to my phone?
Same problem.. can i use i9001DXKJ2 to update my i9001DXKD2? anyone? help~
sashahime said:
can i use i9001DXKJ2 android 2.3.5 to my phone?
Click to expand...
Click to collapse
yes you can, but it would be better if you flash I9001XXKPS, its 2.3.6 and supported for most mods
here is the link for all stock roms: http://forum.xda-developers.com/showthread.php?t=1346245
tomixdev said:
yes you can, but it would be better if you flash I9001XXKPS, its 2.3.6 and supported for most mods
here is the link for all stock roms: http://forum.xda-developers.com/showthread.php?t=1346245
Click to expand...
Click to collapse
after flashing it. my phone keeps on rebooting. what should i do?
go to recoverey mode, factory reset data and now boot
hi all i tried to install escha and stromvix rom today and it says my baseband is outdted need xxx 015 ...i checked and its the same ...i can install gxp ,gdx and gc but i cant intstall this2 ..help please =(
tohno said:
hi all i tried to install escha and stromvix rom today and it says my baseband is outdted need xxx 015 ...i checked and its the same ...i can install gxp ,gdx and gc but i cant intstall this2 ..help please ='
Before you do anything else, you need to update your phone using PC Companion (download here: http://www.sonyericsson.com/cws/supp...x8?cc=us&lc=en). PC Companion will guide you right through all the steps for updating.
The latest version is 2.1.1.A.0.6, and the latest baseband is M76XX-TSNCJOLYM-53404015.
You can check your version by going to Settings -> About Phone.
If you are already running a custom ROM, you should update using PC Companion too, because some roms (like MiniCM) need the latest official version.
If you need basebands for your X8, here's a helpful thread: http://forum.xda-developers.com/showthread.php?t=976538
Flash them with FlashTool.
Click to expand...
Click to collapse
checked ...its all up to date...i tried n my old w8 ( a month ago ) the prrblem is the same o.?
AbirXtreme said:
The latest version is 2.1.1.A.0.6, and the latest baseband is M76XX-TSNCJOLYM-53404015.
Click to expand...
Click to collapse
That's not entirely correct ...
The latest ROM version for the X8 is 2.1.1.C.0.0 and there's a FTF image for Flashtool flashing.
The latest ROM version for the W8 (and that's tohno's phone) is 2.1.1.A.0.53(?) .54(?) and there's no Flashtool FTF around. The best thing you can find is a 2.1.1.A.0.46 xRecovery backup. I once found the latest W8 ROM image (FTF) by Google on some Malyasian? Chinese? websites where one needs some program to download plus a login to the site distroing the file (looks like Share or PerfectDark or something along that line).
lol ..that is too advanced for me
I've got SE W8(E16i), with locked bootloader (not unlocked coz it date is 11W37). I rooted the device, installed busybox and xRecovery. Then I flashed the Rom GingerDX v029 using xRecovery and done a full wipe. Then after reboot my cell is stuck at Sony Ericsson Logo.
I have also tried flashing the rom using CWM and also a stock kernel over it but the result was same....
I dont want to get stucked with this Stock 2.1 update 1 firmware. It really sucks.
Firmware version 2.1-update 1
Baseband: M76XX-TSNCJOLYM-53404015
Kernel Version: 2.6.29
[email protected] #1
Build Number: 2.1.1.A.0.53
Plz help me.:crying::crying:
check your downloaded rom.be sure its the latest gdx for stuck...and follow the steps
(sorry i got hit the double thanks)
sent from my x8™ using gingerzaraki®
yes I have downloaded the latest gdx rom and tried every steps carefully.... but no luck
anismaharjan said:
yes I have downloaded the latest gdx rom and tried every steps carefully.... but no luck
Click to expand...
Click to collapse
Dude check ur download again. There are more than 5 links on the thread, make sure u downloaded v29 for stock kernel and not the one for ccustom kernel. Always full wipe when installing new rom to.prevent bootloop too
Hit thanks if it helps now just repair it using Sony mmobile update service and try agn
U can try with other stock rom
E.g. Fde+4, kuyadroid 4.5.4, froyopro 2.5
Try thier working but before that make sure that u have arranged all for recovering soft brick. My mean flashtool and .tft file
Officially corp via w8
leecorp said:
U can try with other stock rom
E.g. Fde+4, kuyadroid 4.5.4, froyopro 2.5
Try thier working but before that make sure that u have arranged all for recovering soft brick. My mean flashtool and .tft file
Officially corp via w8
Click to expand...
Click to collapse
Its ftf file
Sent by a Mastermind to a Criminal©
kuya droid worked thankss
i make root to my phone and i want to make flash but it give ( security error ) and i try to solve it from flash tool with room V30C_00.kdz
but give the same problem ,my phone is LG p970 and my room was ICS 4.0.4
pleas help me.
which flash tool ? use smartflash with proper files. the firmware should have an integrated recovery mod for letting you doing a factory reset
body_90 said:
i make root to my phone and i want to make flash but it give ( security error ) and i try to solve it from flash tool with room V30C_00.kdz
but give the same problem ,my phone is LG p970 and my room was ICS 4.0.4
pleas help me.
Click to expand...
Click to collapse
you need to install an earlier version (V20X) and then upgrade to version (V30X) 4.0.4 or better go to cm10.1 or 4.2.2 Mackay ... SmartFlash and y need to use bin files ...
ICS 4.0.4 no good for root or use rom manager = security error ...
*sorry bad english , im brazilian ... I'm learning ..
u should flash v10(froyo) using smart flash tool and then root by ginger break and install rom manager and CWM.
if u find v10 rom send its link to me pls!
AZjaguar said:
u should flash v10(froyo) using smart flash tool and then root by ginger break and install rom manager and CWM.
if u find v10 rom send its link to me pls!
Click to expand...
Click to collapse
wrong link sorry ...