Anyone had success with Full Screen Caller id app????? thanks
The problem with the Gear is that the Intent that says that the "phone" (Gear in this case) is ringing is never called. That´s because the phonecall is handled in some virtual way inside the Samsung apps.
Tried to create some simple app that caused the phone to vibrate (When Gear set in sound mode) upon incoming calls but failed since I could never get an intent saying that an actual call was coming.
With that said, it will be hard to get Caller ID app to work since they also need that intent...
Related
Hi,
if Diamond is locked and you receive a call “incoming call screen” is change (it is windows default incoming call screen).
It is possible to see Diamond “incoming call screen” even the prone is locked?
Thanks
P.S. Excuse my English
hi, I am not sure what exactly is your problem, but I personally use this program as replacement of the default call manager. it shows big screen with photo and few other information, not just the small one which I cannot read so easily.
Hello Sinmae,
I'm also trying to use Inesoft Address Book on my dimond however I have the following problem:
I've installed this program on my new HTC Diamond SPRINT, and I love it. However it conflicts with built-in dialer/callerid. On incoming call I see first the original caller id screen then after a second Inesoft one. On the call end it comes back to the original dialpad and not the Inesoft one. can I completly disable the built in dialer and caller id ? Do you have a solution?
Thank you in advance,
Leonid
leond said:
Hello Sinmae,
I'm also trying to use Inesoft Address Book on my dimond however I have the following problem:
I've installed this program on my new HTC Diamond SPRINT, and I love it. However it conflicts with built-in dialer/callerid. On incoming call I see first the original caller id screen then after a second Inesoft one. On the call end it comes back to the original dialpad and not the Inesoft one. can I completly disable the built in dialer and caller id ? Do you have a solution?
Thank you in advance,
Leonid
Click to expand...
Click to collapse
i have the same problem
inesoft Incoming call screen
inesoft Incoming caller id screen struggles to appear on top but the original caller id fight's back and so on.
aasa1111 said:
inesoft Incoming caller id screen struggles to appear on top but the original caller id fight's back and so on.
Click to expand...
Click to collapse
Install "Advanced config" program Open it and go to->Phone ->Phone skin: and disable it. Then soft reset. Your problem will gone forever
Hi!
I'm kinda new here so bare with me...
i've searched without any luck to finding the answer to my question...
When someone calls me, the diamond gives me the choice to reject the call and texting the caller with a predefined message...the problem is that i have to actually send the damn message after haning up...wich kinda takes the whole idea away of having the phone doing it...
Now, is there anyway i can make the damn sms get sent without me having to actually click the send button?? just reject the call and let the phone do the job?
Come on, somebody has got to have had the same issue?
Go to Settings.. Phone... Advanced (right at the right hand end) then de-select "Reject call with text message"
i think you misunderstood me, i don´t want to turn off the feature, just make it do the whole procedure and not stop right before the message gets sent.
Uncheck the option to edit the text message, on the advance tab.
Well nobody is understanding what he is saying.
This is a good idea, infact i also wanted to do the same thing.
What we want is that as soon as we reject the call with send text button phone should directly send the message to the caller (with predefined text) without opening the predefined compose messsage and then we click send again to let the sms shoot to the caller.
I think this feature wont be possible with soft reject or hard reject key coz then it will send sms to each and every caller or even to landline caller. There should be other soft key just like "Send Text" soft key where we press it and automatically phone sends the sms to the caller.
Hope i am able to explain.
Regards,
Vishal
Reject++
If you are looking for an app to let you reject incoming calls with predefined or custom SMS and setup a reminder to return a call as well..
so check Reject++
You can:
- Reject a call with SMS, Reminder, Or Both.
- Convenient Slider on top of incoming call screen, slider it up and go with Reject++
- Smart SMS Templates with "Tags"
- Smart Reminders Scheduling Engine.
- Works with mobile screen locked or OFF
- Notifications works no matter if the app is active or not.
Check much more Features & Screenshots for Reject++
Hi
I am looking for a solution to quickly change if I want my caller id to be shown on outgoing calls.
I know there is the gsm command #31# but this doesn't work with international numbers nad sometimes even not with local numbers.
I know there is a setting in "settings" but this is quite a hassle always going through several pages of settings.
My anycut doesn'T work on Android 1.6 anymore.
So anyone has an idea for a shortcut or a widget to show and not show the caller id on outgoing calls?
Thanx
Hi,
Is there any application which fakes incoming caller ID ? I assign some fake number to an incoming number and the fake number is displayed when he or she calls.
The same with SMS too.
painkiller009 said:
Hi,
Is there any application which fakes incoming caller ID ? I assign some fake number to an incoming number and the fake number is displayed when he or she calls.
The same with SMS too.
Click to expand...
Click to collapse
just use SmartPhone PhoneyCall to fix it
I'm not looking for a fake call generator.
I'm looking for something which can replace/modify and display different incoming number.
painkiller009 said:
I'm not looking for a fake call generator.
I'm looking for something which can replace/modify and display different incoming number.
Click to expand...
Click to collapse
okay , if so try SMSDRFixWM
- Improved phone number searching algorithm
- Improved contact looking up
- Added replacing number in text messages
- Improved Delivery notification design
- Simplified settings
- Deleting moves messages to delete folder
- Fixed setting delivery time
I'm sorry to say that even thats not what I have been looking for. I never mentioned anything about delivery reports. The app you suggested is for delivery reports. It replaces the number and displays contact in a delivery report.
MagicCall is something which suites my need. I tried it, pretty much enough for the calls. Except for Incoming calls it can't replace original number if you want to answer the call.
And for SMS I'm still looking. May be something like which can encrypt.
painkiller009 said:
I'm sorry to say that even thats not what I have been looking for. I never mentioned anything about delivery reports. The app you suggested is for delivery reports. It replaces the number and displays contact in a delivery report.
MagicCall is something which suites my need. I tried it, pretty much enough for the calls. Except for Incoming calls it can't replace original number if you want to answer the call.
And for SMS I'm still looking. May be something like which can encrypt.
Click to expand...
Click to collapse
this application to protect your private and sensitive infomation such as contacts, call history, tasks and SMS
-Call Magic: Answer incoming calls to your phone automatically and/or listen to what is happening around your phone. This ground breaking technology is the only one of a kind solution in the mobile industry!. This solution is software based and does not require any hardware tweaking.
-Call Magic will enable you to answer incoming calls from a pre-defined number at zero ring, i.e. the phone will answer the call automatically without a ring! Every time you call your phone from the pre-defined number, the phone will answer the call without a single ring! After the call is picked up then you can hear what is happening in the surrounding of the phone.
-After Installation Call Magic allows your phone to have three answer modes -- Reject All, Hands-free and Answer One.
-In Answer One Mode you can set a pre-defined number and select the number of rings after which the phone should auto-answer. No further user interaction is required. If you selected, zero rings then next time a call is made to your phone from the pre-defined number, your phone will automatically answer it. No rings, it simply answers! Magic!
-In Hands free Mode the user can select the number of rings after which ALL incoming calls will be automatically answered.
-Reject All Mode will reject ALL incoming calls and send a busy signal to the caller. The caller and you will not be charged for the call. Our software makes the Network Provider send a busy signal to the calling party.
-Call Magic does not require constant activation after the phone is switched on. Call Magic is a Pure Software Solution and starts up automatically when the phone is switched on.
-WARNING! Using surveillance devices, intercepting and/or recording audio conversations, without the consent of all the parties involved might be illegal in your country. Check local laws before using Magic Call.
Not sure if I'm in the right place for this so sorry if this gets posted incorrectly.
I'm relatively new to Tasker. Trying to use it autoanswer a call from a specific caller and then dial the number 1, but I'm having real issues getting it setup. Here is what I've done so far.
I developed a task that I'm just calling test using the following steps:
1. CALL - triggered by an incoming call from a specific name (not using a the number)
2. WAIT - currently set to 70ms.
3. LAUNCH APP - launch the phone keyboard.
4. SPEAKERPHONE - set to "on"
5. IN-CALL VOLUME - level 8
6. BEEP - this is just a notification for me that a call has started. I've got it set to 1000 MS
7. AUTOINPUT ACTION - clicks the 1 key.
I then setup a profile, selected STATE, selected CALL INCOMING and then assigned the task to it.
When go to the task and click the play button, it works just fine. When I actually call the number though and have the task set to use my name, I get an error message.
I've tried various versions of this, screening for specific numbers or for a name, but no joy on any of them. The farthest that I've been able to get is to have the phone pick up a call and turn on the speaker phone, but that's only if I don't screen the name or the number of the caller. When in an actual call, I haven't been able to get the keyboard to launch at all.
Additionally, I've been looking all over for examples of a similar task and haven't really found anything useful.
The phone I"m using is a moto g6 - not rooted - running Oreo. Any help would be very much appreciated.