rooting N7000 with out bottom buttons - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

rooting N7000 with out bottom buttons - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

hi
been searching for a solution for long time
i have a note that all the buttons dont work, the HOME BACK and MENU, the power and volume works
i need to root it , but cant go into recovery mode of any sort since the HOME button doesnt work
i CAN enter download mode and work with ODIN, thats all
rom version i got now is 4.1.2 LS6
is there any way i can root my note ??
thx

enable usb debugging.
download Philz kernel DDLS6 .zip file and place it on ext SD.
connect phone to pc and run adb as root
run command adb reboot recovery.
in recovery, choose the file from ext storage and flash Philz kernel..

nokiamodeln91 said:
enable usb debugging.
download Philz kernel DDLS6 .zip file and place it on ext SD.
connect phone to pc and run adb as root
run command adb reboot recovery.
in recovery, choose the file from ext storage and flash Philz kernel..
Click to expand...
Click to collapse
thx alot for the reply
where can i get adb and the kernel ?

Related

SGS crash help

Hello friends
i have recently applied an update.zip file via recovery mode, and after that my phone doesn't turn on any more, it hangs on galaxy s screen and vibrates frequently.
i can go to recovery mode(that only has 4 selection:
reboot now--- apply sdcard:update.zip---wipe data/factory rest---wipe cache partition)
and i can go to downloading mode too, the file that crashed my phone was a part of call recorder application that i have installed, and then tried to apply the update.zip file, and in the page that describes the installation guide(that is in this website.....) has a recovery update.zip file that i think if i can apply the new file, the phone can turn on, the problem is that i can't replace the old damn update file with new one because i don't know how to do it with computer, i try to connect via usb but only when the phone is connected to phone that is in recover y mode, pc recognizes the phone(the phone memory and external sd card cant appear) and only "adb devices" command tells me that its recognized, but i can't copy and replace the new update file with adb command either. so can anyone help me to move and replace the new file via downloading mode or ordinary recover mode OR to install Clockworkmod when it's off??!!!
thanks....

Wipe Cache that fails Factory reset.
That fails flash stock rom via Odin pit 512 and repartition checked .
jje

i don't want to lose my data that are on phone memory, is there any other way to recover phone without flashing ROM?? i want to keep my data and applications . can i install Clockworkmod via ODIN? i mean is there any way to change the ordinary rocovery mode with CWM using ODIN or any other program that runs on pc?

CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Or a later version use search its on here flash via Odin for CWM 2e.
jje

ok, my rom version is JPJPG, is this compatible with my rom? and please tell my how to use it, i know that i should use it via odinn, but in which part? (PDA or CSC or phone or pit?) and which selection should be ticked? (re-partition, auto reboot or f.reset time?)
thanks alot

Odin and PDA stock settings on ODIn as it opens tick nothing bar the PDA tab .
jje

Galaxy Mini 2 recovery loop

I was trying to make a backup of my entire system through CWM(based) 5.0.2.8, but after it was done and I rebooted it, it started up in recovery mode again, and it does this with every reboot.
I've tried 1 fix I found which could have worked (exitrecovery.zip), but it did not work, and I couldn't find one specificly for the GT-S6500D.
I am hoping someone knows of a fix.
Cheers.
edit: I'm also not able to access Download Mode for some reason.

Syphere said:
I was trying to make a backup of my entire system through CWM(based) 5.0.2.8, but after it was done and I rebooted it, it started up in recovery mode again, and it does this with every reboot.
I've tried 1 fix I found which could have worked (exitrecovery.zip), but it did not work, and I couldn't find one specificly for the GT-S6500D.
I am hoping someone knows of a fix.
Cheers.
edit: I'm also not able to access Download Mode for some reason.
Click to expand...
Click to collapse
Whose CWM did you use ? Squadzone's or mb-14's ?
You can access the download mode by holding Volume Down + Home + Power pressed until the download mode prompt appears , then press Volume Up to continue .
If you manage to get into download mode , flash Squadzone's CWM with Odin and the problem will be fixed .
I hope the so-called "exitrecovery.zip" didn't make the Download Mode unavailable and you were just pressing the wrong buttons . If you won't be able to enter DM , your phone is quite toast .

Help
Uizz.UW said:
Whose CWM did you use ? Squadzone's or mb-14's ?
You can access the download mode by holding Volume Down + Home + Power pressed until the download mode prompt appears , then press Volume Up to continue .
If you manage to get into download mode , flash Squadzone's CWM with Odin and the problem will be fixed .
I hope the so-called "exitrecovery.zip" didn't make the Download Mode unavailable and you were just pressing the wrong buttons . If you won't be able to enter DM , your phone is quite toast .
Click to expand...
Click to collapse
Help I'm in the same problem with that "loop" i can't get out of cwm-recovery what can i do? could you send me those links you talk about? please
---------- Post added at 06:44 PM ---------- Previous post was at 06:33 PM ----------
Syphere said:
I was trying to make a backup of my entire system through CWM(based) 5.0.2.8, but after it was done and I rebooted it, it started up in recovery mode again, and it does this with every reboot.
I've tried 1 fix I found which could have worked (exitrecovery.zip), but it did not work, and I couldn't find one specificly for the GT-S6500D.
I am hoping someone knows of a fix.
Cheers.
edit: I'm also not able to access Download Mode for some reason.
Click to expand...
Click to collapse
I got the same problem as you! But I wen to http://forum.xda-developers.com/showthread.php?t=1255214 and download the file Root Zip for G2X: http://www.mediafire.com/?92qpr525ztblh8w and put in a SD card... then in recovery go to install zip from SD card and install that file, and reboot. I will be just the same recovery-loop but now at least I could go to download mode (volume down+home+power) and put odin from here: http://forum.xda-developers.com/showthread.php?t=1768622 and install the ClockWorkMod 5.0.2.8 again with odin and then my cellphone fix! Hope this help you too man!

FireStarter88 said:
Help I'm in the same problem with that "loop" i can't get out of cwm-recovery what can i do? could you send me those links you talk about? please
Click to expand...
Click to collapse
You can find Squadzone's CWM , as well as some other neat things for SGM2 , by clicking here .

you need to flash a stock rom via ODIN, there where errors on the partitions, there are not define correctly

dany547 said:
you need to flash a stock rom via ODIN, there where errors on the partitions, there are not define correctly
Click to expand...
Click to collapse
S6500XXLD2_S6500DBTLD2_DBT.zip | 249.3 MB downloading this file
open odine > and select PDA and flash? or also select PIT file?

ward0 said:
S6500XXLD2_S6500DBTLD2_DBT.zip | 249.3 MB downloading this file
open odine > and select PDA and flash? or also select PIT file?
Click to expand...
Click to collapse
this solved my problem.

I had the same problem with rooting S6500
I give you here my fix that stops boot with CWM Recovery (you will still access CWM recovery with Volume Down + Home + Power pressed)
Resolution 100% for bootlooping S6500 with CWM Recovery
1 - Grab a stock rom
2 - Extract boot.img
3 - Go to Linux and run
Code:
tar -H ustar -c boot.img >boot.img.tar
4 - flash boot.img.tar with ODIN (donwload mode Volume Down + Home + Power pressed)
you boot normally now!
5 - try recovery CWM - Volume Up + Volume Down + Home + Power pressed
NOTE:
‘ustar’ Creates a POSIX.1-1988 compatible archive needed for ODIN (7zip and others on windows doesnt have this option, and gives errors on flashing, so dont use them)
have fun!

i've resolved this problem by flashin cwm thru odin again..

TAR for Windows
Here is the link for "Tar for Windows":
http://gnuwin32.sourceforge.net/packages/gtar.htm
Download and install it.
after instalation:
1. Extract boot.img from the firmware file, using 7zip (ignore the error)
2. Open a command prompt window in the folder containing boot.img (Shift+Right Click anywhere in the folder window, or CD to the folder)
3. Run the command instructed by testz:
Code:
tar -H ustar -c boot.img >boot.img.tar
4. flash boot.img.tar with ODIN (donwload mode Volume Down + Home + Power pressed)

[SOLVED] Rooting the OTA updated UVMA1 build

See several posts below for the steps that worked for me
I'm posting this here because my post in the Q&A forums has received zero replies.
I feel like I've tried everything. I installed the UVMA1 over-the-air update and have lost and am unable to regain root. I seriously need a solution to this.
Has anyone been able to root the most updated SGH-T879 with the UVMA1 build?

Re: [Q] Rooting the OTA updated UVMA1 build
You have to do following steps
1.download CWM recovery. tar
2.download odin flashable CWM touch recovery.tar
3.go to download mode
4.flash the UVAM1.tar file through odin
5.flash the CWM recovery.tar through odin
6.flash the CWM touch recovery.tar through odin
7.go to recovery mode flash the super user
8.reboot
You should be okay...
I hope that it helping you to Root the phone.
Let me know if you did.
Good luck..
Sent from my SGH-T879 using xda premium

Flash the CWM recovery tar through Odin.
https://www.onlinefilefolder.com/3sYujqhSWDjt5I
After CWM has been installed, flash superusers through recovery.
https://www.onlinefilefolder.com/3sRc8Cz8TcpOLC
To change recovery to TWRP (which most people seem to prefer now days) flash TWRP zip through CWM recovery. I like this method better than trying to install TWRP through Goomanager, I always have trouble with that for some reason.
Paste below address into your browser
goo.im/devs/OpenRecovery/sgh-t879/openrecovery-twrp-2.3.1.1-sgh-879.zip
Now your phone is rooted and you have TWRP.

Re: [Q] Rooting the OTA updated UVMA1 build
I did as same as it.
But. I couldn't go to recovery
That is why important that make it sure flashing CWM touch recovery.tar through odin.
Maybe just my phone?.
Thank you.
Sent from my SGH-T879 using xda premium

I got my phone to root, but have been unable to change the recovery so I can switch to 4.2.2.

I will clean this up as time permits.
Success!
Through trial and error, on Ubuntu and Windows, I have managed to successfully root the UVMA1 build. I did not screenshot the process so I'll be going from memory. On the other hand I will post a stock backup of the ROM for everyone to use as needed.
This did not work on Ubuntu, had to use Windows.
You will need:
Android Tools SDK
CWM
most recent ODIN
Superuser zip
Steps:
download Android Tools SDK.
Extract to your C: on your windows machine
Open command prompt and navigate to the Platform-Tools directory
enable debugging mode on your Note (Settings > Developer Options > USB Debugging
Leaving your phone on, connect via USB to your computer
wait while the Samsung drivers load
On command prompt type "adb reboot-bootloader" or "adb reboot bootloader" and wait (might need to try both)
Your phone should reboot into downloader mode
Open the newest version of ODIN
In Odin, nothing significant will change, I only saw a blue box in the first square top left
Click on 'Bootloader' button and select the tar.md5 file from Tomin's Goodies thread (link to come later)
In Odin, click on Start
Odin will scroll some text in the little window (bottom left) and then stop. I waited about five minutes. Nothing changed.
Disconnect your phone, pull the battery, press the power button (to dissipate magic electrons), put the battery back in and turn the phone on
Your phone should show a screen saying there is an issue with the Firmware and to use Samsung Kies to fix it. IGNORE THIS, don't do anything
Reconnect phone to PC via USB
wait about 30 seconds for the computer
In Odin, press Start again.
Odin should do something differently than the first time, you should see the top left window go green and 'Reset Ok' in the bottom left window.
Your phone will reboot. If it loads to Android then go to the command prompt window on your PC and type 'adb reboot recovery'
wait about a minute. CWM should load on your phone.
Now is the time to install Superuser zip through CWM.
Additionally, clear dalvik and other caches, reset permissions and backup your rom to external SD card now.
If anyone tries this, please document the process with screenshots so we can create a more comprehensive tutorial.

devices can't start, debug usb not turn on

after installed super su I reboot my devices but it block. with adb on my computer i have ? anauthorized and i have not a custom recovery, i am on lenovo k3 note. i want to install a cmw recovery but adb don't work and on my recovery i just have install uppdate.zip from sdcard 2. i think the sdcard2 insn't the my external memory card. and i have the official rom on my computer. how can i get authorized .? or how can i flash it ? i tried sp flash but without debug usb turn on there is nothing, the download don't start.
need help please.

[GUIDE]Stuck on Fastboot screen?? This guide can help you..

Hai guys...
This is a problem that i have encountered myself whrn using the phone Xiaomi Redmi Note 4g. I was trying to update my system using inbuilt system updater.. Don't know how but it suddenly finished installing and promted me to reboot.But after reboot i got stuck on the Fastboot screen..
I couldn't access my recovery options as well i had twrp already installed..
Since then i surfed the net and also XDA to find a solution to this..
Referring a lot of threads a found a way and made it work and i would like to share it with you..

So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Code:
C:\\Program Files\Minimal Adb and Fastboot
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
Code:
fastboot devices
After executing you can see a device if have connected.. If this happens we can carry on
Then type
Code:
fastboot flash recovery twrp.img
After this twrp will install on ur phone..
Now this
Code:
fastboot boot twrp.img
This will take the phone directly to the TWRP
There first u need to click on wipe >>advanced wipe>>select everything except your external sd (if u have one)>> Swipe
After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)
After completely copying Click on Install>> select the rom from the internal >> swipe
Then wait for the rom to flash..
After flashing wipe the davlik cache..
Also flash Gapps.. if u want root u can also flash supersu as well
Now reboot the phone ..n ..enjoy
Hit the button if u liked my post and also feel free to comment if u have any doubts (quote me or i wont know)..

Here is download links
The rom i suggested CM14
https://forum.xda-developers.com/re...edmi-note4g-cm14-1-android-nougat7-1-t3499074
Open Gapps
http://opengapps.org/?download=true&arch=arm&api=7.1&variant=pico
TWRP
http://roms.gerrett84.de/dior/twrp/stable/
ADB
https://www.androidfilehost.com/?fid=745425885120698566

Screenshots after new ROM installation

Kudosss....
Thansk a lot. It worked well. But saddest thing is i couldnt find CM ROM which you recommended. But mobile started working.

manikumar1988 said:
Kudosss....
Thansk a lot. It worked well. But saddest thing is i couldnt find CM ROM which you recommended. But mobile started working.
Click to expand...
Click to collapse
You can find it in here.

Adarsh balu said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Code:
C:\\Program Files\Minimal Adb and Fastboot
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
Code:
fastboot devices
After executing you can see a device if have connected.. If this happens we can carry on
Then type
Code:
fastboot flash recovery twrp.img
After this twrp will install on ur phone..
Now this
Code:
fastboot boot twrp.img
This will take the phone directly to the TWRP
There first u need to click on wipe >>advanced wipe>>select everything except your external sd (if u have one)>> Swipe
After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)
After completely copying Click on Install>> select the rom from the internal >> swipe
Then wait for the rom to flash..
After flashing wipe the davlik cache..
Also flash Gapps.. if u want root u can also flash supersu as well
Now reboot the phone ..n ..enjoy
Hit the button if u liked my post and also feel free to comment if u have any doubts (quote me or i wont know)..
Click to expand...
Click to collapse
thank you so much. already tried many solution, and then i found yours and voila, worked like a charm. :good::good:

raizelvaizen said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
After executing you can see a device if have connected.. If this happens we can carry on
Then type
After this twrp will install on ur phone..
Now this
thank you so much. already tried many solution, and then i found yours and voila, worked like a charm. :good::good:
Click to expand...
Click to collapse
Happy to help

Hello, I did as you describe but it tell me I can't copy the rom because of not enough storage...what should I do ?

duypro247 said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
After executing you can see a device if have connected.. If this happens we can carry on
Then type
After this twrp will install on ur phone..
Now this
Sir,what if i can still access twrp and recovery?
Click to expand...
Click to collapse
Then i suppose there is no issue here ... You can directly change your rom.:laugh:

nana0 said:
Hello, I did as you describe but it tell me I can't copy the rom because of not enough storage...what should I do ?
Click to expand...
Click to collapse
You should wipe your storage.. :good:

Adarsh balu said:
You should wipe your storage.. :good:
Click to expand...
Click to collapse
hello i have the same issue here that i my phone only booted to fastboot and i cant intall twrp because my usb debugging is turned off before this happened. pls help me

keirth1 said:
hello i have the same issue here that i my phone only booted to fastboot and i cant intall twrp because my usb debugging is turned off before this happened. pls help me
Click to expand...
Click to collapse
Is there an alternative recovery in that device. Can give attach images because i don't have this device right now so I can't help you without seeing what's on the device

Redmi Note 5 same problem?
Man thanks for sharing... But what if i face the same problem with RedmiNote 5? Which files should I use?

"After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)"
How can I copy the Rom File since internal memory has no ROM and can't copy ROM file from PC to Mobile storage during TWRP and FASTBOOT state!

hi i have problem with cant load boot thingy, help???

Can't download CM14 from the link provided
Hey,
It seems that the link for CM14 doesn't work.. Could you lease send me the valid one? Many thanks!

Redmi note 5 pro(whyred) A sad story
Sir in my case I unlocked the bootloader and installed ressurection remix v7 using RedWolf recovery but the system did not boot up instead it kept on booting into fastboot mode. I thought of installing some other rom via rw recovery but I was unable to access the internal storage or external_sd via rw recovery.I even tried twrp recovery but my phone was not being detected in my pc..I want to know why...Why I was not able to use MTP to transfer files to my phone... Luckily I had an escape route feom my demise and it was the Mi Flash tool...I locked my bootloader again and now I am too scared to mess with anything on my phone....

Database Develop

welcome