Related
Hi,
As my title suggests, I'm a bit new with all of this, and I'm still learning what is essential to do. I have downloaded ROM Manager, SuperUser, and a terminal. Is there anything else I forgetting to do? I know I should make a backup of what I am running now, but I am a bit uncertain of how to do so. Do I just use ROM Manager for that? Any help is appreciated.
Thanks
First, flash ClockworkMod using ROM Manager. Then, reboot into recovery mode and select "reinstall packages". Once you have ClockworkMod installed, you can make a backup through ClockworkMod.
Download Odin3 one-click here: http://forum.xda-developers.com/showthread.php?t=731989
Then, install the drivers mentioned on the page. Odin3 is a very useful tool to get your phone back to stock if you brick it. Always flash back to stock with Odin3 and do a master clear with Odin3 before you flash a ROM.
When you want to flash a ROM, transfer the zip file to your internal sd card. Then, enter ClockworkMod and select the zip. ClockworkMod will then flash the ROM for you.
I hope that helps! Happy Flashing!
You should do a couple if things
Flash clockwork recovery
Open tom manager
Top option to flash clock work
Select captivate
Try to get into recovery
Turn phone off
Vol up & down & power, hold
Ar&t comes up, let go
Blue letters recovery
Volume down to scroll
reinstall packages power button to select
Phone boots
Repeat last two steps
Should boot into green letters clockwork recovery
reboot phone
Get into download mode
Power off
Remove bat, sim, and external sd
Plug usb into computer
Hold vol up & down, plug in usb
Should have orange android with shovel. You are in download mode. Pull battery reboot
Download this program (odin) if you have a windows pc
http://forum.xda-developers.com/showthread.php?t=731989
If you do not have the usb drivers installed you can find them on that thread.
Once downloaded open program, put phone into download mode with odin open. One of the boxes should turn orange and say com 1 disconnect pull battery
Odin is the program you use to flag stock, or recover from bag flash.
If you can not do any of these steps don't flash, you could end up in trouble and not be able to recover
Flashing roms is easy
Download rom, place on internal sd
Get into clock work recovery
Select option to install zip from sd
Select option to find zip
Find rom file select
Confirm selection
Put the phone down and watch the magic
Always flash with full battery, sim removed, external sd removed
hope this helps
Sent from my SAMSUNG-SGH-I897 using XDA App
How do you exactly open the Odin file? It's a RAR extension.
winrar or 7zip. i recommend 7zip
I use winrar, 7 zip works as well. Both are free online
Sent from my SAMSUNG-SGH-I897 using XDA App
Alright thanks for all your help. I used 7zip and was able to do all the steps correctly (Got to Odin, also can enter download mode), and backed up with TiBackup. So I flashed Assonance today and restored my apps, and it seems pretty nice. Thanks for all your help again.
last week
i used i9000 to download software with wifi
because the battey was low , so it turned off~
then i took another battery ...
but my i9000 stuck on "I9000" screen again and again ~
i flash 2.2 rom,but the problem still go on
my i9000 don't have external SD Card
because it has 16GB internal SD Card
my question is : 1.i can use recovery mode , download mode is good
but after falsh 2.2 rom it display this notice
"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)
something went wrong while doing the lagfix. sorry"
2.i use 2.1 rom to falsh ,then it display this
"date wipe failed"
then i can use recovery mode
but when i use :update.zip , it notice
"(I/O error)
" E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)"
could anyone help me pleeeeeeeeeease~~~~~
what'up with it?
The internal SD Card is bad? i need to change it ?
Help~~ ~
thanks a lot
So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App
snapper.fishes said:
So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes .i tick re-repartition , and it can't start after flashing 2.1 rom or 2.2 rom
somebody said "when some date is writing during the voodoo runing,at that time power off by accident could make SD Card block"
"E:\" can't wipe , how can i fomat E: partition ?
i'm keeping on wait
thank you
lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje
JJEgan said:
lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje
Click to expand...
Click to collapse
thank you very much ~
i'm not good at English , so "Eclair" means 2.1 rom ?
1. when it turn off i can't get in recovery mode ,so voodoo is enabled when i flashed 2.2 rom .
2. i used a software named "UC xunlei" to down a salmpe 720P RMVB video at that time . then it turned off.
3. clockwork recovery can't use . only samsung recovery mode can get in.
4. my i9000 was sending to Samsung service centre yesterday, but they said "maybe they can't repair it either"
"sigh................."
I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5 The file that has MODEM in its file name.. SORRY!!!!!
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.
anoneemooz~ thank you ~~
i'll try ~
i hope what you said can get my i9000 back~
anoneemooz said:
I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.
Click to expand...
Click to collapse
That solution looks fine but i'm in worst situation ever since i can't do this:
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
My phone is stuck in the fisrt screen.( with this text Samsung Galaxy s i-I9000)
i can't enter in download mode, i also noticed that even the battery icon doesn't show up i only get loading icon not the battery one. Please help.
damnit, i tried the method anoneemooz posted. But Odin just stops after a couple of minutes flashing, and gave me the error message: Couldn't write to...
I can go in download modus and in recovery mode, but i cannot flash a ROM. I tried a couple of 2.2.1 ROMS
it dispaly " DATA_LOOP=FALSE CACHE_LOOP=FALSE DBDATA_LOOP=FALSE BIND_DATE_TO_DBDATA=FALSE"
now, i still can't wipe or fomat my internal SD Card
notice"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)"
also it shows "Error mounting /mnt/sdcard/ android_secure!
Skipping format..."
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje
JJEgan said:
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje
Click to expand...
Click to collapse
Oops yeah sorry..copy pasted the wrong thing for that part.
To OP: It seems as though you have a dead internal SD unfortunately..Well I could be wrong.
3 Button Fix for any firmware of SGS:
http://forum.xda-developers.com/showthread.php?t=785201
To all who run into Odin problem:
SORRY!!! For PHONE it should be the file that says MODEM in its filename. Copy pasted wrong name.
Download jg5 from samefirmware.com
Close everything relatet to keys and nps. Check in the tray and close if its running there. Use Odin3 v 3.1 and make sure u put the files in the right place:
PDA=Code
Phone=Modem
CSC=CSC
As pit download 512.pit
Check repartition.
AFTER tgis put ur phone in download mode and connect it.
Thrn click start and let it do its thing. If it doesnt work just try 3 or 4 times. Always been able to fix the error u get like this
Edit: or just check this out:
url]http://forum.xda-developers.com/showthread.php?t=845708[/url]
Sent from my GT-I9000 using Tapatalk
Hi All:
My Sprint Tab P100 got some strange problems.
It's a second hand P100, Once i turn on the tab, it will warning with 3 Beebee, and nook & Amaza Mp3 & Market will report error.
Below warning will show up:
Amazon MP3_nook
“The application XXX has stopped unexpectedly, pls try again”
Market
"Attention:
An Error has occured, Please try again later."
After check, i found the original usr information still there.
(Gmail/Facebook account will try to sync with previous owner's ID. and i can not remove the account.)
What i have tried:
1) I have tried to WIPE using system recovery, after WIPE both data & Cache partition, issue still exist.
2) Perform the Samsung factory reset by enter *2767*3855# in the Memo, problem still there.
3)Format the SD card with Phone & Windows, still got problem
4) Flashed with the stock EA24 Rom from XDA(with Modem,using Odin), the problem still remain the same.
5)Flashed with DJ30, the problem still exist(Base/Fireware EA24).
6)Tried to install CWM, failed to boot up(Rooted before install CWM, after flash the Zimage to Kernal or recovery, some strings flush in the screen, then the tab hung at Samsung logo and reboot.)
I guess those problem was caused by some program information still remain in the internal storage, even after factory reset or flash with other ROM.
Can somebody help on this? Also prefer someone can help on how to install CWM
I am interesting that the OVERcome 2.01 Rom got a version to WIPE the internal storage, but the OVERcome rom are designed for GSMer. Can i tried to use it to clear my internal storage?
just installed Astro, the program will crashed when launch it
Can some one help on this topic?
I am suspecting my internal storage was locked to Non-Writable.
This might result CWM can not access the internal memory caused the failure of the installation.
Is it related to the Flash lock option in the Odin?
Check this thread..
http://forum.xda-developers.com/showthread.php?t=1133053
That has the stock files, and instructions to get root and CWM installed with the stock software. Using Odin to put the stock firmware (EA24) should wipe anything and everything off the tab and restore it to as if it were new out of the box. You also might want to wipe your sd card as it can cause issues with the CWM ext4 conversion.
Hi pvtjoker42 & All:
During the process of Kernel with CWM Recovery, i has been stopped @ step7
1) Download the zip file here
2) Unzip the file. You will need the file named zimage only.
3) Open Heimdall Frontend
4) Select Browse under Kernel and navigate to the file you downloaded in step 1 and select it
5) Press Start
6) The Tab will reboot, but will freeze on the Samsung logo. Turn it off and boot into recovery (Vol Up + Power)
~~~~~~~~~~~~~~~~~~~~
my tab failed here, no matter what you pressed, it doesn't go to CWM. Do u have any idea?
~~~~~~~~~~~~~~~~~~~~
7) CWM Recovery will attempt to back your tab up, but will fail. Don't fret.
8) Do a factory reset in CWM Recovery and reboot
9) You'll freeze on the Samsung logo again Turn it off and boot into recovery.
10) CWM Recovery will back your Tab up successfully.
11) You now have a CWM backup. Reboot.
12) Your auto rotate is broken.
13) Download the rotation file
14) Put it in /system/lib/hw and change the permissions to match the other items.
Can someone helps?
Today i tried 1 more things, Use a update.zip to update the tab from EA24 to EB28,before try this, i have tried OTA to EB28, it never success.
i download the update.zip from <forum.sdx-developers.com/index.php?PHPSESSID=99sdnmh5pm4rtuv39hk80f7du6&topic=13104.0;nowap> it seems to be official one, and the recovery is the stock version, but it failed again.
I start to believe that my internal storage has been locked, and data can not write in.
Is it possible to due to Fstab issue?
Pls helps to save my tab....
There is only one thing to do : return to stock. Carefully follow the guide. Don't do anything else to your tab, until you go through the restock steps :
http://forum.xda-developers.com/showthread.php?t=1133053
[SPRINT] Sprint Tablet Owners Thread (Root, ROM, Flash to stock, CWM Recovery)
The process reformats/repartitions your internal sd card, and sets the correct permissions. If this process fails, there is probably something wrong with the tab.
you might also try to select the option to repartition in Odin when going back to EA24. Then try the steps to get EB28 OTA update, and once you've got that up and running, you can try the update.zip to get to EF17 (gingerbread, as long as you don't need root)
I wouldn't. Try a different sd card
Sent from my Nexus S 4G using Tapatalk
Hi All:
Thanks for the advice.
I have tried to back to stock EA24 using odin, but the situation still ramain the same.
And it fail to OTA to EB28, the EB28 upgrade program will reboot the machine, and enter recovery model. but it will complete the program. also i have tried to put EB28 update.zip in the SD card, but also fail to upgrade to EB28.
I have repartition the phone by P100 serveral time using odin, also tried update Pit file. All failed.
I have format the SD card in Windows & then in Android, useless.
Now i have some clues:
In P1000 rom Roto-JME, there is Movinand.bin, this one got same name as the internal storage IC from samsung. i am thinking that file could be a file similar to partition table.
Can someone help to dump a "movinand.bin" for me from P100?
steps:
1)Get back to stock EA 24
2)Wipe Cache & factory data
3) Root it (Using superone click , you can find it here http://forum.xda-developers.com/showthread.php?t=803682)
4)Install terminal (i use better terminal) or using a ADB to connect to shell.
5)Type "su", check whether "$" change to "#" in the shell
6) Type “dd if=/dev/block/mmcblk0p2 of=/sdcard/movinand.bin bs=4096”
7) Find the Movinand.bin in the SD card
You can sent it to me by drop a email to [email protected]
If there is anything wrong, pls help to correct me
Thanks in advance
as some people is asking how did i fix the issue, just publish the information here.
I fixed the issue by replaced the internal storage (the chip), cost about US$ 30(RMB 200)
If anyone have better solution, just post here to share
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again
I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.
Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2
Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.
Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2
I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...
THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.
AND LINKS TO WHAT YOU NEED ......
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------
Red wipe error is because the problem is with the dbdata!
Install THIS FILE in the PDA section with ODIN and dont touch anything else!
DBDATA.RFS DOWNLOAD : If you need it
Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...
------------------------------------------------------------------------------------------------------------------------------------
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh! :silly:
Reboot Computer once installed for changes to take effect :good:
Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!
If you arent sure ... just ask
FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!
Use ODIN with PIT File
PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!
ODIN 1.85
ODIN FILES HERE
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...
VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE
Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*
Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone
Go into Download mode so that we can now root the Phone
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same again when you see S Logo on Phone unplug Cable
Close ODIN
Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want...
Reboot Phone when complete... DONE!
Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful
Rom I am currently using : Blue SAUROM JWB
Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues :good:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manually Install CWM (need to have Root in your phone)
Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...
Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)
Download FeaModRecovery : HERE
Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....
Exit ODIN..
Start Recovery ....
Install .. Reboot....Done
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU STILL RECIEVE THE : E: Failed to mount /sdcard
Try This :
Download This First SDFormatter (Windows)
1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD
..or Try and Format SD card in your Computer
If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER NOT CONNECTING TO PHONE VIA USB
Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >
Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.
Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!
Done.
DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP
Please Hit the Thanks Button if I helped you... :victory:
A.I.O Rescue & Recover : LINK
Android Solutions : LINK
Samsung Updates : HERE
Latest Official I9000 and I9000M Firmwares collection : LINK
Modems : LINK
Perka's File Stash : LINK
Z4ROOT APP : HERE
3 BUTTON COMBO FIX : HERE
SECRET CODES : HERE *Use at your own Risk!*
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10
Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged
Cyanogenmod 10 Download
Download Google Apps (Optional)
Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.
Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.
After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.
The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.
Select reboot system now from the Recovery mode to Restart the phone.
Usually first boot of the phone takes some time after flashing of new ROM so be patient....
Done!
Issues if you have any :
LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"
Galaxy S i9000 / 9001 Disassembly & Assembly
Will add more links when I can ...
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Snowhiter said:
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Click to expand...
Click to collapse
Your most welcome!
Will add more when i get the time...:fingers-crossed:
Added more useful Links.. should be everything you need
HI,
thank you for this huge How to!
I have big trouble to update my Device.
It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).
What do you recommend?
Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable
What are you trying to update to?
Using the Format tool try with USB Debugging ON
>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..
Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE
Press start....
Then just follow the rest to Root it...
Let me know if this helps
If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore
Thanks a lot. I pressed volume +... That was my fault.
Now runs CM 10.1 Nighlty with Helly Bean!
Tnak you
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
grA$ said:
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
Click to expand...
Click to collapse
Glad it helped
** Updated :victory:
New links added ... should cover everything!
This should be more than enough for anyone with problems with there S i9000 Phones
Re: [HOW TO GUIDE] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★
Thanks for the amazingly helpful thread. I had spent amazing amounts of time looking for a JVU bootloader an could not find it. Now i don't need to as your GB odin files fulfilled all my needs.
Now to test out whether your section on drivers will solve my issues of connecting post GB ROMd phone to my computer.
Sent from my GT-I9000 using xda app-developers app
Your welcome, if you dont need Kies in your computer get rid of it ....
Reboot computer afterwards then Install the Samsung USB Drivers and reboot PC again to take affect....
If Phone doesnt recognise follow the Tutorial on the link if USB not Recognised
Random thought .......Life is so good!
High WAF Wireless Inductive Charging Mod Step by Step Guide
Ok i am a little confused with your guide so decided to ask a few questions
i have read your guide down to after odin and this is where i got stuck
i downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
mazoshi said:
I downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
Click to expand...
Click to collapse
Re-Partition > ON
If you downloaded the ODIN Files all these are included in the files PDA / MODEM / CSC
HERE
What Rom are you coming from etc...
im useing what was on the phone and my phone is upto date so not sure