Related
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
lavorno said:
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
Click to expand...
Click to collapse
Do you have CWM installed?
tiskael said:
Do you have CWM installed?
Click to expand...
Click to collapse
no
lavorno said:
no
Click to expand...
Click to collapse
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
tiskael said:
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
The problem with your S4A is that it has a locked bootloader, so you can't flash firmware yourself, sorry!
Click to expand...
Click to collapse
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
If you don't want to go to Best Buy right away you can try flashing the firmware yourself.
http://forum.xda-developers.com/showthread.php?t=2629093
If you took the official OTA for 4.3, ML2, there is no known root exploit available. Odin is easy to flash with - there are 1 clicks that do all the hard work for you, all you have to do is put your phone into download mode and the app does the rest on your PC. Make sure you have the proper drivers installed. Best way I found was to download the software suite from Samsung for the phone. Without the proper drivers Odin won't see the phone (I found this out the hard way.)
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
lavorno said:
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
Click to expand...
Click to collapse
No worries, I heard they were pretty good in the US. Remember though, you can't root it on 4.3 (yet). If they've set it back to 4.2.2 then you can root again and not update to 4.3. If they've set it to 4.3 then either you will have to follow @Devo7v's instruction to flash back or wait it out as a root method is currently being worked on.
Bricked SGH i537
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Shabnur said:
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Click to expand...
Click to collapse
What firmware were you originally on.
Devo7v said:
What firmware were you originally on.
Click to expand...
Click to collapse
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Shabnur said:
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Click to expand...
Click to collapse
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Devo7v said:
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Click to expand...
Click to collapse
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Shabnur said:
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Click to expand...
Click to collapse
The MD5 is sort of like the fingerprint for the file, so you need the MD5 of the file you downloaded to match the MD5 that was posted in the thread. Download WinMD5Sum from the website here. Under File Name load the ML2 Odin zip package that you downloaded. WinMD5Sum will generate the MD5 of the file you downloaded and you can compare that to the MD5 the uploader posted in the thread. If the MD5's match then that means you downloaded exactly what was posted. If the MD5's don't match exactly, then you have a corrupted download and need to download it again.
Could someone provide a torrent for
N900AUCUBMI9_N900AATTBMI9_ATT.zip
I'm connected to the internet but I have intermittent signal so when I download off the website and I drop connection and have to start over. Would really appreciate it.
If you are not on ml9 this image will not do you any good but you can get it at sammobile also with kies
jerrycoffman45 said:
If you are not on ml9 this image will not do you any good but you can get it at sammobile also with kies
Click to expand...
Click to collapse
Could you explain why this image would do me no good?
If your phone was on a newer version like mj5 you can't downgrade because when Samsung does a upgrade of the software it blows efuses in the bootloader preventing you from downgrading
I am returning my note 4 and I have to set my phone back to stock everything like it came out the box. I was able to odin flash stock recovery but now i still have custom ROM and i think it set a knox counter im not sure.. is there not a full tar image to flash evertything back to the way it was out the box
re: stock N910T firmware
Hardcore69er said:
I am returning my note 4 and I have to set my phone back to stock everything like it came out the box. I was able to odin flash stock recovery but now i still have custom ROM and i think it set a knox counter im not sure.. is there not a full tar image to flash evertything back to the way it was out the box
Click to expand...
Click to collapse
You need to go to http://SamMobile.com and download the official
stock firmware for Samsung N910T and odin flash it.
Good luck!
SamMobile's downloads will literally take me almost a day.. some threads on here claim they are official stock firmware but like I said.. it kept my custom ROM
re: slow downloads
Hardcore69er said:
SamMobile's downloads will literally take me almost a day.. some threads on here claim they are official stock firmware but like I said.. it kept my custom ROM
Click to expand...
Click to collapse
It's not going to take you all day if you simply
create an account "free account" takes 1 minute.
Soon as you have an account the download link
will be different and it will be real fast.
The server for downloads are and will be totally
different if you have an account.
Good luck!
the only way you can download it is if you create an account.. which I have had one since the s4 but the download time is quite literally forever lol
they dont care about that
Oh gosh, I downloaded the firmware from Sammobile in like, an hour or so.
Just do it, better than getting an unofficial one from somewhere off the web.
Hardcore69er said:
SamMobile's downloads will literally take me almost a day.. some threads on here claim they are official stock firmware but like I said.. it kept my custom ROM
Click to expand...
Click to collapse
Hardcore69er said:
the only way you can download it is if you create an account.. which I have had one since the s4 but the download time is quite literally forever lol
Click to expand...
Click to collapse
Heres a link to my mediafire acct (no premium acct needed)
much better then 2+ hours
http://www.mediafire.com/download/8fn4xr6hu1mctwo/N910TUVU1ANK4_N910TTMB1ANK4_TMB.zip
I odin flashed & this took me right back to where I originally was
mrmondaynight said:
I odin flashed & this took me right back to where I originally was
Click to expand...
Click to collapse
Make sure you Factory Reset before or after you ODIN. I usually do it before ODIN to stock.
I'm also making a guide at the moment that will be posted in Development. Will be done in a few hours.
devynbf said:
Make sure you Factory Reset before or after you ODIN. I usually do it before ODIN to stock.
I'm also making a guide at the moment that will be posted in Development. Will be done in a few hours.
Click to expand...
Click to collapse
That fixed it :good::good:
Thank you!
Now I have to figure out why google services doesn't work when I root
mrmondaynight said:
That fixed it :good::good:
Thank you!
Now I have to figure out why google services doesn't work when I root
Click to expand...
Click to collapse
It will. Install all your apps then update it in the store.
I have tried a Kit seen in these forums, where I follow directions but it doesn't actually download the stock firmware, only the CSS of the website (weird?).
I have also tried to download the stockfirmware and do it via RSDLite, but, the firmware is going to take over 2 hours to download from filefactory and I think thats just an incredibly long time for that to download. My internet speed can support WAY faster than that.
I have a Sprint Moto X by the way XT1056 on 4.4.4. And I just want to get to complete stock. Unlocked bootloader but not rooted anymore.
Can anyone help?
Wait for the stock firmware to download and flash it using RSD Lite.
nhizzat said:
Wait for the stock firmware to download and flash it using RSD Lite.
Click to expand...
Click to collapse
Can you provide a link for it? Other than the above mentioned? It shouldn't take over two hours to download that file on my connection but I can't find another source.
DRatJr said:
Can you provide a link for it? Other than the above mentioned? It shouldn't take over two hours to download that file on my connection but I can't find another source.
Click to expand...
Click to collapse
There is a link to thread with some sources for SBF files in my signature.
Keep in mind, public file hosting sites like FileFactory, Mega, etc can sometimes be slow. The bottleneck is often at their end of the connection.
DRatJr said:
Can you provide a link for it? Other than the above mentioned? It shouldn't take over two hours to download that file on my connection but I can't find another source.
Click to expand...
Click to collapse
It shouldn't but what other choice do you have? Instead of waiting the 2 hours to let the download finish, you spent at least the past 5 days searching for a faster mirror instead. How much longer are you going to waste your time searching?
hey everyone...this is my first post on xda, i need a little help with my sisters in laws phone. basically shes got some crazy ex who has rooted her phone and im trying to fix it for her since hes making her life difficult. i can tell he has a custom bootloader installed. when i boot into recovery its odin not the normal bootloader. i can still boot into download mode but the phone wont boot up...when it does it just says that the firmware update encountered a problem and to use kies in recovery. im not super technically saavy but have flashed a tablet or too. nothing major. any help would be greatly appreciated. i just want this thing back to stock bootloader and firmware like when it came from att. does that sound like its possible. i tried to use some write ups i found online to rewrite the stock firmware and thats when it quit booting up. thanks in advance for any help people!
wigglesrewind said:
hey everyone...this is my first post on xda, i need a little help with my sisters in laws phone. basically shes got some crazy ex who has rooted her phone and im trying to fix it for her since hes making her life difficult. i can tell he has a custom bootloader installed. when i boot into recovery its odin not the normal bootloader. i can still boot into download mode but the phone wont boot up...when it does it just says that the firmware update encountered a problem and to use kies in recovery. im not super technically saavy but have flashed a tablet or too. nothing major. any help would be greatly appreciated. i just want this thing back to stock bootloader and firmware like when it came from att. does that sound like its possible. i tried to use some write ups i found online to rewrite the stock firmware and thats when it quit booting up. thanks in advance for any help people!
Click to expand...
Click to collapse
Scroll down to the notes section in the OP of this link. http://forum.xda-developers.com/showthread.php?t=3149146
Grab ye file from step for and follow instructions. If she is rooted then this will work. It'll take her back to 4.4.2 unrooted.
dirtydodge said:
Scroll down to the notes section in the OP of this link. http://forum.xda-developers.com/showthread.php?t=3149146
Grab ye file from step for and follow instructions. If she is rooted then this will work. It'll take her back to 4.4.2 unrooted.
Click to expand...
Click to collapse
Thanks for taking the time to help with this issue. that file didnt work, i flashed the G900A_OC4_Stock_Partitions firmware and its at least working again. thanks again to everyone who looked and especially dirtydodge for taking time.
Phone is working again guys but was wondering if anyone knows why it keeps giving me this security notice pop up...says that unauthorized actions have been detected and gives me the option to restart or cancel. Sounds like it has something to do with KNOX from my searching. Trying to solve this without rooting. When i check the KNOX counter in D/L mode it says 0x0. Ive updated firmware and security updates to latest versions and it hasnt helped. Anyone have any pointers? As always any help is greatly appreciated. Searched around the web and xda and didnt find what i was looking for.
@wigglesrewind. Chances are is that the phone is still rooted and that's why your getting the notification. Go to the pay store and download "root checker" and see what it says. Also what is your version & baseband. I'm not sure why the "downgrade to nce" file didn't work for you. It might have been a bad download but you should be able to use it if your still on 0C4.
Thanks again dirtydodge for contributing. I did a check with root checker and it says root is not installed. Also used terminal emulator and get a dollar sign in the terminal, not the hash tag. Any ideas?
wigglesrewind said:
Thanks again dirtydodge for contributing. I did a check with root checker and it says root is not installed. Also used terminal emulator and get a dollar sign in the terminal, not the hash tag. Any ideas?
Click to expand...
Click to collapse
I'm not familiar with terminal emulator. The only time I've ever gotten the notification that you talking about is when i have root apps on the phone and certain things aren't froze. But you need to be rooted and have titanium backup to freeze them. What version is on the phone.
Sorry, forgot to add that in the last post...
Baseband version oc4
Kernel 3.4.0
Build number LRX21T.G900AUCU4BOF3
Let me know if you need any other info. Like i said im not very experienced in this
But thanks again for your help. Its greatly appreciated.
wigglesrewind said:
Sorry, forgot to add that in the last post...
Baseband version oc4
Kernel 3.4.0
Build number LRX21T.G900AUCU4BOF3
Let me know if you need any other info. Like i said im not very experienced in this
But thanks again for your help. Its greatly appreciated.
Click to expand...
Click to collapse
Ok well it sounds like your on the latest firmware version. The phone may still have a trace of root somewhere. After you flashed the oc4 Kernel did you do a factory reset. Other than that I'm not sure what to do. But that does explain why you can't use the "downgrade to nce" file. The oc4 build can not be downgraded. I'd do a factory reset from the stock recovery menu and then wipe the cache. If that don't fix it then I'm out of options. Lol. Hope this helps.
Ive tried everything you mentioned except wiping the cache so I'll give that a try. Cross your fingers for me!
you flashed oc4 firmware which is why your baseband is oc4 (baseband is modem.)
What you need to do is download and odin a full odin tar file.. this will wipe everything clean and make it brand new...
Sent from my SM-G925V using XDA Free mobile app
If i were to find a full tar file would i just use the ap box in odin or would i have to do it differently? Usually those full dowloads have multiple files in them (BL and whatever the other ones are... CS maybe? Cant remember and not near the computer right now. Is that what your talking about?
wigglesrewind said:
If i were to find a full tar file would i just use the ap box in odin or would i have to do it differently? Usually those full dowloads have multiple files in them (BL and whatever the other ones are... CS maybe? Cant remember and not near the computer right now. Is that what your talking about?
Click to expand...
Click to collapse
Yup.. youre build is of3 or w.e which to my knowledge not downgradeable.. if you dont plan on keeping it rooted then you can flash latest full tar in odin using the AP slot..
I would recommend trying the oc full tar first if you plan on rerooting it.. the full tar will have multiple files including system, csc, boot etc.
Sent from my SM-G925V using XDA Free mobile app
Thanks alot! I'll find a full tar on here and odin it and see if that fixes it
does anyone have that oc4 one click file or know where i can find it. see it in my searchs but its always the same google drive share and they all say the file doesn't exist.
what do you mean one click?
elliwigy said:
what do you mean one click?
Click to expand...
Click to collapse
G900AUCU3BOC4_OneClick..exe was the file name i kept coming across with links to a google drive account but the file is no longer on there. I'll keep looking. I appreciate you guys lending a hand. I know it can be frustrating trying to help someone with limited understanding of something remotely. You guys are great.
wigglesrewind said:
G900AUCU3BOC4_OneClick..exe was the file name i kept coming across with links to a google drive account but the file is no longer on there. I'll keep looking. I appreciate you guys lending a hand. I know it can be frustrating trying to help someone with limited understanding of something remotely. You guys are great.
Click to expand...
Click to collapse
i understand.. just dont know if thatll work for you lol.. you need a full odin tar.. the one click might just be for root.. try to find a full oc4 tar file