Hello i saw some kernel of omar but they are file .img and no file .zip. So I don't Know to as install this in my phone.
I think to use the cwm , but I have scary to become some problem on my phone.
So how can I istall this??
This should help.
Related
Hi all guys!
I've searched into the whole forum and Internet but I cannot find an answer to my question.
After the FeaMod Recovery installation I know I can return to stock recovery by installing a stock ROM. This is a great thing.
But what about restoring stock recovery without installing the whole ROM?!?! Is it possible?!
Sorry if my question has an answer in the forum yet... I really can't find it.
Thank u very much!!!
If you extract original recovery from a stock rom you can dd it to your device. Or you take the stock recovery.img and modify the flashable cwm zip by replacing cwm recovery.img with stock recovery.img and flash that with cwm.
Sent from my GT-I9001 using XDA App
Hi. First of all TY for ur reply.
Then for this I need some help 'cause I've read hundreds of guides and wikies but I'm not really a master!
1) Ur first tip seems a little dangerous! Anyway how can I extract the recovery from stock ROM with dd?! Has to be the phone rooted?! Or adb it's enough?!
2) Ur second tip seems to be better! But where I can take the stock recovery.img?
And then, after replacing it in the CWM zip I've to do something else before flashing zip from sdcard?!
Really thank you for your tips!
The attached file should reflash the stock XXKPU recovery to your 9001. Tested and works with FeaMod 1.4.
Hi wintel.
Thanks for your reply.
Only last question, I promise!!!
May I use the file u posted with every ROM I've installed or it has to be used only with XXKPU ROM?!?!
Sorry, but I quiet new with Galaxy world!!!
mylostnick said:
Hi wintel.
Thanks for your reply.
Only last question, I promise!!!
May I use the file u posted with every ROM I've installed or it has to be used only with XXKPU ROM?!?!
Sorry, but I quiet new with Galaxy world!!!
Click to expand...
Click to collapse
the stock recovery is the same and should be ok for all roms.
this issue was already discussed in I9001 Q&A thread and in the Feamod thread, wintel made it easy for u and gave u a flashable zip,u could replace the recovery.img also through adb or terminal emulator with dd code.(assuming the recovery.img is in the root of internal sd). (keep this code somewhere in case u need it another time)
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
reboot
odin
just flash a stock rom
pascal1990 said:
just flash a stock rom
Click to expand...
Click to collapse
DID YOU READ THE FIRST POST AT ALL?????
mylostnick said:
.... I know I can return to stock recovery by installing a stock ROM. This is a great thing.
But what about restoring stock recovery without installing the whole ROM?!?! Is it possible?!....
Click to expand...
Click to collapse
Please read before posting
pls help
wintel_mac said:
The attached file should reflash the stock XXKPU recovery to your 9001. Tested and works with FeaMod 1.4.
Click to expand...
Click to collapse
I met a problem which I can not get out my phone SGS i9001. I tried to do an upgrade to v4 android. when he stayed on the phone for almost an hour with the CyanogenMod logo and not do anything. Now when I turn my phone straight into recovery mode. and down the screen I write this: CMW-based Recovery v5.5.0.4 and E: can t mount / cache / recovery / command.
E: can t mount / eMMC. I mention that I can put it in download mode. but every time I tried to do something with odin I failed. please and hope you can help me. Thanks in advance.sorry for my English
Hey,guys
I tried to get .zip files for two times,from Arky's ROM 2.1 and Moonrom V4.0,then flash them with recovery.but no work.
I installed JDK6,and downloaded Pdroidpatcher v1.32.anybody can help me?thanks a lot.
My Phone is sanmung GT I9001
and more question:after I backup rom with recovery,how to change it into .zip file.thank you very much.
You tried to install it with CWM or with stock recovery?
annqx said:
You tried to install it with CWM or with stock recovery?
Click to expand...
Click to collapse
yeah,buddy....I using CWM_5.0.2.8-2
Eric_cn said:
Hey,guys
I tried to get .zip files for two times,from Arky's ROM 2.1 and Moonrom V4.0,then flash them with recovery.but no work.
I installed JDK6,and downloaded Pdroidpatcher v1.32.anybody can help me?thanks a lot.
My Phone is sanmung GT I9001
and more question:after I backup rom with recovery,how to change it into .zip file.thank you very much.
Click to expand...
Click to collapse
kindly please direct your query to Arky's thread and the Moonrom thread with regards to flashing the respective roms... lets help make the DEV section clean.... Thanks....
To answer your question : as per instructions on those threads... make sure you flashed CWM recovery or FeaMod recovery (1.2 or 1.4) before you can flash any CWM based rom. I think moonrom v.4 uses the new KQB rom so you have to flash it first via odin then install CWM / FeaMod recovery to flash the said rom...
Hi Guys,
I've been trying to install CWR on my samsung GT-i9000 all day but the result is my phone doesnt boot anymore.
I can boot to download mode so that at least positive
I've tried to follow the guide i've linked below but the problem is I cant download the rom he refers to.
http://forum.xda-developers.com/showthread.php?t=1379650
I installed the CWR from his guide but I cant start into recovery to install a ROM
All the ROMS is see in development are zip files (and i need recovery for this i think) and there are not TAR files
I hope some1 can put me in the right direction.
Thanks a lot!
Kind regards,
Jesse
jessess said:
Hi Guys,
I've been trying to install CWR on my samsung GT-i9000 all day but the result is my phone doesnt boot anymore.
I can boot to download mode so that at least positive
I've tried to follow the guide i've linked below but the problem is I cant download the rom he refers to.
http://forum.xda-developers.com/showthread.php?t=1379650
I installed the CWR from his guide but I cant start into recovery to install a ROM
All the ROMS is see in development are zip files (and i need recovery for this i think) and there are not TAR files
I hope some1 can put me in the right direction.
Thanks a lot!
Kind regards,
Jesse
Click to expand...
Click to collapse
http://d-h.st/J6r
Thanks a lot fazbarulho!
I opened the file and see there is also a recovery option.
I assume I have to flash the rom first with odin and use the following files:
s1_odin_20100512.pit
CSC_JW4.tar
PDA_JW4.tar
PHONE_JW4.tar
And after that reboot and flash using:
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
Is this correct?
EDIT: I can confirm that this method works for other people who want to install CWR.
fazbarulho really nice from you to help me, thanks again!
Regards,
Jesse
hey there, any one help me
i was generating pre rooted flashable.zip of Xperia 5.1.1 ftf
but i encountered the error could not sign the zip ...help me to solve this problem!!
and will there be any problem if i flashed the flashable.zip without signing????
No mate, but don't use the CM recovery to flash.. Use TWRP or CWM..
hagar006 said:
No mate, but don't use the CM recovery to flash.. Use TWRP or CWM..
Click to expand...
Click to collapse
thankx bro...i have done flashing....it worked...:good:
The developer is aware of the problem and is looking to fix it in the next version.
It happens if all the required files are not in the same directory.
OK guys and gals I need help with a kernel flashing problem. I want to take the kernel from a rom and use it in another rom. I'm not going to name roms just that they are compatible roms. Here's what I did. I extracted the boot.img file from a rom. Then boot in twrp and flash the img file then flashed supersu 2.79. Reboot but I always get stuck in bootloop. What am I doing wrong?
Sent from my SM-N920K using Tapatalk
crazynewfie said:
OK guys and gals I need help with a kernel flashing problem. I want to take the kernel from a rom and use it in another rom. I'm not going to name roms just that they are compatible roms. Here's what I did. I extracted the boot.img file from a rom. Then boot in twrp and flash the img file then flashed supersu 2.79. Reboot but I always get stuck in bootloop. What am I doing wrong?
Sent from my SM-N920K using Tapatalk
Click to expand...
Click to collapse
Then it would appear that the kernel is unsupported on the other rom, for example you can't take a stock kit Kat roms kernel and use it with CyanogenMod roms. However without logs, no one is going to really be able to tell you what's really wrong..