Related
Hi guys, I'm new on the forum and I'm Italian.
I installed the ginger dx v20 on my x8 but I noticed that there is no multi-touch.
What should I do to get it?
PS sorry for my bad english
joker950 said:
Hi guys, I'm new on the forum and I'm Italian.
I installed the ginger dx v20 on my x8 but I noticed that there is no multi-touch.
What should I do to get it?
PS sorry for my bad english
Click to expand...
Click to collapse
have u flashed the addon modules for stock kernel..?
joker950 said:
Hi guys, I'm new on the forum and I'm Italian.
I installed the ginger dx v20 on my x8 but I noticed that there is no multi-touch.
What should I do to get it?
PS sorry for my bad english
Click to expand...
Click to collapse
Do the same as the guy above me.
Flash the modules zip file from the GDX thread.
**FLASH IN CWM!!!!**
Reboot and enjoy
Leave a thanks if I helped!
maliceomalice said:
have u flashed the addon modules for stock kernel..?
Click to expand...
Click to collapse
I don't know, I put the .zip file into memory card and I flashed the rom with xrecovery
joker950 said:
I don't know, I put the .zip file into memory card and I flashed the rom with xrecovery
Click to expand...
Click to collapse
GINGERDX v20 should NOT be installed with xRecovery!!!!!!
Leave a thanks if I helped!
Also, as said, if you're still using the stock kernel, you'll need to flash it apart.
Means you need to download X8Gesture (Synaptics) or AX8MT (Cypress).
Install tool box you have a detection phase if you have synaptics or Cypress. Search the forum for it.
maliceomalice said:
have u flashed the addon modules for stock kernel..?
Click to expand...
Click to collapse
how about if use kernel dx?
I got multitouch on my GingerDX v20. Install Flashtool to your PC. And in nstall the GordonsGate drivers. You can read how to unlock it on this specific thread.
You will need the alfs kernel for the multitouch Here it is follow the instructions there.
You will have to follow the instructions in every thread, if you dont you will brick your phone and we wouldnt want that
UserWith-A-Cupcake said:
I got multitouch on my GingerDX v20. Install Flashtool to your PC. And in nstall the GordonsGate drivers. You can read how to unlock it on this specific thread.
You will need the alfs kernel for the multitouch Here it is follow the instructions there.
You will have to follow the instructions in every thread, if you dont you will brick your phone and we wouldnt want that
Click to expand...
Click to collapse
you ment to say dual-touch? or you have multi-touch?
If i put it like this i have the ability to interact with only 2 fingers so yes i got dual touch thanks for correction
Sent from my X8
Sorry guys but I'm very noob, I did not understand what to do.
The first time I flashed the rom with xrecovery because I followed a Italian guide.
Now I want to flash it again but I want the exact instructions.
Can someone add me on facebook, msn or gtalk to talk quietly? Or explain me step by step how to correctly flash the rom with the multy touch?
IrishStuff09 said:
GINGERDX v20 should NOT be installed with xRecovery!!!!!!
Click to expand...
Click to collapse
can you tell me why not?
try to flash custom kernel.
1.unlock bootloader.
http://forum.xda-developers.com/showthread.php?t=1254225
2.flash kernel
http://www.youtube.com/watch?v=qw9GFpt9iFQ
custom kernel can be found at this tread
alfs-http://forum.xda-developers.com/showthread.php?t=1340861&highlight=alfs
nAa-http://forum.xda-developers.com/showthread.php?t=1350484
LinuxDx-http://forum.xda-developers.com/showthread.php?t=1267747
this is because all kernel already included with multitouch module.
click thanks if i help.
please correct me if im wrong.
---------- Post added at 10:05 AM ---------- Previous post was at 10:02 AM ----------
joker950 said:
Sorry guys but I'm very noob, I did not understand what to do.
The first time I flashed the rom with xrecovery because I followed a Italian guide.
Now I want to flash it again but I want the exact instructions.
Can someone add me on facebook, msn or gtalk to talk quietly? Or explain me step by step how to correctly flash the rom with the multy touch?
Click to expand...
Click to collapse
im sorry.this is no offend.
im suggest you to follow english guide.because it more easy actually.
if u cant understand the word.just use google translate.
it will help u.
have you made it work?
Just install x8gesture.ko
Thether wifi and multitouch on X8.
Hi guys, I've just load GingerDX v23 over my Floyo.
It seems work fine, but no multitouch nor Wifi Thether work.
Does it probably depend on kernel? ([email protected]#1)
I think I've to load "update_GingerDX-Alfs-addon.zip" with CWM recovery. Is it wright? menu: "apply update from sdcard"?
Thanks a lot!
i badly needed a custom rom for my v20g as there is no other way to downgrade my fw right?
akosilek said:
i badly needed a custom rom for my v20g as there is no other way to downgrade my fw right?
Click to expand...
Click to collapse
Sorry if I don't understand you, but what mean "fw"?
Mexickano said:
Sorry if I don't understand you, but what mean "fw"?
Click to expand...
Click to collapse
firmware
you can flash your phone with smartflashtool if you want to downgrade
You can download from this link that you want
http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+Black&paese=IND/INDIA&id_mod=1
Press THANKS button if I helped
Hi, question, where i can download the Gapps file of this thread.
http://forum.xda-developers.com/showthread.php?t=2041960
Thanks in advance.Sorry, I'm new here, so its hard for me understand what they mean. Thanks again. Hope you can help me.
khent23 said:
Hi, question, where i can download the Gapps file of this thread.
http://forum.xda-developers.com/showthread.php?t=2041960
Thanks in advance.Sorry, I'm new here, so its hard for me understand what they mean. Thanks again. Hope you can help me.
Click to expand...
Click to collapse
See which ROM you are using, then download the one that suits for ROM
sekhar13515 said:
See which ROM you are using, then download the one that suits for ROM
Click to expand...
Click to collapse
Thanks for the reply. I have my OB V20B. Im searching for LG Forum for release of ICS, but I think til now, no ICS release for LG.
And I found this site, Sorry if I can't answer your question on which ROM I am using.
Those gapps is only for 4.1 and up.
Sent from my phone powered by cm10, Thanks to RC
RomWiz said:
Those gapps is only for 4.1 and up.
Sent from my phone powered by cm10, Thanks to RC
Click to expand...
Click to collapse
So can you please give me a link how to upgrade my gingerbread to ICS?
Thanks!
khent23 said:
So can you please give me a link how to upgrade my gingerbread to ICS?
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2031161
Go there and download the (Bin/Fls: http://d-h.st/Zu7) files and flash the files with Smartflash Tool
The process of flashing .bin files with smartflash tool is here (http://forum.xda-developers.com/showthread.php?t=1448803)
First read the post carefully and some comments for few pages, then flash...:good:
hello everybody!
I never use different rom from when I bought my s advance so I don't know what to do.... I read some istructions for root, install mod ect... b...ut I'm scared to lock my phone.... I never did nothing with it, no root ect.
From my menu:
Code model: GT-I9070
Android Version: 2.3.6
Version banda base(don't know in english, I'm italian xD): I9070XXLK2
Kernel version: 2.6.35.7-1211579
[email protected] #2
SMP PREEMPT Thu Nov 15 20:22:18 KST 2012
Build version: GINGERBREAD.XXLK2
Never did Recovery or something, please help me to install Omnirom or any difference rom (stable, accept suggestion )
mendo92 said:
hello everybody!
I never use different rom from when I bought my s advance so I don't know what to do.... I read some istructions for root, install mod ect... b...ut I'm scared to lock my phone.... I never did nothing with it, no root ect.
From my menu:
Code model: GT-I9070
Android Version: 2.3.6
Version banda base(don't know in english, I'm italian xD): I9070XXLK2
Kernel version: 2.6.35.7-1211579
[email protected] #2
SMP PREEMPT Thu Nov 15 20:22:18 KST 2012
Build version: GINGERBREAD.XXLK2
Never did Recovery or something, please help me to install Omnirom or any difference rom (stable, accept suggestion )
Click to expand...
Click to collapse
From Omni ROM thread:
Installation
Download the ROM from the link below
Download gapps for 4.3 on http://goo.im/gapps
Put the zip files on your SDCard
Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose Omni zip file
Choose GApps zip file
Reboot to system
It can be installed from stock recovery.
But after that, if you want to go back to stock you will need to flash stock firmware with Odin. You have guide for Odin in Developer section of our forum.
P.S. Oh, you are on GB still. I will post you guide to go to JB first.
Here:
http://forum.xda-developers.com/showthread.php?t=2198341
Go with A).
Tell him to upgrade to Jelly Bean first.
Powered by CM10.2
shut_down said:
From Omni ROM thread:
Installation
Download the ROM from the link below
Download gapps for 4.3 on http://goo.im/gapps
Put the zip files on your SDCard
Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose Omni zip file
Choose GApps zip file
Reboot to system
It can be installed from stock recovery.
But after that, if you want to go back to stock you will need to flash stock firmware with Odin. You have guide for Odin in Developer section of our forum.
P.S. Oh, you are on GB still. I will post you guide to go to JB first.
Here:
http://forum.xda-developers.com/showthread.php?t=2198341
Go with A).
Click to expand...
Click to collapse
ok, so first I need to upgrade to JB then Omni... question, it will be 4.4 kitkat version? I read cm11 will and if I upgrade to omni can I upgrade to cm11 if I want???
sorry for my english...
mendo92 said:
ok, so first I need to upgrade to JB then Omni... question, it will be 4.4 kitkat version? I read cm11 will and if I upgrade to omni can I upgrade to cm11 if I want???
sorry for my english...
Click to expand...
Click to collapse
Yes, you can update it later. Just like you did with this Omni.
shut_down said:
Yes, you can update it later. Just like you did with this Omni.
Click to expand...
Click to collapse
Last thing (I think)!! If I will have problems what I need to do for return to gb? like phone don't turn on ect... I have my phone in assurance.
mendo92 said:
Last thing (I think)!! If I will have problems what I need to do for return to gb? like phone don't turn on ect... I have my phone in assurance.
Click to expand...
Click to collapse
How to downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
You have I9070 not I9070P? If that is right, than you can use this method.
shut_down said:
How to downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
You have I9070 not I9070P? If that is right, than you can use this method.
Click to expand...
Click to collapse
Hmm don't know... how can I look for that???
mendo92 said:
Hmm don't know... how can I look for that???
Click to expand...
Click to collapse
Do you have NFC and 16GB internal memory?
I think XXLK2 is I9070, and not I9070P. It probably is written on phones box too.
shut_down said:
Do you have NFC and 16GB internal memory?
I think XXLK2 is I9070, and not I9070P.It probably is written on phones box too.
Click to expand...
Click to collapse
Please don't hate my what is NFC xD? anyway I think I have phone memory, sd memory (8gb I think) and external sd....
I found information about it and I think that only TIM s advance have it in Italy and I bought it without card so it's I9070???
mendo92 said:
Please don't hate my what is NFC xD? anyway I think I have phone memory, sd memory (8gb I think) and external sd....
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Near_field_communication
eduds said:
http://en.wikipedia.org/wiki/Near_field_communication
Click to expand...
Click to collapse
I think link for Omni is not working... someone can post here download links step by step please... I'm a noob -.- I have GB... Thanks all for replies!
mendo92 said:
I think link for Omni is not working... someone can post here download links step by step please... I'm a noob -.- I have GB... Thanks all for replies!
Click to expand...
Click to collapse
Read my first post here, after P.S.
But first make sure if you have P or non P phone. You can hardbrick. You can't just guess.
shut_down said:
Read my first post here, after P.S.
But first make sure if you have P or non P phone. You can hardbrick. You can't just guess.
Click to expand...
Click to collapse
How can I check for it???
edit: Don't know if I have nfc, there is any app for check???
mendo92 said:
How can I check for it???
Click to expand...
Click to collapse
I am on CM now, and I can't remember how it was on GB. Can you make screen shot of About phone and post it here.
shut_down said:
I am on CM now, and I can't remember how it was on GB. Can you make screen shot of About phone and post it here.
Click to expand...
Click to collapse
I wrote all in the first post but I'll look for other informations.
mendo92 said:
I wrote all in the first post but I'll look for other informations.
Click to expand...
Click to collapse
Oh, ok.
Code model: GT-I9070
You have non-P version. So when you download JB firmware use only I9070. Do not install I9070P firmware.
shut_down said:
Oh, ok.
Code model: GT-I9070
You have non-P version. So when you download JB firmware use only I9070. Do not install I9070P firmware.
Click to expand...
Click to collapse
Ok thanks!!! tonight I'll download all files, I hope that I will download the right files o.o thanks very much for the help!
step by step is: download and install jb - download and install mod with recovery...
mendo92 said:
Ok thanks!!! tonight I'll download all files, I hope that I will download the right files o.o thanks very much for the help!
step by step is: download and install jb - download and install mod with recovery...
Click to expand...
Click to collapse
Download JB firmware, install it with Odin. Downalod Omni rom, install it from recovery. No need to root or anything else.
Can anyone please create a cwm flashable stock rom GB 2.3.6????
aroradevesh said:
Can anyone please create a cwm flashable stock rom GB 2.3.6????
Click to expand...
Click to collapse
i think there no are
but search for roms based on stock
there are many
Sent from my GT-S5570 using xda premium
Some help
I dont know if this can help you but, here is a great tutorial to go back to stock 2.3.6. ( http://forum.xda-developers.com/showthread.php?t=1255305 )
Since the hotfile page is shut down, here is a link to download working firmware (I am using it) http://getwapi.com/down/dir/rar/IGw...&dsid=3oh7jy.ca13a2a94308e8caeecddd9a2dad0f9a
Heads up. If you have a gt s5570l then unfortunately, this will not work, and you can end up with a bricked phone. Hope I helped
Damir_zlaTu said:
I dont know if this can help you but, here is a great tutorial to go back to stock 2.3.6. ( http://forum.xda-developers.com/showthread.php?t=1255305 )
Since the hotfile page is shut down, here is a link to download working firmware (I am using it) http://getwapi.com/down/dir/rar/IGw...&dsid=3oh7jy.ca13a2a94308e8caeecddd9a2dad0f9a
Heads up. If you have a gt s5570l then unfortunately, this will not work, and you can end up with a bricked phone. Hope I helped
Click to expand...
Click to collapse
Actually i want to go back to stock rom... but whenever i flash the firmware via odin it fails.... i dont know why.... currently i m using cm11... And ya i have GT-S5570
dont know :\
aroradevesh said:
Actually i want to go back to stock rom... but whenever i flash the firmware via odin it fails.... i dont know why.... currently i m using cm11... And ya i have GT-S5570
Click to expand...
Click to collapse
When I flashed my mini back to stock, I was on cm7. backup your stuff, flash to cm7, and then try :\
Sorry I cant help you a lil bit more.
Hope you will get it working.
Thanks
Damir_zlaTu said:
When I flashed my mini back to stock, I was on cm7. backup your stuff, flash to cm7, and then try :\
Sorry I cant help you a lil bit more.
Hope you will get it working.
Click to expand...
Click to collapse
Thanks for your help.... actually earlier i was not following the correct procedure.... thanks for ur help and sorry for disturbing
aroradevesh said:
Thanks for your help.... actually earlier i was not following the correct procedure.... thanks for ur help and sorry for disturbing
Click to expand...
Click to collapse
I'm just glad I helped