I did a factory reset on my rooted Bionic. I deleted the setupwizard thinking it would bypass setup and boot t and Now I'm getting a sett up error Unfortunatley, com.motorola setupwizard. controller has stopped.
What can I do to stop the pop up and boot to the phone?
I went into apps and forced closed setup up controller. pop up still showing up.
Shut down the phone and start it up again. On the Welcome screen, use the 4-corner bypass. Tap the upper-left corner below the status bar, then upper-right the same way, lower-right but actually somewhat to the left going closer to the emergency call button, then lower-left similar to the previous one. After you've done this, you can continue with setting up the phone then fix the problem once you are past the setup screens.
If it doesn't work for you the first time, just keep trying until you figure out the locations to tap. Once you figure it out, it should be easy to do it any future times that you need it.
on reboot
ShadyDreamer said:
Shut down the phone and start it up again. On the Welcome screen, use the 4-corner bypass. Tap the upper-left corner below the status bar, then upper-right the same way, lower-right but actually somewhat to the left going closer to the emergency call button, then lower-left similar to the previous one. After you've done this, you can continue with setting up the phone then fix the problem once you are past the setup screens.
If it doesn't work for you the first time, just keep trying until you figure out the locations to tap. Once you figure it out, it should be easy to do it any future times that you need it.
Click to expand...
Click to collapse
ap fastboot flash mode (bootfailure)
Invalid otv sp
Invalid hab
Invalid otv
.
I have flashed roms and im getting install errors using rds lite 6/22 phone return errors
I would like to just flash to cyanogen rom 10.2.1 I don't care about factory rom . if I need to I will do that also.
I have tired many different stock rom versions and still getting the phone return errors. Please help.
UPdate on reboot error
As of right now the phone turns on the Boots through the Motorola stock red sign swirling red with robotic arms animations. after the animations
No welcome screen. to bypass just the pop up error. Unfortunately.commotorola setupwixard.comtroler has stopped. and a ok button
I have pushed the ok buttong a lot and nothing.
I am ably to use the pull down menu to get to the settings.
What can I do no
any fixes yet?
FXZ it if you want to. Can you just flash a custom ROM on top?
Sent from my GT-P3110 using Tapatalk
fix
Use the appropriate fxz build for your bionic with rsd lite On your PC with your Motorola USB cord and updated Motorola drivers.
Related
First off, I've read/tried using software from thread: http://forum.xda-developers.com/showthread.php?t=442480
I found the phone in the subway. when i power it up it goes to the default boot menu.
I don't know anything about the phone. Could be UK, US, AUS, PVT, or DVT.
I can't get to the rainbow screen (fastboot) found when pressing while device is off (holding camera + pwr button (end)). So i can't flash DREAIMG.nbh. (RC 29) assuming the phone is american.
I do get the default restore menu though. I press alt+L to get the menu. After if i try to flash anything it says that it doesn't pass verification.
So I need to know what file(s) I can flash from the default boot menu that can fix the phone that will pass verification.
Also forgot to mention when i am in the default boot menu and press alt+L, in yellow at the bottom phone displays following error message: "E: Can't open /cache/recovery/command"
Thanks...
Sorta sounds like someone used an app that kills the phone if they lose it or they knew it was bricked and just left it there.
is there any water damage to this phone at all?
why not try posting an ad on craigslist and see if anyone lost it ~.~
All water dmg indicators do not show they were wet at any time. Also how would i make sure i would be returning it back to the correct user? it was found with no SIM, can't even check for addtl' info.
Also if there was ever an app that would brick the phone when someone looses it, thats the first about me hearing it.
Anyone with some actual technical/dev input?
So i found some information at http://android-dls.com/wiki/index.php?title=OTA_Updates#RC28
When I go to install the update, it says thats its opening the package, then verifying the update, finally it trys to install the update and about 70% through it aborts.
Is there any kind of RUU i can use to completely reinstall the software up? If so where could i find it?
Any thoughts?
first of all i would like to thank anyone who tries to help me. i am somewhat new to the motodroid i own an evo and i am trying to help a friend. the phone is a verizon motodroid 1. the phone has been rotted for about a year he was running i think buggless beast at the time it died the initial problem was his baseband along with a few other software info went to unknown status. first he tried a backup, after not fixing the problem he contacted me and i decided to take a look at it after researching on multiple websites the best conclusion i found was to download the drivers for the phone, rsd lite, and the sbf files to reflash the phone back to stock.
i tried all of this with no good results know the phone wont boot past the M logo screen in the boot animation. the phone is unable to restore any backups at this point. every time i run rsd lite it seems to work and at what i believe is the end i get a fail. then when i hold up on the d-pad when turning on the device it reads.
bootloader
2c.7c
code corrupt
and the phone is now unable to charge the battery also the only thing i was successful at accomplishing was flashing the sbr recovery but still could not flash any rom or the update zip that someone had mentioned to flash
any help would be appreciated
ok my best hit at it is resetting the hone. i bought a used droid 1 and the previous owner had left the " connect the dot " lock screen on it so after googling some **** i came accross a site that said something about booting into recovery. hers the steps
slide screen up and press and hold " x " and power until you get a triangle on your screen. now press both, the volume up key and camera simatainiously untill text appears then select reset or factory reset. this worked for me so hope this helps.
that was all done before i tried to use rsd lite and had no results after using rsd lite it completly removes the stock image then rewrites a new one. the problem is the removal of the image passes but writing the image fails so i am left with nothing.
So right now, my phone keeps on getting stuck at the 'android' word bootscreen. It keeps repeating and seems to go on forever! Someone please help me! I heard its due to rooting! Can anyone confirm this?
What did you do? I tried once to install aps 2 card and the phone stood in android screen about 20 min
Anyway if it doesn't start. Flash new android: nand restore or sbf
.
Sent from my Milestone using Tapatalk
Finally somebody replied back. Its been going on for days, I've removed the battery, placed it back, same thing.
Also, sorry but I have no idea how to flash something. How do I do it? And it doesn't even go past it.
I should spend on time in this sub-forum.
If you have flash a custom ROM then just reflash it or try another ROM.
It's highly, highly unlikely that your phone it breaked so don't worry about.
I have never flashed a custom rom. I don't even know how to flash in the first place.
turn off hp.try to hold up-dpad(towards screen) button and switch on your milestone.
then you see black screen written Bootloader.
battery OK.
OK to program
connect USB
data cable.
if you can go into this screen, then u can start to learn to flash vulnerable recovery.
and ready to install custom room.
google around on how to instal vulnerable recovery for milestone .
under18 said:
turn off hp.try to hold up-dpad(towards screen) button and switch on your milestone.
then you see black screen written Bootloader.
battery OK.
OK to program
connect USB
data cable.
if you can go into this screen, then u can start to learn to flash vulnerable recovery.
and ready to install custom room.
google around on how to instal vulnerable recovery for milestone .
Click to expand...
Click to collapse
Yep, I can go into it. But I checked, and can't find how to install a vulnerable recovery. Any help?
My site is down atm, but this may help;
http://forum.xda-developers.com/showthread.php?t=932196
shut down phone ->hold down hard keyboard x key and power button->when M logo appears release power button but keep pressing x key until recovery mode shows up
there is an option for clearing data/factory reset
you'll loose everything but it propably fix the problem
Including my contacts?
ray243 said:
Including my contacts?
Click to expand...
Click to collapse
your contacts if you have chosen it will be at your Gmail account and they will be restored.
Hey everyone - I've got an interesting one I think.
I had just gotten everything working with CM11 when I got ambitious and went to replace the logo.bin to remove the 'unlocked bootloader' warning that shows up every boot. I realized too late that the logo.bin I used was for a Moto G. Now you'd think that this would just affect the boot logo and I'd be able to try again with the right logo.bin... nope.
On boot all I see is colorful snow. I hear the startup sounds, and I can access the files on my computer when connected via USB. After the screen goes to sleep it shows a flashing white light. Same response with each different startup button combo.
Any ideas? I've tried using adb and fastboot manually, as well as Myth Tools. 'fastboot devices' shows up blank, and adb finds no devices either. I've installed RSDLite but can't find a file to use (lots of broken download links), and I'm not sure that would even solve my problem.
Thanks for any help!
The phone woke me up with it's alarm this morning. That was unexpected. It's also ringing when I call it - CM is running, just the screen is messed up.
How can I get into fastboot in this state? I've never had much success getting the key combos to work on this phone. Adb reboot commands were my most reliable way, but adb isn't detecting a device. If I installed CM11 and have not installed google apps yet, should adb be working?
dta5003 said:
The phone woke me up with it's alarm this morning. That was unexpected. It's also ringing when I call it - CM is running, just the screen is messed up.
How can I get into fastboot in this state? I've never had much success getting the key combos to work on this phone. Adb reboot commands were my most reliable way, but adb isn't detecting a device. If I installed CM11 and have not installed google apps yet, should adb be working?
Click to expand...
Click to collapse
Nope. Not until adb is enabled by going into the developer options or tweaking the build.prop before install.
Just hold down all three buttons when you are booting up and you'll access the boot menu, from there you can select recovery or fastboot or whatever (for me it's easier than using the other key combos as I too have a hard time with them).
skeevydude said:
Just hold down all three buttons when you are booting up and you'll access the boot menu
Click to expand...
Click to collapse
Maybe it's the way you described it, but I was actually able to get into the boot menu this time! I've fixed the logo, and the phone boots normally now.
For anyone else with similar issues, getting the boot menu requires doing a simulated battery pull (vol down + power) followed by booting with all 3 buttons pressed. I think my error was attempting to hold all 3 buttons when the phone was still on and expecting to get the boot menu.
Hooray, my wife has a phone again! And I won't have to worry about touching it ever again because I won't be allowed to. :victory:
Thanks!
Hi, I am having some problem with my Atrix HD. I was doing some rom update and after reboot all I can see is colored snow (not sure whats the technical name for this, as it will help to search better) and goes to nowhere from there. I tried rebooting few times, but nothing except the snow. Its summer now, so How can get rid of this snow and see my normal phone ?
manugoenka said:
Hi, I am having some problem with my Atrix HD. I was doing some rom update and after reboot all I can see is colored snow (not sure whats the technical name for this, as it will help to search better) and goes to nowhere from there. I tried rebooting few times, but nothing except the snow. Its summer now, so How can get rid of this snow and see my normal phone ?
Click to expand...
Click to collapse
What exactly were you doing? Taking the new AT&T OTA or was it something on the custom side?
I know that flashing the wrong sized bootlogo can do this. I actually flashed a bad one I made the other day that turns my screen red and the actual image is all jacked up. The Moto G logo I flashed left it snowing just like you're experiencing. I've also had random bad flashes do this too.
All you can do is fastboot/myth/rsd back to stock and start over. Hopefully you have backups.
Thank you, I managed to fix my phone, it was something related to battery. I simple pressed all three buttons and connected to charger to get to fastboot menu, which also rebooted few times as phone did not had enough battery to run fastboot. Repeated the process few time to get it working. Thanks
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
kamikazisolly said:
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
Click to expand...
Click to collapse
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
mrmazak said:
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
Click to expand...
Click to collapse
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
kamikazisolly said:
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
Click to expand...
Click to collapse
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
mrmazak said:
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
Click to expand...
Click to collapse
Sending to blu isnt an option. Out of waranty period, And I also opened it to make sure there was nothing obviously physically wrong.
I also tried using the dirty cow tool, But i cant seem to see the device in ADB. Fast boot however, can see it.
Update over ADB/SD in the stock recovery wouldn't lead me anywhere would they?