I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
kamikazisolly said:
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
Click to expand...
Click to collapse
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
mrmazak said:
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
Click to expand...
Click to collapse
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
kamikazisolly said:
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
Click to expand...
Click to collapse
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
mrmazak said:
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
Click to expand...
Click to collapse
Sending to blu isnt an option. Out of waranty period, And I also opened it to make sure there was nothing obviously physically wrong.
I also tried using the dirty cow tool, But i cant seem to see the device in ADB. Fast boot however, can see it.
Update over ADB/SD in the stock recovery wouldn't lead me anywhere would they?
Related
...Brick an *UNROOTED* G1...?!
I attempted a soft factory reset (which I have done on many occasions previously successfully) but on this occasion I've run into the bootloop. Hitting Camera+Power button results in bootloop also.
One thing to mention is I removed my SD card before running the factory reset?
I've tried leaving the battery out over night and trying again in the morning.
I've tried placing the SD card back in and booting up the phone.
I've tried holding Home+Power to get into recovery but results in bootloop
I've tried holding Camera+Power to get into Bootloader but results in bootloop.
Any suggestions please?
Thanks!
No, this should not happen. With Bootloop do you mean there is just the G1 logo and nothing else, or does it get past the logo and reboots then?
Another thought, has this phone ever been rooted and unrooted again?
If you are still under warranty and the phone is completely stock, I'd return it.
Nope. Phone has never been rooted then unrooted.
By bootloop, I mean, G1 T-Mobile logo shows followed by a picture of a open box with the phone just outside animation and then seconds later the phone reboots itself running into this loop again and again.
Warranty is only for a single year, right? So then that's not an option.
Thanks for suggestions.
Jignesh Sutar said:
Warranty is only for a single year, right? So then that's not an option.
Click to expand...
Click to collapse
Depends on where you are: http://www.htc.com/www/support/warranty.html
It looks like you phone either fails to boot, thus tries to boot recovery (box picture is the background of the recovery) and then reboots (best case, i guess) or the boot to recovery flag is set, recovery fails, reboot (you might seriously be screwed).
You are sure that you can't enter the bootloader? Also try Back+PowerOn. That would make things alot more easy.
How long does it stay with the box picture? Long enough to get adb connected? If yes you could try "adb shell reboot bootloader".
Tried all combinations of buttons to try get into bootloader or recovery, nothing!
Definitely no chance of being able to ADB, the phone switches off very quickly...
Also, have ensured the battery is fully charged, in case that has an impact?
I really looks like you are the first all stock bricked guy I ever heard of.
The boot recovery flag seems to be set for some reason (is this set during a normal hardreset?) as all boottime commands are ignored.
The recovery fails improperly (sounds strange, but if it failed properly, you would end up in bootloader or your system).
-> That really looks like a brick...
Options:
- Warrenty
- JTAG
- perhaps someone else has another idea / sees something I missed...
Good luck with it.
Jignesh Sutar said:
By bootloop, I mean, G1 T-Mobile logo shows followed by a picture of a open box with the phone just outside animation and then seconds later the phone reboots itself running into this loop again and again.
Click to expand...
Click to collapse
What where you flashing? It probably had a radio and something got copied incorrectly into the staging area of ram.. if the radio passes recovery's validation but not the current radios validation you can get stuck.. this shouldn't be possible but I've seen it before.. my bet is a bit error at the wrong point in time.
They say once your device is turning on, its not a hard brick, well explain this. My motorola Nexus 6 won't boot, when I try to power it on, it shows the Google logo then shuts off immediately. When I plug in the charger from a complete power off, the white battery sign keeps flashing, it shows for 1 second then shuts off then repeats the cycle of showing the battery sign then shutting off. It boots into bootloader/fastboot mode fine, and I have tried flashing the factory image, forced flash each partition individually, YES ALL OF THEM, YES I HAVE THE LATEST SDK YES THE LATEST FASTBOOT AND ADB, YES I CHECKED THE MD5 OF THE FILES, YES I USED DIFFERENT CABLES PORTS AND COMPUTERS. it flashes fine in terminal all the files go through with result ''OKAY'' but it still shuts off immediately while showing the first google logo after i reboot. It won't even boot into stock recovery after the flash, it just shuts off after the google logo. i tried with costum revovery same result. i tried 5.0 LRX210 and 5.1 LRX22C. This isn't my first nexus, in know that flashing factory image should fix 99% of issues, ive been flashing phones and rooting for years and i know that nexus devices are somewhat impossible to hardbrick. i made sure to exhaust every option i knew of before posting here, Ive tried the toolkit and its options countless times ive had many sleepless nights now over this. Please help.
P.S I didn't purchase officially from google or Motorola, I bought it for $580 from a guy who claimed he bricked it trying to install a font pack ''iFont'' so I figured let me buy it and restore factory image, easy win. Didn't work. He said he rooted it, installed custom recovery and euphoria os rom. Then he installed the fontpack, it told him to reboot to apply changes, and when he rebooted it wouldn't boot past google screen after that. not even to the boot animation, It just shuts off. When its off and u plug in the charger it does the same thing, you just keep seeing the charging symbol over and over because its constantly rebooting. Its a T-Mobile Nexus 6 BTW, model number XT1103. I am now looking at a motherboard for the nexus 6 on ebay which is $300, as this is the only thing i see left to do. Please any help would be appreciated. I can promise a hefty $$$ reward for any individual that helps me recover it to a working state.
I think they say as long as you can get to the BOOTLOADER it's not a hard brick. But as far as the issue itself, I have no idea. You said you flashed the factory images and it still didn't help?
U manually flashed the images correct? Any errors when flashing? Are you using the flash all bat script or flashing each file separate?
Sent from my Nexus 6 using Tapatalk
Its all BS, there's not really such a thing as a soft. A Brick is a Brick. If your phone is bricked, the only fix is to send it for repair so the manufacturer can fix it. If it can be fixed without doing that, its not a brick.
rootSU said:
Its all BS, there's not really such a thing as a soft. A Brick is a Brick. If your phone is bricked, the only fix is to send it for repair so the manufacturer can fix it. If it can be fixed without doing that, its not a brick.
Click to expand...
Click to collapse
I've heard it called a "sponge" I like that lol
shard111 said:
I think they say as long as you can get to the BOOTLOADER it's not a hard brick. But as far as the issue itself, I have no idea. You said you flashed the factory images and it still didn't help?
Click to expand...
Click to collapse
coldconfession13 said:
U manually flashed the images correct? Any errors when flashing? Are you using the flash all bat script or flashing each file separate?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
rootSU said:
Its all BS, there's not really such a thing as a soft. A Brick is a Brick. If your phone is bricked, the only fix is to send it for repair so the manufacturer can fix it. If it can be fixed without doing that, its not a brick.
Click to expand...
Click to collapse
i flashed each file separately yes no errors when flashing everything went through okay but still wont pass google screen
If it can stay connected while flashing. Does it reboot when connected like charging and stay in bootloop?
Sent from my Nexus 6 using Tapatalk
coldconfession13 said:
If it can stay connected while flashing. Does it reboot when connected like charging and stay in bootloop?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
no.
but after flashing the factory img, you might have to wipe data for it to boot.
jeromechrome1 said:
They say once your device is turning on, its not a hard brick, well explain this. My motorola Nexus 6 won't boot, when I try to power it on, it shows the Google logo then shuts off immediately. When I plug in the charger from a complete power off, the white battery sign keeps flashing, it shows for 1 second then shuts off then repeats the cycle of showing the battery sign then shutting off. It boots into bootloader/fastboot mode fine, and I have tried flashing the factory image, forced flash each partition individually, YES ALL OF THEM, YES I HAVE THE LATEST SDK YES THE LATEST FASTBOOT AND ADB, YES I CHECKED THE MD5 OF THE FILES, YES I USED DIFFERENT CABLES PORTS AND COMPUTERS. it flashes fine in terminal all the files go through with result ''OKAY'' but it still shuts off immediately while showing the first google logo after i reboot. It won't even boot into stock recovery after the flash, it just shuts off after the google logo. i tried with costum revovery same result. i tried 5.0 LRX210 and 5.1 LRX22C. This isn't my first nexus, in know that flashing factory image should fix 99% of issues, ive been flashing phones and rooting for years and i know that nexus devices are somewhat impossible to hardbrick. i made sure to exhaust every option i knew of before posting here, Ive tried the toolkit and its options countless times ive had many sleepless nights now over this. Please help.
Click to expand...
Click to collapse
NONE of this suggests that your phone is a brick. In fact, it all proves that it is NOT a brick.
*which is not to say that it isn't BROKEN.
"i tried with costum revovery same result. i tried 5.0 LRX210 and 5.1 LRX22C"
Let me ask you this; did it reboot when you booted into a custom recovery? If custom recovery worked, then it seems like the unit can still be saved.
BTW: LRX22C is also 5.0. Specifically, 5.0.1. 5.1 is not available yet.
So a little bit of clarifications first;
HAVE you tried to perform a factory wipe (via recovery) or otherwise FORMAT (not "fastboot erase") the data and cache partitions? No part of your message mentions formatting the data or cache partitions. If the init is unable to manipulate/mount a possibly corrupt data or cache partition (or possibly some other partitions as well), then it WILL REBOOT.
In addition, some logs of the reboot could be useful if you are able to obtain any. A somewhat modified boot image can enable adb and kernel logging at a point from before the reboot occurs.
P.S I didn't purchase officially from google or Motorola, I bought it for $580 from a guy who claimed he bricked it trying to install a font pack ''iFont'' so I figured let me buy it and restore factory image, easy win. Didn't work. He said he rooted it, installed custom recovery and euphoria os rom. Then he installed the fontpack, it told him to reboot to apply changes, and when he rebooted it wouldn't boot past google screen after that. not even to the boot animation, It just shuts off. When its off and u plug in the charger it does the same thing, you just keep seeing the charging symbol over and over because its constantly rebooting. Its a T-Mobile Nexus 6 BTW, model number XT1103. I am now looking at a motherboard for the nexus 6 on ebay which is $300, as this is the only thing i see left to do. Please any help would be appreciated. I can promise a hefty $$$ reward for any individual that helps me recover it to a working state.
Click to expand...
Click to collapse
I don't think you need a new mainboard.
If what he explained to you is correct, then my previous about fixing corrupt data partitions should solve the issue for you.
Agree with the guy above me. Same thing happened to me on my Nexus 9. Manual flashes all successful but could not boot. Booted into recovery and did a factory wipe and all was well. I know this is the nexus 6, but it sounds like corrupted data.
I've been using Hazou's ROM for months, worked fine, haven't changed anything. Today I was browsing in Firfox with quite a lot of tabs open. I kept getting odd warnings of apps having low memory. I could do nothing with these popping up every second so I restarted my phone. It was taking forever shutting down so I did power + volume down.
Now it's stuck at the very first screen, the 'warning bootloader unlocked' screen. It just stays like this and occasionally resets and makes the reset buzz and that's it. I can get into fastboot by holding volume down and power and releasing but whenever I try and select an option in fastboot it just resets to the first screen or fastboot again.
I'm mystified because usually people have issues performing the rooting etc but it was a while ago that I successfully rooted the phone and unlocked the bootloader and put on a rom and had been using it. Could my hardware (memory?) have broken rather than software?
Any help would be great, thanks.
Ps. fastboot says:
"Fastboot Reason:
max download size: 100mb."
Possible it's always said that and it means nothing.
Ps. Possibly this thread is of use to me? I'm not sure if it's the same problem. http://forum.xda-developers.com/showthread.php?t=1945176
quixoticduck said:
Ps. Possibly this thread is of use to me? I'm not sure if it's the same problem. http://forum.xda-developers.com/showthread.php?t=1945176
Click to expand...
Click to collapse
What does it say when u try to flash a recovery? a stock system image? wipe data? wipe cache?
If any of those mention an i/o error the phone is beyond repair from the knowledge here or someone can come up with any kind of solution. More phones have this error and it can happen to anyone, it is just rare.
So... I found my old XT890 laying around in my house and i decided to pick it up to see if it works.
I turned it on and immediately appeared an OTA update, so i went there and downloaded it.
When i installed it, the phone restarted and is now looping on the recovery screen (Android system recovery <3e>). I tried factory resetting it, wiping every data to see if it solved anything, but it didn't work.
I can make it to the fastboot menu by using the volume keys, but no option actually seems to work, only "Switch console [NULL: null]" that changes to "Switch console [default: ttyMFD3]". Wondering if that does a thing.
I've tried some solutions from threads here, but none of them seem to work on my phone. RSD Lite looks like it cannot recognize anything, and drivers and "unbrickers" does not work on me too. (Am I doing something wrong?)
Is my phone recoverable? It's the second time I update a phone via OTA and it loops on the recovery menu.
Facing a similar issue, death by OTA update, did you find a solution?
dash-- said:
So... I found my old XT890 laying around in my house and i decided to pick it up to see if it works.
I turned it on and immediately appeared an OTA update, so i went there and downloaded it.
When i installed it, the phone restarted and is now looping.
Click to expand...
Click to collapse
Hello everyone!
I have a Pixel 4XL, bought it when the phone was released. Phone is fully stock, not rooted or flashed with any custom ROM, the bootloader is also not unlocked.
I pulled my phone out of my pocket yesterday and it was on the google logo loading screen that you usually see when you boot up the phone. I assumed that it restarted itself because it was too hot (it felt sort of hot to the touch). But the phone never rebooted itself, it was stuck in the booting screen forever.
I then tried various ways to restart the phone, through recovery mode etc. However, I couldn't get my phone to boot back up. I have yet to try factory resetting the phone as I do have some files in the phone I really would like to keep. Is there any other way to resolve this without a full device data wipe/reset?
Thank a lot in advance!!
andchiang said:
Hello everyone!
I have a Pixel 4XL, bought it when the phone was released. Phone is fully stock, not rooted or flashed with any custom ROM, the bootloader is also not unlocked.
I pulled my phone out of my pocket yesterday and it was on the google logo loading screen that you usually see when you boot up the phone. I assumed that it restarted itself because it was too hot (it felt sort of hot to the touch). But the phone never rebooted itself, it was stuck in the booting screen forever.
I then tried various ways to restart the phone, through recovery mode etc. However, I couldn't get my phone to boot back up. I have yet to try factory resetting the phone as I do have some files in the phone I really would like to keep. Is there any other way to resolve this without a full device data wipe/reset?
Thank a lot in advance!!
Click to expand...
Click to collapse
You can try rescue mode and using the tool Google has online. https://pixelrepair.withgoogle.com/
Depending on the issue and what the tool has to do it may factory reset it.
Thank you! I will give it a shot!
I was hoping that sideloading the May update OTA would revive my phone but it didn't happen so I had to cut my losses and factory reset the phone. I really hope this never happens again...
As my phone was stock and the software never altered, what would cause a bootloop like mine?
andchiang said:
I was hoping that sideloading the May update OTA would revive my phone but it didn't happen so I had to cut my losses and factory reset the phone. I really hope this never happens again...
As my phone was stock and the software never altered, what would cause a bootloop like mine?
Click to expand...
Click to collapse
A friend had the same issue. It appeared that his power button actually got stuck internally so he tried to press it from lets say different angles. It worked, he saved all his data and was fine.