Database Develop

Stuck on bootloader screen.

So I had root access. (i.e. when I first booted my G1 up it said something about a developer phone) and I tried flashing the dreaimg.nbh file to go back down to RC29. It fails every time won't let me do anything else. It just stays srtuck on the bootloader screen when I try to reboot. I've tried about everything I could think of and I'm at wits end. I really hope this problem can be fixed. Does anyone have any suggestions or know what went wrong? Thanks.

Re-download dreaimg.nbh file again. The one you're using may be corrupted.
Why do you want to go RC29 if you have root access? You should be able to flash anything on your phone as is, RC29 is only needed to gain the root.

It won't let me do anything. I'm unable to do anything to the SD card. Although, while typing this I just thought of something. If I got a card reader I could erase the file from my card since I can't do anything to the phone. Maybe that would work. But who knows because I've tried removing the card and booting up and it remains stuck on the bootloader screen. I literally can not do anything else, it's just permanently stuck like that. So I can't mess with anything. And the reason I was trying to downgrade is because I was trying to start all over again but I think I might have ended up screwing myself instead...

I am may be wrong, and please forgive me if I am, but from your post count I am getting the picture that you're pretty new to this.
Tell me if what you did is any different from these steps
You booted phone into h-boot mode holding power and camera buttons
Your phone found dreaimg.nbh and ran it on it's own.
You restarted the phone and got stuck in the boot loop.
Confirm that this is what happened

No, your assumption is not wrong at all. I am pretty new to this.
Yes, I did reboot my phone while holding down the camera button.
It found dreaimg.nbh and ran it but it failed so now I'm stuck in the boot loop with it constantly trying, and failing, to load dreaimg.
Thanks so much for your quick responses.

When it says "failed to load dreaimg.nbh" it means that it does not see it. I have a feeling that a file that you had was zipped.
Let's do this
Boot into recovery by holding power and home buttons
select wipe/factory reset or something along those lines and try booting up a your phone again. I'll be lurking around so just post what you find.
Take a note of which recovery you're running while you're at it too.

No, the file I had was not zipped I don't think cause it sees it and tries to update. It says update in progress then I get the progress bar but when it's finished it tells me: Update Terminate. Update Fail. Then it just goes back to the multi-colored bootloader screen and won't shut off. I can reset it by pressing call+menu+end but then it just starts all over again. So, I can't boot into recovery mode. Matter of fact, the only way to turn the phone off is to remove the battery. Otherwise, it just starts in bootloader mode and continues this viscous cycle.
At this point I don't even care about installing a ROM or anything, I just want a working phone.

I see. Yep.. you're S.O.L.
Just to make sure... when your phone is off and you hold power and home buttons it just goes to h-boot screen, right if so then unfortunately there's only one thing to do: get a card reader, re-download .nbh file and start over. At this point you have no working recovery or rom on your phone. Once you get that going you should be on your way to secure a root and flash whatever rom you need to.

Is it even fat32?

Damn. That's what I thought. I should have just left well enough alone until I did more research and knew exactly what I was doing but I get ADD when I'm hungover. Oh well. Thanks for your help.

This will happen from time to time.. it's always desirable to have a card reader handy. Also.. since you have nothing to loose, this would be a great time to re-format and re-partition your sdcard so you can start squiky clean.
Good luck.... let us know when this is worked out by adding [SOLVED] to the title of this thread.

[Q] Urgent: Nexus failing to boot

Hi all,
I have had my N1 for 1year and two weeks now (yes, warranty just expired). I was charging the device and it seemed to overheat and reboot. I unplugged it, took the battery out, let it rest for a bit and tried to boot it again. The phone now gets stuck on the X logo (not moving) and never boots.
I'm currently abroad (in the UK) and can't have it sent back for repair (I'd have to pay the repair too).
Will rooting the phone and installing an alternate OS fix my phone?
Is there any way to get HTC to honor the warranty after two weeks of expiration (I've been getting this problem for a while now, but that was only an issue if I made extensive use of the device while charging, which I almost never do so I didn't bother.)
Is there any way to fix this issue without messing with rooting? I'm abroad right now and all I want is my phone to work.
Any suggestions are welcome.

Try booting into bootloader from power off (vol- pwr) if that doesn't work then try the 3 figure salute (pwr vol- tb) your phone should boot into fastboot then just select bootloader.
If either of these work the your good you can get the static x fixed all you need to do is passimg (search wiki if you don't know what it is) as for the charging problem passimg will factory reset the phone so if that doesn't fix it then no you'll need to try rooting or it might be hardware.

Yes, I'm able to go into the bootloader.
I tried clearing the storage, choosing fastboot, etc. The phone seems to be working, just won't boot past the static X.
From your last reply, you're saying passimg has good chances to fix my phone. What does that involve? Do you have a link to a how-to that I could follow (it would really be a bad time for me to brick my phone, a good how-to would be really appreciated).
Cheers!

Yes passimg is used for many things it just reflashes a shipment ROM to the phone through bootloader. Like I said you can visit the wiki to have a how to here is a link http://forum.xda-developers.com/wiki/index.php?title=Nexus_One/Guides_%26_Tutorials scroll down to "Unroot / Restore your Nexus" then follow the instructions. This should restore you to frg33 then you just need to update back to 2.3.4.
NOTE: this will wipe your data.

Ahh there's a way to unroot the nexus one now!
I had no idea! This is good to know (last time I checked was in December I think).
I will give that passimg a try as soon as I get home.
Can anyone confirm that this ("Attention: Latest stock ROMs don't flash using PASSIMG.ZIP method. Use the provided latest Froyo PASSIMG, and upgrade it after flashing.") means I can still reflash using this if I have the latest ROM (2.3.4) but will simply have to update again after (which I might not do given the issues I'm facing).
Cheers!

Confirmed - Dude is giving you good info... xD

Just to verify, unrooting is not the same as relocking. If you unlocked your bootloader (have a little lock symbol under the X screen), there is no way to relock it.
But the passimg is a good option. It will take you back to an older version of Android, and then you just let the system update itself.
Since you are out of your warranty, I can highly suggest looking into custom firmwares. These give you a lot more features and in many cases, perform better. CyanogenMod is probably the most popular one. These will fully replace your Android OS. CyanogenMod really doesn't even differ in look from stock all that much. Most people probably wouldn't even have a clue they are running something different, except for the stability and performance increases.
You can read up about this stuff in the wiki as well.

Oh, I see, thanks for the info.
I'm actually trying to get the FRG83 passimg file but the link is dead. Does anyone have an alternate one?

Use the FRG33 image

Alright,
I unlocked the device, used fastboot to write the recovery "Amon_Ra's Recovery".
Then I rebooted, went to the bootloader (trackball + power), went to "recovery" but the phone still gets stucked on the X (with the unlocked padlock logo).
Any advices?

Try the passimg, but it's possible that you are looking at hardware failure...

ldiamond2 said:
Alright,
I unlocked the device, used fastboot to write the recovery "Amon_Ra's Recovery".
Then I rebooted, went to the bootloader (trackball + power), went to "recovery" but the phone still gets stucked on the X (with the unlocked padlock logo).
Any advices?
Click to expand...
Click to collapse
If you are still running stock Android, you can't reboot between installing the recovery and getting into it. Stock Android will replace it. Try to go back to the bootloader and select recovery then, or fastboot to load the recovery, and then use fastboot to boot off of it.
Code:
fastboot flash recovery "c:\location to\recovery.img"
fastboot boot recovery "c:\location to\recovery.img"
Hopefully this will get you into Amon_RA so you can try again.
But the passimg method is used in the bootloader, not in recovery. You don't need a custom recovery to use the passimg method.

Amazing, thanks for pointing out my mistake, that give me a little bit of hope now . (I was at the point where I'd open the thing and look for a broken solder joint.)
I will try this as soon as I get home!
**Edit** I actually am not sure if I really rebooted or went straight to recovery. I'll update this thread tonight.

According to some other people, this would be a common issue with the internal memory dieing.
Is there a utility I can use to check the state of the memory?

None that I know of. Our phone internal memory uses the yaffs2 (Yet Another Flash File System v2) file system. I haven't heard of any programs that can check it.

Same situation
Hello, all. I haven't signed in on here in ages just because I've been so happy with how my Nexus has been running.
I ran into the same problem as OP stated.
I think I have some sort of hardware issue because my phone used to randomly freeze and couldn't be restarted unless I pulled the battery. Now it's at the point where I can't even turn it on because nothing happens when I press the power button or if I try to boot into recovery. This is really frustrating.
Is there any way to check for hardware damage? My warranty is over as well so I'd have to pay for any repairs to my phone if I sent it in.

If it's running, you can try to pull a log, and see what error reports you get?

andythefan said:
Now it's at the point where I can't even turn it on because nothing happens when I press the power button or if I try to boot into recovery. This is really frustrating.
Click to expand...
Click to collapse
Your power button might just be dead. Try having the phone plugged into a power source and removing and reinserting the battery. While you are doing that, hold the Volume Down button. This will get you into the bootloader which would allow a passimg to be performed. Hopefully your reboots aren't a hardware problem.

So , after pulling my battery, pulling the sim and the sd card, it finally turned on and went to recovery without freezing. I was able to wipe and reflash cyan 7. It's working well for now, but I'm really afraid this is going to happen again because this isn't the first time that it's just froze repeatedly.
Does anyone know what the problem could be?

Alright,
I did "fastboot flash recovery MYIMG" then "fastboot boot MYIMG", didn't work.
Then I tried "fastboot flash recovery MYIMG" then go to bootloader (without rebooting) and selected recovery.
Still no luck.
It always freezes on the static X logo. What else can I do? Will using passimg be any different (I don't have any way to put the file on the micro SD card but I can manage to do it if it's worth the shot).
Thanks

Captivate gets stuck with black screen after booting. No response to anything

Phone: Samsung Captivate I-896, with AT&T stock Android 2.2 flashed to it. Rooted and unlocked.
Action: Deleted some *.odex files from Root/Data/App, following a guide to get around the "out of space" message while trying to install software. Cleared Delviks cache directory.
Problem: First restart after above actions(which didn't resolve the out of space message issue), phone shows start-up animations, gets stuck with black screen. Left like this overnight, nothing happens. Vibrates every 50 seconds or so. Respons to hardware Vol+ press with the home/back/menu backlight. Otherwise, no response to anything, black screen(backlight on). Does not receive phone calls. I do not know for sure if the action listed above is the one that caused this situation, but I assume so since it was the last action taken before the issue appeared.
Solutions attempted: Tried every possible permutation/combination of buttons/usb cable/etc/ restarts etc. listed here: http://forum.xda-developers.com/showthread.php?t=858765&page=1, except Jig. The phone would not go into recovery or DL mode.
Question.
Am I correct in assuming that forcing the phone into recovery mode and reflashing a new system(or reflashing the old one) is the only way to get the phone to work again?
There is no way to "soft-reset" the phone, with all settings reverted back to stock, if it does not boot up completely?

Titerepayaso said:
Phone: Samsung Captivate I-896, with AT&T stock Android 2.2 flashed to it. Rooted and unlocked.
Action: Deleted some *.odex files from Root/Data/App, following a guide to get around the "out of space" message while trying to install software. Cleared Delviks cache directory.
Problem: First restart after above actions(which didn't resolve the out of space message issue), phone shows start-up animations, gets stuck with black screen. Left like this overnight, nothing happens. Vibrates every 50 seconds or so. Respons to hardware Vol+ press with the home/back/menu backlight. Otherwise, no response to anything, black screen(backlight on). Does not receive phone calls. I do not know for sure if the action listed above is the one that caused this situation, but I assume so since it was the last action taken before the issue appeared.
Solutions attempted: Tried every possible permutation/combination of buttons/usb cable/etc/ restarts etc. listed here: http://forum.xda-developers.com/showthread.php?t=858765&page=1, except Jig. The phone would not go into recovery or DL mode.
Question.
Am I correct in assuming that forcing the phone into recovery mode and reflashing a new system(or reflashing the old one) is the only way to get the phone to work again?
There is no way to "soft-reset" the phone, with all settings reverted back to stock, if it does not boot up completely?
Click to expand...
Click to collapse
Sounds pretty accurate. You'll have to get a jig to get in download mode, flash stock Odin KK4 to fix w/e happened during your testing.

Thanks Bwolf. I just tried ADB console on a different computer and it connects to the device just fine in spite of black screen. I guess I had one thing right, USB DEBUGGING enabled before this whole deal.
Question: is there any way I can restore the phone using the console without wiping everything?

Titerepayaso said:
Thanks Bwolf. I just tried ADB console on a different computer and it connects to the device just fine in spite of black screen. I guess I had one thing right, USB DEBUGGING enabled before this whole deal.
Question: is there any way I can restore the phone using the console without wiping everything?
Click to expand...
Click to collapse
Make a backup with ADB.
Once that's done, push download mode with it and get Odin KK4 (without bootloaders). You'll have to start from there to fix w/e went wrong.
You don't have to wipe your sd doing so but you will lose your apps and such. If you backed up your phone with your Play Store account, it will re-download your apps as you're done booting up.
To get back up where you were, grab Corn Kernel, flash it with Odin 1.87 and then follow the full instructions of the ROM you wanna use.

[Q] Stuck in a reboot loop, can't get into recovery, what to do?

I recently upgraded to an HTC One, on Verizon in the US. I promptly used rumrunner s-off to get S-OFF, unlock the bootloader, and obtain root. I also flashed the latest ClockworkMod recovery, with the intent of installing CyanogenMod, but decided I'd try out the stock ROM for a few days first, since my old phone was still on Gingerbread.
Everything was working fine until I decided to remove some Verizon bloatware. While I did back up each app before removing it, I forgot to make a nandroid backup. I only removed things that seemed nonessential -- such as the NFL Mobile app, Slacker radio, and My Verizon, which I'd also removed without issue on my old phone -- but apparently that was not the case, as after rebooting, I got stuck on the Verizon logo during the boot sequence.
I then attempted to perform a factory reset in CWMR, and it appeared to be stuck on "wiping cache", so -- like the impatient idiot I clearly am, as I later found a few threads explaining that this part of the reset process can just take a very long time -- I rebooted the phone to try again. This resulted in CWMR throwing errors about failing to mount several partitions, but it finally seemed to finish the reset on the second try. However, upon reboot, it just sat at the HTC logo forever.
After about an hour, and no success in finding anything on the internet indicating that it should take this long to boot up after a reset, I powered the phone off and back on again. After rebooting, the bootloader screen displayed "OS" in red followed by some random symbols. I could still get into recovery, and could still access the device with fastboot, so I decided to try to reflash the stock ROM, using the RUU zip found here.
Due to some problem (this was all about 6 hours ago while I was at work, and I was quite frustrated at this point, so I don't remember what exactly was the problem here) and based on the advice of another forum thread, I decided to try TWRP instead of CWM. But, TWRP wouldn't go any further than its logo splash screen, so I re-flashed CWM. Afterwards, my phone went into a reboot loop -- the HTC logo comes up, the phone vibrates shortly, and then after a few seconds the screen turns off and it does the same thing over again. If I hold the power button down for long enough, it will power down, but if I try to turn it back on, it will either go into the loop again, or just sit at the HTC logo (left it there for upwards of an hour at one point).
I have found several threads about similar boot loop issues, but as I can't get into hboot/fastboot or recovery, I can't try to apply any of the solutions. I cannot connect from my computer with fastboot or adb -- "devices" lists nothing, and all other commands return either "error: no device found" or "waiting for device". No amount of power+volume down makes any difference, nor does holding the phone under a bright light as several threads suggested. Occasionally it will go to a black screen (not off, just black) that maybe it thinks is the bootloader menu, but it doesn't display anything, and after about 30 seconds it will reboot itself.
Does anyone have any suggestions for getting into recovery and trying to reflash.... something?
Alternatively, if I return it to Verizon at this point, will they be able to tell that it's rooted/unlocked/S-OFF?
Any ideas would be much appreciated!

brasstongue said:
I recently upgraded to an HTC One, on Verizon in the US. I promptly used rumrunner s-off to get S-OFF, unlock the bootloader, and obtain root. I also flashed the latest ClockworkMod recovery, with the intent of installing CyanogenMod, but decided I'd try out the stock ROM for a few days first, since my old phone was still on Gingerbread.
Everything was working fine until I decided to remove some Verizon bloatware. While I did back up each app before removing it, I forgot to make a nandroid backup. I only removed things that seemed nonessential -- such as the NFL Mobile app, Slacker radio, and My Verizon, which I'd also removed without issue on my old phone -- but apparently that was not the case, as after rebooting, I got stuck on the Verizon logo during the boot sequence.
I then attempted to perform a factory reset in CWMR, and it appeared to be stuck on "wiping cache", so -- like the impatient idiot I clearly am, as I later found a few threads explaining that this part of the reset process can just take a very long time -- I rebooted the phone to try again. This resulted in CWMR throwing errors about failing to mount several partitions, but it finally seemed to finish the reset on the second try. However, upon reboot, it just sat at the HTC logo forever.
After about an hour, and no success in finding anything on the internet indicating that it should take this long to boot up after a reset, I powered the phone off and back on again. After rebooting, the bootloader screen displayed "OS" in red followed by some random symbols. I could still get into recovery, and could still access the device with fastboot, so I decided to try to reflash the stock ROM, using the RUU zip found here.
Due to some problem (this was all about 6 hours ago while I was at work, and I was quite frustrated at this point, so I don't remember what exactly was the problem here) and based on the advice of another forum thread, I decided to try TWRP instead of CWM. But, TWRP wouldn't go any further than its logo splash screen, so I re-flashed CWM. Afterwards, my phone went into a reboot loop -- the HTC logo comes up, the phone vibrates shortly, and then after a few seconds the screen turns off and it does the same thing over again. If I hold the power button down for long enough, it will power down, but if I try to turn it back on, it will either go into the loop again, or just sit at the HTC logo (left it there for upwards of an hour at one point).
I have found several threads about similar boot loop issues, but as I can't get into hboot/fastboot or recovery, I can't try to apply any of the solutions. I cannot connect from my computer with fastboot or adb -- "devices" lists nothing, and all other commands return either "error: no device found" or "waiting for device". No amount of power+volume down makes any difference, nor does holding the phone under a bright light as several threads suggested. Occasionally it will go to a black screen (not off, just black) that maybe it thinks is the bootloader menu, but it doesn't display anything, and after about 30 seconds it will reboot itself.
Does anyone have any suggestions for getting into recovery and trying to reflash.... something?
Alternatively, if I return it to Verizon at this point, will they be able to tell that it's rooted/unlocked/S-OFF?
Any ideas would be much appreciated!
Click to expand...
Click to collapse
Can u get into bootloader?? Press power + vol down??

brasstongue said:
After rebooting, the bootloader screen displayed "OS" in red followed by some random symbols.
Click to expand...
Click to collapse
that means your firmware is either in a state of limbo, or you corrupted one of your partitions.
so I decided to try to reflash the stock ROM, using the RUU zip found here. Due to some problem
Click to expand...
Click to collapse
which ruu, and what was the problem
But, TWRP wouldn't go any further than its logo splash screen, so I re-flashed CWM.
Click to expand...
Click to collapse
Did you flash the correct recovery for Verizon (M7_WLS), it's different than international (M7_U/UL)
as @khandelwalsiddharth mentioned you need to get to bootloader if a fix is even possible, so POWER OFF your phone completely, then HOLD VOLDOWN and POWER, when it boots up let go of POWER but keep holding VOLDOWN until you get to bootloader
then you need to have working "fastboot devices" (if you're on Win8.1, you probably need to use another computer with Win7 or use a Linux Live USB)
if you can't get to bootloader, then I don't think this is fixable, cause hboot is corrupt

Thanks for the reply.
nkk71 said:
which ruu, and what was the problem
Click to expand...
Click to collapse
Oh, I guess I forgot to make that a link... I had downloaded the only VZW one on this page but I'm not even sure why I bothered to mention it, as downloading it to my computer was the only thing I ever did with it; I was never able to get as far as flashing it to the phone, so it actually had nothing to do with the problem...
nkk71 said:
Did you flash the correct recovery for Verizon (M7_WLS), it's different than international (M7_U/UL)
Click to expand...
Click to collapse
I was under the impression that Verizon was m7vzw, in which case yes, I was using the correct recovery (6.0.4.7 version listed next to "HTC One (Verizon)" on this page) and it was working just fine the first time I flashed it.
nkk71 said:
as @khandelwalsiddharth mentioned you need to get to bootloader if a fix is even possible, so POWER OFF your phone completely, then HOLD VOLDOWN and POWER, when it boots up let go of POWER but keep holding VOLDOWN until you get to bootloader
Click to expand...
Click to collapse
Yeah, I've tried this about 100 times, and the only thing holding VOLDOWN does is occasionally interrupt the boot loop to send me to the black screen for 30 seconds before going back into the boot loop. I did find one thread where the poster was able to get into the bootloader after letting the phone sit overnight, so I'll try again tomorrow, but I'm not very hopeful.
nkk71 said:
then you need to have working "fastboot devices" (if you're on Win8.1, you probably need to use another computer with Win7 or use a Linux Live USB)
Click to expand...
Click to collapse
I'm on Win7, and "fastboot devices" was working the other day, so I know my drivers are all set up properly and functioning. The phone just isn't booting far enough to connect to the computer.
nkk71 said:
if you can't get to bootloader, then I don't think this is fixable, cause hboot is corrupt
Click to expand...
Click to collapse
So... should be safe to take it back to Verizon and ask for a replacement, since they won't be able to tell it's unlocked? >_>

brasstongue said:
Thanks for the reply.
Oh, I guess I forgot to make that a link... I had downloaded the only VZW one on this page but I'm not even sure why I bothered to mention it, as downloading it to my computer was the only thing I ever did with it; I was never able to get as far as flashing it to the phone, so it actually had nothing to do with the problem...
I was under the impression that Verizon was m7vzw, in which case yes, I was using the correct recovery (6.0.4.7 version listed next to "HTC One (Verizon)" on this page) and it was working just fine the first time I flashed it.
Yeah, I've tried this about 100 times, and the only thing holding VOLDOWN does is occasionally interrupt the boot loop to send me to the black screen for 30 seconds before going back into the boot loop. I did find one thread where the poster was able to get into the bootloader after letting the phone sit overnight, so I'll try again tomorrow, but I'm not very hopeful.
I'm on Win7, and "fastboot devices" was working the other day, so I know my drivers are all set up properly and functioning. The phone just isn't booting far enough to connect to the computer.
So... should be safe to take it back to Verizon and ask for a replacement, since they won't be able to tell it's unlocked? >_>
Click to expand...
Click to collapse
my bad, thought I read Sprint, not sure if Sprint and Verizon use same recovery, but that doesn't really matter now
unless you can get to bootloader, you're stuck, sorry.
If your pc does see "fastboot devices" then it must be in bootloader and flashing a ruu.zip (if available) could (that's a very big could) get the device working again.

Blu R1 HD Soft Brick

I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?

kamikazisolly said:
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
Click to expand...
Click to collapse
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.

mrmazak said:
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
Click to expand...
Click to collapse
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.

kamikazisolly said:
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
Click to expand...
Click to collapse
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.

mrmazak said:
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
Click to expand...
Click to collapse
Sending to blu isnt an option. Out of waranty period, And I also opened it to make sure there was nothing obviously physically wrong.
I also tried using the dirty cow tool, But i cant seem to see the device in ADB. Fast boot however, can see it.
Update over ADB/SD in the stock recovery wouldn't lead me anywhere would they?