Database Develop

Phone suddenly acting up need some help

I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.

whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery

Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....

send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too

The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....

whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.

Boot Loop

I have had my HTC One M7 shortly after it was release. I got it from ATT. I immediately found a guide here and rooted it. I had TWRP and every time ATT tried to push an OTA I would refuse. I haven't bothered with it until a couple weeks ago when I wanted to put in KIT KAT. so I found m7_Stock_Rooted_4.18.502.7_odex.zip. I did a dirty upgrade, as the thread said it was okay. And it was. I am going on a trip so I purchased a sim unlock code in between upgrading to kitkat and today.
I got another OTA. I must not have read the bootloader correctly to refuse the install. I was no longer rooted. I come back to XDA and thought what the heck, I'll try out this ROM, it looks nice: Android_Revolution_HD-One_83.1.zip. I use TWRP to put the ROM in and now I am full of fail. After a little bit of Google I decided to try to do a factory reset. And now I am stuck in a boot loop. I have went back to Google but so far all I have seen is use adb or some other method to put things on the "sd card". But how would I do that when this phone doesn't have a sim card and I can't hook it up to my computer anymore? FWIW at some point in the boot loop my computer will recognize the phone, but it won't stay in that state long before it goes away. What happens is my phone starts too boot. Boot screen comes up. After about 10-15 seconds it restarts. This time saying entering recovery.... at the top. That lasts for about 2 seconds, phone goes black and reboots like normal. Over and over.
Best I can do is get to the android hard reset screen by holding power and reset screen. But that is saying "tampered" and "unlocked" at top. I chose the factory setting option and that doesn't do anything to alter the current state.
Edit:
When I went to flash Android Revolution ROM I chose wipe data. It gave some error that some files were not copied. So I ran it again, straight from TWRP. But that never installed right and I was stuck in a boot loop. I don't have many options with the android hard reset menu. But if choose restore, I will get to see the screen from TWRP flash for just a moment before it goes away and reboots.
Also I do see my phone when I have it plugged in the control panel (windows). Under devices and printers, it is listed as Android 1.0 under unspecified devices.

Budee80 said:
I have had my HTC One M7 shortly after it was release. I got it from ATT. I immediately found a guide here and rooted it. I had TWRP and every time ATT tried to push an OTA I would refuse. I haven't bothered with it until a couple weeks ago when I wanted to put in KIT KAT. so I found m7_Stock_Rooted_4.18.502.7_odex.zip. I did a dirty upgrade, as the thread said it was okay. And it was. I am going on a trip so I purchased a sim unlock code in between upgrading to kitkat and today.
I got another OTA. I must not have read the bootloader correctly to refuse the install. I was no longer rooted. I come back to XDA and thought what the heck, I'll try out this ROM, it looks nice: Android_Revolution_HD-One_83.1.zip. I use TWRP to put the ROM in and now I am full of fail. After a little bit of Google I decided to try to do a factory reset. And now I am stuck in a boot loop. I have went back to Google but so far all I have seen is use adb or some other method to put things on the "sd card". But how would I do that when this phone doesn't have a sim card and I can't hook it up to my computer anymore? FWIW at some point in the boot loop my computer will recognize the phone, but it won't stay in that state long before it goes away. What happens is my phone starts too boot. Boot screen comes up. After about 10-15 seconds it restarts. This time saying entering recovery.... at the top. That lasts for about 2 seconds, phone goes black and reboots like normal. Over and over.
Best I can do is get to the android hard reset screen by holding power and reset screen. But that is saying "tampered" and "unlocked" at top. I chose the factory setting option and that doesn't do anything to alter the current state.
Edit:
When I went to flash Android Revolution ROM I chose wipe data. It gave some error that some files were not copied. So I ran it again, straight from TWRP. But that never installed right and I was stuck in a boot loop. I don't have many options with the android hard reset menu. But if choose restore, I will get to see the screen from TWRP flash for just a moment before it goes away and reboots.
Also I do see my phone when I have it plugged in the control panel (windows). Under devices and printers, it is listed as Android 1.0 under unspecified devices.
Click to expand...
Click to collapse
which twrp version do you have installed?

little123 said:
which twrp version do you have installed?
Click to expand...
Click to collapse
Thanks dude. I had an older version, since I originally rooted this phone around 18 months ago and used a version from back then. I watched a youtube video how to push TWRP onto a soft bricked device using ADB. After that, I was able to install the ROM.

Budee80 said:
Thanks dude. I had an older version, since I originally rooted this phone around 18 months ago and used a version from back then. I watched a youtube video how to push TWRP onto a soft bricked device using ADB. After that, I was able to install the ROM.
Click to expand...
Click to collapse
glad i could help with just a question

Soft Brick

Hello,
Today, while I was using my phone, it restarted itself and has been stuck at a boot loop almost entirely since then. It has successfully booted up 2-3 times but will usually restart itself within 30-45 seconds of booting and then will be stuck in a boot loop again. When it has started up its usually after it has been bootlooping for a while. I'm rooted and using xTreme Rom v2.0. I have had occasional random reboots here and there before but the phone always booted right up again without any issues. I haven't done anything with root/recovery since early September.
I've tried doing a factory hard reset without any luck. My phone booted up after I tried the hard reset and it was like the reset didn't happen. I can't boot into TWRP. I can boot into download mode and I tried to reset using kdz. It got to 100% but the the phone restarts and is back in the boot loop (then the lg flash tool gets an error and force quits). I've tried removing my sd and sim cards, I've tried swapping to a different battery, I've tried leaving the battyer out and letting the phone cool down. Nothing is working. I have noticed that when the phone is going to boot up correctly the full LG animation plays. When the phone is going to boot loop I only get a static LG Powered by android image.
Any suggestions?

Since I tried to rest using kdz I can't get past the boot loop...Device also isn't recognized when using adb
edit: It booted up once this morning and went to the initial set up screen, like the kdz worked. But about 30 seconds-a minute later the phone locked up, rebooted and has been stuck in a boot loop since.

That's weird..
So the KDZ goes through all the way successfully.
Phone does the update all apps etc.. and it still boot loops after a while?
Which ROM version are you updating it back to?

My phone just did the exact same thing. I'm also on the Extreme Rom. Everything you described is my experience too. When I use the LG tool it goes all the way through and reboots the phone but just keeps bootlooping. Did you find a fix? I've tried everything i can think of. Probably going to take it in tomorrow and get warranty on it.

rectifiercc said:
My phone just did the exact same thing. I'm also on the Extreme Rom. Everything you described is my experience too. When I use the LG tool it goes all the way through and reboots the phone but just keeps bootlooping. Did you find a fix? I've tried everything i can think of. Probably going to take it in tomorrow and get warranty on it.
Click to expand...
Click to collapse
I used the following method:
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Download the correct KDZ file to flash back to and follow the rest of the instructions. You can also look at this video tutorial. https://www.youtube.com/watch?v=zXO2SHqBiNk
The one you'll want to try is "Normal Flash"
"CSE Flash" is a full wipe that deletes all data.
Mine was weird where it told me my phone disconnected, but the progress bar was still continuing. If that happens to you, don't hit cancel, let the progress bar finish to 100%

Note 5 stuck in loop while updating firmware at %24

Hi All,
Sorry if this is asked before. I have a new Note 5 unlocked. I turned it on yesterday and started using it. Late at night, its screen froze. I tried pressing Power+Volume_Down buttons to restart the phone. The phone restarted but the the screen was black. Only the notification light was on (blue).
In the morning, the light was still on and the phone was froze. I tried restarting it and I succeeded it. Then I realized the phone was very, I mean veeeery slow. By the time, a firmware update notification popped up. I believe it was Marsmallow update. I hit the yes button. The phone started the update and was stuck at %24. Then it restarted itself. The update process starts over and when it reaches %24, it starts over.
This happened before with my note 4 when I tried to root it. This phone is brand new and is not rooted. However, I transferred my Google profile but I did not select to download my previous apps. So, I don't think it is rooting issue but stucking at the same percentage makes me nervous.
I tried to get into recovery mode but the button combination does not work at all. So I can neither factory reset nor clear the cahe partition. When I press Volume_Down+Home+Power buttons, a custom rom download screen appears but Volume_Up+Home+Power buttons do not work at all. I cannot shut off the phone. It constantly restarts itself, starts the update, fails at %24 and starts the process over again.
What might be the problem? How can I fix this?
Regards

Hi,
Try flashing some stockfirmware via Odin (ideally something of the same android version i.e. lollipop/marshmallow). Once it's installed you should be able to access recovery from which I strongly recommend clearing your cache afterwards as you've already suggested. If you are not worried about loosing any data, then flash new firmware that is inclusive of BL/CP/CSC files too (each one has a category for such in Odin). With the latter, by all means flash marshmallow etc. :good:
Regards

Blu R1 HD Soft Brick

I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?

kamikazisolly said:
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
Click to expand...
Click to collapse
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.

mrmazak said:
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
Click to expand...
Click to collapse
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.

kamikazisolly said:
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
Click to expand...
Click to collapse
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.

mrmazak said:
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
Click to expand...
Click to collapse
Sending to blu isnt an option. Out of waranty period, And I also opened it to make sure there was nothing obviously physically wrong.
I also tried using the dirty cow tool, But i cant seem to see the device in ADB. Fast boot however, can see it.
Update over ADB/SD in the stock recovery wouldn't lead me anywhere would they?