Database Develop

Phone suddenly acting up need some help

I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.

whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery

Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....

send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too

The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....

whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.

[Q] Stuck on boot animation after flashing Stock ROM

Alright, here's the story. I needed to unlock my phone, so I looked up a few guides. I found one that I like and was checking to see if the ROM I had installed would allow me to enter in my unlock code after I got it, unfortunately it wouldn't. So I decided to flash the stock ROM for my phone. Odin did it's job, and everything seemed to go alright, but after Odin finished up, the phone still remained in the boot screen. I let it sit for a while, and it continued on for about half an hour. I restarted it, went to go do some things. I came back hoping that my problem would be solved, but nope, still a looping boot animation. Has anyone else had this problem, or have some idea on how I might work around this?
TLR; Phone is stuck on boot animation after flashing Stock ROM.

skribel said:
Alright, here's the story. I needed to unlock my phone, so I looked up a few guides. I found one that I like and was checking to see if the ROM I had installed would allow me to enter in my unlock code after I got it, unfortunately it wouldn't. So I decided to flash the stock ROM for my phone. Odin did it's job, and everything seemed to go alright, but after Odin finished up, the phone still remained in the boot screen. I let it sit for a while, and it continued on for about half an hour. I restarted it, went to go do some things. I came back hoping that my problem would be solved, but nope, still a looping boot animation. Has anyone else had this problem, or have some idea on how I might work around this?
TLR; Phone is stuck on boot animation after flashing Stock ROM.
Click to expand...
Click to collapse
Enter recovery and wipe data
Sent from my Sony Tablet S using xda app-developers app

[B]thats the hardest brick man[/B]
happened to me while doing something stupid to my kernel... believe me it is impossible to fix.
i took it to my ISP they said its liquid damage but it wasnt i knew... they said BER(beyond economic repair)
so i took it to samsung and collected it after 10-15 days. from the looks of things they changed my motherboard.
you can return it even if warranty is void(they cannot tell if its void or not)
mine only blinked when i tried recovery,download or charge and showed logo when i turn on only.

Hi There,
You will need to enter the Recovery Mode and Have a Factory Reset and Wipe Dalvik cache. If the device doesnt enter recovery you can force it to do so using JIGG or Heidmall. After wiping if still no progress. You should check whether you have flashed the correct stock rom according to your Country.

[Q] Boot lopp w/ AP, Plz help.

Droid 4 running Stock Jb 4.1.2, Safestrap 3.11, Liquid smooth 2.9, CM (last stable)
Everything working fine for a number of months, installed Liquid smooth via -> delete romslot 3, create romslot 3, install Liquid 2.8.
It ran for a number of days no problems. Restarted fine, all features worked great, even the annoying random restart from 2.4 went away.
6 - 10 days in, im surfin' the news sites at work, put it down, screen goes black, i pick it up. Hit the power button cause i realize its off and it just boot loops... so bad i had to vol-/+ pwr, go to flash mode and THEN turn it off b/c it just kept trying to restart, hang on logo.
I got home and decided to AP flash the latest:
9.8.2O-72_VZW-18-2
Blur_Version.98.72.182.XT894.Verizon.en.US for the maserati.
Boot looped a few times, i was able to get it to go into recovery mode, after that it loaded up the stock JB system. First boot it crashed and restarted, second boot it loaded but only the keyboard worked, not the touch screen. Went to the in OS option of factory reset mode + delete storage.
Rebooted, worked. Checked it a few boots, everything is fine. I use Druid 4 Utility Xt894 JB version and apply the root. Works great. Install safestrap, Create new partition, install liquid smooth 2.9. Works for an afternoon... at work today the touch screen stops responding, i restart it a few times. I try to enter recovery mode. Now im in boot loop again...
I've tried re flashing it again, a few times. I tried even going down to the previous release of JB for the phone. STILL 4.1.2!!!! But nothing.... it just boot loops... what did i do wrong? It was running great. No tweaks or anything done to it prior to it having its melt down.
Help please.. ive provided as much information as possible and though i only joined XDA now to post for help, i have read it for a long time as my main source for my phone and have donated to both CM and Liquidsmooth teams previously..
help!!!

I can't see where you are doing anything wrong. You have obviously done your research and have a good idea of what you are doing. I see, after you fastbooted, you went back to Liquid. I think I would try running CM10.1 or even stock for a few days and see if you have the issue there as well. If you do than it sounds to me like it might be a hardware issue. If not, maybe try re-downloading Liquid. Perhaps your zip got corrupted somehow.

I would love too. In fact i would be willing to run it on the stock crappy 4.1.2 if i could get it out of boot loop this time...
It just keeps boot looping on the logo. AP Fashboot flash and BP flash work but recovery and normal boot/reboot mode just goes into M logo boot loop.
I've re downloaded the 4.1.2 jb SBFs from 2 different sources to ensure its not a corrupt file, tried 18_1 and 18_2 software versions...
Is there a way to use the abd shell to get into the filesystem and check whats going on? Is the SBF the last call? or is there another route to see whats going on or just flash EVERYTHING? Like completely back to stock?
I can find my way around a PC file system but im not familiar with linux. Please help me understand, Is it like having CMOS and BIOS settings or equivalent to damaged CMOS firmware? What am i not replacing/reverting by SBF and HOW can i replace/revert BEYOND the basic sbf...
If ya point me in a direction or to someone who can help me out i can do all the foot work just point me in the right direction?

Is this applicable? I found a site talking about using CWM in a ADB shell file push to possibly get access to more features?
The article also goes into reading the busybox / ADB command screen? (sorry for not proper jargin) and see what its doing during the boot loop before it restarts?
Id add the link but i need more posts....

Update: Flashed 18_2 again with a "factory cable" i made, let it boot loop a series of times before it started up into the stock system again.
At first, again the touch screen wouldn't work, random lockups and restarts, etc. Since i just got it into the main system again and i had to leave for the weekend for a trip(no wifi or network), i couldn't mess with it all weekend but i left it on the whole time and kept checking its functionality... gradually its come back to full function. Touch screen works and is accurate, no more lockups, no more restarting, even stopped boot looping when i restart and enter recovery..
Im not sure and i couldn't find any forum converstations or write ups to support to idea but i think after a major crash and you flash new or reflash your SBF, it seems the phone needs time to recalibrate and index? Not sure, but just an FYI. Gonna try loading SS and liquid again.

Boot Loop

I have had my HTC One M7 shortly after it was release. I got it from ATT. I immediately found a guide here and rooted it. I had TWRP and every time ATT tried to push an OTA I would refuse. I haven't bothered with it until a couple weeks ago when I wanted to put in KIT KAT. so I found m7_Stock_Rooted_4.18.502.7_odex.zip. I did a dirty upgrade, as the thread said it was okay. And it was. I am going on a trip so I purchased a sim unlock code in between upgrading to kitkat and today.
I got another OTA. I must not have read the bootloader correctly to refuse the install. I was no longer rooted. I come back to XDA and thought what the heck, I'll try out this ROM, it looks nice: Android_Revolution_HD-One_83.1.zip. I use TWRP to put the ROM in and now I am full of fail. After a little bit of Google I decided to try to do a factory reset. And now I am stuck in a boot loop. I have went back to Google but so far all I have seen is use adb or some other method to put things on the "sd card". But how would I do that when this phone doesn't have a sim card and I can't hook it up to my computer anymore? FWIW at some point in the boot loop my computer will recognize the phone, but it won't stay in that state long before it goes away. What happens is my phone starts too boot. Boot screen comes up. After about 10-15 seconds it restarts. This time saying entering recovery.... at the top. That lasts for about 2 seconds, phone goes black and reboots like normal. Over and over.
Best I can do is get to the android hard reset screen by holding power and reset screen. But that is saying "tampered" and "unlocked" at top. I chose the factory setting option and that doesn't do anything to alter the current state.
Edit:
When I went to flash Android Revolution ROM I chose wipe data. It gave some error that some files were not copied. So I ran it again, straight from TWRP. But that never installed right and I was stuck in a boot loop. I don't have many options with the android hard reset menu. But if choose restore, I will get to see the screen from TWRP flash for just a moment before it goes away and reboots.
Also I do see my phone when I have it plugged in the control panel (windows). Under devices and printers, it is listed as Android 1.0 under unspecified devices.

Budee80 said:
I have had my HTC One M7 shortly after it was release. I got it from ATT. I immediately found a guide here and rooted it. I had TWRP and every time ATT tried to push an OTA I would refuse. I haven't bothered with it until a couple weeks ago when I wanted to put in KIT KAT. so I found m7_Stock_Rooted_4.18.502.7_odex.zip. I did a dirty upgrade, as the thread said it was okay. And it was. I am going on a trip so I purchased a sim unlock code in between upgrading to kitkat and today.
I got another OTA. I must not have read the bootloader correctly to refuse the install. I was no longer rooted. I come back to XDA and thought what the heck, I'll try out this ROM, it looks nice: Android_Revolution_HD-One_83.1.zip. I use TWRP to put the ROM in and now I am full of fail. After a little bit of Google I decided to try to do a factory reset. And now I am stuck in a boot loop. I have went back to Google but so far all I have seen is use adb or some other method to put things on the "sd card". But how would I do that when this phone doesn't have a sim card and I can't hook it up to my computer anymore? FWIW at some point in the boot loop my computer will recognize the phone, but it won't stay in that state long before it goes away. What happens is my phone starts too boot. Boot screen comes up. After about 10-15 seconds it restarts. This time saying entering recovery.... at the top. That lasts for about 2 seconds, phone goes black and reboots like normal. Over and over.
Best I can do is get to the android hard reset screen by holding power and reset screen. But that is saying "tampered" and "unlocked" at top. I chose the factory setting option and that doesn't do anything to alter the current state.
Edit:
When I went to flash Android Revolution ROM I chose wipe data. It gave some error that some files were not copied. So I ran it again, straight from TWRP. But that never installed right and I was stuck in a boot loop. I don't have many options with the android hard reset menu. But if choose restore, I will get to see the screen from TWRP flash for just a moment before it goes away and reboots.
Also I do see my phone when I have it plugged in the control panel (windows). Under devices and printers, it is listed as Android 1.0 under unspecified devices.
Click to expand...
Click to collapse
which twrp version do you have installed?

little123 said:
which twrp version do you have installed?
Click to expand...
Click to collapse
Thanks dude. I had an older version, since I originally rooted this phone around 18 months ago and used a version from back then. I watched a youtube video how to push TWRP onto a soft bricked device using ADB. After that, I was able to install the ROM.

Budee80 said:
Thanks dude. I had an older version, since I originally rooted this phone around 18 months ago and used a version from back then. I watched a youtube video how to push TWRP onto a soft bricked device using ADB. After that, I was able to install the ROM.
Click to expand...
Click to collapse
glad i could help with just a question

Stuck on AT&T logo and cannot enter recovery mode

This is my first post, but I've had my phone rooted for a few months now with no problems until today out of the blue. What I've done to root my phone in the first place was flash to 4.4.2 NE3, root it, then upgrade to 5.0.1 OC 7 DeOdexed while keeping the root according to the link below. And then I put Xposed framework on it.
https://forum.xda-developers.com/galaxy-s4-active/general/how-to-update-to-i537oc6-5-0-1-t3089355
And this has worked well for me for a few months since that was back at the end of December. Flash forward to today when my phone was being rather slow to respond to my actions so I decided to restart it. And upon restarting it, it's been stuck on the AT&T logo screen for a very long time. I can power it down with the power button, but think it actually just restarts it because then it boot ups again on its own. I cannot enter recovery mode with power+home+volume up, but I can get to the custom OS screen with power+volume down. My computer cannot see it as an adb device either. I've also tried removing the SIM card and the SD card and it's still gets stuck at the AT&T logo.
I've done nothing different with the OS or Xposed recently. The only new thing was about 2 hours prior to restarting it, I connected it to my computer to transfer some video files to the sd card. While I had it connecting to the computer and looking at the files on it through the phone's My Apps, it was sluggish to respond to my actions. But after disconnecting it, it was fine. I don't know if this is related, but I haven't done anything else different with it. Is there anyway to get my phone to boot up correctly? Or am I going to have to reflash it all over again? Thank you for any help.
Edit: I can enter recovery mode and I tried wiping the cache. It still gets stuck at the AT&T logo screen. I should also note that it no longer shows the Samsung "custom" boot screen anymore like it used to after rooting, now it just has the default Samsung boot screen, so it would certainly seem like my OS has been corrupted.