I was running the lastest build of maclaw's 10.2 from feb 25th but my wifi stopped picking up any signal and when it tries to the cpu is maxed out to 1Ghz.
I've tried the 1ghz bug fixes of turning off wifi and rebooting, changing the scheduler and the governor, They stopped the high cpu usage but i still can't use wifi.
I've tried going back to old versions of the ROM but the problem was still there even after i tried 1Ghz bug fixes again.
when i leave the phone to rest it gets hot (not very hot just hot) and the battery is going down fast! all of which i assume is due to high cpu usage.
Can you help? please?
I would have posted in maclaws thead for the ROM but i don't have enough posts
All help welcome!
Cheers!
gingystevie said:
I was running the lastest build of maclaw's 10.2 from feb 25th but my wifi stopped picking up any signal and when it tries to the cpu is maxed out to 1Ghz.
I've tried the 1ghz bug fixes of turning off wifi and rebooting, changing the scheduler and the governor, They stopped the high cpu usage but i still can't use wifi.
I've tried going back to old versions of the ROM but the problem was still there even after i tried 1Ghz bug fixes again.
when i leave the phone to rest it gets hot (not very hot just hot) and the battery is going down fast! all of which i assume is due to high cpu usage.
Can you help? please?
I would have posted in maclaws thead for the ROM but i don't have enough posts
All help welcome!
Cheers!
Click to expand...
Click to collapse
Is the feb 25th build the latest one!? You did all that I would suggest to you, so do a nadroid backup (just in case) & do a clean install or flash the newest cm 10.2 version.
mauam said:
Is the feb 25th build the latest one!? You did all that I would suggest to you, so do a nadroid backup (just in case) & do a clean install or flash the newest cm 10.2 version.
Click to expand...
Click to collapse
Yep it's the latest build for cyanogenmod 10.2 anyway. I'd rather not do a clean install but if i have to i might just go back to an offical rom or maclaws cyanogenmod 11 but that appears to have the 1Ghz bug too.
Thanks for the reply too!
gingystevie said:
Yep it's the latest build for cyanogenmod 10.2 anyway. I'd rather not do a clean install but if i have to i might just go back to an offical rom or maclaws cyanogenmod 11 but that appears to have the 1Ghz bug too.
Thanks for the reply too!
Click to expand...
Click to collapse
Test THIS PATCH. It should work for 10.2 too.
J.
JackoMJ said:
Test THIS PATCH. It should work for 10.2 too.
J.
Click to expand...
Click to collapse
The app works to keep the wifi off for restarts and shutdowns(great, Thanks!) but is there anyway i can still use wifi?
gingystevie said:
The app works to keep the wifi off for restarts and shutdowns(great, Thanks!) but is there anyway i can still use wifi?
Click to expand...
Click to collapse
Can you explain better what you mean!?
but is there anyway i can still use wifi?
Click to expand...
Click to collapse
i don´t understand...
if you use the patch wifi turns on after a reboot automatically without the 1 GHz bug (as it should be...)
So what´s the problem bud?
mauam said:
Can you explain better what you mean!?
Click to expand...
Click to collapse
Sorry, The wifi can't detect any signal and while it's turned on the cpu stays at 1ghz
Thats the problem
The app sets it so the wifi is never on after reboot so the cpu usage is fine untill i try turn on the wifi
Is that clear? I'm terrible at explaining things sorry.
I just want my wifi to work so i can connect to a network
gingystevie said:
Sorry, The wifi can't detect any signal and while it's turned on the cpu stays at 1ghz
Thats the problem
The app sets it so the wifi is never on after reboot so the cpu usage is fine untill i try turn on the wifi
Is that clear? I'm terrible at explaining things sorry.
Click to expand...
Click to collapse
Much better now. Have you read the post above (from Jacko)!?
...The wifi can't detect any signal...
Click to expand...
Click to collapse
But this problem does not depend on the 1 GHz bug.
Try to reflash the ROM or better flash a better one like this one i use ...:angel: (with no wifi problems anytime)
J.
JackoMJ said:
But this problem does not depend on the 1 GHz bug.
Try to reflash the ROM or better flash a better one like this one i use ...:angel: (with no wifi problems anytime)
J.
Click to expand...
Click to collapse
aaaaaaaa I thought it was part of that bug. Alright time for another ROM!
Thanks!
gingystevie said:
aaaaaaaa I thought it was part of that bug. Alright time for another ROM!
Thanks!
Click to expand...
Click to collapse
BUT REMEMBER: afaik all custom ROMs (and i tested them all for our device :angel have this 1 GHz bug.
But this is no problem: just turn off wifi manually before restarting the device (takes almost a second ...)
J.
Alright so I've changed to many different roms now and all of them have had this problem.
I've tried maclaws cm10.1, carbon and then cm 11, Cm 11 worked for a few days but the problem returned
I then tried carbon by kevinjoa and marclaws cm 10.2 again but still no wifi
I've just restored it back to out of the factory samsung rom and recovery, my wifi is back! hope it lasts now!
Just to be clear the problem is the wifi can't find any signal at all! and sometimes it cant even turn on. When the phone is trying to do either of those it drives the cpu to max out.
If you have this problem or know what it is or have any ideas how to fix it let me know!
Ok so the problem came back on the stock rom so i'm thinking it's a hardware problem but i need to know specifics like is it the wifi ic chip or what?
I flashed the latest cm10.2 and did a full wipe
I then got a log from the syslog app and i've attached it below, i cant understand anything in it so can you help with that? is there any information in the log as to was the problem is?
right
I noticed that too most custom rom have issue with wifi or gps
but it will fix with time I think
mahmoud20070 said:
I noticed that too most custom rom have issue with wifi or gps
but it will fix with time I think
Click to expand...
Click to collapse
Thats what i thought i might be for a while but i had the problem in the stock samsung rom too.
ok so i don't think it's the ic as the bluetooth is still working fine,
i've also found there are two scenarios:
1.
The wifi can't turn on at all it constantly says turning wifi on....
2.
The wifi takes a few minutes to come on and then it can't pick up any signal at all.
In both of these scenarios the cpu is maxed out constantly too
Also could a mod please change the title of this thread to something like wifi problems please
I'm still trying to fix this guys, I could really use some help.
I've been doing more testing and firstly if I remove the sim and sd cards and boot back up SOMETIMES the wifi will come on with no problems,
I've also found that if i turn on the bluetooth and then reboot the phone the wifi SOMETIMES comes on with no problems
If i combine removing the cards and turning on the bluetooth the wifi ALWAYS works.
When i say the wifi works with no problems i mean NO problems, I can reboot with the cards again and with the bluetooth off and it still works but only for a short time ( 1 or 2 days)
I think the bluetooth is boosting the wifi signal or something and I've idea how/why removing the cards works.
Any ideas?
Thanks
Just posting a small update about 1GHz bug in Mac's 10.2 rom. The very latest release (20140621) is awesome and very good. However, I get the 1GHz bug a lot more than with previous releases. I am also using the GT-I8190XXANR6_modem baseband from http://forum.xda-developers.com/showthread.php?t=2526831 which is currently the latest one. There should be a new release from Mac shortly, with new samsung kernel... Maybe that does something?
Does anyone else have different results with this rom, but other baseband?
Related
Hello Community!
I've got a problem with my Galaxy Ace. I've installed the latest CM7 nightly (2012-10-14) and installed CronMod INT2EXT+ script.
In addition i've installed the newest Firekernel (2012-10-09) OC, official.
I've encountered a problem while using Bluetooth. With enabled Bluetooth the phone won't go into Deep Sleep mode. Is it a Kernel problem, or has it something to do with CM7?
Hoping to find a solution for my problem.
Cheers
Alex
Hello
I have the same problem
Did you find a solution ?
Maybe it's normal behaviour ?
acca said:
Hello
I have the same problem
Did you find a solution ?
Maybe it's normal behaviour ?
Click to expand...
Click to collapse
Nope, no solution till now... I think i will try it with the stock kernel of CM7... Maybe it's because of the Firekernel...
Hubrrr said:
Nope, no solution till now... I think i will try it with the stock kernel of CM7... Maybe it's because of the Firekernel...
Click to expand...
Click to collapse
I installed stocklite v7.1 and no deep sleep problem.
I'll try to find from were comes the problem in the following days.
I'll update you
Stock CM Kernel
I've just tried the stock CM7 Kernel, but also no Deep Sleep while Bluetooth is enabled.
The rom with wich i encoutered this problem is based on cm7.
Maybe we are not alone in this case but nobody else care about it.
acca said:
The rom with wich i encoutered this problem is based on cm7.
Maybe we are not alone in this case but nobody else care about it.
Click to expand...
Click to collapse
Jep, i think so too.. I am not allowed (min. 10 posts) to post in the DEV section till now...
I've bought a SmartWatch, but without Bluetooth connection it's not that smart but i dont want to charge my Phone every day... And also Stock for the Ace is not really an option for me... I prefer CM7...
Hubrrr said:
Jep, i think so too.. I am not allowed (min. 10 posts) to post in the DEV section till now...
I've bought a SmartWatch, but without Bluetooth connection it's not that smart but i dont want to charge my Phone every day... And also Stock for the Ace is not really an option for me... I prefer CM7...
Click to expand...
Click to collapse
You should try Stocklite 7.1
http://forum.xda-developers.com/showthread.php?t=1703094
It has a very good battery life
I added int2ext+ to extend internal memory to sdcard
adrenaline engine to speed up the phone
firekernel
and ICS MOD http://forum.xda-developers.com/showthread.php?t=1926596
now my rom is pretty close to CM7
acca said:
You should try Stocklite 7.1
http://forum.xda-developers.com/showthread.php?t=1703094
It has a very good battery life
I added int2ext+ to extend internal memory to sdcard
adrenaline engine to speed up the phone
firekernel
and ICS MOD http://forum.xda-developers.com/showthread.php?t=1926596
now my rom is pretty close to CM7
Click to expand...
Click to collapse
Okay, seems to be a nice combination of mods...
But Firekernel with a Stock ROM? Is everything working properly then (WiFi, Bluetooth)?
Hubrrr said:
Okay, seems to be a nice combination of mods...
But Firekernel with a Stock ROM? Is everything working properly then (WiFi, Bluetooth)?
Click to expand...
Click to collapse
Like a charm
I tried many roms, for me its the best in terms of battery life/reactivity (i don't play games).
I had strange behaviour after installing one of those mods (on don't remember wich one) but after a restart everithing is ok.
In this configuration mi battery is at 60% after a day of work (about 12 hours), my average use is half an hour of call, bluetooth always on and connected during one hour, wifi and 3g always on.
I use Juice defender but never compared with and without
Nice, but when i tried the ROM yesterday i was not able to see my SmartWatch...
Neither with the ROMs Kernel, nor with the Firekernel... I tried only the ROM without any modification but also the same result!
I was able to connect to my Notebook and to other Phones but i was not able to see my Smartwatch.
Very strange behavior and i don't know why... My Notebook and other Phones could connect to the Watch... Now i switched back to CM7 and it's working again...
Hubrrr said:
Nice, but when i tried the ROM yesterday i was not able to see my SmartWatch...
Neither with the ROMs Kernel, nor with the Firekernel... I tried only the ROM without any modification but also the same result!
I was able to connect to my Notebook and to other Phones but i was not able to see my Smartwatch.
Very strange behavior and i don't know why... My Notebook and other Phones could connect to the Watch... Now i switched back to CM7 and it's working again...
Click to expand...
Click to collapse
Sorry but i don't know why !
please tell me if you find the solution to deep sleep with CM7
acca said:
Sorry but i don't know why !
please tell me if you find the solution to deep sleep with CM7
Click to expand...
Click to collapse
Did you try this : http://forum.xda-developers.com/showthread.php?t=1817424 ?
It didn't work for me
Regards
acca said:
Did you try this : http://forum.xda-developers.com/showthread.php?t=1817424 ?
It didn't work for me
Regards
Click to expand...
Click to collapse
Yes, I tried it but it's not working for me either... Damn Deep Sleep problem...
Hello,
I'm having problems with wi-fi connection,in fact it doesn't connect at all.
I'm running on CyanogenMod 10.1 i also was in slim bean before CM,and in slim bean the wi-fi connection problem started.
First when i put in the Slim bean,the Wi-Fi worked for a week ,then it didn't worked anymore.
The option "On-Off" to connect,it's often disabled so i can't even turn it on to search,and sometimes when i turn it on,it just keeps looking for Wi-Fi and nothing appears,though i have Wi-Fi in my house.
Does anyone know what should i do ?
p.s i got samsung galaxy s1 gt-i9000
Regards
ArlindXh said:
Hello,
I'm having problems with wi-fi connection,in fact it doesn't connect at all.
I'm running on CyanogenMod 10.1 i also was in slim bean before CM,and in slim bean the wi-fi connection problem started.
First when i put in the Slim bean,the Wi-Fi worked for a week ,then it didn't worked anymore.
The option "On-Off" to connect,it's often disabled so i can't even turn it on to search,and sometimes when i turn it on,it just keeps looking for Wi-Fi and nothing appears,though i have Wi-Fi in my house.
Does anyone know what should i do ?
p.s i got samsung galaxy s1 gt-i9000
Regards
Click to expand...
Click to collapse
As you can see, issues regarding Wi-Fi connectivity is related to the kernel that's installed. Try flashing a different kernel and check if it has any improvements.
takeoutttt said:
As you can see, issues regarding Wi-Fi connectivity is related to the kernel that's installed. Try flashing a different kernel and check if it has any improvements.
Click to expand...
Click to collapse
Do you have any suggestion,what kernel should i use ?
Or how should i change it...
ArlindXh said:
Do you have any suggestion,what kernel should i use ?
Or how should i change it...
Click to expand...
Click to collapse
if your device is i9000, I suggest go for Devil Kernel it's been great since then. Just download the zip file put it in your storage, go to recovery (CWM) and flash it in there. There are instructions in that thread. Godspeed!
takeoutttt said:
if your device is i9000, I suggest go for Devil Kernel it's been great since then. Just download the zip file put it in your storage, go to recovery (CWM) and flash it in there. There are instructions in that thread. Godspeed!
Click to expand...
Click to collapse
i installed Devil Kernel,but still same problem. I think the problem is elsewhere...
Does anyone has any idea what the problem might be ?
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
set your brightness to 20% and always turn-off wifi when its not in use ....its works for me....played my tab for 30 minutes and my tablet consumed only 15% of the battery
SORRY FOR MY BAD ENGLISH
*i also turn off mobile data......when i dont need to use the internet....
frrambo said:
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
Click to expand...
Click to collapse
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
Thanks, I'll give it a shot.
imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
I always get encryption failed when installing alroger builds - I guess you are not running CDMA (p1c) ?
If you are using a p1c then you are lucky to have alroger working.
cdesai builds work great on p1c but usb tether doesn't seem to work on any CM10.x build yet which is annoying
Re: CyanogenMod 10.1 Experimental Builds
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Sent from my SCH-I800 using Tapatalk 2
frrambo said:
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Click to expand...
Click to collapse
Yeah alroger's newest builds are broken on p1c but if you go back to his first p1c release it actually works okay http://goo.gl/QBsmn
Actually I came back to the tab tonight and it was constantly rebooting in a loop so I may go back to cdesai too.
The one I am really waiting for is AOKP 4.2.2 for p1c, apparently his build machine is broken but hopefully he will post it soon.
But I cannot do usb tether or otg in any 4.1.x or 4.2.x build yet which is frustrating.
CM9.1 is very stable but missing all the 10.1 niceties.
You should put "p1c cmda" in the thread title here so we can have a 10.1 "club" for p1c folks.
I am running alrogers latest builds without any problem on my p1. Fast reliable and without any problems
I noticed fewer problems of unattended sleep or reboot after I flushed Dalvik and partition caches.
But the device still drains battery faster than the lastest CM10 nightlies (screenshots included) did, mostly because of the radio (30% - veille GSM) and while inactive (21% - tablette inactive).
Do you experience the same? Do you know where it could come from? (since I'm not able to post to dev section yet, too).
Re: CyanogenMod 10.1 Experimental Builds
If you have unknown baseband also, then the cause has been widely known. Broken modem.
Download JPZ modem zip from the development forum, unzip it and paste modem.bin to /radio to replace the one there.
Sent from my GT-I9300 using xda app-developers app
alroger's newest build from 20130328 now has working usb tether and works on my cdma (p1c)
but it's missing an adb toggle, cannot find it for the life of me
aha! found it - in CM10 you have to go to settings -> about tabet -> build number -> tap 7 times (to enable dev mode)
So several days after reflashing cdesai's experimental build I'm happy to report only one SoD compared to one or two previously.
With a bootlooping recovery, I used Heimdall to re-stock (mostly, I used a CWM kernal). I then reflashed with the same proceedure as before, wiping cache/dalvic, flashed gapps and I'm good to go.
Aside from the USB tether and BT issues (maybe someday...), my only problem now is that the screen orientation is sometimes unresponsive. Even the battery life is good, better than I had on CM 9.
I've not had any radio problems, at least none that Better Battery Stats could show me. The modem is the likely culprit.
Good suggestion on the title change p1c needs more love! :highfive:
Of course now with _ck_'s news that alroger has USB tether working, I'm tempted to try it again. Just can't leave well enough alone.
Just came back to my tablet to wake it up and the screen shows "encryption unsuccessful" wtf
Maybe alrodger build is not quite ready.
Spent an hour getting everything right again but not messing around this time, did both Titanium backup and clockwork backup.
Hi, i have S3 Mini, and i have installed maclaw's rom 4.4.2 CM11, and now Carbon, all recent updates... I have the problem of random reboots when im charging or when i have a poor signal or less battery... When i'm ussing a lot of CPU, this automatly reboot.. How can i fix it? I tried to flash RIL and MODEM of STOCK rom and the reboots are less now, but, this keep going on... Some answer?
PS.: After reboot, my battery lvl was 27% and now 82% for example... When the battery shows 100% i need to restart 10 or 12 for fully charging 100%.... I think the signal is the major problem and de CPU... I'm using PEGASUS(before INTERACTIVE)
You can't do anything about the random reboots since it is a CyanogenMod bug. Did you do a clean install or a dirty flash?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
You can't do anything about the random reboots since it is a CyanogenMod bug. Did you do a clean install or a dirty flash?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
Yes, wipping ALL... For the first time, after full charge, when i wipe dalvik cache the problem was fixed, the next charge the problem persist... Now, i'm charging phone, if i dont have DATA mobile ON, or wifi ON, the phone's doesn't reboot automatly... When i switch on, the phones reboot.... I think the problem is the signal or the high cpu utilization...
certum said:
Yes, wipping ALL... For the first time, after full charge, when i wipe dalvik cache the problem was fixed, the next charge the problem persist... Now, i'm charging phone, if i dont have DATA mobile ON, or wifi ON, the phone's doesn't reboot automatly... When i switch on, the phones reboot.... I think the problem is the signal or the high cpu utilization...
Click to expand...
Click to collapse
I'm running the same ROM and I don't have any of those problems (except for a few random reboots). Did any of those problems exist on stock?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
I'm running the same ROM and I don't have any of those problems (except for a few random reboots). Did any of those problems exist on stock?
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
No no no, in the stock rom everythins works fine..
certum said:
No no no, in the stock rom everythins works fine..
Click to expand...
Click to collapse
Weird. Then I'm afraid I can't help you :/.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
Weird. Then I'm afraid I can't help you :/.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
Actually, i updated the rom to new release 16 03 2014, "Updating Android", and the ROM has random reboots.... I'm very tired of this hahaha
i have the same problems I get random reboots quite often and when I receive a message on whatsapp, it reboots aswell
certum said:
Actually, i updated the rom to new release 16 03 2014, "Updating Android", and the ROM has random reboots.... I'm very tired of this hahaha
Click to expand...
Click to collapse
LMH1998 said:
i have the same problems I get random reboots quite often and when I receive a message on whatsapp, it reboots aswell
Click to expand...
Click to collapse
Those random reboots known are CM 11 bugs. Maybe you should report them to Maclaw. Maybe he can fix it, or else you'll have to wait for the CM team to fix it.
Remember, CM 11 is still under heavy development, so bugs are still present.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
GXGOW said:
Those random reboots known are CM 11 bugs. Maybe you should report them to Maclaw. Maybe he can fix it, or else you'll have to wait for the CM team to fix it.
Remember, CM 11 is still under heavy development, so bugs are still present.
Sent from Tapatalk on my GT-I8190 running MaclawStudio's Carbon 4.4.2
Click to expand...
Click to collapse
I'm very decided thats the problem is volting or CPU freq... If you doesn't have activated the internet/red signal, and you run a stability test, the phone crushs too... So, i download SetCPU and Voltage Control and i can't see the voltages of freqs!! How can i see that? You know?
I tried to disable xposed frameworks, this incresed the cycle of reboots, more stability, but this is because the CPU doesn't work at max voltage... So, the next question is:
How can i change the voltage frequencies???
certum said:
I'm very decided thats the problem is volting or CPU freq... If you doesn't have activated the internet/red signal, and you run a stability test, the phone crushs too... So, i download SetCPU and Voltage Control and i can't see the voltages of freqs!! How can i see that? You know?
I tried to disable xposed frameworks, this incresed the cycle of reboots, more stability, but this is because the CPU doesn't work at max voltage... So, the next question is:
How can i change the voltage frequencies???
Click to expand...
Click to collapse
The kernel is not capable of that. If your CPU can't run on maximum voltage, it means it is a hardware problem, so you'll have to return it to the store where you bought it.
GXGOW said:
The kernel is not capable of that. If your CPU can't run on maximum voltage, it means it is a hardware problem, so you'll have to return it to the store where you bought it.
Click to expand...
Click to collapse
I don't say that, i say the problem is in the kernel, the kernel have issues with GPU at max freq or max voltage... My phone have 6 months, and the stock ROMS works fine at 1Ghz and max. voltage... I dont concider the phones have hardware problem... Today i'll be tried to put stock kernel and test that..
certum said:
I don't say that, i say the problem is in the kernel, the kernel have issues with GPU at max freq or max voltage... My phone have 6 months, and the stock ROMS works fine at 1Ghz and max. voltage... I dont concider the phones have hardware problem... Today i'll be tried to put stock kernel and test that..
Click to expand...
Click to collapse
Installing the stock kernel over this ROM is a bad idea, since the stock kernel is made for 4.1.2 and you're running a 4.4.2 ROM. You better return to the whole stock ROM.
GXGOW said:
Installing the stock kernel over this ROM is a bad idea, since the stock kernel is made for 4.1.2 and you're running a 4.4.2 ROM. You better return to the whole stock ROM.
Click to expand...
Click to collapse
((( the stock rom is a lazy rom
certum said:
((( the stock rom is a lazy rom
Click to expand...
Click to collapse
I know, that's why I've switched to custom ROMs. I'm sorry, but I can't help you any further
Odin
I always flash the roms with odin and had never any reboots...
All right, i dont see the diference, but, i try this method so
Any update on this? I'm having the same issue (reboots, batery goes from 90% to 20%...) with Maclaw's CM11.
Hi, I cant post on CM11 board so ill post here. Updated new Cm11 Novafusion late last night and had clock freeze at lunch time.
There was supposed to be a fix on last release and nobody on the Cm11 thread has posted with any problems.
Doesnt happen much to me, just thought Id let people know.
clag40 said:
Hi, I cant post on CM11 board so ill post here. Updated new Cm11 Novafusion late last night and had clock freeze at lunch time.
There was supposed to be a fix on last release and nobody on the Cm11 thread has posted with any problems.
Doesnt happen much to me, just thought Id let people know.
Click to expand...
Click to collapse
oh well is was like updated stable rom, which they updated like 02.10 and is it still having that clock freeze bug? and how is batter drain like? is it ok about it? and also about wi-fi? did you have any trouble about it? im planning to flash that also but waiting for a while to check till they fix it but they are working really hard tho.
Battery and wifi fine for me. I rarely have clock freeze bug so it doesnt bother me really, I guess if it made me late when Id set an alarm that would bother me tho......
You need to turn automatic date & time, and automatic time zone on (obviously with data enabled) at least that works for me on OmniRom... and there's another workaround for that.. try deleting CLock on priv-app folder... that has worked for some users
Hi, i too have this bug, I'm on the latest omni by goldenguy with latest baseband and Andi's multiboot kernel. The clock froze several times, even with Wi-Fi on. It corrects itself when de- and reactivating Wi-Fi. Further, the clock sometimes runs a bit late, about 2 minutes. I've checked the needed auto-time settings.
My gsm-data is always off, I'm using a prepaid card.
Never had a single freeze on maclaws cm 10.2.
Can anybody image what goes wrong?
Thanks!
PS I'm posting here, because XDA doesn't let me write in the Dev thread.
Sent from my GT-I8190 using xda app-developers app
I''m running the latest Paranoid Android from maclaw and I still get this clock freeze bug. It causes so much trouble for me. Can't find a stable ROM for this device.
beanaroo said:
I''m running the latest Paranoid Android from maclaw and I still get this clock freeze bug. It causes so much trouble for me. Can't find a stable ROM for this device.
Click to expand...
Click to collapse
Try novafusion's cm10.2. No freeze for me with this rom.
Bir