Database Develop

CM7 not booting

I installed the CM7 17 build the day it was released, everything was working fine.
Last night I had downloaded a bunch of apps and shut it down.
Now when I turn it on it is stuck at the 'Touch The Future of Reading' screen.
Any ideas?
I have powered it off 3 times and let is sit for 10 minutes... nothing.
sent from my laptop sitting in my desk chair

Hopefully you have clockwork mod installed. Something may have been corupted, possibly your boot partition. Either restore a backup via clockwork mod, or reinstall CM7 via bootable micro SD-card.

I booted into CWM, formatted the cache partition, then installed build 19.
Everything seems to be working.
Bluetooth turns on now, it did not before.
All of my apps are still installed.
For future reference, when updating to newer releases, do you only need to format the cache then install the latest zip?

after you flash the zip, go into the advanced menu and clear delvik-cache. CWM may freeze, it's not a problem just hold down pwr button untill it turns off. The wipe of the delvik-cache does go through. Also the first boot after wiping devik takes a long time, don't worry.

Ok I did not do that, should I go back and do that?
So for anyone else reading.
To update from say build 17 to 19 or 20... as they are released
Boot into CW
Format the cache
Flash the zip
wipe delvik-cahce

I would go back and clear delvik to prevent any furture complications. Especially if you flash a new kernel (i.e. the OC kernel).

Turned it on this morning and it as stuck again.
Booted into CWR, formatted cache and wiped dalvik. ... Nothing

I got it after formatting cache then wiping cache.
I don't know why it is doing this...
Could it have anything to do with OC to 925?
I am not using setcpu just the cyan settings

Stuck at "touch the android to begin"

This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.

I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!

It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc

Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?

Just wipe both cash and user data, and reboot.

reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did

Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks

liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics

I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy

But its not wroking for me

[Q] Issue with rebooting custom ROMs

One or two weeks ago I flashed PAC 4.3 (coming from 4.3 leak) and it worked without a single error. Then after I rebooted my phone it just get's stuck on the bootanimation and I have to take out the battery, get into CWM, wipe dalvik-cache and cache and then it would work, although that means that my phone generates the dalvik cache at each boot, which consumes a lot of battery and last about 3 minutes, which is really annoying. I thought it's a problem with PAC so I flashed the latest CM11 nightly and get the same thing . I'm quite experienced with flashing custom ROMs and Kernels, so please don't go full noob explanation on me .
Thanks in advance :good:
Update: After wiping data the phone reboots normally. Could it be an app causing it?

paxy97 said:
One or two weeks ago I flashed PAC 4.3 (coming from 4.3 leak) and it worked without a single error. Then after I rebooted my phone it just get's stuck on the bootanimation and I have to take out the battery, get into CWM, wipe dalvik-cache and cache and then it would work, although that means that my phone generates the dalvik cache at each boot, which consumes a lot of battery and last about 3 minutes, which is really annoying. I thought it's a problem with PAC so I flashed the latest CM11 nightly and get the same thing . I'm quite experienced with flashing custom ROMs and Kernels, so please don't go full noob explanation on me .
Thanks in advance :good:
Update: After wiping data the phone reboots normally. Could it be an app causing it?
Click to expand...
Click to collapse
usually if phone stuck at boot animation, the main problem mostly cause by app data/cache, i my self encounter many same situation with other phone, samsung, htc, and after wiping cache and data, the problem gone..also, i notice if flash from stock to custom, or custom that based on stock then go to AOSP custom without wiping data, then most time phone will stuck at boot animation..but rarely i encounter stuck after wiping data (some folder wrongly placed in the zip file that cause the problem)

[Q] Tablet is acting strange

Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel

danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Do you ever wipe the system partition?

upconvert said:
Do you ever wipe the system partition?
Click to expand...
Click to collapse
Agree. In TWRP, a factory reset only wipe data, cache and dalvik cache. You have to manually format system. A clean install requires to wipe system, data, cache and dalvik-cache.
---------- Post added at 08:18 AM ---------- Previous post was at 08:17 AM ----------
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Try flashing the original firmware via odin.

iZLeeP said:
Try flashing the original firmware via odin.
Click to expand...
Click to collapse
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?

danizmax said:
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
Click to expand...
Click to collapse
Of course. Flashing original firmware via odin brings back the original setup that came with the tab out of the box. I just don't remember if it will delete the contents of internal sd card. In any case, you can flash original firmware thru CWM as I always do, though I only flash boot and system images I modified in Kitchen. It will still be stock but only that it has been debloated, rooted, busybox installed, init.d enabled, and some system apps replaced.
Just remember that when flashing ROMs via CWM do a factory reset (wipe data, cache, dalvik-cache). In addition to the wipe, the rom.zip itself formats the system partition prior to flashing.

[Q] Phone Stuck At Boot Animation Screen

Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.

Talha10 said:
Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Click to expand...
Click to collapse
Are you do a full wipe, before flashing another custom rom?

I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache

Talha10 said:
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Click to expand...
Click to collapse
I suggest you install the stock rom using odin. It seems you have some corrupted files. Before flashing the stock rom, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Once you have flashed the stock rom, go to recovery mod and do Wipe Data/ Factory Reset and Wipe Cache Partition (otherwise bootloop might occur). After that install root and CWM from the recovery mod. Now you can install any other custom rom without any problem. Do post your results. Hope I Helped

When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all

Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
---------- Post added at 06:03 AM ---------- Previous post was at 06:00 AM ----------
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
And, try redownload, and flash that rom again. Maybe, it's corrupted.

i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times

Talha10 said:
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Click to expand...
Click to collapse
Try installing CWM 5 from the recovery mod. CWM 5 is much more stable than CWM 4. Once you have installed CWM 5, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Then try to flash any working rom with it. Here is the link,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your result. Hope I Helped

i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps

Talha10 said:
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Click to expand...
Click to collapse
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped

mahithm said:
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
Click to expand...
Click to collapse
Yes im sure i do all of them always