[Q] No boot :: Stuck on Sony Logo Screen - Xperia Z1 Q&A, Help & Troubleshooting

Hi,
I've been trying to install RomAUR with no success.
I have an unlocked bootload (previously came from CM11) and have done the following:-
1. Placed rom zip onto external sd
2. installed zip via recovery, choosing full wipe, and the files from 6903 UB in aroma.
3. power off phone via advanced menu
4. Installed 14.2.A.1.142 kernel ftf via flashtool
I just cant seem to boot.
I know how to restore my phone, thats not the issue, the issue is I want to run a rom that supports call recording. I cant get any rom to work
Does anyone have a fool proof way to install RomAUR onto my phone? If it helps, I will be starting from the 14.2.A.0.290 stock ftf

Related

Sony Xperia ZL / root

Hello guys.
Please tell me which is the easiest way to root the phone ( model C6502 )
I found this link but i want to ask you if it's safe to do it this way.
http://www.oneclickroot.com/phone/sony-xperia-zl/
I checked this out, too, but im not sure the way how to do it.
http://forum.xda-developers.com/showthread.php?t=2327472
Thank you in advance
I tried many times to root the phone, unfortunately i couldn't.
Special thanks to user destroyedbeauty, he adviced my ( in PM ) step by step how to do it, but still no success.I followed the steps very careful.
When i tried to root, i didn't check USB Debugging & Unknown Sources.
Should i ?
Is there a way to install apps which require root, on the phone with no root ?
Below are the steps i tried to root the phone, adviced by the mentioned user.
I rather recommend that you install an kernel with pre-configed root access (Doomkernel / Advanced Stock kernel / XzK-kernel) by using built-in Fastboot in Flashtool. By doing this method, do this!!!:
1) Download kernel ZIP from specific kernel thread in "Xperia Z (Original) Android Development" thread section. Take anyone of these below, I also link Advanced Stock Kernel if you want complete stock Sony kernel with added init.d / root / recovery add-on / built-in!;
a) Xz-Gaming v1.0
b) XzK-Kernel v11.0
c) Doomkernel v19
d) AdvancedStockkernel
OBS!! Choice latest kernel from list in each thread for getting latest kernel that is optimized and made for your installed FW. Otherwise, problems can occur..
2) Extract boot.img from downloaded ZIP and put boot-file in Flashtool > Firmwares. After this, copy the same zip to your phone external / internal-SD card. Leave it there and continue read..
3) Turn off your phone and hold volume up, then connect phone to USB-cable. Keep an eye on LED notify lamp, see if it blinking blue - then you're connected in fastboot mode between phone and PC!
4) Open up Flashtool and push on the "Bolt-Button". Select fastboot, then go to firmware subfolder in your Flashtool folder on HDD and select extracted boot.img. Read log in flashtool, read it carefully. If everything seems to be normal, disconnect your phone and boot it up.
5) Go into recovery mode by either hammering volume up / volume down button and then choice "Install ZIP" option. Search after your ZIP file in recovery that contains boot.img and wifi-specific modules (critical for getting working WIF / Bluetooth!!).
6) After completed flashing, wipe cache and Dalvik cache (Dalvik can be found under Advanced section in recovery).
7) Reboot and voilá! Enjoy your custom kernel!
I only tried with "AdvancedStockkernel"
After step 4, the display stays black, nothing happent, no boot, no Sony logo, nothing.
I want to mention one more think : when i unlocked the bootloader 2 days ago, i followed this link :
http://unlockbootloader.sonymobile.com/
It was successful.On the next step I was asked to write my email / imei / etc !!! Everything went ok.
After that, i tried to root and something went wrong, so i flashed whole .67 FTF in flashmode, again. Now is stock
Is the bootloader still unlocked, after i flashed .67 ftf in flashmode ? Could that be the reason i can't root the phone ?
Should i try again to unlock the bootloader, before i start again to root ?
Please help me guys.
Thank you
http://forum.xda-developers.com/showthread.php?t=2460745
This would've probably worked without unlocking. It roots most devices with just one click.
Sent from my Xperia Z using XDA Premium 4 mobile app.

bricked my phone while installing custom rom.

Phone Details:
- Xperia Z (T-Mobile) C6606
- Firmware or Build 10.1.1.B.0.166
I was able unbrick my phone and hope the method I used is helpful to others.
****Here's what happened.....******
Got the phone from T-Mobile had a lot of useless apps. Tried to root the phone all kinds of ways. Connected the phone to PC and opened up Flashtool. Flashtool did not detect the phone. I had to go into USB debugging and uncheck it off and check it back on, phone was detected and it says Root Access Allowed.
Installed Dual Recovery.. and installed the rom from zip. Rom instructions as follow:
Requirements: (Click on link below to get them)
1. Root - You probably don't really need this since this ROM itself also include stable and proper root package but most locked bootloader phones require root access to install recovery.
2. CWM/TWRP Recovery support - This is the real requirements. If you can access Recovery to flash this ROM, the rest should be working fine like root/busybox. Sadly you'll need either root or get custom kernel with recovery so you can forget root and be done with.
Instructions did not say install a different firmware, so I am thinking I can use my original firmware since the rom was based on a stock rom.
After installation of custom zip, cleared dalvik cache and reboot the phone. The phone bricked on me. All it did was cycle through the sony xperia boot screen and restart over and over again. I couldn't even get back to recovery(pressing vol. down on reboot) to restore my back up of my previous rom.
*****How I unbricked my phone*****
Remembered back in the day when I was flashing roms for on my previous xperia... I use Sony Companion Suite to restore my phone back to factory. Luckily it worked for my Xperia Z and now I am back with the stock rom.
Link for xperia Z tmobile repair.
sonymobile.com/us/software/phones/xperia-z-tmobile
Link for other phones.
sonymobile.com/us/software/phones/
Hope others find this post helpful.

[Q] will i lose root while upgrading to 12.1.A.1.201 from 12.1.A.0.266?

Hi,
I'm currently running stock 4.3 (12.1.A.0.266). My phone is ROOTED, but have LOCKED BOOTLOADER. I have
My question is simple: will I lose root? Or any apps/data/sms/etc for that matter?
I just don't want to do all the stuff all over again. 12.1.A.0.266 is buggy but still is tolerable. >.>
wakoko79 said:
Hi,
I'm currently running stock 4.3 (12.1.A.0.266). My phone is ROOTED, but have LOCKED BOOTLOADER. I have
My question is simple: will I lose root? Or any apps/data/sms/etc for that matter?
I just don't want to do all the stuff all over again. 12.1.A.0.266 is buggy but still is tolerable. >.>
Click to expand...
Click to collapse
Yes, you'll lose root if you update via OTA or flashing stock.
However, I think OTA does not wipe data, so you'll probably have your data. Do back them up just in case (can't remember since it's been a while since I last update via OTA ).
If you want rooted .201, install either of these roms:
http://forum.xda-developers.com/showthread.php?t=2704312
(v1.1 looks and works like 201)
http://forum.xda-developers.com/showthread.php?t=2658043
(v2 is a much "improved" version of the above)
I have installed the first one and loved it.
A few days ago I installed the second one and loved it even more.
Whatever you do, do a nandroid backup of your .266 (and preferably, add titanium backup of your apps and data/sms/contacts)
my mobile vibrating only after reboot!!!!!
My mobile was a rooted onewith .266 verson and i was trying to put the new rom and screwup!! ias you told i installe i downloaded the new rom v2 and super user,and dual recovery files... i ectracted from sd card all as you tol one by one ...while reboot...i saw sony logo and vibrating freequently only...not opening....!!!!!!!!!!! i tried to reset..same thing.....screwed up?!!!!!
headache59 said:
Yes, you'll lose root if you update via OTA or flashing stock.
However, I think OTA does not wipe data, so you'll probably have your data. Do back them up just in case (can't remember since it's been a while since I last update via OTA ).
If you want rooted .201, install either of these roms:
http://forum.xda-developers.com/showthread.php?t=2704312
(v1.1 looks and works like 201)
http://forum.xda-developers.com/showthread.php?t=2658043
(v2 is a much "improved" version of the above)
I have installed the first one and loved it.
A few days ago I installed the second one and loved it even more.
Whatever you do, do a nandroid backup of your .266 (and preferably, add titanium backup of your apps and data/sms/contacts)
Click to expand...
Click to collapse
Yup - screwed up somewhere in the process but no worries.
The process is almost the same way you got your .266 root.
To get new root and recoveries:
a. Flashtool - choose .257, then follow prompt to hook in your usb cable while pressing the Vol-down button
b. Once complete, close flashtool, unplug your device and reboot device
c. Once loaded and past the minor set up, turn on usb debugging and check "unknown sources" (all under settings)
d. Assuming you have all adb drivers installed (through flashtool installation), hook up your device to the PC and install Doomlord's exploit V18 and recoveries
Install new root 201
Boot into recoveries and flash the said .201 rom+SU+recovery (all zip files) using TWRP. Make sure you wipe cache/dalvik cache/data first. After flashing the zip files, select reboot from TWRP, and let the phone run a bit as it sets itself up (android and sony) during the booting process.
Note:
Ultimate purexsp V2.1 zip is simply an update file (not the full rom) - don't flash this one yet.
Somewhere within the thread you'll find the V2 full rom <663MB in size (as seen in my ext SD card). Flash this one and ignore the other versions
Edit:
Here it is:http://forum.xda-developers.com/showpost.php?p=51733368&postcount=423
stucked on SONY cant open...!!!
Again >> i tried to flash with XperiaSP_C530X_12.0.A.1.257_KernelOnly.ftf file but same thing..after flashing when iam switching on..its stuck on the SONY.... not moving foeward.!!!!!!! give me solution...if its open i can do somthing...
one more can i flash directly with your v2?V2 full rom <663MB or i will flash first with v1 then v2? plz clerify..
headache59 said:
Yup - screwed up somewhere in the process but no worries.
The process is almost the same way you got your .266 root.
To get new root and recoveries:
a. Flashtool - choose .257, then follow prompt to hook in your usb cable while pressing the Vol-down button
b. Once complete, close flashtool, unplug your device and reboot device
c. Once loaded and past the minor set up, turn on usb debugging and check "unknown sources" (all under settings)
d. Assuming you have all adb drivers installed (through flashtool installation), hook up your device to the PC and install Doomlord's exploit V18 and recoveries
Install new root 201
Boot into recoveries and flash the said .201 rom+SU+recovery (all zip files) using TWRP. Make sure you wipe cache/dalvik cache/data first. After flashing the zip files, select reboot from TWRP, and let the phone run a bit as it sets itself up (android and sony) during the booting process.
Note:
Ultimate purexsp V2.1 zip is simply an update file (not the full rom) - don't flash this one yet.
Somewhere within the thread you'll find the V2 full rom <663MB in size (as seen in my ext SD card). Flash this one and ignore the other versions
Edit:
Here it is:http://forum.xda-developers.com/showpost.php?p=51733368&postcount=423
Click to expand...
Click to collapse
Thanks!!! done
Finally its done..!!!!!! i dont know wht i did..finally everythings allright..!!!:victory::victory::victory::victory::victory::victory::highfive::highfive::highfive:
babugd said:
Again >> i tried to flash with XperiaSP_C530X_12.0.A.1.257_KernelOnly.ftf file but same thing..after flashing when iam switching on..its stuck on the SONY.... not moving foeward.!!!!!!! give me solution...if its open i can do somthing...
one more can i flash directly with your v2?V2 full rom <663MB or i will flash first with v1 then v2? plz clerify..
Click to expand...
Click to collapse
Congratz and enjoy the new fantastic rooted rom!

Xperia Z not booting anymore

Hi People,
I'm new here and I do have a problem over, as the title says, my Xperia Z (C6603) won't boot up anymore.
Yesterday I unlocked my bootloader, I also rooted my phone and installed Cyanogenmod 12 afterwards using TWRP, this was working perfect and stable.
Today I found out my phone wasn't rooted at all after I installed Cyanogenmod 12. So I wanted to start over again using this way (http://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873).
So what I've basically done, I installed Xperiaz_10.5.A.0.230_kernel_only.ftf over the CM12 mod, after this my phone doesn't want to boot anymore, getting stuck at the the 'Sony' logo.
Tried to do TWRP -> Factory reset, but it didn't work.
Should I install a full .zip stock rom again instead of the FTF file to restore my old rom?
Kind regards,
xChillz
My root guide and the files provided there are for rooting the 2 stock roms in the thread title only.
You cannot flash a stock kernel onto a custom rom. This is why your device isn't booting.
You can get your device booting in a couple of ways:
1. Extract the boot.img from the Cyanogenmod rom zip and flash it using fastboot. This should allow you to boot into your CM12 rom again.
2. Flash a stock FTF. This will bring your phone back to complete stock. How to package and flash stock roms in FTF format
Sent from my C6603
kingvortex said:
My root guide and the files provided there are for rooting the 2 stock roms in the thread title only.
You cannot flash a stock kernel onto a custom rom. This is why your device isn't booting.
You can get your device booting in a couple of ways:
1. Extract the boot.img from the Cyanogenmod rom zip and flash it using fastboot. This should allow you to boot into your CM12 rom again.
2. Flash a stock FTF. This will bring your phone back to complete stock. How to package and flash stock roms in FTF format
Sent from my C6603
Click to expand...
Click to collapse
Thanks for the quick reply!
Could you tell me where I can get a 10.5.A.0.230 stock FTF or can I just Google it?
xChillz.
Thanks bro,
Installed the 10.5.A.0.230 stock FTF, then I installed CM12 and it works!
xChillz

[Q] my device show black screen only after install IHacker 6.2 rom

I have xperia z1 c6902 with orignial firmware 14.4.A.0.157
after installing the IHacker v6.2 on my device following these instruction
http://forum.xda-developers.com/showthread.php?t=2716182
Install Oficial FTF for Firmware 14.1.G.1.534.
Root Your Phone Using VRoot or KingoApp Root or Whatever You Like.
Backup TA Partition.
Copy the ROM to External SDCard.
Flash the Latest [NUT]'s XZ1Dual Recovery for Xperia Z1 via PC.
Reboot into Recovery (If you already have a working Recovery, Skip the above steps).
Make Sure to do a Wipe Data/Factory Reset before Installing the ROM.
Start the Installation. (Install Zip >> Choose Zip for External SDCard).
Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
Skip to the Last Step if you are already on Firmware - 14.4.A.0.133/108.
Install Kernel.ftf for C6903 (.133) or Kernel.ftf for C6902 (.108) with Flashtool to get compatible Kernel and Baseband.
Reboot and Enjoy.
Click to expand...
Click to collapse
after install zip , the device only show black screen lighted , and give a sound when touch the screen
Sounds like the wrong kernel. I have flashed the kernel from the firmware.ftf
i have flashed .108.ftf kernel
Flash stock rom with. 157 then flash the rom...iHackers 6.2 is based om. 157 firmware...also dont forget to select stock firmware in aroma installer...

Categories

Resources