Database Develop

[Q] My Galaxy mini work on downloading mode only

Can anyone help me, my galaxy mini work only on downloading mode, i can't turn on my phone, i have this problem after using the DD method for unlocking the phone.
i tried with Jtag for boot resurection but it's also the same problem, the phone display samsung when he start and reboot on loop.
thanks for the help.

ChAyOTte said:
Can anyone help me, my galaxy mini work only on downloading mode, i can't turn on my phone, i have this problem after using the DD method for unlocking the phone.
i tried with Jtag for boot resurection but it's also the same problem, the phone display samsung when he start and reboot on loop.
thanks for the help.
Click to expand...
Click to collapse
if ur in download mode..then u can flash stock firmware, even after that it gets stuck??

what do you mean by stock firmware ?
i tried to use odin to flash the phone, but after reboot i have the mase problem.
thanks for your reply

I have the same problem, i tried to flash it with the original firmware, but after reboot the phone doesn't work

ChAyOTte said:
what do you mean by stock firmware ?
i tried to use odin to flash the phone, but after reboot i have the mase problem.
thanks for your reply
Click to expand...
Click to collapse
stock firm= froyo,gb. available on samfirmware.com
ya it's done using odin only....download frm samfirmware n try again

For rooting ...
And once you fix your phone, use the upd_1.zip or tass-recovery-cwm.tar to root the phone.
Please note that if you want to remove the lock put in by the carrier, it is a different game.

tha same problem when i use odin with the original frimware.
i don't know what to do to resolve my problem
the phone start, but i have screen flickers.

1 Which version of odin? (Please give full file name)
2. Which firmware version?
3. Have you chosen the appropriate files in appropriate columns - tass, modem, csc, etc? (Or used the one package option - you cannot use one package option for packages with separate files and otherway around too).
4. Are you using the correct USB drivers on the PC?
5. What exactly do you mean by screen flickering?
Can you post output of the log in ODIN?

Hello,
i am using Odin v4.38
i tried to use multiple frimware like: S5570XXKPF, S5570BGKC3_XECKC2_BGKC1, and the original frimware: S5570XXKB1
i am using the correct usb driver from samsung.
for the sreen flickering, i meam when the phone download all package from Odin and after rebooting, i have screen flickering and the phone don't boot.
this is the log from odin:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/10 Finished.
<1> qcsbl download..
<1> 2/10 Finished.
<1> oemsbl download..
<1> 3/10 Finished.
<1> amss download..
<1> 4/10 Finished.
<1> arm11boot download..
<1> 5/10 Finished.
<1> boot.img download..
<1> 6/10 Finished.
<1> recovery.img download..
<1> 7/10 Finished.
<1> system.rfs download..
<1> 8/10 Finished.
<1> data.rfs download..
<1> 9/10 Finished.
<1> csc.rfs download..
<1> 10/10 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
thanks for your help

Per logs, everything is going right. Unless you messed up the order in files are chosen in odin. (tass.ops, csc, modem, etc).
Can you post a video of the flickering problem? You may have to use another phone, and post the video to youtube.
Also, my question remains - was the phone tied down to any particular carrier?

If you are having boot loop you should wipe data and cache in recovery.
If you are trying to flash gingerbread and don't have a carrier locked phone you can try flashing any gingerbread available at samfirmware.com. They work with any region's phone. If you need details on upgrading visit this:
http://yagyagaire.blogspot.com/2011/08/upgrade-samsung-galaxy-popmini-gts5570.html

description about screen flickering because i don't have another phone to take video: when you put on the galaxy you have displayed in the scren Samsung www.samsungmobile.com and the phone reboot in loop and you have every 3 seconde samsung, and i can't turn off the mobile, for turn off i remove the battery.

i don't have acces to recovery mode, i have only downloading mode.
i tried to install new firmware like Gingerbread, but i have the same problem.

Tried installing CWM recovery and then getting into recovery mode?

yes i tried now, and also the same problem.

Have you tried other key combinations? Like pressing the big button in middle while holding the power button?

Yes i tried and also the same problem.

ChAyOTte said:
Yes i tried and also the same problem.
Click to expand...
Click to collapse
What's your problem by the way... Are you able to see samsung logo or text?? try flashing gingerbread from start. Read this if you have problem...
http://yagyagaire.blogspot.com/2011/08/upgrade-samsung-galaxy-popmini-gts5570.html
And if it is successfull I am sure you'll be able to go to recovery so wipe data and cache there. Otherwise falsh CWM recovery then go toi recoveyr and wipe data and cache...
Remember Home + Power Button = Recovery

the same problem with Gingerbread, i tried 4 version

hi there!
i have same problem . i try to install any rom . on some rom i see big partition size error . i can't power on my phone. does exist any way to format cache or data or any wipe command to clear all data on phone?

[Q] bricked.. only recovery mode

here is my problem.. i rooted my galaxy mini with android 2.2.1.. and i tried to unlock it.. now i can't turn the phone on.. it stuck on flashing samsung boot screen... i can only go to download mode.. i tried to apply new firmware using odin in download mode.. but after it is done, it resets and it's flashing at boot anyway.. is there any way to enable recovery mode or to unbrick my phone in some differrent way...

you can go in the download mod but after flash another rom it reboot ??
what rom you use ?

i flashed it with gingerbread 2.3.3... and after odin is done.. it s not rebooting it is only flashing... it s not trying to reboot... i don t know why.. and then i have to remove battery... then i tried to turn it on and then the samsung logo is flashing again... can someone at least tell me how to hide that phone was rooted and stuff because i will have to take it to the service center..

i guess u would have not done the flashing procedure properly
1.put all files properly in odin
2.put your phone in download mode
3.connect the phone to pc
4.after odin detects the phone flash it

Try flashing again new firmware and be sure your doing it
the right way, theres a lot of instructions on the web on how to, aftr flashing it Shoud print "PASS" when flashing is succesful, then take hes advice install CWM and flash a new rom and that should be fine, its not bricked believe me, your just a little nervous right now kinda paranoid, chill sir.you can do it.

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/10 Finished.
<1> qcsbl download..
<1> 2/10 Finished.
<1> oemsbl download..
<1> 3/10 Finished.
<1> amss download..
<1> 4/10 Finished.
<1> arm11boot download..
<1> 5/10 Finished.
<1> boot.img download..
<1> 6/10 Finished.
<1> recovery.img download..
<1> 7/10 Finished.
<1> system.rfs download..
<1> 8/10 Finished.
<1> data.rfs download..
<1> 9/10 Finished.
<1> csc.rfs download..
<1> 10/10 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
after that it says pass, but my phone is only flashing, nothing on the screen... it s not rebooting at all... i put it in downloading mode, set up odin, then connected and pushed start (been using odin 10 times at least).. so i only can pull the battery out, and then try to start it, but then it is only samsung logo flashing... tried to install clockw recovery 5.0.2.6 with odin by sending one package, same thing, can t access download mode too... i only didin t try custom rom because i don t know anything about it... is there possibillity that the phone battery is too weak? i can t see, and i really don t know is it all beacause of that..

Hey there.. After you flash from odin and it says PASS, does it display the boot animation? If it does, wait for a few minutes. If it's too long, disconnect the phone. Turn it off by pressing the power button until its off or remove the battery. Now, without thr battery, press power button for 30 seconds. Then release, put battery back. Press home+power button only to boot in stock recovery. Use volume keys to navigate to wipe data/ factory reset. Confirm by navigating Yes. Reboot system and hopefully resolves your problem. If not, make sure you have the correct files selected in odin.
Sent from my GT-S5570 using XDA App

hamdocar said:
i flashed it with gingerbread 2.3.3... and after odin is done.. it s not rebooting it is only flashing... it s not trying to reboot... i don t know why.. and then i have to remove battery... then i tried to turn it on and then the samsung logo is flashing again... can someone at least tell me how to hide that phone was rooted and stuff because i will have to take it to the service center..
Click to expand...
Click to collapse
if the phone is not rebooting after flashing then you must have unchecked the auto reboot option in odin
after flashing let the phone flash the package through recovery it is very necessary
and if you want to hide that the phone is rooted or you have done something wrong with the phone then just flash any 'one package' 2.2.1 firmware and phone will not even light up but it can go to download mode or recovery mode so no problem no can see that something have been changed

just reflash it with another new rom.
that didn't called bricked

reflash the rom and WIPE DATA/CACHE USING STOCK RECOVERY NOT CWM RECOVERY

[Help] Urgent help needed from expert

I flashed the cyanmobile revo A from cwm recovery and then wipe the cache partition and reboot my mini but the phone stops at the developers logo..
I waits for the hours but nothing happened..
so I decided to switch back to my stock gingerbread rom and when I tried to flash my stock rom using odin then i got some errors of missing files as follows
---------------------------------------------------
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "amss"
<1> e - unknown file - "ELF


a"
<1> set download environment.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting
-----------------------------------------------------
and I unable to flash my stock rom also
Please help me!! I dont know what to do to overcome this problem...

can you access to recovery?
Sent from my GT-S5570 using xda premium

Yes!!!

please help me

have you make a nandroid backup? if yes wipe everything even dalvik cache and battery stat, restore your nandroid backup and let us know if it work

Try to download other rom, and flash it via cwm.
Sent from my GT-S5570 using Tapatalk 2

ensoy said:
Try to download other rom, and flash it via cwm.
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
You can also do this

I flashed the another rom but still screen stops at android logo
rom name emanoNROM

SOLVED
Problem solved through
==================
| Emergency DLoad Mode|
===================
Successfully installed stock rom...

[Q] [I9001] Sotck Rom & Odin unknown file error

Hi,
I'm trying to install 2.3.6 stock rom in my Galaxy S Plus but Odin always gives me same error.
This is Odin info message trace:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "adsp.mbn"
<1> e - unknown file - ""
<1> set download environment.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
In a few seconds since process start Odin says e - unkown file - "adsp.mbn" error and device restarts with no changes.
I've tested with these three roms and no luck:
- I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5
- I9001XXKQ1_I9001XXKPI_I9001DBTKP1_HOME.tar.md5
- I9001XXKPU_I9001XXKPH_I9001DBTKP1_HOME.tar.md5
I'm from Spain and my device has Orange 2.3.4 firmware.
I don't know if this could be important
Any idea?
Is there any pre-requisite to flash a stock rom, like phone must be rooted or something?
Thanks for your help.
Regards

Try to re-download odin 4.43, AriesVe.ops, ROM (least probable as you tried a few roms already).
Check step-by-step that you're following guide from here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Flashing
Is there any pre-requisite to flash a stock rom, like phone must be rooted or something?
Click to expand...
Click to collapse
No, you just have to get the phone into download mode.

Thanks a lot bro!
Now i successfully updated my phone.
I think i was using an incorrect *.ops file.
Regards,
Juan

[Q] TWRP (os2sd) Recovery loop (HELP Please)

Recently Flashed OS2SD-TWRP 2.8.5.0 . Flashed CyanogenMod 12.1 rom From @cars1189 . After flashin it the wrong way i believe i got a message saying "Encryption Unsucessful" and to reboot . when i rebooted it automatically tried to go into recovery mode and that when it started looping (keeps blinking) at the TWRP screen. i am able to go into download mode but my Computer reconize it as "Unknown USB Device (Device Failed Enumeration)"
Who Knows how to fix this problem?

Download mode drivers work well with xp, vista, and win7. Try this to get synced and for Odin. Follow this reference and you should get stock back.

jfbs said:
Download mode drivers work well with xp, vista, and win7. Try this to get synced and for Odin. Follow this reference and you should get stock back.
Click to expand...
Click to collapse
i installed windows 7 now ... got the drivers to recognize the phone in dowload mode but now wa is happen is Odin is now crashing when ever i try to flash the recovery -.- i get "odin is nor working properly" and now my phone is now saying (Upgrade with Kies)

Have you tried running Odin as admin since you're using win7?

help !!
Recently Flashed OS2SD-TWRP 2.8.5.0 . Flashed CyanogenMod 12.1 rom From @cars1189 . After flashin it the wrong way i believe i got a message saying "Encryption Unsucessful" and to reboot . when i rebooted it automatically tried to go into recovery mode and that when it started looping (keeps blinking) at the TWRP screen. i am able to go into download mode but when i try to flash a recovery via odin it gets stuck at setup connection.
i removed kies, installed samsung usb driver several versions, change usb cables, ports, rebooted.
please help !!

Did you ever figure out a solution? I have the same exact issue.

no more help??? i Flashed my using cwm.6051.t679 + cm-10.2-20140627-UNOFFICIAL-ancora_tmo.zip everything done fine, but when i try to Flashed cm-12.1-20160326-UNOFFICIAL-ancora_tmo.zip i got a message saying "Encryption Unsucessful" and reboot, after reboot i try (New OS2SD-TWRP 2.8.5.0) and Flashed again, reboot then TWRP blue screen never gone! try odin mode:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "preload.img.ext4"
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/4 Finished.
<1> adsp.mbn download..
<1> 2/4 Finished.
<1> boot.img download..
<1> 3/4 Finished.
<1> cache.img.ext4 download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
after rebooting TWRP TWRP TWRP TWRP!!!!!!! again!!
update: i try do again again again again again again again, finally i download another Ancora.ops file, now everything back to normal!!! Ancora.ops file come with uvlg3.odin.zip is WRONG!!
download Ancora.ops from here:
https://docs.google.com/file/d/0B2e_XGOiZowOdTRQYUZjQmVlX3c/view

I had to install Ubuntu on an old hard drive and install the free virtual machine version of windows 7 from Microsoft into virtualbox . Just to get the drivers to work and to be able to flash the device in download mode. Just a tip for getting it into download mode. Plug in the usb cable, get the charge screen up and power it on, and then hold down the volume button. Keep doing this and eventually it will jump into download mode. Once you do that follower other peoples instructions for Odin here. This is what I had to do because I was using Windows 10 but you can completely legally and for free setup a virtual box of windows 7 in Ubuntu to fix stuff like this. It took me a week to find that out.
So my Exhibit is now working like brand new. I just think I should learn how to swap the external drive for the internal because the storage capacity is very small.