[Q] Flashing pre and post camera - Moto X Q&A

Well I have had a problem that I can't get to kitkat using the OTA because I have a modified system with root. I also can't flash back to stock because the only stock image that is available is from before the camera update, so if I flash it I will brick my cellphone. From what I understand this doesn't leave me with any options at the moment. I am on Claro Chile(139.12.35.ghost_row.AmericaMovil.en.CL) currently but the only firmware available is 139.7.26.ghost_row.AmericaMovil.en.CL which is pre camera...
I wanted to be clear on what things would brick my phone for sure, that way I don't do them. First of all is it the bootloader or the system image that causes it to brick? If it's the bootloader, would I be able to just flash the system image by itself then do the OTA to get me to kitkat? Or is the camera file that is in the system image the problem? If so is it possible to modify the system image to update just the camera file then flash it then do the update to kitkat? Am I able to flash another rom from another carrier such as "Claro Brazil" or "Claro Puerto Rico" since they have the same system version as my phone(139.12.35.ghost_row.America.Movil.en)? Or would that brick it?
Or if any android or moto x gurus have any other ideas on how I can get to kitkat I am open to suggestions and ideas.

AGISCI said:
I wanted to be clear on what things would brick my phone for sure, that way I don't do them. First of all is it the bootloader or the system image that causes it to brick?
Click to expand...
Click to collapse
There is a poster who created an unofficial fxz for verizon 4.4.2 from another poster's stock phone running 4.4.2. You might want to ask him how he did it and if you know someone who has a stock 4.4.2 claro chile you may be able to do it. Here is the thread:
http://forum.xda-developers.com/moto-x/development/xt1060-164-55-2-unofficial-fxz-unlocked-t2659682
Once the official sbf firmware came out he edited his OP to remove his unofficial fxz. I don't know how he does it, but he may be able to tell you how. That would get you to 4.4.2.

Related

[Q]Unlocked Bootloader,TWRP and 4.4.2 Update

Guys,i have Retail 1058 Moto X with unlocked Bootloader,TWRP(latest and rooted) and i want to upgrade to 4.4.2!
Some guys already received the 4.4.2 brazilian update via OTA,and extracted the zip file,but,since im on custom recovery,the OTA doesnt reboot the phone into stock and go straight to TWRP,therefore,doesnt conclude the update,and keep restarting!
Since i need the phone,i did a factory reset via TWRP just to get things going!
But,i want to upgrade to 4.4.2!
Is there a way to do that?remove TWRP ou something else?
I've seen some people saying that i need to flash the 4.4 img which it is inside the zip but,i dont have that zip anymore!
Thx in advance!
msespindola said:
Guys,i have Retail 1058 Moto X with unlocked Bootloader,TWRP(latest and rooted) and i want to upgrade to 4.4.2!
Some guys already received the 4.4.2 brazilian update via OTA,and extracted the zip file,but,since im on custom recovery,the OTA doesnt reboot the phone into stock and go straight to TWRP,therefore,doesnt conclude the update,and keep restarting!
Since i need the phone,i did a factory reset via TWRP just to get things going!
But,i want to upgrade to 4.4.2!
Is there a way to do that?remove TWRP ou something else?
I've seen some people saying that i need to flash the 4.4 img which it is inside the zip but,i dont have that zip anymore!
Thx in advance!
Click to expand...
Click to collapse
if you take the 4.4.2 update you will loose root and wont be able to get it back till who knows when.
but you need to flash your phone back to 100% stock just like you did when root your device but instead of using the 4.2.2 CU firmware use the 4.4
here is all the firmware for the Moto X
http://sbf.droid-developers.org/phone.php?device=0
your device is a Att model so you should be able to flash the ATT 4.4 firmware but im not 100% sure but maybe you will find your carrier listed there.
dray_jr said:
if you take the 4.4.2 update you will loose root and wont be able to get it back till who knows when.
but you need to flash your phone back to 100% stock just like you did when root your device but instead of using the 4.2.2 CU firmware use the 4.4
here is all the firmware for the Moto X
http://sbf.droid-developers.org/phone.php?device=0
your device is a Att model so you should be able to flash the ATT 4.4 firmware but im not 100% sure but maybe you will find your carrier listed there.
Click to expand...
Click to collapse
yeah,i know,aware of loosing root,but,mine is retail,and i've found the brazilian retail one(Blur_Version.143.44.8.ghost_row.Brasil.en.BR)!
How do i revert back to stock?never done that before!
Thx for the help so far buddy
msespindola said:
yeah,i know,aware of loosing root,but,mine is retail,and i've found the brazilian retail one(Blur_Version.143.44.8.ghost_row.Brasil.en.BR)!
How do i revert back to stock?never done that before!
Thx for the help so far buddy
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2446515
there are two ways in this guide i like the manual way. but your choice make sure you read everything because if you do this wrong you can brick.
dray_jr said:
http://forum.xda-developers.com/showthread.php?t=2446515
there are two ways in this guide i like the manual way. but your choice make sure you read everything because if you do this wrong you can brick.
Click to expand...
Click to collapse
Okay buddy,will take a look when i get home from work!
One questiona buddy managed to get the fastboot img for me,if i just flash the stock recovery img and then try to update will it work?
msespindola said:
Okay buddy,will take a look when i get home from work!
One questiona buddy managed to get the fastboot img for me,if i just flash the stock recovery img and then try to update will it work?
Click to expand...
Click to collapse
idk i dont like to doing things half way there have been way to many bricks lately.
If he has an unlocked bootloader, why would he not be able to get root back?
I thought when the bootloader was unlocked you had free reign over the device. Shouldn't he be able to upgrade to 4.4.2 and use SU and TWRP to get root back? I don't get why he wouldn't be able to do that.
Flash 4.4.2
Flash TWRP via mfastboot
Install SU zip via TWRP
Boot
Install SU app
What am I missing?
Sent from my Dev Edition Moto X
Schaweet said:
If he has an unlocked bootloader, why would he not be able to get root back?
I thought when the bootloader was unlocked you had free reign over the device. Shouldn't he be able to upgrade to 4.4.2 and use SU and TWRP to get root back? I don't get why he wouldn't be able to do that.
Flash 4.4.2
Flash TWRP via mfastboot
Install SU zip via TWRP
Boot
Install SU app
What am I missing?
Sent from my Dev Edition Moto X
Click to expand...
Click to collapse
this is why i dont read on my phone i miss crap anyway if you flash 4.4.2 yes you can flash the 4.4 TWRP and then SuperSU with a unlocked bootloader.. sorry for my miss read thanks for the catch
dray_jr said:
idk i dont like to doing things half way there have been way to many bricks lately.
Click to expand...
Click to collapse
Schaweet said:
If he has an unlocked bootloader, why would he not be able to get root back?
I thought when the bootloader was unlocked you had free reign over the device. Shouldn't he be able to upgrade to 4.4.2 and use SU and TWRP to get root back? I don't get why he wouldn't be able to do that.
Flash 4.4.2
Flash TWRP via mfastboot
Install SU zip via TWRP
Boot
Install SU app
What am I missing?
Sent from my Dev Edition Moto X
Click to expand...
Click to collapse
Thx guys, I'll do this later, thx for the awesome responses
Sent from my XT1058 using xda app-developers app
dray_jr said:
idk i dont like to doing things half way there have been way to many bricks lately.
Click to expand...
Click to collapse
Can someone else please chime in on this? I have a Dev Edition VZW Moto X, and when the 4.4.2 update is finally available, I want to know what to do. My phone is unlocked & rooted with TWRP installed. Can I just flash the factory recovery and then take the OTA? Or do I have to revert to 100% stock? If I only flash stock recovery and take the OTA, data won't be wiped, will it? That is the big reason I would like to avoid going back to 100% stock if I can.
NPOA556 said:
Can someone else please chime in on this? I have a Dev Edition VZW Moto X, and when the 4.4.2 update is finally available, I want to know what to do. My phone is unlocked & rooted with TWRP installed. Can I just flash the factory recovery and then take the OTA? Or do I have to revert to 100% stock? If I only flash stock recovery and take the OTA, data won't be wiped, will it? That is the big reason I would like to avoid going back to 100% stock if I can.
Click to expand...
Click to collapse
My hope is that someone on here will repackage the OTA for us to sideload. That would be the best case scenario.
If not, I think you just need a stock recovery, but I could be wrong. I've seen someone say you need to flash stock system as well. I have the same questions as you if we don't get a side loadable zip.
Sent from my Dev Edition Moto X
Schaweet said:
My hope is that someone on here will repackage the OTA for us to sideload. That would be the best case scenario.
If not, I think you just need a stock recovery, but I could be wrong. I've seen someone say you need to flash stock system as well. I have the same questions as you if we don't get a side loadable zip.
Click to expand...
Click to collapse
It's not the end of the world if I have to wipe data and restore everything from TiBu, but it's still a PITA I would like to avoid if possible. More importantly, I don't want to run into any issues when installed the update. So if there is any question as to whether stock recovery alone is sufficient for the update to install properly, I will probably go back to full stock to be safe. I guess I have some time to let smarter people figure it out, since there is no update for VZW yet.
NPOA556 said:
It's not the end of the world if I have to wipe data and restore everything from TiBu, but it's still a PITA I would like to avoid if possible. More importantly, I don't want to run into any issues when installed the update. So if there is any question as to whether stock recovery alone is sufficient for the update to install properly, I will probably go back to full stock to be safe. I guess I have some time to let smarter people figure it out, since there is no update for VZW yet.
Click to expand...
Click to collapse
What I've read is you need to go back to stock recovery and also make sure any /system files are unchanged. For example I renamed my old exchange apk's (in /system/app) when I put in the new ones from the nexus 5 on 4.4.2, so I would need to name those files back.
NPOA556 said:
It's not the end of the world if I have to wipe data and restore everything from TiBu, but it's still a PITA I would like to avoid if possible. More importantly, I don't want to run into any issues when installed the update. So if there is any question as to whether stock recovery alone is sufficient for the update to install properly, I will probably go back to full stock to be safe. I guess I have some time to let smarter people figure it out, since there is no update for VZW yet.
Click to expand...
Click to collapse
I'm sure some nice developer will help us along.
What have you done to take you off of stock?
I just have custom recovery and xposed. Xposed shouldn't cause any issues.
Sent from my Dev Edition Moto X
Schaweet said:
I'm sure some nice developer will help us along.
What have you done to take you off of stock?
I just have custom recovery and xposed. Xposed shouldn't cause any issues.
Click to expand...
Click to collapse
I guess nothing, other than TWRP, Xposed, and obviously root. I have seen several people say that you have to unroot before installed an OTA, but I don't know if that applies to the Dev X or just the standard version. A lot of people seem to indicate that you have to go back to stock, so I just want to clarify what is really required.
NPOA556 said:
I guess nothing, other than TWRP, Xposed, and obviously root. I have seen several people say that you have to unroot before installed an OTA, but I don't know if that applies to the Dev X or just the standard version. A lot of people seem to indicate that you have to go back to stock, so I just want to clarify what is really required.
Click to expand...
Click to collapse
Good questions. I'm not sure. We certainly root differently than a non Dev edition. They might have some files modified that we don't have to modify. Also, I wonder is going to stock recovery will unroot us.
I guess we wait and stay patient.
Sent from my Dev Edition Moto X
Surely there must be a way to flash updates through TWRP?
I want to grab one of these
http://sbf.droid-developers.org/phone.php?device=0
and flash it through TWRP. Anyone know if this is possible?
Wouldn't mind 4.4.2 right now on my dev ed, to see if my bluetooth problem gets fixed.
Unfortunately you can not take the ota if
1- you have custom recovery
2- root
3- changed any system file
It will bootloop
Clearing data is always required after any ota
The only hope you have is if someone decides to take that factory image and runnit through kitchen to make it a flashable zip. You will also need the updated modem from either 4.4 or 4.4.2 to prevent system settings from fc ing
This goes for any moto, retail and or developer edition
You may also attempt to flash the sbf firmware and remove the delete userdata from the XML but no guarantee that you will not have issues
Hope that helps
Sent on my Gummy running Lenoto X
To take an ota you must be stock. Meaning everything. As long as you haven't flashed an updated bootloader you can just flash system.IMG and recovery.IMG from the sbf your phone is currently on you can take an ota. A successful ota does NOT require a data wipe.
---------- Post added at 04:08 PM ---------- Previous post was at 04:04 PM ----------
finalarcadia said:
Surely there must be a way to flash updates through TWRP?
I want to grab one of these
http://sbf.droid-developers.org/phone.php?device=0
and flash it through TWRP. Anyone know if this is possible?
Wouldn't mind 4.4.2 right now on my dev ed, to see if my bluetooth problem gets fixed.
Click to expand...
Click to collapse
You cannot flash any of those through twrp! If you want to flash 4.4.2 you need to fastboot the system.IMG and boot.IMG and you will need to wipe your data. If you choose this route you will not be able to take the ota when its available you'd have to wait for the sbf file to be released and update through house of moto, rsd, or fastboot.
flashallthetime said:
Unfortunately you can not take the ota if
1- you have custom recovery
2- root
3- changed any system file
It will bootloop
Clearing data is always required after any ota
...
Click to expand...
Click to collapse
some questions.. and comments...
I agree with #1. You must have STOCK recovery for an OTA to install properly. And #3, because the OTA generally has a file list with check sums to compare against what is on your device to make sure all required files are there and the correct version/size/etc before it will start to install.
#2 I have a question on as I've not had an issue with this unless the root process makes changes to system files (thus causing a problem for #3). I've lost root taking an OTA, but that is it.
Then again, I have a Dev X with unlocked bootloader, and I don't know enough about RockMyMoto, SlapMyMoto, etc was of rooting the X, except that initially they replaced the recovery partition with an image that when selected/booted allowed write to system, etc. This would cause issue with #1 (no longer have stock recovery on the recovery partition), but not sure what, if any system files get touched or altered from stock.
Finally, you mention clearing data being required... This would wipe you back to factory defaults and remove your apps/data. I don't believe its "required" but rather just suggested as it can make the device run smoother after the update is done.
---------- Post added at 05:01 PM ---------- Previous post was at 04:59 PM ----------
msespindola said:
Guys,i have Retail 1058 Moto X with unlocked Bootloader,TWRP(latest and rooted) and i want to upgrade to 4.4.2!
Some guys already received the 4.4.2 brazilian update via OTA,and extracted the zip file,but,since im on custom recovery,the OTA doesnt reboot the phone into stock and go straight to TWRP,therefore,doesnt conclude the update,and keep restarting!
Since i need the phone,i did a factory reset via TWRP just to get things going!
But,i want to upgrade to 4.4.2!
Is there a way to do that?remove TWRP ou something else?
I've seen some people saying that i need to flash the 4.4 img which it is inside the zip but,i dont have that zip anymore!
Thx in advance!
Click to expand...
Click to collapse
Depends on how you rooted.
If you've downloaded the SBF file for the ROM on your device (if you don't have it, see if its available from -> http://sbf.droid-developers.org/phone.php?device=0 ), you can unzip it, and fastboot flash the stock recovery from it onto your device, take the OTA, and then later fastboot flash TWRP back on and install SuperSU again to root.
This assumes you did NOT touch any system files the update will check for prior to running/installing. If you did touch system files, edit build prop, removed/renamed any APK's... then fastboot flash recovery and system before taking the OTA

[Q] Stock Rom for XT1060

I have dug around a bit and I can't seem to find a TWRP flashable stock rom for the VZW XT1060. Now that I'm liberated (BL unlocked), I am hoping to have a quick and easy way to recover when I **** up my phone. Can I use stock roms for other Moto X variants or should I just be patient and wait for someone to come out with this?
Just make a backup before you start playing, and you're all set.
If you **** up your phone, use the SBF files and flash them manually.
nhizzat said:
If you **** up your phone, use the SBF files and flash them manually.
Click to expand...
Click to collapse
yea.. thats always the fallback.. but flashing stock rom via twrp or cwm so much faster and able to regain root quickly
grimez said:
I have dug around a bit and I can't seem to find a TWRP flashable stock rom for the VZW XT1060. Now that I'm liberated (BL unlocked), I am hoping to have a quick and easy way to recover when I **** up my phone. Can I use stock roms for other Moto X variants or should I just be patient and wait for someone to come out with this?
Click to expand...
Click to collapse
There is no version of the Stock rom that is flashable via TWRP or CWM.
SBF file is out but you must flash via RSDLite, or manually flash via mfastboot. The only "flashable" via recovery "option" out there would be the OTA UPDATE which is not a full rom, and it isn't flashable via TWRP or CWM either.
I don't expect anyone to come out with anything flashable via TWRP/CWM for the stock rom.
It is not recommended to flash X Roms for other variants like the XT1058/XT1053/etc on the Verizon X XT1060 due to radio, and other components.
Flash with RSD or OTA?
Hi all, am hoping soomeone my know this as I have not come across a detail answer for it yet...I have DE still on the original 4.2.2 pre camera. Is there a best way to upgrade to kit kat , either 4.4 or 4.4.2 and be able to have the most "options" left (ie: I wont be able to re-root or intstal Phils recovery) for my device . Any insight would be apreciated. Thanks.
kerryh420 said:
Hi all, am hoping soomeone my know this as I have not come across a detail answer for it yet...I have DE still on the original 4.2.2 pre camera. Is there a best way to upgrade to kit kat , either 4.4 or 4.4.2 and be able to have the most "options" left (ie: I wont be able to re-root or intstal Phils recovery) for my device . Any insight would be apreciated. Thanks.
Click to expand...
Click to collapse
If you have a DE, you can unlock the bootloader (without voiding warranty) at any time, and install a custom recovery to root.
As far as upgrade path, it depends on if you are stock, or how close to stock if you have modified it. If stock, just take the OTA's, one at a time, to keep your settings, data, apps.
The OTA Update files have a manifest in them containing a list of files, and check sums for those files, which it needs on your phone. If files it wants to be there are missing from your phone or do not match the check sum in the manifest, the OTA will fail (which is why I say depends on if you are stock). If you've removed or replaced any files, you'll need to put them back. You'll also need stock recovery for any OTA to install.
An "easy" way to update is to download the SBF file for the version you want on your phone from -> http://sbf.droid-developers.org/phone.php?device=0 unzip it. Edit the XML file and, if it exists, remove the line for erase partition userdata. Then flash using RSDLite.
With the unlocked bootloader, you can then flash TWRP, CWM or other custom recovery and install SuperSU to root if needed.
grimez said:
I have dug around a bit and I can't seem to find a TWRP flashable stock rom for the VZW XT1060. Now that I'm liberated (BL unlocked), I am hoping to have a quick and easy way to recover when I **** up my phone. Can I use stock roms for other Moto X variants or should I just be patient and wait for someone to come out with this?
Click to expand...
Click to collapse
Recently saw both stock odexed and stock deodexed rooted 4.2.2 for unlocked VZW XT1060 posted over on DroidRzr.com
KidJoe said:
There is no version of the Stock rom that is flashable via TWRP or CWM.
Click to expand...
Click to collapse
For the Verizon XT1060 there is now -> http://forum.xda-developers.com/moto-x/development/rom-stock-vzw-4-4-2-developer-editions-t2693591

[Q] Return 4.4.3 to stock. Flash 4.4.2 or 4.4.4 system and recovery?

I just bought my son a used Moto X (2013). He's already set it up and installed his apps. When he accepted an OTA update (4.4.3 to 4.4.4) it failed and we discovered that TRWP recovery was installed. He would like to revert to a stock recovery so that he can accept Lollipop OTA when available.
I can easily install 4.4.4 with the images and instructions from Motorola but this would cause him extra work as he would have to set up the phone again.
I assume I can just flash the stock system and recovery image but Motorola only offers the images for 4.4.2 and 4.4.4 not the 4.4.3 that he has installed.
Would it be safe to install one of those? Which one? Would that preserve the apps he's already installed?
Thanks in advance.
Edit: FWIW Phone is an XT1053 Developer Edition
You would want to flash the 4.4.4 factory images. Just don't downgrade android versions or you will brick.
Travisdroidx2,
I'll flash 4.4.4 then. Do you think it would be safe to flash only the system and recovery files? I wonder if that would cause issues or possibly brick it when Lollipop OTA becomes available. If it sounds even a little risky I'll just flash all the 4.4.4 files per Motorola's guidance and let my son re-setup the phone.
Thanks for your help.
mikeck said:
Travisdroidx2,
I'll flash 4.4.4 then. Do you think it would be safe to flash only the system and recovery files? I wonder if that would cause issues or possibly brick it when Lollipop OTA becomes available. If it sounds even a little risky I'll just flash all the 4.4.4 files per Motorola's guidance and let my son re-setup the phone.
Thanks for your help.
Click to expand...
Click to collapse
If you flash all of the 4.4.4 and don't change system files or recovery you will be on the upgrade path for the ota. The brick happens when the moto boot.img and gpt.bin images get downgraded. Then people end up with mismatched partions and brick on a ota. If you flash all of 4.4.4 and leave it as is you will be fine to take the update. Then if you want to root after just flash twrp and root. But flashing the 4.4.4 sbf will get you on the upgrade path again.
Does anyone have the factory images? I tried to download from Motorola but it says download failed everything
Devans32 said:
Does anyone have the factory images? I tried to download from Motorola but it says download failed everything
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347
I just flashed the Motorola 4.4.4 image, everything appears to be fine. The only problem I encountered was that an XML file should have been included in the Motorola download with specific flashing instructions for my device. My download was missing this so I downloaded the 4.4.2 image and found the XML there. It differs slightly from the flashing instructions on the Motorola images download page.
Thanks for the help, I've attached the XML file.

[Q] Help downgrade to offical verizon dev from lollipop

Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
there is a high risk of bricking your device while downgrading http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202
It's highly risky to downgrade but if you persist just make sure your bootloader and partition table is not the one that got upgtaded with the latest 5.1 rom. If it is the latest then don't do it.
Sent from my Moto X using Tapatalk
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
ong14 said:
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
Click to expand...
Click to collapse
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
md07 said:
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
Click to expand...
Click to collapse
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
ong14 said:
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
Click to expand...
Click to collapse
Do you use fastening to flash fw? And you flash all part inside fw? Include motorboat and got... ? After flash, do you make unlock network again ?
I used mfastboot to flash all CGs to my phone. But you may try to skip some CGs like KidJoe said.
Every time when you return to stock or do a hard reset, you have to do the SIM-unlock process again.
harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
KidJoe said:
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
Click to expand...
Click to collapse
Yea i think i will wait for the full sbf 5.1 for verizon, i dont want to take the chance.
Thank you all for your help when the 5.1 update will come to the verizon you think?

moto x 1st gen 4.2.2 Upgrade to 5.1

Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Question:
To upgrade to 5.1 do I just need to revert back to stock boot loader and do an OTA update?
Will the OTA re-lock my boot loader?
After the upgrade to 5.1 do I just reload TWRP recovery and flash SU for root access again?
No the new updates do not relock the bootloader. I suggest you first try out the Lollipop by flashing it through latest version of TWRP. If you think you can live with it than just flash complete stock through rsdlite or manually by fastboot. Reason I say that is because once you take the OTA it will update both bootloader version and the partition tables which means you won't be able to revert back to a lower Android version without the risk of bricking your device.
Sent from my Moto X
bushako said:
No the new updates do not relock the bootloader. I suggest you first try out the Lollipop by flashing it through latest version of TWRP. If you think you can live with it than just flash complete stock through rsdlite or manually by fastboot. Reason I say that is because once you take the OTA it will update both bootloader version and the partition tables which means you won't be able to revert back to a lower Android version without the risk of bricking your device.
Sent from my Moto X
Click to expand...
Click to collapse
I don't want to go back to complete stock, I want to keep bootloader unlocked and root. Is there a stock rooted rom out there I can flash w/ TWRP without having to do OTA or flashing the recovery back to stock?
Yes there is its in the development section. You'll read the thread something like xt1053 stock flash-able. It contains only the kernel and system files so you should be good.
Here http://forum.xda-developers.com/showthread.php?t=3155843
Sent from my Moto X
-RanZ- said:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Question:
To upgrade to 5.1 do I just need to revert back to stock boot loader and do an OTA update?
Will the OTA re-lock my boot loader?
After the upgrade to 5.1 do I just reload TWRP recovery and flash SU for root access again?
Click to expand...
Click to collapse
First off, there is no Verizon 5.1 yet. So any 5.1 you try will be for a different model, and if you flash a full rom, it will have different radios (which don't work for CDMA that Verizon still uses for voice/3g data. If you keep your stock VZW radio files, keep in mind they will be on a different version than the rest of the rom which could cause some inconsistencies and issues. IF you do flash a FULL SBF, you will be stuck with no SAFE way to revert to 4.4.4 due to GPT.BIN/Motoboot.img (for more on this, see the link in my signature), and you'll have to wait for the Verizon 5.1 SBF to get back to Verizon's rom.
Next, to install an OTA update, when it becomes available, you need STOCK RECOVERY on your phone. The OTA also does a pre-flash check/validation of your phone before it flashes, so if anything it looks for is not what it expects, the OTA will fail. Because of that you need to be 100% stock, or very near to it.
Finally, NO, an OTA will not relock your bootloader, nor will flashing an SBF.
For more on taking an OTA, see the link in my signature on OTA Updates..
That being said, if you TRY a 5.1 rom that is out there for another model you best bet is to find one that is a TWRP back up of 5.1 installed on someone's phone, since it only updates system.img and boot.img. It may not work 100% (because part of your phone will still have the 4.4.4 files), but it will give you a taste and you could later revert back to the stock 4.4.4 which you currently have on your phone. IF you flash a FULL SBF, you might be stuck with no way to revert to 4.4.4 due to GPT.BIN/Motoboot.img (for more on this, see the link in my signature)
Hi Bushako, I've Moto X Verizon XT1060 and it's struck in 4.2.2 android. When I try to update using setting, about phone and system update it show there is no update available but the android version on it is 4.2.2
5.1 is available for Verizon Moto X 1st gen now isn't it? I am googling for a detailed process on how to update from 4.2.2 to 5.1 and keeping root but not having any luck finding anything. Is it easy to update from 4.2.2 stock rooted to 5.1? The specs of my phone are the same as the original post:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
-RanZ- said:
5.1 is available for Verizon Moto X 1st gen now isn't it? I am googling for a detailed process on how to update from 4.2.2 to 5.1 and keeping root but not having any luck finding anything. Is it easy to update from 4.2.2 stock rooted to 5.1? The specs of my phone are the same as the original post:
Verizon
Moto X 1st Gen
Android 4.2.2 - Stock rooted
Unlocked Boot loader - not DEV edition though
TWRP 2.7.1.1 recovery
Click to expand...
Click to collapse
Aug 1, when I last posted in this thread, Verizon 5.1 wasn't available. It is now.
As for updating and keeping root, there are a few ways to do it. Since you say your Bootloader is unlocked, the best way is flash 5.1 SBF, and use the process of flashing TWRP and SuperSU to root and have Write protection Disabled (see -> http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217 ). If you're bootloader isn't unlocked yet, and if you are on 4.4.2 or lower and have NEVER upgraded to 4.4.4 or 5.1, use Sunshine to unlock the bootloader FIRST
If you're bootloader isn't unlocked, there is only one way to root 5.1, but it doesn't disable write protection, and its risky because it intentionally soft bricks the phone back to the Qualcomm HS-USB QDLoader mode.
KidJoe said:
Aug 1, when I last posted in this thread, Verizon 5.1 wasn't available. It is now.
As for updating and keeping root, there are a few ways to do it. Since you say your Bootloader is unlocked, the best way is flash 5.1 SBF, and use the process of flashing TWRP and SuperSU to root and have Write protection Disabled (see -> http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217 ). If you're bootloader isn't unlocked yet, and if you are on 4.4.2 or lower and have NEVER upgraded to 4.4.4 or 5.1, use Sunshine to unlock the bootloader FIRST
If you're bootloader isn't unlocked, there is only one way to root 5.1, but it doesn't disable write protection, and its risky because it intentionally soft bricks the phone back to the Qualcomm HS-USB QDLoader mode.
Click to expand...
Click to collapse
Bootloader is unlocked, I get the warning every time I restart the phone.
Where can I find the SBF files? Every post I find from a search the links do not work.
Are the SBF files stock or from someone else's phone?
Do I flash the files with my currently installed TWRP?
When I flash the SBF does it remove TWRP so I have to re flash it?
Are there any radio upgrades/do they get done w/ the SBF?
Sorry if these are basic questions, I have not done much phone rooting since my old HTC Incredible.
-RanZ- said:
Bootloader is unlocked, I get the warning every time I restart the phone.
Where can I find the SBF files? Every post I find from a search the links do not work.
Are the SBF files stock or from someone else's phone?
Do I flash the files with my currently installed TWRP?
When I flash the SBF does it remove TWRP so I have to re flash it?
Are there any radio upgrades/do they get done w/ the SBF?
Sorry if these are basic questions, I have not done much phone rooting since my old HTC Incredible.
Click to expand...
Click to collapse
There is a link in my signature to a thread containing the known places that were hosting the SBF/FXZ files. That is the only place I can suggest you look.
SBF/FXZ files I'm taking about are stock, and digitally signed by Motorola. They can be flashed on phones with locked or unlocked bootloaders. NOTE: make sure you get the SBF for your device model and carrier!!
You flash these via Mfastboot or RSDLite. When using these tools you are flashing back to stock. After you get the SBF file, see -> http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 and read the REQUIREMENTS section, and pick either Option 3, 4 or 5 to actually flash (only use one option. which ever you find the easiest. Do NOT use Option 1 or 2 as they would not apply to your situation). I usually recommend option 5.
Yes, the process of flashing the entire SBF will overwrite TWRP with stock recovery. You'll need to flash it later as part of the rooting process.
Yes there are radio updates in the newer SBF files.
So basically, you flash to stock 5.1 by using the SBF files (following the requirements and ONE of the options in http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 again,I usually recommend option 5), then root by following http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217
One other tip... Make a back up of your phone BEFORE YOU FLASH. copy all data from the /sdcard area to your PC, make a list of all your apps, etc. And seriously consider erasing your UserData while flashing (wipes the phone clear), or doing a factory reset before you flash.
I only say this because 5.1 seems more stable (and less buggy) if a factory reset is done before/during the upgrade process.
EDIT: The 5.1 SBF file you want for a Verizon XT1060 is GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip and is available from -> http://motofirmware.center/files/category/11-moto-x-1st-generation/
KidJoe said:
There is a link in my signature to a thread containing the known places that were hosting the SBF/FXZ files. That is the only place I can suggest you look.
SBF/FXZ files I'm taking about are stock, and digitally signed by Motorola. They can be flashed on phones with locked or unlocked bootloaders. NOTE: make sure you get the SBF for your device model and carrier!!
You flash these via Mfastboot or RSDLite. When using these tools you are flashing back to stock. After you get the SBF file, see -> http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 and read the REQUIREMENTS section, and pick either Option 3, 4 or 5 to actually flash (only use one option. which ever you find the easiest. Do NOT use Option 1 or 2 as they would not apply to your situation). I usually recommend option 5.
Yes, the process of flashing the entire SBF will overwrite TWRP with stock recovery. You'll need to flash it later as part of the rooting process.
Yes there are radio updates in the newer SBF files.
So basically, you flash to stock 5.1 by using the SBF files (following the requirements and ONE of the options in http://forum.xda-developers.com/showpost.php?p=61142892&postcount=2 again,I usually recommend option 5), then root by following http://forum.xda-developers.com/moto-x/general/how-to-how-to-root-5-1-unlocked-t3140217
One other tip... Make a back up of your phone BEFORE YOU FLASH. copy all data from the /sdcard area to your PC, make a list of all your apps, etc. And seriously consider erasing your UserData while flashing (wipes the phone clear), or doing a factory reset before you flash.
I only say this because 5.1 seems more stable (and less buggy) if a factory reset is done before/during the upgrade process.
EDIT: The 5.1 SBF file you want for a Verizon XT1060 is GHOST_VERIZON_5.1_LPA23.12-39.7_cid2_CFC.xml.zip and is available from -> http://motofirmware.center/files/category/11-moto-x-1st-generation/
Click to expand...
Click to collapse
I will give this a try if I can locate the correct SBF files, your information has helped greatly, Thanks!
nevermind, google fixed me.

Categories

Resources