Related
i formated my usb storage and my sd card and now my phone doesnt turn on its stuck at the samsung logo screen....recovery and download mode works...i flashed classic rom v6 via odin...the flash goes fine but the phone is stuck at the samsung logo....when i open recovery it says e: failed to mount exfat /dev/block/mmcblkpl /sd card....the big problem is that if it has anything to do with hardware failure i dont have where to fix it because there are not any samsung service centers in my country
I JUST PUT MY EXTERNAL SD CARD IN AN IT DOES NOT GIVE ME THE SD CARD MESSAGE BUT THE PHONE IS STILL STUCK...
Go into recovery, wipe cache and dalvik.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Go into recovery, wipe cache and dalvik.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
it didnt work...when i try to reboot system it freezes in recovery.....has this any thing to do with the mounts and storage....how should they be???
every time i try to mount or unmount or format system the recovery freezes
even trying to flash a rom via recovery doesnt work it just freezes before starting....
samkle said:
every time i try to mount or unmount or format system the recovery freezes
even trying to flash a rom via recovery doesnt work it just freezes before starting....
Click to expand...
Click to collapse
What rom were you on when you flashed the current one?
Sent from my GT-N7000 using xda premium
Try flashing a GB rom using odin. Boot into recovery and do a factory reset and check what happens.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Try flashing a GB rom using odin. Boot into recovery and do a factory reset and check what happens.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
wich is better using a pit file or without a pit file....and if it is best with pit file is this the right one to flash Q1-20110914_16GB and im downloading this rom by the way...N7000XXLC1_XALC1_XXLB2_ROOT_DEODEX
i just flashed a gb rom with pit file and it worked...i gues thats what i should have done the first place but i just panicked...
SpyderTracks said:
What rom were you on when you flashed the current one?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
angry v3
samkle said:
angry v3
Click to expand...
Click to collapse
Glad you got it sorted, in future never use a pit unless you're facing certain brick scenarios, it can cause more damage than good, you rarely need them.
Happy new year to all btw
Sent from my GT-N7000 using xda premium
Here's the problem can anyone help me upon this.
I was using Cynogen Nightly 9.1 version then I saw [ROM][JB][4.2.1][18/01/13] CyanAOSP v0.5.2 [Stable | For Gaming] seems amazing so then I downloaded and installed successfully. Everything seemed okay but as the ROM started it was giving me a constant error which was like "Wizard stopped working" I was totally unable to get my hands on this rom.
So I then updated my rom again to cyanogen 10.1 Nightly.
my question is should install it now will it work fine?
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
I think something went wrong when you installed the first time.
Follow this steps and it should work:
1. Backup your data
2. Enter recovery
3. Wipe data/factory reset
2. Wipe Cache
3. Wipe Dalvik Cache
4. Under mounts and storage --> format/system
5. Then install the zip
6. Enjoy
Sent from my GT-I9000 using xda app-developers app
KUN1 said:
I think something went wrong when you installed the first time.
Follow this steps and it should work:
1. Backup your data
2. Enter recovery
3. Wipe data/factory reset
2. Wipe Cache
3. Wipe Dalvik Cache
4. Under mounts and storage --> format/system
5. Then install the zip
6. Enjoy
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Everything went okay even rom was installed but I was getting that error and I am pretty sure I have followed all steps.
wpid data/factory
wipe cache
wipe dalvik cache
format system as well as format datadata.
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
Hmm then i also don't know what went wrong
Sent from my GT-I9000 using xda app-developers app
Same Here!
KUN1 said:
Hmm then i also don't know what went wrong
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi, I also tried the ROM and got the same message (setup wizard...)as you did. After all the "wipes" and format "system" and "datadata" i also made the error of formating SDcard.
Now I have my phone in Restart loop showing Galaxy S logo and then SEMAPHORE....and loop.....and loop....
Sugestions?
Thanks in advance
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
KidCaboz said:
Hi, I also tried the ROM and got the same message (setup wizard...)as you did. After all the "wipes" and format "system" and "datadata" i also made the error of formating SDcard.
Now I have my phone in Restart loop showing Galaxy S logo and then SEMAPHORE....and loop.....and loop....
Sugestions?
Thanks in advance
Click to expand...
Click to collapse
If you can enter recovery try to wipe data and install again ( under mounts and storage you can mount USB and put files on your sd)
If you can't enter recovry you have to flash GB over Odin
Sent from my GT-I9000 using xda app-developers app
Witch files? where? Is there a post with instalar procedure?
Sent from my GT-P5110 using xda app-developers app
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
KidCaboz said:
Witch files? where? Is there a post with instalar procedure?
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
You can install every Rom if you can enter recovery.
Sent from my GT-I9000 using xda app-developers app
Witch files? where? Is there a post with instalar procedure?
Not entering recovery. Only Odin possible
Sent from my GT-P5110 using xda app-developers app
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
KidCaboz said:
Witch files? where? Is there a post with instalar procedure?
Not entering recovery. Only Odin possible
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
There are many tutorials for Odin
Sent from my GT-I9000 using xda app-developers app
Since i'me geting errors flashing files with Odin, my question is:
The Lógic and order of instalation using Odin should, be :
1-flash firmware or kernell file
2-flash ROM of choice
3-flash, goapps file
Thanks
Nuno
Sent from my GT-P5110 using xda app-developers app
AW: [ROM]CyanAOSP v0.5.2 (NEED HELP)
If you start from GB then the order is nornally the following:
-Flash GB (1 or 3 parts)
-Root (flash a kernel via odin)
-Install Rom via recovery
-evtl. Gapps
Sent from my SGH-9000 using xda app-developers app
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
After the procedures you should install, not install and after wipe data etc... etc...
Sent from my LG-P880 using xda app-developers app
Big mistake !
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
Dude 1st: format/wipe everything
2nd: install/flash rom
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
UncleRipper said:
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
Click to expand...
Click to collapse
Probably now you have some kind of tutti-frutti of files in your phone...
Better flash your phone with .kdz or other method, after that follow the tutorial.
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
exFAT said:
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
UncleRipper said:
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
Click to expand...
Click to collapse
Oh, just realised you stated you formatted system. You're not supposed to do that since /system contains the ROM, so it wouldn't boot past kernel logo.
Sent from my LG-P880 using Tapatalk 2
R: [Q] about ROM JB Zaiben by Siauka
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
"FIRST You need:
Flash to orginal JB 4.1.2 20a
Unlock bootloader
Install CWM 6.0.2.8+unsecure boot http://forum.xda-developers.com/show....php?t=2180138
Install tutorial:
1. Place Z.0.1.zip in to your internal sdcard
2. BACKUP ALL YOUR DATA with CWM Recovery
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
4. Flash Z.0.1.zip from sdcard
5. Done"
R: [Q] about ROM JB Zaiben by Siauka
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Did you copy them back to internal storage after factory reset???
R: [Q] about ROM JB Zaiben by Siauka
RuedasLocas said:
Did you copy them back to internal storage after factory reset???
Click to expand...
Click to collapse
Yes
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Yes
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I sugest you to use adb instead of terminal.
Once that you facrtory reseted the phone, check if you didn't forgot nothing... root, etc...
Try install SuperSU if you have Superuser.
R: [Q] about ROM JB Zaiben by Siauka
Thanks
I'll report you back.
Sent from my LG-P880 using xda app-developers app
R: [Q] about ROM JB Zaiben by Siauka
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
If its a hardware issue you should had it before...
You tried to do a clean install?
Hey guys i am on twrp 2.6.1.0 with viperone 2.1.0
Yesterday i made a backup of system data and boot after that whenever i try to flash any addon or zip my phone reboots without flashing. I tried using root explorer and saw a similar problem when i started copying contents it auto rebooted my phone. Can anyone help
Sent from my HTC One using xda premium
hapticc said:
Hey guys i am on twrp 2.6.1.0 with viperone 2.1.0
Yesterday i made a backup of system data and boot after that whenever i try to flash any addon or zip my phone reboots without flashing. I tried using root explorer and saw a similar problem when i started copying contents it auto rebooted my phone. Can anyone help
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
anyone please assist
Did you mount system in TWRP?
Sent from my HTC One using XDA Premium 4 mobile app
born_fisherman said:
Did you mount system in TWRP?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup tried but it wont show it mounted only data and cache show a cross in checkbox when i click on system it does show cross when i go back and again enter the mount option only data and cache have been selected
Sent from my HTC One using xda premium
Are you on stock kernel? I would do a nandroid backup, wipe everything except SD and then restore
I would also try to reinstall recovery image as well. Sounds like something with the read/write got corrupt
Sent from my HTC One using XDA Premium 4 mobile app
born_fisherman said:
Are you on stock kernel? I would do a nandroid backup, wipe everything except SD and then restore
I would also try to reinstall recovery image as well. Sounds like something with the read/write got corrupt
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup i backed up everything wiped and installed viperone again and all seems good now. Waiting for next Viper now
Sent from my HTC One using xda premium
Hi guys i am from india and i am a gsm user but i installed viper 5.0 rom in my sprint one but handsree activation need cdma sim i don't have a cdma sim. i am stuck at handsfree activation cdma sim required plzz guys help... Thanx in advance
Sent from my HTCONE using XDA Premium 4 mobile app
i have the same issue , only I was a former sprint user my phone is flashed to a 3G network ntelos and after almost crying and not sleeping I left it on the activation screen about 7 minutes it finally just said activation failed and continued to setup, this actually happened as I was typing this , I really hope something works for you
Problem solved bro in twrp recovery mount system and open file manager in twrp recovery and delete system-app-htcsetupwizard.apk and wipe dalvic cache done problem solved. Btw thanx for rply
Sent from my HTCONE using XDA Premium 4 mobile app
Thanks it worked gr8.. :good::good:
salmanati said:
Problem solved bro in twrp recovery mount system and open file manager in twrp recovery and delete system-app-htcsetupwizard.apk and wipe dalvic cache done problem solved. Btw thanx for rply
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
salmanati said:
Problem solved bro in twrp recovery mount system and open file manager in twrp recovery and delete system-app-htcsetupwizard.apk and wipe dalvic cache done problem solved. Btw thanx for rply
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
After I delete the htcsetupwizard.apk and boot, I get continuous Setup Wizard force closes. It won't let me do anything else.
How did you get past this?
shane582 said:
After I delete the htcsetupwizard.apk and boot, I get continuous Setup Wizard force closes. It won't let me do anything else.
How did you get past this?
Click to expand...
Click to collapse
Wipe cache
Sent from my HTC One using Tapatalk
shane582 said:
After I delete the htcsetupwizard.apk and boot, I get continuous Setup Wizard force closes. It won't let me do anything else.
How did you get past this?
Click to expand...
Click to collapse
Wipe cache and dalvik cache done
Sent from my HTCONE using XDA Premium 4 mobile app
solution
salmanati said:
Problem solved bro in twrp recovery mount system and open file manager in twrp recovery and delete system-app-htcsetupwizard.apk and wipe dalvic cache done problem solved. Btw thanx for rply
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
but after i do your method, and restart the phone i get setup wizard has stopped
hello
salmanati said:
Problem solved bro in twrp recovery mount system and open file manager in twrp recovery and delete system-app-htcsetupwizard.apk and wipe dalvic cache done problem solved. Btw thanx for rply
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hello friend. I do not work that method , even uninstalling the apk keeps coming at me at the beginning of the data.
Could you help me