[Q] Back & Menu Not Working After Flash with ODIN .Please Help - Galaxy S III Mini Q&A, Help & Troubleshooting

after i flash with odin the back & menu key not work.
sorry for bad english!

paymandragon said:
after i flash with odin the back & menu key not work.
sorry for bad english!
Click to expand...
Click to collapse
Taken you flashed a suitable rom properly, just try rebooting/restarting the phone a couple of times. Might also try factory reset.

ImproAptoVictum said:
Taken you flashed a suitable rom properly, just try rebooting/restarting the phone a couple of times. Might also try factory reset.
Click to expand...
Click to collapse
not worked. any other solution?

paymandragon said:
not worked. any other solution?
Click to expand...
Click to collapse
For further suggestions, could you post a screenshot with the "About device" section of settings (with Baseband version, Kernel version and Build number).

GT-I8190
4.1.2
I8190XXAMA4
Kernel:
3.0.31 -911083
[email protected]#2
KST 2013
Build Number:
JZO54K.I8190XXAMA4

paymandragon said:
GT-I8190
4.1.2
I8190XXAMA4
Kernel:
3.0.31 -911083
[email protected]#2
KST 2013
Build Number:
JZO54K.I8190XXAMA4
Click to expand...
Click to collapse
Try performing a hard reset with Samsung Kies. If you get that your phones firmware is not supported by Kies, then you have most likely not flashed the right firmware with Odin.

not worked.
kies says you are using latest firmware

paymandragon said:
not worked.
kies says you are using latest firmware
Click to expand...
Click to collapse
In some cases this issue is caused by moisture and or humidity, which then can lead to or be a digitizer (hardware) issue too. What is your baseband version?

i flashed with cm11 custom rom. but still not work.
Stock Roms Don't Work Too
when i power on the phone back and menu leds blink

paymandragon said:
i flashed with cm11 custom rom. but still not work.
Click to expand...
Click to collapse
Try flashing stock modem.

Any Other Solution?
Please Help Me

What did you flash with odin? (Custom recovery, other firmware etc.)

Works That I Did:
flash stock rom 4.1.2 with odin
flash mclaw cm11 custom rom
flash stock 4.1.1 rom with spt-box
flash stock rom 4.1.2 I8190N with odin
but still not solved.
and this is software problem. because after i flash stock 4.1.2 with odin this problem created

paymandragon said:
Works That I Did:
flash stock rom 4.1.2 with odin
flash mclaw cm11 custom rom
flash stock 4.1.1 rom with spt-box
flash stock rom 4.1.2 I8190N with odin
but still not solved.
and this is software problem. because after i flash stock 4.1.2 with odin this problem created
Click to expand...
Click to collapse
Did you flash a original firmware from : sammobile.com/firmware ?

xXPR0T0TYPEXx said:
Did you flash a original firmware from : sammobile.com/firmware ?
Click to expand...
Click to collapse
Yes. But Not Worked

Then try to get a navigation bar (only if you have root) download xposed installer link :http://forum.xda-developers.com/showthread.php?t=1574401 and install the framework. Reboot. After that go to download option from xposed installer and download gavitybox [JB]. Install it and activate it in modules of xposed installer. Reboot. Then open gravitybox and go to navigation bar and acrivate master switch and enable nvigation bar. Reboot and you will get a navigation bar This also works on stock rom (TouchWiz)

paymandragon said:
Yes. But Not Worked
Click to expand...
Click to collapse
If you don't know whats a navigation bar then see screenshot

xXPR0T0TYPEXx said:
Then try to get a navigation bar (only if you have root) download xposed installer link :http://forum.xda-developers.com/showthread.php?t=1574401 and install the framework. Reboot. After that go to download option from xposed installer and download gavitybox [JB]. Install it and activate it in modules of xposed installer. Reboot. Then open gravitybox and go to navigation bar and acrivate master switch and enable nvigation bar. Reboot and you will get a navigation bar This also works on stock rom (TouchWiz)
Click to expand...
Click to collapse
thank you for answer. but i want my originall back & menu softkey back.not virtual key.
whith this solution my originall softkeys will back?

paymandragon said:
thank you for answer. but i want my originall back & menu softkey back.not virtual key.
whith this solution my originall softkeys will back?
Click to expand...
Click to collapse
This solution will not get your original hardware key back. Just virtual key. Does your Home button work?

xXPR0T0TYPEXx said:
This solution will not get your original hardware key back. Just virtual key. Does your Home button work?
Click to expand...
Click to collapse
yes. my home button works.

Related

Stock rom code / Brick note?

Hi there,
Is 't me or do you need a code to extract the stockroms from development?
I downloaded a few, and I needed a code to extract them.
Another question is if you can go in download mode, and you can only go in recovery mode when you flash one. Is my note fully Bricked? It freezes when I flash a rom.
Thanks
Explain in detail
What code to extract the stock roms and from what development ?
AFAIK,there are no stock ROMS in the Note development forum
Explain what you did in detail-which ROM you flashed,which guide you followed-things like that.
felleke said:
Another question is if you can go in download mode, and you can only go in recovery mode when you flash one.
Click to expand...
Click to collapse
What does the above statement mean ?
All I understand is you can go in download mode and you can only go in recovery mode when you flash one(one meaning a ROM I presume)
That's not true, you can access the stock Android recovery through a stock ROM
warfareonly said:
What code to extract the stock roms and from what development ?
AFAIK,there are no stock ROMS in the Note development forum
Explain what you did in detail-which ROM you flashed,which guide you followed-things like that.
There is a thread called [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest ICS LQ3 in
Galaxy Note GT-N7000 Android Development
I downloaded a older version 2.3.5 netherlands. Is in zip. Now I want to extract with winrar and I need a code.
Click to expand...
Click to collapse
Oh s**t, that thread ? Have gotten so used to it that it's almost home ! Forgot where it is though.Thanks for that.
Password is samfirmware.com
Read more carefully, it's written right in the first post
Again, thanks for pointing it out !
I have downgraded from rooted criskelo ICS v06 to stock rom KK1) based on dr.ketan's instruction, but the problem with the stock GB Rom is that all my accounts could not log in. Do you guys have any ideas on how to solve this?I've done full wipe on the phone.
Try wiping once more and wipe dalvik cache too.
If it doesn't work, try flashing stock rom again and repeat.
Alternatively, try flashing another stock rom.I use the KL3 stock rom to downgrade and it's never given me any problems
warfareonly said:
Try wiping once more and wipe dalvik cache too.
If it doesn't work, try flashing stock rom again and repeat.
Alternatively, try flashing another stock rom.I use the KL3 stock rom to downgrade and it's never given me any problems
Click to expand...
Click to collapse
I tried (vol up+ power on + center button) option but what on the recovery option, only wipe data and cache is available..there is no advance option on the recovery mode..
botacx said:
I tried (vol up+ power on + center button) option but what on the recovery option, only wipe data and cache is available..there is no advance option on the recovery mode..
Click to expand...
Click to collapse
You don't have CWM recovery installed on your phone ?
Then didn't you root the stock GB ROM you downgraded to ?
warfareonly said:
You don't have CWM recovery installed on your phone ?
Then didn't you root the stock GB ROM you downgraded to ?
Click to expand...
Click to collapse
no, I didn't installed CWM because I am thinking of keeping it stock original until a stabil ICS ROM is issued. will this be an issue?
** i tried rooting and installing CWM but to no avail,the error said dev/block/...0p5: permission denied. how can I give this permission? I screwed up during the downgrading process..
Did you enable the usb debugging option ?
Try flashing another stock ROM and then rooting the phone
warfareonly said:
Did you enable the usb debugging option ?
Try flashing another stock ROM and then rooting the phone
Click to expand...
Click to collapse
yes, enabled usb debugging option already. how did you root KL3? using mobile odin?
Nope, using dr.Ketan's guide in the Development section

Stuck on boot screen

I just flashed a new rom
Alba syndicate
And im stuck on the boot screen
what should i do?
Hearmeman said:
I just flashed a new rom
Alba syndicate
And im stuck on the boot screen
what should i do?
Click to expand...
Click to collapse
Have you check md5 rom.hold power+home+volumn to push back into recovery then reflash the rom again or another the one.
Good luck...
simplelife said:
Have you check md5 rom.hold power+home+volumn to push back into recovery then reflash the rom again or another the one.
Good luck...
Click to expand...
Click to collapse
reflash hasn't worked
i want this rom cant i do something else?
Hearmeman said:
reflash hasn't worked
i want this rom cant i do something else?
Click to expand...
Click to collapse
I mean ,had you check the rom you download are full sometime it's download shorter then support to ( example: the rom support 600 mb but you are download just 580 mb and you don't know...hope this help
simplelife said:
I mean ,had you check the rom you download are full sometime it's download shorter then support to ( example: the rom support 600 mb but you are download just 580 mb and you don't know...hope this help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1579301
It doesn't say here
the download is full on my computer 881MB
tried with diffrent kernel
any clues?
are you still able to boot in download mode? if you are still able to... in my rule of law in flashing ROMS.... custom or otherwise...downgrade first to stock GB, then once your in stock GB, that'll be the time you wipe data/factory reset, and then upgrade to Alba syndicate.
letters_to_cleo said:
are you still able to boot in download mode? if you are still able to... in my rule of law in flashing ROMS.... custom or otherwise...downgrade first to stock GB, then once your in stock GB, that'll be the time you wipe data/factory reset, and then upgrade to Alba syndicate.
Click to expand...
Click to collapse
I Need a rooted GB?
Hearmeman said:
http://forum.xda-developers.com/showthread.php?t=1579301
It doesn't say here
the download is full on my computer 881MB
tried with diffrent kernel
any clues?
Click to expand...
Click to collapse
Are you familiar with Aroma install ? It's good & bad too
Hearmeman said:
I Need a rooted GB?
Click to expand...
Click to collapse
Try to flash STOCK Non-rooted GB ROM , for example http://hotfile.com/dl/141781856/f226b7d/N7000XXLA3_N7000OXALA3_OXA.rar.html
Hope you fix your problem.
Hearmeman said:
I Need a rooted GB?
Click to expand...
Click to collapse
For the moment, you don't need a root ROM, all you need is that your GNote can boot into download mode (hold vol- and power and home button [the button in the middle] for about 8 sec until the Samsung Galaxy Note logo shows up, then you could release the button)
You can download a stock GB from http://samfirmware.com/
I recommend a wipe version.
Then flash it using Odin PC (no increase of the binary counter because it's a stock ROM),
And then you can root it using any method you want (for gingerbread). Now you can flash any ROM you want by following OP's instructions
Hearmeman said:
I Need a rooted GB?
Click to expand...
Click to collapse
You can try pre-rooted stock GB. Try searching for Doc Ketan's thread on this forum. He has those links + the instructions on how to downgrade it.
Cheers!
simplelife said:
Are you familiar with Aroma install ? It's good & bad too
Click to expand...
Click to collapse
quite good flashed a few roms
sometimes getting stuck
Seyhan60 said:
For the moment, you don't need a root ROM, all you need is that your GNote can boot into download mode (hold vol- and power and home button [the button in the middle] for about 8 sec until the Samsung Galaxy Note logo shows up, then you could release the button)
You can download a stock GB from http://samfirmware.com/
I recommend a wipe version.
Then flash it using Odin PC (no increase of the binary counter because it's a stock ROM),
And then you can root it using any method you want (for gingerbread). Now you can flash any ROM you want by following OP's instructions
Click to expand...
Click to collapse
ok thank you
But i cant download from that site
can you give a link to the firmware as a direct download?
Hearmeman said:
quite good flashed a few roms
sometimes getting stuck
ok thank you
But i cant download from that site
can you give a link to the firmware as a direct download?
Click to expand...
Click to collapse
linkenhtc said:
Try to flash STOCK Non-rooted GB ROM , for example http://hotfile.com/dl/141781856/f226b7d/N7000XXLA3_N7000OXALA3_OXA.rar.html
Hope you fix your problem.
Click to expand...
Click to collapse
Here it is.Just read
linkenhtc said:
Here it is.Just read
Click to expand...
Click to collapse
Oh sorry sorry :silly:
Gone back to GB
Rooted it
installed cwm
Tried to install
and still not a bloody clue
its might be the rom itself right?
What error do you get?
Or is it the same problem: the phone still doesn't boot ? Stuck on Samsung Galaxy Note boot logo?
Is your device under warranty?
Go To Recovery And Wipe Cache/Dalvik And Reboot

[Q] What`s the correct kernel to my device??

Hi guys. I have a I9000 and i want to install the CyanogenMod 9 on it. I`ve Already rooted my phone using the Unlock Root. However, I can`t go to the Clockworkmod recovery to install customs rooms. I tried to flash the CWM recovery using the Rom Manager app, but when i was installing, an error happened. I figured out that the problem is my kernel that is not compatible with the CWM. I know that i have to flash a compatible kernel using Odin, but which kernel should i flash??? My device is a Galaxy S I9000, 2.3.5 android, and 2.6.35.7-I9000XXJVT-CL617736 kernel. Already rooted. Please someone could help me??
Thank you so much
Don't use rom manager, use Odin to flash, CWM is bundled with rooted kernel (CF-root, Semaphore)
Here is a collection of links and tips to tackle different situations when flashing, updating, fixes...
http://forum.xda-developers.com/showthread.php?p=30415128
This guide could work for updating to cm9.1
http://forum.xda-developers.com/showthread.php?p=22471340
Most important is to start making a backup of files in /efs folder in case of IMEI loss after some flash job.
http://forum.xda-developers.com/showthread.php?p=9567974
O-T said:
Don't use rom manager, use Odin to flash, CWM is bundled with rooted kernel (CF-root, Semaphore)
Here is a collection of links and tips to tackle different situations when flashing, updating, fixes...
http://forum.xda-developers.com/showthread.php?p=30415128
This guide could work for updating to cm9.1
http://forum.xda-developers.com/showthread.php?p=22471340
Most important is to start making a backup of files in /efs folder in case of IMEI loss after some flash job.
http://forum.xda-developers.com/showthread.php?p=9567974
Click to expand...
Click to collapse
Hi, I have the same error problem, cf root was not bundled with my own root package. I flashed to gingerbread 2.3.6 xwjw1, I also tried rom manager to flash recovery and it was successful, but when I rebooted to recovery to backup my current rom it bootes to the android (3e) recovery. As I've discovered it seems rom manager is not compatible with the xwjw1 series. How do I get the correct cf root for xwjw1? Believe me I have tried google and am scared of the things I see since "jw1" is not behind any of the cf root packages I see. Any help would be appreciated, thanks.
xtome
On xwjw1 you can Odin flash as PDA Semaphore 250 tar kernel
http://forum.xda-developers.com/showthread.php?p=14481782
Untick re-partition before flashing.
After reboot you may need to install Superuser from Play Store.
That will give you root, CWM, gingerbread ready for CM9.1
O-T said:
xtome
On xwjw1 you can Odin flash as PDA Semaphore 250 tar kernel
http://forum.xda-developers.com/showthread.php?p=14481782
Untick re-partition before flashing.
After reboot you may need to install Superuser from Play Store.
That will give you root, CWM, gingerbread ready for CM9.1
Click to expand...
Click to collapse
Thanks a lot ot will try it out and get back to you. Once again thanks.
Or you can use the app SGS kernel flasher. Find in play store.
renanrolim said:
Hi guys. I have a I9000 and i want to install the CyanogenMod 9 on it. I`ve Already rooted my phone using the Unlock Root. However, I can`t go to the Clockworkmod recovery to install customs rooms. I tried to flash the CWM recovery using the Rom Manager app, but when i was installing, an error happened. I figured out that the problem is my kernel that is not compatible with the CWM. I know that i have to flash a compatible kernel using Odin, but which kernel should i flash??? My device is a Galaxy S I9000, 2.3.5 android, and 2.6.35.7-I9000XXJVT-CL617736 kernel. Already rooted. Please someone could help me??
Thank you so much
Click to expand...
Click to collapse
Use Odin to flash (put .tar in PDA and uncheck repartition). You can flash Semaphore JVT 1.8.0 or CF-Root v4.3
Sunnymen1975 said:
Or you can use the app SGS kernel flasher. Find in play store.
Click to expand...
Click to collapse
Thanks Sunny men, but OT's advice worked, I can now boot to semaphore recovery and wipe etc.
Question though, if I now flash cm9.1 rom, will I be able to boot to recovery without the holding any button combinations. What I mean is can I boot to recovery from the shutdown menu or do I need an app for it?
Also is cm9.1 the best rom for my phone? any thots guys? Thanks again.
xtome said:
Thanks Sunny men, but OT's advice worked, I can now boot to semaphore recovery and wipe etc.
Question though, if I now flash cm9.1 rom, will I be able to boot to recovery without the holding any button combinations. What I mean is can I boot to recovery from the shutdown menu or do I need an app for it?
Also is cm9.1 the best rom for my phone? any thots guys? Thanks again.
Click to expand...
Click to collapse
Yes, in CM 9.1 you can boot directly to recovery from the shutdown menu. CM 9.1 is very stable and fast, so try it. And when you flash CM9 for the first time, your galaxy will go into a bootloop. Then remove the battery, put it in, go to recovery with 3-button configuration and flash it again.
sin007 said:
Yes, in CM 9.1 you can boot directly to recovery from the shutdown menu. CM 9.1 is very stable and fast, so try it. And when you flash CM9 for the first time, your galaxy will go into a bootloop. Then remove the battery, put it in, go to recovery with 3-button configuration and flash it again.
Click to expand...
Click to collapse
Thanks sin007, that is invaluable advice. Will do just that. thanks again.
Hi guys, thanks for all the help. I have flashed CM 9.1 successfully.
Everything works OK for now.
Also flashed gapps, CM 9.1 seems to be a great ROM.
I have a question though, the gapps I flashed seems to have only a few Google apps, play store and Google talk. The file size was 49mb so is that all that's in gapps or is there a hidden mode or something.
Also, sin007 I can't find any reboot to recovery from the shutdown menu, though I flashed a stable version of CM 9.1 and not a "nighty version". Could that be the reason? But no biggie, CM 9.1 comes with rom manager.
Finally I wouldn't mind any tips you guys have on making the most out of the ROM.
Thanks and all the best.
Shutdown menu - Reboot - Recovery
OK?
There is an APP on google play, sgs kernel flash, it is easier and faster than Odin. And works perfectly. I've flash the speedmod kernel and finally upgrade to cyanogenmod 9.1.
Anyone knows if this APP works on galaxy s2 (i9100)?
Thankss
Sent from my Nexus 7 using xda app-developers app
O-T said:
Shutdown menu - Reboot - Recovery
OK?
Click to expand...
Click to collapse
Oops sorry, didn't bother pressing the reboot button, typical noob error. Thanks OT.
I have a problem though, I just discovered my phone's imei number has changed after I flashed cyanogenMOD 9.1. How is this possible and how do I get back my original imei number?. Thanks.
xtome said:
I just discovered my phone's imei number has changed after I flashed cyanogenMOD 9.1. How is this possible and how do I get back my original imei number?. Thanks.
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showthread.php?t=1857054 and solutions for it on My Android Solutions, link below
xsenman said:
read this http://forum.xda-developers.com/showthread.php?t=1857054 and solutions for it on My Android Solutions, link below
Click to expand...
Click to collapse
Thanks xsenman, you're a lifesaver. Love all ur posts, really useful to have. Thanks again and also a big thanks to all who helped out.
Cheers everyone.

[Q] Backup option not showing in recovery mode (2.3.6 Gingerbread)

Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
skatlyup said:
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
Click to expand...
Click to collapse
1. You instaled Jelly Bean ROM on Gingerbread. If you want it you need to flash JB with Odin, you have guide here - search for it.
2. We only can use custom recovery that is instaled with kernel, because those two share same partition. So no other way to install it, like on some other phones.
3. You probably got bootloop after installing JellyMOD on GB, so I suggest you to flash GB again. Or JB if you want it.
4. After geting back to GB, you can go get that recovery back and restore your prevoius ROM.
shut_down said:
1. You instaled Jelly Bean ROM on Gingerbread. If you want it you need to flash JB with Odin, you have guide here - search for it.
2. We only can use custom recovery that is instaled with kernel, because those two share same partition. So no other way to install it, like on some other phones.
3. You probably got bootloop after installing JellyMOD on GB, so I suggest you to flash GB again. Or JB if you want it.
4. After geting back to GB, you can go get that recovery back and restore your prevoius ROM.
Click to expand...
Click to collapse
Thanks for the reply but I think you may have misunderstood.
I haven't installed JB YET, so I am STILL on Gingerbread.
Any options I have?
skatlyup said:
Thanks for the reply but I think you may have misunderstood.
I haven't installed JB YET, so I am STILL on Gingerbread.
Any options I have?
Click to expand...
Click to collapse
I was tired. I read that you instaled JellyMOD. You have stock recovery, it do not have backup. You need to root, and to install kernel with TWRP. Look for it in dev section of our phone. If you want Jelly MOD you need to flash JB with Odin.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
I was tired. I read that you instaled JellyMOD. You have stock recovery, it do not have backup. You need to root, and to install kernel with TWRP. Look for it in dev section of our phone. If you want Jelly MOD you need to flash JB with Odin.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Since my phone is already rooted is it ok just to install the kernel?
After a search I found this [GT-I9070][Kernel][GINGERBREAD] Stock Kernel + TWRP Recovery for Galaxy S Advance (http://forum.xda-developers.com/showthread.php?t=1873119&highlight=kernel+gingerbread).
Would it be ok to just install this via Odin?
Not with odin but yes, that is what you need. Get universal kernel flasher and use that tool to flash kernels. Odin way will increase binary counter.
Sent from my GT-I9070 using xda app-developers app
Thanks for your replies.
I managed to install the kernel now and backup my phone.
skatlyup said:
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
Click to expand...
Click to collapse
JellyMod is base on JellyBean offical rom so it can't install from Gingerbread you have to update to jellybean with Kies or flash it with odin. Then get to recovery mode flash CWM and do what you want like root or flash kernel or Jellymid
Sirry for my english

looking for a stock firmware

Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
tsikoske said:
Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
Click to expand...
Click to collapse
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
shut_down said:
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
Click to expand...
Click to collapse
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
tsikoske said:
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
Click to expand...
Click to collapse
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
shut_down said:
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
Click to expand...
Click to collapse
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
tsikoske said:
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
Click to expand...
Click to collapse
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
shut_down said:
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
Click to expand...
Click to collapse
oh ok. sorry my phone is fine now btw. flash with odin =)

Categories

Resources