Database Develop

[ROM] CyanogenMod 6.1 V1 - CWM - 23-04

Hi every one! I give you another good build. It repark from CM Modded Build V.2 by needo, and work with ClockworkMod, so here is the build:
I. Download needed file:
1. CyanogenMod 6.1 V1 - CWM - 23-04.zip
http://www.multiupload.com/QQF81OD7IE
2. npkboot-cwm-v15-x1-monsterKernel.rar
http://www.multiupload.com/R4A7PJE00T
II. before install :
1. Format your sdcard make 4 Partition with recommended size:
1st partition: FAT32 (sdcard / Rest)
2nd partition: EXT2 (system / about 150MB -> depends on the build )
3rd partition: EXT2 (data / about 250MB)
4th partition: EXT2 (cache / about 50MB)
Be sure make all 4 partition primary
2. extract and copy folder npkboot to root of sdcard.
3. Copy Rom ( zip file , don't extract) in to root of sdcard.
III. Install:
1. run Haret, and wait when it will be asked to press "Volume Down" shortly (!!important!! shortly) to launch ClockworkMod Recovery or any other key to usually continue booting into Android.
Press volume Down and wait for menu Recovery.
2. In menu recovery choose "install zip from sd-card" choose zip from sdcard and select "CyanogenMod 6.1 V1 - CWM - 23-04.zip" . Confirm instalation then reboot system.
4. Run HARET again and press any key (except Volume keys) to continue booting into Android.
Tips:
First boot :
*Settings > CyanogenMod Settings > User interface > tweaks extra > load theme > choose CM 6.1 white
- This will change the status bar text colour to white ...
*Launcher settings > change theme > choose the gre theme ...
*disable data transfer
*disable auto-rotate screen
- Android won't performing very well at first running hours, if you have many media files (pic,videos..) .. system will be busy searching for these files & creating thumbnails for them ... the time for that is depending on the quantity of the media on the SD card ..
UPDATE:
- If you can't boot to android, try change modules to Turbo kernel and reinstall.
- If you want stop problem key freeze, download kernel with keyboard as modules and follow this link http://forum.xda-developers.com/showpost.php?p=11808067&postcount=2 how to do ^^!
- For better batterry, download and install SetCPU, then custom it yourself !
- For better speed install ADW Laucher ^^!
Thanks to Neopeek, needo and other developers !

I have done:
- Everything copied to SD following the how to.
- [2011-04-18] FRX06 [CWM] worked, but this rom doesn't work
- Formated ext2 partitions to erease the old rom.
- Using Duckly's Kernel [Turbo Kernel] WITH KEYPAD DRIVERS AS MODULES
Problem:
I can run haret but when I have to click vol down it doesn't launch the recovery mode. it wants to continue.
With the FRX06 it worked but now it doesn't work
BTW: the hyperlink after "Update:" isn't working
Hope you can help me
EDIT: Changing Kernel to Duckly's Kernel [Turbo Kernel] [25-3-2011] WITH KEYPAD DRIVERS NOT AS MODULES has solved my problem.
Is there a way to use the Kernel with keypad drivers as modules?

neoofoox said:
I have done:
- Everything copied to SD following the how to.
- [2011-04-18] FRX06 [CWM] worked, but this rom doesn't work
- Formated ext2 partitions to erease the old rom.
- Using Duckly's Kernel [Turbo Kernel] WITH KEYPAD DRIVERS AS MODULES
Problem:
I can run haret but when I have to click vol down it doesn't launch the recovery mode. it wants to continue.
With the FRX06 it worked but now it doesn't work
BTW: the hyperlink after "Update:" isn't working
Hope you can help me
EDIT: Changing Kernel to Duckly's Kernel [Turbo Kernel] [25-3-2011] WITH KEYPAD DRIVERS NOT AS MODULES has solved my problem.
Is there a way to use the Kernel with keypad drivers as modules?
Click to expand...
Click to collapse
I see, your problem is monster kernel not work with your phone, and when you change it to Turbo kernel it work ^^!
FOr use kernel with kaypad as modules, please read this thread http://forum.xda-developers.com/showpost.php?p=11808067&postcount=2
First: boot to android, then install autostart.apk and GScript.apk.
next: open terminal , remove modules and copy autostart.sh like that thread write. then open GScript and add script like that thread write.
next: reboot to winmobile, copy Turbo Kernel with keypad as modules to your sdcard/npkboot folder, replace the old file in there.
Final: boot to android, then make a shotcut GScript in home screen, when keypad die, just open the shotcut and it will work again.
Hope it have you

I see, your problem is monster kernel not work with your phone, and when you change it to Turbo kernel it work ^^!
Click to expand...
Click to collapse
I have never used Monster Kernel because I think it needs more battery than the Turbo kernel so I changed it to the Turbo Kernel.
After adding "ts-calibration"-file to the npkboot folder, it is starting now
*Settings > CyanogenMod Settings > User interface > tweaks extra > load theme > choose CM 6.1 white
- This will change the status bar text colour to white ...
Click to expand...
Click to collapse
There is no "CM 6.1 white" (CMTheme folder is empty) but the "STOCK_Black" makes the clock visible (status bar still black). Finaly I copied the "CM 6.1 white"-file from the EXT2 version.

[Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27-12]

Finally, I finished creating my scripts & kernel for booting a rom on SD Card. Dual boot kernels, preinstalled roms, setup scripts, instructions are available below.
How to make a rom on SD Card
Requirements: 3.1 GB of free space on your internal SD Card.
New method to set up the rom, fast and easy. You can now boot 5 different roms
Here is some new kernels you can try, but the setup in the Aroma v2.3c package below
PhilZ-cwm6-XXLS7-XJB-3.1-dualboot.zip (support only TW JB roms)
http://www.mediafire.com/?os6zi3u2mpe6yih
PhilZ-cwm6-XXLS2-XJB-2.7-dualboot - thanks to Phil3759 (support only TW JB roms)
http://www.mediafire.com/?k574667whh3c6qk
Hydracore v6.2 beta3 OC - dualboot kernel
http://www.mediafire.com/?0w852y7hl5yf8k8
Hydracore v5.4 - dualboot kernel
http://www.mediafire.com/?iawqi5picfcb9sm -STD
http://www.mediafire.com/?w18xigwkd9ya4no -OC
Download this current Aroma version
Version 2.3c http://www.mediafire.com/?5ym62wr7kta1u2o
- Added Timeout 15 seconds for the Boot Menu
- Fixed issue with the rom3 external in the Boot Menu
- Added Option to fix root in page 2 of the tools section.
Version 2.3b http://www.mediafire.com/?g3g8hdc2n0j3u9v
- Added Hydracore v4.3b kernels
- For some users, if you don't see the bootsdrom.cfg in the \sdcard\SDRoms folder, simply extract it from the Chuan_Dualboot_Aroma_v2.3b.zip (in the Default folder) and put the bootsdroms.cfig in the \sdcard\SDRoms to enable the dualboot roms.
- For some users, if you want to show the boot menu, you can put an empty file named "bootmenu_on" in the \sdcard\SDRoms folder.
Version 2.1b http://www.mediafire.com/?7aqibjh5nhgnh6m
- Added Hydracore v4.1b kernels
- Possible fix for the bootsdrom.cfg not being extracted for some users
Version 2.0 http://www.mediafire.com/?y0gsnzmwb7e8r6z
- Added Hydracore v3-5 kernels
- Fixed issue setting up the rom partition images on the external SDCard.
Version 1.9-1 http://www.mediafire.com/?foumtinhrhid2c6
- fixed the issue that the STD kernel always being flashed when select the OC one.
Version 1.9 http://www.mediafire.com/?ykvjahj8d32pcdv
- Added Hydracore v3-1 both OC and STD versions.
- Add boot menu options. This can be turned on and off in the "Set Default Booting Rom" section in the dualboot Aroma.
- More checking in the mount partitions tool to make sure we don't mess-up the phone rom. Again, if you see any error, don't flashing any rom/mod, otherwise it will mess up the main phone rom.
Version 1.8 http://www.mediafire.com/?lpxesvw31u3es6a
- Use a new method to mount the partitions for a rom on SDCard. Now you can directly flash new roms without messing up the phone rom.
- Clean up other versions, they seem to be obsolete now.
How to setup and flash a new rom for booting from SDCard
Please follow the instructions below, this is the most easiest ever!!! There is no need to modify the rom or mod before flashing with my tool.
1. Back up your data (just in case)
2. Reboot to recovery and flash Chuan_Dualboot_Aroma_v1.8.zip
- Select Tools section. Then select the rom slot you want. If this is the first time you use that rom slot you need to setup system, data, and cache images for the rom. In page 1 of the tool, check "Setup System" and "Setup data & cache" to setup the images. You need to do this only one time
- In page 2, select "Wipe system", "Wipe data", and "Wipe cache"
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any rom you like as normal. It will be flashed to the rom slot you just select in the step 2. Don't reboot after complete because you need to flash a dualboot kernel after.
4. Flash Chuan_Dualboot_Aroma_v1.8.zip again, then select "Set Default Booting Rom", then select the same rom slot in step 2.
- Then select "SDCard" as default, and select "Don't Share"
- Then click "Yes" for the popup "Flash a Dualboot Kernel?" to flash a dualboot kernel. You have to flash a dual-boot kernel because in step 3, the kernel has been changed after flashing a new rom.
- Next select "HydraCore v1-7" this can boot most roms, Or you can choose "Goku v1.5-11" only CM9 & TW.
- Click "Next" till the end, and reboot the phone.
5. Now the phone should boot in to a rom on your SDCard.
Tips: To switch the rom, flash Chuan_Dualboot_Aroma_v1.8.zip again, and then select "Phone" as default in the "Set Default Booting Rom" section.
Or you can keep pressing and un-pressing the HOME BUTTON at boot.
Enjoy flashing and new roms, and good luck to you!!!!!
Here is the tutorial how to flash mods/themes, just a little bit different from flashing the rom.
1. Back up your data (just in case), you may also backup the rom folder in the SDRoms folder you want to flash a mod.
2. Reboot to recovery and flash Chuan_Dualboot_Aroma_vXX.zip
- Select Tools section. Then select the rom slot you want. Skip Page 1, Then in page 2, select "Wipe dalvik-cache" only
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any mod you like as normal. It will be flashed to the rom slot you just select in the step 2.
- Click "Next" till the end, and reboot the phone.
4. Reboot the phone and boot the rom you want.
FAQ
1. I get an error, what should I do?
- Reboot into recovery, and start over
- If still get the error, Flash "HydraCore v1-7" kernel, and reboot into recovery, and start over
- If still get the error, save the recovery log and post it here.
2. How do I reset the rom on SDCard?
- Flash Chuan_Dualboot_Aroma_v1.8.zip, then select "Tools", select the rom slot you want to reset, skip page 1, then select "Wipe data", and "Wipe cache" in page 2. Then next until finish.
Credits and special thanks to:
- Hardcore for his SpeedMod N7000 ICS.
- superatmos for his TUTORIAL Building Kernel from source
- criskelo for some aroma scripts
- g.lewarne for HydraCore Universal kernel
- funky81 for first CM9 & TW kernel
- ashwin123 for Video Tutorial
- Samsung and developers for some wonderful roms.
WARNING: I've tested and used my scripts and modified kernels on my phone without any problem. There is always a risk when flashing a kernel or a new rom, so flash as your own risk. I have no responsible for any damage to your phone
Pre-install Roms
To make it easier, I have some pre-install roms on SD Card for you guys. Just extract it then it's ready to go.
1. flash pre-install rom
2. flash dualboot kernel
3. reboot
Now you should be able to boot your current rom (samsung ics only) and the pre-install rom on your sd card. Keep press/unpress the home button at boot until you see the boot animation to switch the rom. Check the log and the config file in the SDRoms for more details.
Pre-installed Cassies_XLR_ICS_V4_LQ3 rom - thanks to thering1975
https://docs.google.com/open?id=0BwDBny0G97K5SXZ0dzc3RHNSb2c
Pre-installed [ROM][TABLET/HYBRID]STAXXTANIUM-PARANOIDANDROID. V1.7 - Original Thread - thanks to Staxxthedan
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash sd_internal_preinstall-rom-PARANOIDANDROIDv1.7.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwDBny0G97K5Uy04S0I4eGtrV1k
- Flash cm9_stock_kernel_dualboot.zip to boot the CM9 rom on your sd card
download link http://www.mediafire.com/?gkgvl950d38ka9c
- Reboot, and wait for the phone to boot in to PARANOIDANDROID rom
Pre-installed Preinstalled-Liquid_Black_V 3.2 - Original Thread - thanks to firasusman
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash Preinstalled-Liquid_Black_V 3.2_rom1.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwDBny0G97K5Z1FuMnh0M2otVG8
- Flash any Samsung ICS dual boot support above (not CM9 kernel) to boot the rom on your sd card.
- Reboot, and wait for the phone to boot in to boot rom on SD Card.
Pre-installed [ROM][JB 4.1.1] PARANOIDANDROID v1.2 [TABLET/HYBRID][CM10] - Original Thread - thanks to imilka
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash PARANOIDANDROID v1.2 [TABLET/HYBRID][CM10]_rom1.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwDBny0G97K5TmR3RWZxbG4wQ2s
- Flash cm10_kernel_dual_new.zip to boot the rom on your sd card
download link http://www.mediafire.com/?da4cuozus6tdlv3
- Reboot, and wait for the phone to boot in to PARANOIDANDROID v1.2 rom
- Note: Flash any kernel that works with your phone rom to boot back your phone rom.
Pre-installed CM9 Stable Aroma can select 1 of the 5 rom slot via Aroma. Hope someone can help post more pre-installed roms by replacing the system.img.
You can dual boot this rom with any TW rom using the Goku v1.5-11 kernel.
https://docs.google.com/open?id=0BwDBny0G97K5Tjl5dWVqZnNzc2M
Pre-installed Roms by REVERSiN Sep-3-2012
CM10 - Preview5 UNOFFICIAL : https://docs.google.com/open?id=0B-FfdI4hUTJReFVocmdYMFJwcVE
PARANOiD - JB - v1.911 BugFIX : https://docs.google.com/open?id=0B-FfdI4hUTJRMjgzSEhrelJjbm8
Pre-installed Roms by yats86
ParanoidAndroid 1.3 [JB][TABLET/HYBRID]
Link to download rom: http://www.4shared.com/zip/BxEHxBRC/...l-rom-PAR.html
Mirror: http://www.MegaShare.com/4496353
TMT Midteam 2.2 ICS 4.0.4
Link to download rom http://www.4shared.com/zip/_8VkyH18/...l-rom-TMT.html
Mirror: http://www.MegaShare.com/4496423
CriskeloRomNOTE.vICS-V11.2
Link to download rom http://www.4shared.com/zip/6DPerI8k/...l-rom-Cri.html
Mirror: http://www.MegaShare.com/4496472
More roms will be added later.....
How to make a pre-installed rom
- After setup a rom and copy the system partition to SD Card. You can simply replace the system.img file in any of my pre-installed rom with your system.ing then upload the zip and share with your community. Thank you to anyone who can help with this.
---------------------------------------------------------------------------------------------
Intramfs Source
http://www.mediafire.com/?sk31d47jeh7q2sy - initramfs source for my dualboot1.0 feature.
http://www.mediafire.com/?oob18xxqit8cqmy - initramfs source for my dualboot3.1 feature.

Old Version
Code:
Version 1.7 [url]http://www.mediafire.com/?5w03c1q49wppbgb[/url]
-Added HydraCore v1 - big thanks to g.lewarne who makes this universal kernel working for all roms TW, MIUI, CM9, CM10. Now you can use this kernel to dual boot any rom you want.
-Added latest CM10 kernel.
[SIZE="3"][B][COLOR="blue"]How to modify rom and directly flash it using the Mount Partitions Tool[/COLOR][/B][/SIZE].
[COLOR="DarkOrange"]Most of MIUI,CM9,CM10 roms have the format command which is not safe for directly flashing a rom on SD Card. Follow this instruction to remove the format command.[/COLOR]
1. Extract the rom
2. Then edit the file META-INIF\com\google\android\updater-script using Notepad++
3. Take out the format command [B]format("ext4", "EMMC", "/dev/block/mmcblk0p9", "0");[/B] if there is any
You may also take out all the mount, unmount, kernel flashing, and modem flashing or any command that is related to mmcblk.
4. Compress/Zip the rom back. Now you have the modified rom.
5. Now it ready to flash using the mount tools. Boot recovery, run my dualboot aroma, select tools.., select a rom to flash, in page 1 select wipe system, data, and cache, then in Page 2 select mount partitions for rom on SDCard. Don't reboot after run the script. If don't see any error or fail. Then go ahead flash the modified rom. It should directly flash it into the rom you just pick. Now flash a dualboot kernel you like and enjoy your new roms.
Note: Do the same for any mod, except you don't need to modify the mod, just run the mount tool and flash the mod.
[SIZE="3"][B][COLOR="blue"]How to Setup[/COLOR][/B][/SIZE]
1. Flash a rom you want, make sure follow the instructions of the rom you want to flash. Otherwise you will get a brick.
2. Run (flash) Chuan_Dualboot_Aroma_vXX.zip, then select Tools, then select rom slot (1 out of 5 slots) you want, then select "Copy system to SDCard" and "Wipe data & cache". This tool will copy your current rom to SD Card and setup the data.img and cache.img for the rom on SDCard. I takes about 5 to 10 minutes to process. [COLOR="red"](don't reboot after completion)[/COLOR]
3. Repeat the step 1 & 2 if for the second, third, fourth, or fifth rom except you need to pick a new rom slot. [COLOR="red"](don't reboot after completion)[/COLOR]
4. Run (flash) Chuan_Dualboot_Aroma_vXX.zip again. Select Default Booting Rom, then select the rom slot you want to boot, then select "SDCard" as default. Then Click Yes to flash a dualboot kernel, pick a kernel you want (make sure it's compatible with the rom you want to boot). [B]Now Reboot[/B], and the phone should boot into a rom on SDCard.
[SIZE="5"][COLOR="Blue"][URL="http://www.youtube.com/watch?v=B6JU08mONHY"][COLOR="Blue"]Video Tutorial[/COLOR][/URL][/COLOR][/SIZE] - thanks to ashwin123
[media=youtube]B6JU08mONHY[/media]
[url]http://www.youtube.com/watch?v=B6JU08mONHY[/url]
Version 1.6 - [url]http://www.mediafire.com/?d7bs7srsecwgm16[/url]
- Added Notecore 14.1 kernel
- Added Goku v1.5-11 kernel - thanks to funky81 for the kernel source. This is a very good kernel that supports both CM9 & TW. Now you can dual boot CM9 and TW with this kernel. Keep press/unpress the Home button at boot to switch the rom.
- Added Wipe Tools for the rom on SD Card
- Added Mount partition Tool for the rom on SD Card. This allows you to directly flash a rom or mod on the rom on SD Card. Now you can easily flash a new rom on SD Card, [COLOR="Red"]but be careful if you want to use this tool to flash CM9/CM10 roms. There's a format command there, you need to take out before flashing those roms.[/COLOR]
- Some fixes for the Tools sections.
Version 1.5 [url]http://www.mediafire.com/?1493p91bg7z56nk[/url]
-Fixed the CM10 kernel flashing issue.
-Added NoteCore v13-4
Version 1.3 [url]http://www.mediafire.com/?3c06hnon548hhh2[/url]
-Added NoteCore v13
Version 1.2 [url]http://www.mediafire.com/?9z0uzof8b532bzb[/url]
-Fixed flashing error in version 1.1
Version 1.1
- Added Kernel backup/restore options
- Added share data options too.
Version 1.0 [url]http://www.mediafire.com/?b2i954vve1gh1c4[/url]
-Initial Aroma version
-----------Old Method---------------------------------------------------------------------------------------------------------------
1. Backup your current rom and your data just in case something goes wrong and you can recover your data. You can skip this step if you don't need to save anything.
2. Flash any rom you want like you've been doing. This rom will be a rom on your internal SD Card. Just follow the guild from Dev's of the rom you want to flash. Be careful about EMMC brick, please don't wipe using an unsafe kernel. (Skip this step if you want your current rom to be the rom on your SD Card)
Some roms don't auto get root, so just to be sure you can flash this [URL="http://www.mediafire.com/?8adhwsporsdd61w"]CWM-SuperSU-v0.95.zip[/URL]
3. Copy rom partition to internal SD Card. You can do it partially or all by flashing the following scripts.
- [URL="http://www.mediafire.com/download.php?te8soummj0b9iqv"]copy_rom_to_sdcard_system.zip[/URL] - copy system partition to SD Card. ([COLOR="Blue"]recommend flashing this only[/COLOR])
- [URL="http://www.mediafire.com/download.php?4c6de3h1e8hx4po"]copy_rom_to_sdcard_data.zip[/URL] - copy data partition to SD Card. ([COLOR="Red"]not recommended[/COLOR] unless you want to copy your current apps & data to SD card and want to restore back from the rom on SD card later)
- [URL="http://www.mediafire.com/download.php?vb5l6nc8qr4qlno"]copy_rom_to_sdcard_cache.zip[/URL] - copy cache partition to SD Card. [COLOR="Red"](not recommended[/COLOR], another script will take care of this)
- [URL="http://www.mediafire.com/download.php?dvapmhow79pe1v0"]copy_rom_to_sdcard_all.zip[/URL] - copy all rom partitions to SD Card. ([COLOR="Red"]not recommended[/COLOR], take long time to do)
4. Flash [URL="http://www.mediafire.com/download.php?7q8ml0muqhh930m"]sd_internal_rom1_wipe_data_cache.zip[/URL] to setup a blank data.img and cache.img for the rom on SD card. (only flash this if you didn't flash the above copy_rom_to_sdcard_data.zip and copy_rom_to_sdcard_cache.zip, or copy_rom_to_sdcard_all.zip)
5. Setup the config file for your rom on SD card.
- Flash [URL="http://www.mediafire.com/download.php?x1jsiec6c7g78qk"]sd_rom_config_setup_3.2b_default_phoneRom.zip[/URL] to setup the config file for the SD Rom and boot your phone rom as default.
- Or Flash [URL="http://www.mediafire.com/download.php?318jat6mkpjjec5"]sd_rom_config_setup_3.2b_default_sdcardRom.zip[/URL] to setup the config file for the SD Rom and boot your rom on the SD Card as default.
[COLOR="Blue"] Remember: if the phoneRom and the sdcardRom are the same base, or same platform (CM9, or ICS, or GB). You can switch the rom by keep press/unpress the home button at boot. [/COLOR]
6. Flash dual boot support kernel to boot the rom on the sdcard. You can flash one of the flowing compatible kernels.
[COLOR="Red"]Remember: Do not flash the CM9 kernel to boot the Samsung ICS rom and versus [/COLOR]
- GL_NOTECORE_V11_dual.zip [URL="http://www.mediafire.com/?dxdaqig1d060nru"]Standard[/URL] / [URL="http://www.mediafire.com/?jbaado5xacmx7fw"]OC[/URL] - Thanks to g.lewarne
- [URL="http://www.mediafire.com/?wf1mfqb2q7wtfrb"]dualboot3.2b_speedmod-ics-k3-11.zip [/URL] - Speedmod K3-11 with dual boot support for Samsung ICS roms only, set ro.secure=0 for fully adb root - Thanks to Hardcore
- [URL="http://www.mediafire.com/download.php?60lt63qtvfqcs6b"]GL_NOTECORE_V8.1_dual.zip[/URL] - GL NOTECORE v8.1 with dual boot support for Samsung ICS roms only - Thanks to g.lewarne
- [URL="http://www.mediafire.com/?cdoj67xoqgk82j3"]dualboot3.2_speedmod-ics-k3-9.zip[/URL] - SpeedMod 3-9 with dual boot support for Samsung ICS roms only. - Thanks to Hardcore
- [URL="http://forum.xda-developers.com/showthread.php?t=1710937"]GoKu Kernel 1.4[/URL] - I have not tested this myself, but the change log says dual boot support. - Thanks to funky81.
- [URL="http://www.mediafire.com/?da4cuozus6tdlv3"]cm10_kernel_dual_new.zip[/URL] - CM10 kernel from PARANOIDANDROID v1.2 - thanks to imilka. Note: This kernel also works with the Samsung ICS rom except Wifi and Bluetooth issue. Hope someone can fix it.
- [URL="http://www.mediafire.com/?gkgvl950d38ka9c"]cm9_stock_kernel_dualboot.zip[/URL] - stock CM9 kernel with dual boot support for CM9 roms only. - Thanks to CM9 team
7. Reboot and test the rom on your SD Card. Make sure you test both roms on the SD Card and your phone to make sure they are working.
8. Once you are able to boot the rom on the SD Card, You can now restore your old rom, or flash any new rom you want.
Remember: If my dual boot kernel doesn't support your new rom, you need to flash my dual boot support kernel to boot the rom on SD card, and you need to flash a compatible kernel with your phone rom to boot your phone rom back.
Please note that my current kernels with dual boot support work with Samsung ICS or CM9 roms. I have not tested them with any GB rom yet, so be careful when you flash them on a GB rom or a different platform rom.
[SIZE="5"][COLOR="Blue"][URL="http://www.youtube.com/watch?v=c9UnqqaPdvo"][COLOR="Blue"]Video Tutorial[/COLOR][/URL][/COLOR][/SIZE] - thanks to ashwin123
[media=youtube]c9UnqqaPdvo[/media]
[url]http://www.youtube.com/watch?v=c9UnqqaPdvo[/url]
[SIZE="4"][COLOR="Blue"]Aug 09-12[/COLOR][/SIZE]
- First Aroma version support 2 roms on internal SDcard and 3 roms on external SDCard.
- Add GL NoteCore V12
- Add TMT MIUI kernel
Download link: [url]http://www.mediafire.com/?b2i954vve1gh1c4[/url]
July 30-12
- Add new SpeedMod K3-11 with dual boot support and fully adb root.
- Add Video tutorial - thanks to ashwin123
July-28-12
- Add new kernel GL NOTECORE V8.1 with dual boot support [url]http://www.mediafire.com/?60lt63qtvfqcs6b[/url]
- Preinstalled Liquid_Black_V 3.2 - [url]https://docs.google.com/open?id=0BwDBny0G97K5Z1FuMnh0M2otVG8[/url]
July-26-12
- Add new kernel GL NOTECORE V8 with dual boot support [URL="http://www.mediafire.com/?6p5wapyps7q5qe8"]download link[/URL]
- Re-word the instructions. Much simple and faster to set-up.
Version 3.2
- Updated to SpeedMod-K3-9 source
- Optimized booting time - (about 6 seconds faster than original SpeedMod-K3-9)
- Add feature to safely share data partition if the two roms are the same base but different mod/theme.
- Update SD Rom by extracting system and data folder to /sdcard/SDRoms/update/ - experiment (report if it works for you)
Version 3.1:
- Add feature to put the update.zip in the /sdcard/SDRoms/update/ folder for flashing a mod/theme on the SD Rom.
- Create a file "wipe_dalvik-cache" file in the /sdcard/SDRoms/update/ folder to wipe dalvik-cache on the SD Rom. (simple and fast)
or simply flash this [url]http://www.mediafire.com/?690wyv2zt5j7185[/url] ro wipe dalvik-cache on the SD Rom.
Version 3:
- Updated to SpeedMod-K3-7 source
- Add script to wipe data & cache for rom1 on SD Card. You can also save 1.1 GB space with this. This contains empty data and cache partition images and extract them on your SD Card. You can also save a lot of time & space by simply copy the system to sd card, and then flash sd_internal_rom1_wipe_data_cache.zip
Version 2:
- Updated to SpeedMod-K3-6 source
- Add default rom value in bootsdrom.cfg. Now you can set default rom (phone or sdrom) by changing the default value in the config file.
- Add CMW restore scripts to restore sdrom back to phone rom.
- Some minor tweaks.
Version 1:
- Initial release
- Fix the mounting bug (swaping external and internal sd card) - Kernel/CWM

Could you make an app?
It would be easy to make some $.

Not right now, this requires some kernel modification which is not easy to do in an application. The app may help to flash the rom on SD card faster and easier, but can't change the kernel itself.
hi1 said:
It would be easy to make some $.
Click to expand...
Click to collapse

Good luck for this project
Will try it out sometime...

Nice concept.. I always want to have dual boot for Samsung and AOSP/CM based ROM... But now, wait until we see a one-for-all kernel like siyah to be developed for our Notes..

Wow ! Waiting for such a thing !
Will install it and see ....

How can I delete the Rom on SD again, if I don´t want it anymore?
And to be sure the SD means the external SD.
thanks for answer
Edit: sorry to say, but ur links are 404 Error, can´t download anything

Just delete the SDRoms folder on your internal SD card. SD means internal SD. You can move it to external SD by changing the bootsdrom.cfg values.
hara74 said:
How can I delete the Rom on SD again, if I don´t want it anymore?
And to be sure the SD means the external SD.
thanks for answer
Edit: sorry to say, but ur links are 404 Error, can´t download anything
Click to expand...
Click to collapse
Sent from my GT-N7000 using Tapatalk 2

chuandinh said:
Just delete the SDRoms folder on your internal SD card. SD means internal SD. You can move it to external SD by changing the bootsdrom.cfg values.
Click to expand...
Click to collapse
With changing that value, is it possible to get triple boot?
I imagine to have:
- CM/AOKP in the main ROM
- custom ROM based on TW on internal SD
- official ROM on external SD.

Download link
http://www.mediafire.com/download.php?xc03yg1wjjzziys

I would give it a try if the download links would work
and thanks for the quick answer
I think it´s really cool to have two Roms on our Note to play with
Edit: too late, first Link is back again

CM/AOKP is not supported right now.
Here is an example of the values in the bootsdrom.cfg file
rom=/sdmnt/SDRoms/rom1
system=/sdmnt/SDRoms/rom1/system.img
data=/sdmnt/SDRoms/rom1/data.img
cache=/sdmnt/SDRoms/rom1/cache.img
After you are done copy rom to SD card, you can rename the rom1 to rom2 in the SDRoms folder. Then change the values in the config file like this
rom=/sdmnt/SDRoms/rom2
system=/sdmnt/SDRoms/rom2/system.img
data=/sdmnt/SDRoms/rom2/data.img
cache=/sdmnt/SDRoms/rom2/cache.img
If you want to use external SD instead.
Copy the SDRoms folder to your external SD
then change the config file values like this. sdmnt1 means external SD.
rom=/sdmnt1/SDRoms/rom1
system=/sdmnt1/SDRoms/rom1/system.img
data=/sdmnt1/SDRoms/rom1/data.img
cache=/sdmnt1/SDRoms/rom1/cache.img
mbudh said:
With changing that value, is it possible to get triple boot?
I imagine to have:
- CM/AOKP in the main ROM
- custom ROM based on TW on internal SD
- official ROM on external SD.
Click to expand...
Click to collapse

is there a way to change that it boot normally the phone Rom and press home button only if I want to boot the SD Rom?

Wait for my next update
Sent from my GT-N7000 using Tapatalk 2

I tried the setup.zip but the is no bootsdrom.cfg file in SD Rom folder
I tried it twice.
so I cannot boot the SD Rom
any suggestions?
no root! for phone Rom
for first problem I copied over the bootsdrom.cfg in the folder and it works,
booted the SD Rom and it has still root
but now I can´t boot Phone Rom with holding Homebutton
now I can switch between the Roms by rename bootsdrom.cfg to .bak
but it always been optimizing the apps when switch the Roms
I get root back for the Phone Rom :laugh:

I get it nearly all to work :laugh:
only things are that the homebutten at booting doesn´t work, have to rename the bootsdrom.cfg into .bak for booting phone rom
and
the optimizing all apps at switch between the roms
but therefor it´s REALLY cool and I THANK YOU again for your GREAT WORK :good:
I always searched for a thing like this

Really great work
Looking forward ti seeing you porting it to cm9 kernel
Sent from my GT-N7000 using xda premium

a few little things that I noticed:
- after each switch I have to decide which Home Launcher I want to use
- the widgets I place on Nova Launcher are the same on both Roms, so I guess if I use the same Launcher I can´t use different Widgets by default
- the Icon Quickpanel Settings is shown in one Rom but in the other Rom the Icon is shown as not installed, so I have to put it again from app drawer to the homescreen
- and I tried to copy the files from sd_rom_setup into the right folders so that the homebutton work, but it doesn´t work

realy great job mister...
will learn how to implement..
now i can put also switch my fav rom... albafinalstage n cassie 4.5 slim :thumbup:

[PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ-cwm6 - Safe Stock Based Kernel
Featuring PhilZ Touch 6
(Enhanced CWM v6.x, now with exFat+ext4 support)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
​< init.d, customboot, dual USB mount in recovery >​< root, adb root, multiboot anim >​
<<< Official up to date thread >>>
<<< Download links + instructions in POST 3 >>>​
Kernel Features:
Patched kernel to avoid brick bug issues on ICS 4.0.4
PhilZ Touch Recovery: enhanced clockworkmod 6 full touch based recovery
Pure stock kernel (only ramdisk changes)
Can be flashed in Stock Recovery (root + no yellow triangle) or in Odin
Init.d and customboot.sh support
Introduced support for custom MULTI bootanimation (bin and zip)
Dual USB mount in recovery support
ADB root in recovery: just wait about a minute to activate
Click to expand...
Click to collapse
PhilZ Touch Features: Read POST 2 for instructions to use special functions like aroma and ors support
touch interface:- toggle between 4 touch modes: FULL TOUCH, DOUBLE TAP to validate and SEMI TOUCH (scroll but no touch validation) and NO TOUCH to only use hardware keys
- written from scratch full touch code
- safe full touch : no wrongly validations while scrolling
- when you set full touch mode, it defaults to optimized settings for menu height, scroll sensitivity and touch accuracy (you still can alter them manually later)
- adjust scroll sensitivity in a huge palette
- adjust menu height in a huge palette
- adjust touch accuracy
- 30 color settings for each of the 8 GUI parts + 5 alpha transparency settings
- user custom background png can be selected in addition to 30 solid colors option
- show / hide background icon
- show / hide bottom virtual buttons
- show/hide + set color and transparency for menu line separators to match solid color themes, like Black...
- set number of bottom log rows to show
- Friendly Log View and pause on logs: no more miss logs during zip installs
- auto dim screen after user configurable delay
- auto turn off screen after user configurable delay
- adjust brightness and turn off screen with a gesture action
- show/hide clock and remaining battery %, even during nandroid operations
- clock and battery stats now effectively refresh every 30 seconds and during nandroid operations
- toggle vibrator on/off on touch
- toggle key repeat for volume up/down scrolling when maintained pressed
- key repeat also enabled for virtual buttons
- set time zone + 30mn offset + DST: correct time can now be set for nandroid backup path and clock
- time setting is now applied to all recovery session, including timestamp of created/modified files (v4.92.3+)
- capture recovery screen shots with a gesture action
- one file to save all settings
- backup and restore settings file
- reset to default settings option
- prompt to restore your settings from a backup when they are wiped by a new ROM install
- option to auto restore your settings from a backup without a prompt
- all toggles are applied live, without restart of recovery (except reset of stock CWM background image)
- toggle menu options are automatically right aligned and menu text left aligned based on device display size
- configurable gesture actions: double tap, slide right/left, long press/lift, long press/move, can be associated with any of: show log, change brightness, blank screen, capture screen shot, launch Aroma File Manager​Note: after scroll, first touch will select only. After one sec of scrolling or on second touch, it will validate immeadiately. This is by design and not a bug. It is there to limit erroneous validation while scrolling
Read more about it here: Validation Lock after scrolling
First to introduce true JB 4.2 migration: toggle between /data/media and /data/media/0
browse phone with root access using full GUI in Aroma File Manager
terminal access from recovery with root access through Aroma File Manager
Multi Zip Install menu: check multiple zip files to install in a row
Custom Install Zip Mode: set a default folder to start with + browse backward up to the root
exFAT + ext4 support in recovery for external sd
TWRP backup and restore support, include full md5 sum support (single and multivolume, compressed and non compressed formats)
Advanced statistics during backup operations shown in color: total backup size, backup size progress, backup time, compression ratio...
support .android_secure backup/restore from external storage and exfat partitions
optional reboot after custom backups/restores
sd-ext support (ext4)
nandroid backups support /preload in backup and restore jobs (custom and stock modes)
nandroid backups support /misc in backup and restore jobs (custom mode)
set special nandroid settings: time zone, toggle md5 check for lightning fast backup and restore, toggle /preload backup and restore, enable nandroid compression using pigz (multi-cpu gzip compression) and choose ors backup target volume
you can cancel any nandroid operation with back button
create custom_rom.zip from current ROM or from a pre-existing nandroid backup (based on boot, /system and optionally /preload)
nandroid backup path now will be named with current ROM id from build.prop (ro.modversion, then ro.romversion, then ro.build.display.id)
custom backup and restore job list: backup and restore freely any partition combo (include modem and efs) from old nandroid folder or new custom_backup one
backup/restore EFS in both tar + img formats, now with time incremented copies for both tar and .img
support flash modem.bin image files in addition to custom modem.img files, now support for multiple *.bin versions under dedicated folder
during custom restore, you can see the contents of the folder you want to restore from
delete custom or TWRP backups from recovery menu
full wipe before flashing new ROM: wipe user data + format /system and /preload. SD card content is not affected
full support for openrecovery script specifications include all backup and restore options
run openrecovery scripts in 2 modes: on start goomanager boot scripts + one touch menu to either directly open a default path or freely browse for scripts
define ors backup target volume from within Nandroid Settings menu
ors restore path supports stock clockworkmod path, TWRP path and custom_backup path
poweroff, reboot to recovery and reboot to download/bootloader mode options
dual USB mount in recovery support and mount external sd over usb for /data/media devices
adb root in recovery: just wait about a minute to activate
detailed build info in About menu
Click to expand...
Click to collapse
Video Teaser:
new update soon...
Main menu and PhilZ Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GUI Preferences: all is applied live (no reboot). Up to 14 menu height settings, scroll sensitivity, touch accuracy...
27 color settings + 5 alpha transparency levels for every GUI element
Change background image with a custom png (of your device resolution), a solid color (27 presets) or revert to original cwm image
User configurable touch gestures (feel free to request for new actions)
Setup your time-zone + 30mn offset, super wipe option to install a new ROM
Backup and Restore any partition in a complete freedom, include modem (.img + .bin) and efs (.img + .tar)
Custom backups can also be restored by original CWM Advanced Restore Menu
TWRP Backup and Restore Support + md5 + single/multivolume format
Support multi-cpu compression, md5 check toggle and custom .android_secure path
Choose ors backup volume target
Flash multiple zip files in a raw
Aroma File Manager + Terminal Emulator: launch with a gesture action (double tap is default)
Full Wipe to Install a new ROM (sdcard is preserved)
Free Browse Mode to install zip files: select a default folder to start with and browse up to the root
Enjoy, and do not hesitate to post feedbacks and comments

What kernel to choose:
The important part is the Kernel code:
XWLPX-NEE
Kernel code is in red (LPX), for this example, you need an LPX ROM. However, often, you can mix kernels when they are close: LPF kernel with LPG ROM...
NEE code doesn't matter at all, I add it for reference. It is the CSC
XW: mixed, often doesn't matter for close regions. For example, XW and XX are often interchangeable. However, mixing a BU with an XW ROM or inversly, sometimes works, but often ends in a bootloop. In that case, either boot into recovery or download mode to reflash
Using the new MULTI-bootanimation feature ** v2.5 and later **
This is an original feature I introduced. Now you can put all your bootanimations on the phone. On each boot, it will play a different animation from your list.
If you do not install any bootanimation, the stock Samsung animation will play. Also, you can go with the old method of putting only one bootanimation.zip(bin) and it will play only that one. If you decide to go through the MULTI-bootanimations looper, follow below instructions:
name your bootanimations as follow: bootanimation1.zip(bin), bootanimation2.zip(bin)... bootanimationN.zip(bin)
put the zip files in "/data/local" or in "/system/media" folder. The bin animations must go into "/data/local"
reboot, and now, on each boot, it will magically scroll through your animations
priority is to "/data/local/bootanimation*.bin", then "/data/local/bootanimation*.zip" and finally "/system/media/bootanimation*.zip"
info: animation number to play on next boot is stored in "/data/local/bootanimation-loop.txt". If you delete some animations, you should also delete the "bootanimation-loop.txt". It will be reset on next boot. If not, stock Samsung anim could play if loop.txt contains a bigger number than your actual files. In that case, your playlist will be ignored until you delete the loop txt file.
FAQ
These are the top 5 posted questions
Can you implement overclock, voltage control, voodoo, special drivers... ?
This is a stock kernel, not recompiled from source. It is only repacked with changes in ramdisk to add new features and an enhanced cwm based recovery. I do not have plans to start building kernels from source. There are big names in the scene already doing a great job there.
Why I can't see your kernel version Phone / About dialog ?
That's how stock kernels behave. Version info is in build.prop and comes with the ROM. I can add it but won't as it is that way that stock kernels are supposed to work.
You can know the exact kernel version by typing in terminal: getprop
Also, in my recovery, there is an About dialog to give you more info about actual recovery which is also tight to kernel
Why your kernel drains more battery ?
It cannot be. It will act like stock kernel, not better, not worst
Does your kernel perform better than stock ?
Same answer as previous
Why sometimes I need to touch twice to validate an option in recovery ?
This is by design and not a bug. A special feature I added is the option to highlight/validate touched menu. After you scroll in a menu, your first touch will act as select without validation. This is to avoid any false validation during scroll, the worst limitation for many of the actual touch recoveries including original one
Will you implement exFAT support in recovery ?
It is done now, but only for JB as it supports exFat
Click to expand...
Click to collapse
You found a bug and want to report it:
Before posting about bugs concerning bootloops, kernel not working or recovery issues, please keep this in mind:
this is a pure stock kernel, kernel is just same as stock, except binary patching MMC_CAP_ERASE
if you have issues such as bootloop, first, try to flash the original stock zImage to see if you still have same issues as with my kernel
some custom kernels do not update your build.prop, it is the case with my kernel, as it is a stock kernel. I can add it, but won't for many specific reasons. You can flash a LR9 kernel on a LRT ROM, you will still see LRT in your phone/about. That's also true if you flash a Samsung genuine kernel on a different ROM. So, if you flashed many kernels before, be sure to know on what ROM you are and check potential compatibility issues between kernels in post 2
Click to expand...
Click to collapse
Before asking for support:
Make sure your issue is recovery related
All external sdcard issues: first format in PC with primary partition, tons of people are formatting as logical and come cry
Reproduce your issue and while in recovery:
Go to Advanced / Report Error
Copy the /sdcard/clockworkmod/recovery.log and attach it here
Give detailed info about your issues
Without these, there is little chance I can help you, so, do not get mad if I do not answer
Click to expand...
Click to collapse

Recovery (.zip) packages instructions - Will also root your phone * recommanded method *
They come in the form of -signed.zip files that can be flashed in stock recovery 3e: No Yellow Triangle
Download xxx-signed.zip kernel matching your ROM
Put the previously downloaded xxx-signed.zip file on your external sd card
Boot into stock recovery (volume up+home+power)
Select "apply update from external storage".
Now select the xxx-signed.zip file you copied in previous step
You are rooted + new PhilZ-cwm6 kernel with CWM6
Odin packages instructions: ready for root
They come in the form of .tar.md5 file
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
to root, download the root file from here (Method 1) : http://forum.xda-developers.com/showthread.php?t=1746794
<< Posting direct links to below files is not allowed. Please post links to this thread/post instead >>​Download Links
<< Boot animation samples >>
- Simplistic ROM boot animation
- AOKP boot animation
download one of the two bootanimations (the simplistic one is worth it)
extract the rar contents : bootanimation.zip file, do not extract the zip file
put the bootanimation.zip file in your /system/media or /data/local folder
on reboot, you get the new animation.
to reset to samsung animation, just delete the bootanimation.zip
< The ZIP version is rooted and can be flashed in stock recovery without yellow triangle >
Note: you can skip superuser installation when flashing using a config file: read this post to know how to use it
<< Latest versions always here: >>
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
older:
cm only: http://d-h.st/users/philz_touch/?fld_id=29125#files
tw only: http://d-h.st/users/philz_touch/?fld_id=16061#files
<< 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT6 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop)
http://d-h.st/users/philz_touch/?fld_id=16061#files
<< 12.05.2013 - PhilZ-cwm6 v5.03.0 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop)
http://d-h.st/users/philz_touch/?fld_id=16061#files
<< 05.05.2013 - PhilZ-cwm6 v5.00.4 with CWM 6.0.3.1 based recovery >>
DDLSC - DXLSE - JPLSB - XXLSZ - XXLT4 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix)
Download folder
DevHost Mirror
<< 21.04.2013 - PhilZ-cwm6 v4.93.6 with CWM 6.0.3.1 based recovery >>
DDLSC - DXLSE - JPLSB - XXLSZ - XXLT4 - ZSLO2 Fixed for bootloop
Download folder
ZCLSF not bootloop fix
Download folder
<< 17.04.2013 - PhilZ-cwm6 v4.93.6 with CWM 6.0.3.1 based recovery >>
DDLSC - DXLSE - JPLSB - XXLSZ - ZSLO2
N7000 PhilZ Touch v4.93.6 Folder
<< 27.03.2013 - PhilZ-cwm6 v4.91.2 with CWM 6.0.3.0 based recovery >>
ZSLO2-OZS
http://www.mediafire.com/file/g719655kl973clx/PhilZ-cwm6-ZSLO2-OZS-4.91.2-signed.zip
http://www.mediafire.com/file/bv7cqn2vwxp8rr7/PhilZ-cwm6-ZSLO2-OZS-4.91.2.tar.md5
DXLSE-OLB
http://www.mediafire.com/file/aujqazin86cd39j/PhilZ-cwm6-DXLSE-OLB-4.91.2-signed.zip
http://www.mediafire.com/file/ab25nn7nt00wno1/PhilZ-cwm6-DXLSE-OLB-4.91.2.tar.md5
ZCLSF-CHN
http://www.mediafire.com/file/bzezf791wdnq6xt/PhilZ-cwm6-ZCLSF-CHN-4.91.2-signed.zip
http://www.mediafire.com/file/1phbyqmvf8dmm16/PhilZ-cwm6-ZCLSF-CHN-4.91.2.tar.md5
<< 22.03.2013 - PhilZ-cwm6 v4.90.8 with CWM 6.0.3.0 based recovery >>
DDLSC-ODD
http://www.mediafire.com/file/s3qyapd726vw528/PhilZ-cwm6-DDLSC-ODD-4.90.8-signed.zip
http://www.mediafire.com/file/bo3jilufmte3tcd/PhilZ-cwm6-DDLSC-ODD-4.90.8.tar.md5
XXLSZ-OXA
http://www.mediafire.com/file/o55v8ol5xh371zz/PhilZ-cwm6-XXLSZ-OXA-4.90.8-signed.zip
http://www.mediafire.com/file/ij4z5omlzy44ymy/PhilZ-cwm6-XXLSZ-OXA-4.90.8.tar.md5
<< 17.03.2013 - PhilZ-cwm6 v4.89.4 with CWM 6.0.2.9 based recovery >>
JPLSB-UAE
http://www.mediafire.com/file/dbjncxnkmawnpqk/PhilZ-cwm6-JPLSB-UAE-4.89.4-signed.zip
http://www.mediafire.com/file/g7m75kh360urw7h/PhilZ-cwm6-JPLSB-UAE-4.89.4.tar.md5
ZCLSF-CHN (original init binary kept)
http://www.mediafire.com/file/g6hx252djrja6l9/PhilZ-cwm6-ZCLSF-CHN-4.89.4-signed.zip
http://www.mediafire.com/file/f7x8cz4mozl78zy/PhilZ-cwm6-ZCLSF-CHN-4.89.4.tar.md5
UBLSF-UUB
http://www.mediafire.com/file/7wizpv22x0ingdt/PhilZ-cwm6-UBLSF-UUB-4.89.4-signed.zip
http://www.mediafire.com/file/s3dm07v5unff2d7/PhilZ-cwm6-UBLSF-UUB-4.89.4.tar.md5
XXLSZ-OXA
http://www.mediafire.com/file/tt2c07hfdbaoisa/PhilZ-cwm6-XXLSZ-OXA-4.89.4-signed.zip
http://www.mediafire.com/file/mvnl1khvcqkj830/PhilZ-cwm6-XXLSZ-OXA-4.89.4.tar.md5
ZSLM5-OZS
http://www.mediafire.com/file/em448889h4i3i8i/PhilZ-cwm6-ZSLM5-OZS-4.89.4-signed.zip
http://www.mediafire.com/file/ezlnvjgv7u37p9x/PhilZ-cwm6-ZSLM5-OZS-4.89.4.tar.md5
<< 13.03.2013 - PhilZ-cwm6 v4.88.2 with CWM 6.0.2.9 based recovery >>
ZCLSF-CHN (fixed for bootloop)
http://www.mediafire.com/file/nutltlvm694xcce/PhilZ-cwm6-ZCLSF-CHN-4.88.2-signed.zip
http://www.mediafire.com/file/e3j4mbdq2am4nx4/PhilZ-cwm6-ZCLSF-CHN-4.88.2.tar.md5
UBLSF-UUB (fixed for bootloop)
http://www.mediafire.com/file/vmaouvua53vl9ru/PhilZ-cwm6-UBLSF-UUB-4.88.2-signed.zip
http://www.mediafire.com/file/c95ceaa7r17zdok/PhilZ-cwm6-UBLSF-UUB-4.88.2.tar.md5
XXLSZ-OXA (fixed for bootloop)
http://www.mediafire.com/file/g9us9537wtkcfqb/PhilZ-cwm6-XXLSZ-OXA-4.88.2-signed.zip
http://www.mediafire.com/file/t1r39auhz2tegtf/PhilZ-cwm6-XXLSZ-OXA-4.88.2.tar.md5
<< 07.03.2013 - PhilZ-cwm6 v4.87.6 with CWM 6.0.2.8 based recovery >>
UBLSF-UBB (fixed for bootloop)
http://www.mediafire.com/file/7zz830tprqzh5ar/PhilZ-cwm6-UBLSF-UBB-4.87.6-signed.zip
http://www.mediafire.com/file/sow56kip3qg9495/PhilZ-cwm6-UBLSF-UBB-4.87.6.tar.md5
XXLSZ-OXA (fixed for bootloop)
http://www.mediafire.com/file/jx7clqdmvtvd63y/PhilZ-cwm6-XXLSZ-OXA-4.87.6-signed.zip
http://www.mediafire.com/file/gm2rag3brbzjwna/PhilZ-cwm6-XXLSZ-OXA-4.87.6.tar.md5
<< 21.02.2013 - PhilZ-cwm6 v4.63 with CWM 6.0.2.8 based recovery >>
XXLSZ-OXA
http://www.mediafire.com/file/6bxp34p353tf8ob/PhilZ-cwm6-XXLSZ-OXA-4.63-signed.zip
http://www.mediafire.com/file/gup52876ps7j4gb/PhilZ-cwm6-XXLSZ-OXA-4.63.tar.md5
<< 12.02.2013 - PhilZ-cwm6 v4.35 with CWM 6.0.2.8 based recovery >>
XXLSZ-OXA
http://www.mediafire.com/file/rj9tpyclwcchjz7/PhilZ-cwm6-XXLSZ-OXA-4.35-signed.zip
http://www.mediafire.com/file/76bf6bp2k9l9c6l/PhilZ-cwm6-XXLSZ-OXA-4.35.tar.md5
ZCLSE-CHN
http://www.mediafire.com/file/a4xyljgcm9daajm/PhilZ-cwm6-ZCLSE-CHN-4.35-signed.zip
http://www.mediafire.com/file/t37f1zfxeeziyng/PhilZ-cwm6-ZCLSE-CHN-4.35.tar.md5
ZCLSD-CHN
http://www.mediafire.com/file/ygqyds3r36q7zr8/PhilZ-cwm6-ZCLSD-CHN-4.35-signed.zip
http://www.mediafire.com/file/aovmmdil8w7acbo/PhilZ-cwm6-ZCLSD-CHN-4.35.tar.md5
ZSLM5-OZS
http://www.mediafire.com/file/ad7fze2wx7m4wi0/PhilZ-cwm6-ZSLM5-OZS-4.35-signed.zip
http://www.mediafire.com/file/hayib7ay0cj1y02/PhilZ-cwm6-ZSLM5-OZS-4.35.tar.md5
XXLSC-XJB
http://www.mediafire.com/file/fe9ni69638k6co4/PhilZ-cwm6-XXLSC-XJB-4.35-signed.zip
http://www.mediafire.com/file/gwldn65brak13sc/PhilZ-cwm6-XXLSC-XJB-4.35.tar.md5
UBLS4-TCE
http://www.mediafire.com/file/5o5dpx5lcxfmot4/PhilZ-cwm6-UBLS4-TCE-4.35-signed.zip
http://www.mediafire.com/file/y4mya8d9m9aqy1u/PhilZ-cwm6-UBLS4-TCE-4.35.tar.md5
<< 03.01.2013 - PhilZ-cwm6 v3.99 with CWM 6.0.2.7 based recovery >>
Jelly Bean Leaks:
PhilZ-cwm6-ZCLSC-CHN-v3.99
http://www.mediafire.com/file/f4qm997jlryoix0/PhilZ-cwm6-ZCLSC-CHN-3.99-signed.zip
http://www.mediafire.com/file/dx3lz7ucw53qjxq/PhilZ-cwm6-ZCLSC-CHN-3.99.tar.md5
PhilZ-cwm6-ZCLS8-CHN-v3.99
http://www.mediafire.com/file/4az6rl5n06lzg6c/PhilZ-cwm6-ZCLS8-CHN-3.99-signed.zip
http://www.mediafire.com/file/qvh35rabmaiv23b/PhilZ-cwm6-ZCLS8-CHN-3.99.tar.md5
PhilZ-cwm6-ZCLSB-CHN-v3.99
http://www.mediafire.com/file/c16wh6ickc3adq1/PhilZ-cwm6-ZCLSB-CHN-3.99-signed.zip
http://www.mediafire.com/file/tmwbfulbqvb305w/PhilZ-cwm6-ZCLSB-CHN-3.99.tar.md5
PhilZ-cwm6-XXLSC-XJB-v3.99
http://www.mediafire.com/file/8rxgnjnr8tu4ye6/PhilZ-cwm6-XXLSC-XJB-3.99-signed.zip
http://www.mediafire.com/file/9wp1x135i1d33vu/PhilZ-cwm6-XXLSC-XJB-3.99.tar.md5
PhilZ-cwm6-XXLSA-DBT-v3.99
http://www.mediafire.com/file/qw3ajr81qe0q5eo/PhilZ-cwm6-XXLSA-DBT-3.99-signed.zip
http://www.mediafire.com/file/wxqlp64nu6s7v66/PhilZ-cwm6-XXLSA-DBT-3.99.tar.md5
PhilZ-cwm6-UBLS4-TCE-v3.99
http://www.mediafire.com/file/f95w5w15a5ovqq2/PhilZ-cwm6-UBLS4-TCE-3.99-signed.zip
http://www.mediafire.com/file/o4yhqnt3gm6tk88/PhilZ-cwm6-UBLS4-TCE-3.99.tar.md5
Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:
http://www.mediafire.com/?3ale6m9q6b6a3
Updated kernels list:
PhilZ-cwm6-BULR1-SWC-v3.99
PhilZ-cwm6-DDLR6-ODD-v3.99
PhilZ-cwm6-DDLR9-INU-v3.99
PhilZ-cwm6-DDLRB-ODD-v3.99
PhilZ-cwm6-DXLP9-OLB-v3.99
PhilZ-cwm6-DXLR2-OLB-v3.99
PhilZ-cwm6-DXLR5-OLB-v3.99
PhilZ-cwm6-JPLPD-OJP-v3.99
PhilZ-cwm6-JPLR8-OJP-v3.99
PhilZ-cwm6-UBLPC-UUB-v3.99
PhilZ-cwm6-UBLR3-PSN-v3.99
PhilZ-cwm6-UBLR5-TCE-v3.99
PhilZ-cwm6-XXLPY-XEN-v3.99
PhilZ-cwm6-XXLQ3-OXX-v3.99
PhilZ-cwm6-XXLRG-DBT-v3.99
PhilZ-cwm6-XXLRI-AUT-v3.99
PhilZ-cwm6-XXLRK-XEU-v3.99
PhilZ-cwm6-XXLRL-HUI-v3.99
PhilZ-cwm6-XXLRQ-DBT-v3.99
PhilZ-cwm6-XXLRT-DBT-v3.99
PhilZ-cwm6-XXLRU-VDI-v3.99
PhilZ-cwm6-XXLRW-SFR-v3.99
PhilZ-cwm6-ZSLPF-OZS-v3.99
PhilZ-cwm6-ZSLPM-OZS-v3.99
PhilZ-cwm6-ZSLPN-OZS-v3.99
<< 07 oct 2012 - PhilZ-cwm6 v2.7 with Touch based enhanced recovery >>
< Update to touch recovery v1.15 >
** New kernels on 01.11.2012: DXLR2
PhilZ-cwm6-XXLS2-XJB-v2.7 Jelly Bean LEAK
http://www.mediafire.com/file/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
http://www.mediafire.com/file/ploblxm2tvxss0i/PhilZ-cwm6-XXLS2-XJB-2.7.tar.md5
PhilZ-cwm6-ZSLPN-OZS-v2.7
http://www.mediafire.com/file/s1w6pknswdkar8r/PhilZ-cwm6-ZSLPN-OZS-2.7-signed.zip
http://www.mediafire.com/file/152emk5ucld3m3b/PhilZ-cwm6-ZSLPN-OZS-2.7.tar.md5
PhilZ-cwm6-XXLRU-VDI-v2.7
http://www.mediafire.com/file/we24wbkbduj5414/PhilZ-cwm6-XXLRU-VDI-2.7-signed.zip
http://www.mediafire.com/file/tcp1itkj13kyw1o/PhilZ-cwm6-XXLRU-VDI-2.7.tar.md5
PhilZ-cwm6-XXLRG-DBT-v2.7
http://www.mediafire.com/file/cpydgkpb6z3v76d/PhilZ-cwm6-XXLRG-DBT-2.7-signed.zip
http://www.mediafire.com/file/77tcmr2ira8agvc/PhilZ-cwm6-XXLRG-DBT-2.7.tar.md5
PhilZ-cwm6-DDLR9-INU-v2.7
http://www.mediafire.com/file/u6vwb3j3wuxrff8/PhilZ-cwm6-DDLR9-INU-2.7-signed.zip
http://www.mediafire.com/file/b7yee04jkcf60g6/PhilZ-cwm6-DDLR9-INU-2.7.tar.md5
PhilZ-cwm6-XXLRT-DBT-v2.7
http://www.mediafire.com/file/wsmj7fytof14bf1/PhilZ-cwm6-XXLRT-DBT-2.7-signed.zip
http://www.mediafire.com/file/ma277mi9eua883a/PhilZ-cwm6-XXLRT-DBT-2.7.tar.md5
PhilZ-cwm6-JPLR8-OJP-v2.7
http://www.mediafire.com/file/9vto2ys3zrbfgt8/PhilZ-cwm6-JPLR8-OJP-2.7-signed.zip
http://www.mediafire.com/file/75j7l71pbpxgl9v/PhilZ-cwm6-JPLR8-OJP-2.7.tar.md5
PhilZ-cwm6-XXLRQ-DBT-v2.7
http://www.mediafire.com/file/vy8mtz6fwz5p15p/PhilZ-cwm6-XXLRQ-DBT-2.7-signed.zip
http://www.mediafire.com/file/3666vdc1uz9tbmq/PhilZ-cwm6-XXLRQ-DBT-2.7.tar.md5
PhilZ-cwm6-XXLRI-AUT-v2.7
http://www.mediafire.com/file/1a13xe8g7r64e05/PhilZ-cwm6-XXLRI-AUT-2.7-signed.zip
http://www.mediafire.com/file/50d50a68otpbm2f/PhilZ-cwm6-XXLRI-AUT-2.7.tar.md5
PhilZ-cwm6-XXLRK-XEU-v2.7
http://www.mediafire.com/file/269h649de0bch14/PhilZ-cwm6-XXLRK-XEU-2.7-signed.zip
http://www.mediafire.com/file/zsvbgruzob4a9ia/PhilZ-cwm6-XXLRK-XEU-2.7.tar.md5
PhilZ-cwm6-DDLR6-ODD-v2.7
http://www.mediafire.com/file/d5m87mm8ojhf7un/PhilZ-cwm6-DDLR6-ODD-2.7-signed.zip
http://www.mediafire.com/file/4k4hkmcl37gl18t/PhilZ-cwm6-DDLR6-ODD-2.7.tar.md5
PhilZ-cwm6-UBLR5-TCE-v2.7
http://www.mediafire.com/file/22j1nimd4ktdzeg/PhilZ-cwm6-UBLR5-TCE-2.7-signed.zip
http://www.mediafire.com/file/kakoa85v47a39en/PhilZ-cwm6-UBLR5-TCE-2.7.tar.md5
PhilZ-cwm6-UBLR3-PSN-v2.7
http://www.mediafire.com/file/30zfhdoga7v9oy5/PhilZ-cwm6-UBLR3-PSN-2.7-signed.zip
http://www.mediafire.com/file/jxlcmsut55ty1iy/PhilZ-cwm6-UBLR3-PSN-2.7.tar.md5
PhilZ-cwm6-BGLR3-XEC-v2.7
http://www.mediafire.com/file/n8m9nwhhbrua3ki/PhilZ-cwm6-BGLR3-XEC-2.7-signed.zip
http://www.mediafire.com/file/jd8v321jbe6oma6/PhilZ-cwm6-BGLR3-XEC-2.7.tar.md5
PhilZ-cwm6-DXLR2-OLB-v2.7
http://www.mediafire.com/file/0ubq6fl352rc583/PhilZ-cwm6-DXLR2-OLB-2.7-signed.zip
http://www.mediafire.com/file/wvqstid0na1dhbp/PhilZ-cwm6-DXLR2-OLB-2.7.tar.md5
PhilZ-cwm6-DXLR5-OLB-v2.7
http://www.mediafire.com/file/nicb5131p6q1162/PhilZ-cwm6-DXLR5-OLB-2.7-signed.zip
http://www.mediafire.com/file/ciju8etl4zabuaz/PhilZ-cwm6-DXLR5-OLB-2.7.tar.md5
PhilZ-cwm6-XXLPY-XEN-v2.7
http://www.mediafire.com/file/hrf98d07aappx5b/PhilZ-cwm6-XXLPY-XEN-2.7-signed.zip
http://www.mediafire.com/file/52z0366o8k4rlly/PhilZ-cwm6-XXLPY-XEN-2.7.tar.md5
PhilZ-cwm6-XXLRL-HUI-v2.7
http://www.mediafire.com/file/3hem6l2bm51h1qd/PhilZ-cwm6-XXLRL-HUI-2.7-signed.zip
http://www.mediafire.com/file/w3zaq0d0bt0d5h8/PhilZ-cwm6-XXLRL-HUI-2.7.tar.md5
PhilZ-cwm6-XXLQ3-OXX-v2.7
http://www.mediafire.com/file/vb2k1v723923bjk/PhilZ-cwm6-XXLQ3-OXX-2.7-signed.zip
http://www.mediafire.com/file/wgsv5i71so5a9af/PhilZ-cwm6-XXLQ3-OXX-2.7.tar.md5
PhilZ-cwm6-ZSLPM-OZS-v2.7
http://www.mediafire.com/file/t67jdutvuwcm49b/PhilZ-cwm6-ZSLPM-OZS-2.7-signed.zip
http://www.mediafire.com/file/hnkb3ch1z7xh2rl/PhilZ-cwm6-ZSLPM-OZS-2.7.tar.md5
PhilZ-cwm6-ZSLPF-OZS-v2.7
http://www.mediafire.com/file/96i8e31vrdf3rsu/PhilZ-cwm6-ZSLPF-OZS-2.7-signed.zip
http://www.mediafire.com/file/wdvcgitkc64jkiu/PhilZ-cwm6-ZSLPF-OZS-2.7.tar.md5
PhilZ-cwm6-JPLPD-OJP-v2.7
http://www.mediafire.com/file/6oxm7l1e0dopadh/PhilZ-cwm6-JPLPD-OJP-2.7-signed.zip
http://www.mediafire.com/file/orm3pi888kynp64/PhilZ-cwm6-JPLPD-OJP-2.7.tar.md5
PhilZ-cwm6-UBLPC-UUB-2.7
http://www.mediafire.com/file/35d4kd1wkpek1ev/PhilZ-cwm6-UBLPC-UUB-2.7-signed.zip
http://www.mediafire.com/file/3b1122el11c7gyb/PhilZ-cwm6-UBLPC-UUB-2.7.tar.md5
PhilZ-cwm6-DXLP9-OLB-v2.7
http://www.mediafire.com/file/yr1muaebjodj12e/PhilZ-cwm6-DXLP9-OLB-2.7-signed.zip
http://www.mediafire.com/file/7q0qdgygdklhs33/PhilZ-cwm6-DXLP9-OLB-2.7.tar.md5

<< 11.02.2013 - PhilZ-cwm6 v4.31 with CWM 6.0.2.8 based recovery >>
Proper Repack
ZSLM5-OZS
http://www.mediafire.com/file/hrpjrgozxjavzvm/PhilZ-cwm6-ZSLM5-OZS-4.31-signed.zip
http://www.mediafire.com/file/cr13z32ssd73ymo/PhilZ-cwm6-ZSLM5-OZS-4.31.tar.md5
ZCLSE-CHN
http://www.mediafire.com/file/on9rr2p0bdkx37l/PhilZ-cwm6-ZCLSE-CHN-4.31-signed.zip
http://www.mediafire.com/file/9d7wd5vb5hv920k/PhilZ-cwm6-ZCLSE-CHN-4.31.tar.md5
ZCLSD-CHN
http://www.mediafire.com/file/n21y2e3gru5q3u8/PhilZ-cwm6-ZCLSD-CHN-4.31-signed.zip
http://www.mediafire.com/file/n3b3j3cqikpu5ji/PhilZ-cwm6-ZCLSD-CHN-4.31.tar.md5
XXLSC-XJB
http://www.mediafire.com/file/d4ie5eyqao4sstj/PhilZ-cwm6-XXLSC-XJB-4.31-signed.zip
http://www.mediafire.com/file/dkld1t6rf6db2cd/PhilZ-cwm6-XXLSC-XJB-4.31.tar.md5
UBLS4-TCE
http://www.mediafire.com/file/v9vzcz3egeb20bx/PhilZ-cwm6-UBLS4-TCE-4.31-signed.zip
http://www.mediafire.com/file/1h357eg1ou20omd/PhilZ-cwm6-UBLS4-TCE-4.31.tar.md5
<< 04.02.2013 - PhilZ-cwm6 v4.00-b39 with CWM 6.0.2.7 based recovery >>
ZCLSD-CHN
http://www.mediafire.com/file/n1e8tnnbv22gbe9/PhilZ-cwm6-ZCLSD-CHN-4.00-b39-signed.zip
http://www.mediafire.com/file/g8opcn67sggk91b/PhilZ-cwm6-ZCLSD-CHN-4.00-b39.tar.md5
XXLSC-XJB
http://www.mediafire.com/file/nu2azhvw9fphztb/PhilZ-cwm6-XXLSC-XJB-4.00-b39-signed.zip
http://www.mediafire.com/file/wz8os9i1tea9apt/PhilZ-cwm6-XXLSC-XJB-4.00-b39.tar.md5
UBLS4-TCE
http://www.mediafire.com/file/inj35dviikbk4a8/PhilZ-cwm6-UBLS4-TCE-4.00-b39-signed.zip
http://www.mediafire.com/file/x3bzx8t9kd26rmk/PhilZ-cwm6-UBLS4-TCE-4.00-b39.tar.md5
<< 31.01.2013 - PhilZ-cwm6 v4.00-b34 with CWM 6.0.2.7 based recovery >>
PhilZ-cwm6-XXLSC-XJB
http://www.mediafire.com/file/56yfe5g5krqey23/PhilZ-cwm6-XXLSC-XJB-4.00-b34-signed.zip
http://www.mediafire.com/file/8w9awf456fbjab0/PhilZ-cwm6-XXLSC-XJB-4.00-b34.tar.md5
PhilZ-cwm6-UBLS4-TCE
http://www.mediafire.com/file/y60r7vy0q9b27zw/PhilZ-cwm6-UBLS4-TCE-4.00-b34-signed.zip
http://www.mediafire.com/file/64bw96tooo3ls80/PhilZ-cwm6-UBLS4-TCE-4.00-b34.tar.md5
<< 31.01.2013 - PhilZ-cwm6 v4.00-b33 with CWM 6.0.2.7 based recovery >>
PhilZ-cwm6-XXLSC-XJB
http://www.mediafire.com/file/fol5dg9t622llvr/PhilZ-cwm6-XXLSC-XJB-4.00-b33-signed.zip
http://www.mediafire.com/file/lny8fo3cb7p7hwi/PhilZ-cwm6-XXLSC-XJB-4.00-b33.tar.md5
PhilZ-cwm6-UBLS4-TCE
http://www.mediafire.com/file/x8esonw3o2oosub/PhilZ-cwm6-UBLS4-TCE-4.00-b33-signed.zip
http://www.mediafire.com/file/xgo9y99dgpwb8ti/PhilZ-cwm6-UBLS4-TCE-4.00-b33.tar.md5
<< 19 dec 2012 - PhilZ-cwm6 v3.81 with CWM 6.0.2.3 based recovery >>
UBLS4-TCE (JB Leak)
http://www.mediafire.com/file/tmukpmf8bx2tgtq/PhilZ-cwm6-UBLS4-TCE-3.81-signed.zip
http://www.mediafire.com/file/9ikmm3x76gayuej/PhilZ-cwm6-UBLS4-TCE-3.81.tar.md5
Christmas gift: updated all JB and ICS 4.0.4 kernels from 2.7x ---> 3.81
Download folder: http://www.mediafire.com/?25zw641fs6q3m
BULR1-SWC
DDLR9-INU
DDLRB-ODD
JPLR8-OJP
UBLR3-PSN
XXLRK-XEU
XXLRL-HUI
XXLRT-DBT
XXLRU-VDI
XXLRW-SFR
XXLSA-UNP
XXLSC-XJB
ZSLPN-OZS
<< 09 dec 2012 - PhilZ-cwm6 v3.75 with CWM 6.0.1.9 based recovery >>
** New kernels uploaded on 14.12.2012: UBLS4
UBLS4-TCE (JB Leak)
http://www.mediafire.com/file/9deh68n5r1a58px/PhilZ-cwm6-UBLS4-TCE-3.75-signed.zip
http://www.mediafire.com/file/97ub7okkvgbob83/PhilZ-cwm6-UBLS4-TCE-3.75.tar.md5
XXLSC-XJB (JB Leak)
http://www.mediafire.com/file/o569vuu36u96g3n/PhilZ-cwm6-XXLSC-XJB-3.75-signed.zip
http://www.mediafire.com/file/u4xewainz18aib4/PhilZ-cwm6-XXLSC-XJB-3.75.tar.md5
BULR1-SWC
http://www.mediafire.com/file/3zax712q2mu3drb/PhilZ-cwm6-BULR1-SWC-3.75-signed.zip
http://www.mediafire.com/file/98frr39q3hkmmf8/PhilZ-cwm6-BULR1-SWC-3.75.tar.md5
<< 02 dec 2012 - PhilZ-cwm6 v3.73 with CWM 6.0.1.9 based recovery >>
< Update to PhilZ Touch 3.43 based recovery>
** New kernels uploaded on 07.12.2012: UBLR6...
UBLR6-MVL
http://www.mediafire.com/file/3qe592149j6h8on/PhilZ-cwm6-UBLR6-MVL-3.73-signed.zip
http://www.mediafire.com/file/104dk92wmrpb3er/PhilZ-cwm6-UBLR6-MVL-3.73.tar.md5
XXLSC-XJB (JB Leak) *exFAT support in recovery*
http://www.mediafire.com/file/uyenk6ie77p9br6/PhilZ-cwm6-XXLSC-XJB-3.73-signed.zip
http://www.mediafire.com/file/286nl7iv6fccbf1/PhilZ-cwm6-XXLSC-XJB-3.73.tar.md5
<< 27 nov 2012 - PhilZ-cwm6 v3.71 with CWM 6.0.1.9 based recovery >>
< Update to PhilZ Touch 3.39 based recovery>
** New kernels uploaded on 01.12.2012: XXLSC...
XXLSC-XJB (JB Leak)
http://www.mediafire.com/file/v8gx4bn27749s7d/PhilZ-cwm6-XXLSC-XJB-3.71-signed.zip
http://www.mediafire.com/file/tpoa14y1iu31i9u/PhilZ-cwm6-XXLSC-XJB-3.71.tar.md5
XXLSA-XJB (JB Leak)
http://www.mediafire.com/file/9ojavc40w5bgz1s/PhilZ-cwm6-XXLSA-XJB-3.71-signed.zip
http://www.mediafire.com/file/jkbs4z1n69669qk/PhilZ-cwm6-XXLSA-XJB-3.71.tar.md5
XXLS7-XJB (JB Leak)
http://www.mediafire.com/file/1hlb9uijrk6kpbf/PhilZ-cwm6-XXLS7-XJB-3.71-signed.zip
http://www.mediafire.com/file/woe93g3leu5zaxt/PhilZ-cwm6-XXLS7-XJB-3.71.tar.md5
DDLRB-ODD
http://www.mediafire.com/file/qqbct2szgqfu17d/PhilZ-cwm6-DDLRB-ODD-3.71-signed.zip
http://www.mediafire.com/file/i38g65eere2ckcx/PhilZ-cwm6-DDLRB-ODD-3.71.tar.md5
XXLRW-SFR
http://www.mediafire.com/file/sunp1bdcvv96pbj/PhilZ-cwm6-XXLRW-SFR-3.71-signed.zip
http://www.mediafire.com/file/3gwdl889287sznb/PhilZ-cwm6-XXLRW-SFR-3.71.tar.md5
JPLR8-OJP
http://www.mediafire.com/file/13rg5nham1mg32l/PhilZ-cwm6-JPLR8-OJP-3.71-signed.zip
http://www.mediafire.com/file/1j9656p5emghbim/PhilZ-cwm6-JPLR8-OJP-3.71.tar.md5
XXLRU-VDI
http://www.mediafire.com/file/s4a139538ams3y3/PhilZ-cwm6-XXLRU-VDI-3.71-signed.zip
http://www.mediafire.com/file/d6le804oemshya3/PhilZ-cwm6-XXLRU-VDI-3.71.tar.md5
XXLRT-DBT
http://www.mediafire.com/file/4z4hjia4sppb1ho/PhilZ-cwm6-XXLRT-DBT-3.71-signed.zip
http://www.mediafire.com/file/jdc2k4yb8cbzn8f/PhilZ-cwm6-XXLRT-DBT-3.71.tar.md5
DDLR9-INU
http://www.mediafire.com/file/8xbh6mcd8bpt06g/PhilZ-cwm6-DDLR9-INU-3.71-signed.zip
http://www.mediafire.com/file/zglqdzpaz8szknp/PhilZ-cwm6-DDLR9-INU-3.71.tar.md5
ZSLPN-OZS
http://www.mediafire.com/file/lf8dsm69yn58b8l/PhilZ-cwm6-ZSLPN-OZS-3.71-signed.zip
http://www.mediafire.com/file/smnm9ujv2zmn16v/PhilZ-cwm6-ZSLPN-OZS-3.71.tar.md5
UBLR3-PSN
http://www.mediafire.com/file/sk39x2kfdxbcq61/PhilZ-cwm6-UBLR3-PSN-3.71-signed.zip
http://www.mediafire.com/file/uqcrg54p753i207/PhilZ-cwm6-UBLR3-PSN-3.71.tar.md5
XXLRL-HUI
http://www.mediafire.com/file/kui45475erhaeq7/PhilZ-cwm6-XXLRL-HUI-3.71-signed.zip
http://www.mediafire.com/file/1b30gg5hm81325l/PhilZ-cwm6-XXLRL-HUI-3.71.tar.md5
XXLRK-XEU
http://www.mediafire.com/file/5nm2j1cveffiqr3/PhilZ-cwm6-XXLRK-XEU-3.71-signed.zip
http://www.mediafire.com/file/ynlma9iyknkflbg/PhilZ-cwm6-XXLRK-XEU-3.71.tar.md5
<< 24 nov 2012 - PhilZ-cwm6 v3.65 with CWM 6.0.1.9 based recovery >>
< Update to PhilZ Touch 3.35 based recovery>
** New kernels uploaded on 24.11.2012: XXLS7, LSA
XXLSA-XJB (JB Leak)
http://www.mediafire.com/file/ba3uhmb6mpscwr6/PhilZ-cwm6-XXLSA-XJB-3.65-signed.zip
http://www.mediafire.com/file/5by5b0dd8tl6nex/PhilZ-cwm6-XXLSA-XJB-3.65.tar.md5
XXLS7-XJB (JB Leak)
http://www.mediafire.com/file/lfs6xh2odhrbfc3/PhilZ-cwm6-XXLS7-XJB-3.65-signed.zip
http://www.mediafire.com/file/uyu6bccsj3fe3uj/PhilZ-cwm6-XXLS7-XJB-3.65.tar.md5
<< 23 nov 2012 - PhilZ-cwm6 v3.62 with CWM 6.0.1.9 based recovery >>
< Update to PhilZ Touch 3.34 based recovery>
** New kernels uploaded on 22.11.2012: XXLS7, LSA
XXLSA-XJB (JB Leak)
http://www.mediafire.com/file/clb64kv7z6f3irv/PhilZ-cwm6-XXLSA-XJB-3.62-signed.zip
http://www.mediafire.com/file/a9l8lhoemr53c47/PhilZ-cwm6-XXLSA-XJB-3.62.tar.md5
XXLS7-XJB (JB Leak)
http://www.mediafire.com/file/zc9i56y5vopcb4i/PhilZ-cwm6-XXLS7-XJB-3.62-signed.zip
http://www.mediafire.com/file/mcjp1hxrgmic6i4/PhilZ-cwm6-XXLS7-XJB-3.62.tar.md5
<< 19 nov 2012 - PhilZ-cwm6 v3.5 with CWM 6.0.1.8 based recovery >>
< Update to PhilZ Touch 3.25 based recovery>
** New kernels uploaded on 19.11.2012: XXLS7...
XXLS7-XJB (JB Leak)
http://www.mediafire.com/file/k4vzkm3olr6ck1o/PhilZ-cwm6-XXLS7-XJB-3.5-signed.zip
http://www.mediafire.com/file/calkp68y61yq57f/PhilZ-cwm6-XXLS7-XJB-3.5.tar.md5
XXLRW-SFR
http://www.mediafire.com/file/tf6bdbsszmia7qt/PhilZ-cwm6-XXLRW-SFR-3.5-signed.zip
http://www.mediafire.com/file/ke2aufo34957mdx/PhilZ-cwm6-XXLRW-SFR-3.5.tar.md5
JPLR8-OJP
http://www.mediafire.com/file/0rv6zafj593m3bu/PhilZ-cwm6-JPLR8-OJP-3.5-signed.zip
http://www.mediafire.com/file/9543g31ytzhmc3i/PhilZ-cwm6-JPLR8-OJP-3.5.tar.md5
XXLRU-VDI
http://www.mediafire.com/file/3a5z5g32o6w9igk/PhilZ-cwm6-XXLRU-VDI-3.5-signed.zip
http://www.mediafire.com/file/7y3bnc6h88hbqh6/PhilZ-cwm6-XXLRU-VDI-3.5.tar.md5
XXLRT-DBT
http://www.mediafire.com/file/d3pt1wk27ddaa7m/PhilZ-cwm6-XXLRT-DBT-3.5-signed.zip
http://www.mediafire.com/file/ut5w6er1hyee1o8/PhilZ-cwm6-XXLRT-DBT-3.5.tar.md5
DDLR9-INU
http://www.mediafire.com/file/h4q09b02dpqkg0g/PhilZ-cwm6-DDLR9-INU-3.5-signed.zip
http://www.mediafire.com/file/26b729p7oph4kch/PhilZ-cwm6-DDLR9-INU-3.5.tar.md5
ZSLPN-OZS
http://www.mediafire.com/file/dchg2h5hsgy1rjc/PhilZ-cwm6-ZSLPN-OZS-3.5-signed.zip
http://www.mediafire.com/file/ynf34g1286t3rtc/PhilZ-cwm6-ZSLPN-OZS-3.5.tar.md5
UBLR3-PSN
http://www.mediafire.com/file/hdsdqx6rkdcvlch/PhilZ-cwm6-UBLR3-PSN-3.5-signed.zip
http://www.mediafire.com/file/rxzl79rbnd14rhd/PhilZ-cwm6-UBLR3-PSN-3.5.tar.md5
XXLRL-HUI
http://www.mediafire.com/file/k564wk66kqqts5l/PhilZ-cwm6-XXLRL-HUI-3.5-signed.zip
http://www.mediafire.com/file/jk859f5nkaq2n2i/PhilZ-cwm6-XXLRL-HUI-3.5.tar.md5
XXLRK-XEU
http://www.mediafire.com/file/10dcvbs9cii42dp/PhilZ-cwm6-XXLRK-XEU-3.5-signed.zip
http://www.mediafire.com/file/ne8h7xqqfbqf8w5/PhilZ-cwm6-XXLRK-XEU-3.5.tar.md5
<< 09 nov 2012 - PhilZ-cwm6 v3.1 with CWM 6.0.1.5 based recovery >>
< Update to PhilZ Touch 3.0 based recovery>
** New kernels on 12.11.2012: XXLS7...
XXLS7-XJB-3.1-Update1 (JB Leak) *fixed custom bootanimation and ors path
http://www.mediafire.com/file/hep9xsad80zc8n0/PhilZ-cwm6-XXLS7-XJB-3.1-update1-signed.zip
http://www.mediafire.com/file/322co32ddbp2ep2/PhilZ-cwm6-XXLS7-XJB-3.1-update1.tar.md5
XXLS7-XJB-3.1 (JB Leak) *get update1 version fixing some path
http://www.mediafire.com/file/plg0vdjc7btai4d/PhilZ-cwm6-XXLS7-XJB-3.1-signed.zip
http://www.mediafire.com/file/1wuen85d7w9sewb/PhilZ-cwm6-XXLS7-XJB-3.1.tar.md5
XXLRW-SFR-3.1
http://www.mediafire.com/file/yi7z90pf3g1qncy/PhilZ-cwm6-XXLRW-SFR-3.1-signed.zip
http://www.mediafire.com/file/7uw9fpwm3we9po5/PhilZ-cwm6-XXLRW-SFR-3.1.tar.md5
JPLR8-OJP-3.1
http://www.mediafire.com/file/4puww84f1y0r2rs/PhilZ-cwm6-JPLR8-OJP-3.1-signed.zip
http://www.mediafire.com/file/7x4cux9n7d8w3se/PhilZ-cwm6-JPLR8-OJP-3.1.tar.md5
XXLRU-VDI-3.1
http://www.mediafire.com/file/p3zeaehaa0pael1/PhilZ-cwm6-XXLRU-VDI-3.1-signed.zip
http://www.mediafire.com/file/i1anwjfu1x2oqna/PhilZ-cwm6-XXLRU-VDI-3.1.tar.md5
XXLRT-DBT-3.1
http://www.mediafire.com/file/o7c3kjtc10i5x31/PhilZ-cwm6-XXLRT-DBT-3.1-signed.zip
http://www.mediafire.com/file/ro3aq4yq13qfdxa/PhilZ-cwm6-XXLRT-DBT-3.1.tar.md5
DDLR9-INU-3.1
http://www.mediafire.com/file/7ndqv0d312li6t7/PhilZ-cwm6-DDLR9-INU-3.1-signed.zip
http://www.mediafire.com/file/bk34xx6sr3n73is/PhilZ-cwm6-DDLR9-INU-3.1.tar.md5
ZSLPN-OZS-3.1
http://www.mediafire.com/file/llzd9gxzjbaptmn/PhilZ-cwm6-ZSLPN-OZS-3.1-signed.zip
http://www.mediafire.com/file/c20tfbucw7uuvf7/PhilZ-cwm6-ZSLPN-OZS-3.1.tar.md5
UBLR3-PSN-3.1
http://www.mediafire.com/file/9375mkno1fg1uv5/PhilZ-cwm6-UBLR3-PSN-3.1-signed.zip
http://www.mediafire.com/file/meg97050clhmig7/PhilZ-cwm6-UBLR3-PSN-3.1.tar.md5
XXLRL-HUI-3.1
http://www.mediafire.com/file/m44quvvow24kst3/PhilZ-cwm6-XXLRL-HUI-3.1-signed.zip
http://www.mediafire.com/file/j92gnkgbyg2rokx/PhilZ-cwm6-XXLRL-HUI-3.1.tar.md5
XXLRK-XEU-3.1
http://www.mediafire.com/file/1dqj4g7b5l0k8ac/PhilZ-cwm6-XXLRK-XEU-3.1-signed.zip
http://www.mediafire.com/file/b6n80mh5j66sz12/PhilZ-cwm6-XXLRK-XEU-3.1.tar.md5
<< 29 sept 2012 - PhilZ-cwm6 v2.5 with MULTI-bootanimation support >>
PhilZ-cwm6-XXLRG-DBT-v2.5
http://www.mediafire.com/file/h794d7c7399l1eh/PhilZ-cwm6-XXLRG-DBT-2.5-signed.zip
http://www.mediafire.com/file/m36k6h6g0acgq6n/PhilZ-cwm6-XXLRG-DBT-2.5.tar.md5
PhilZ-cwm6-DDLR9-INU-v2.5
http://www.mediafire.com/file/e383yvmh7oqse88/PhilZ-cwm6-DDLR9-INU-2.5-signed.zip
http://www.mediafire.com/file/0nqqd7vaznvro0w/PhilZ-cwm6-DDLR9-INU-2.5.tar.md5
PhilZ-cwm6-XXLRT-DBT-v2.5
http://www.mediafire.com/file/ucu9fzcfpe8b6je/PhilZ-cwm6-XXLRT-DBT-2.5-signed.zip
http://www.mediafire.com/file/6uml9sbmsmm4s4d/PhilZ-cwm6-XXLRT-DBT-2.5.tar.md5
PhilZ-cwm6-JPLR8-OJP-v2.5
http://www.mediafire.com/file/e8d3b2vjd7p7qcx/PhilZ-cwm6-JPLR8-OJP-2.5-signed.zip
http://www.mediafire.com/file/zz8q2dqc3if3ktr/PhilZ-cwm6-JPLR8-OJP-2.5.tar.md5
PhilZ-cwm6-XXLRQ-DBT-v2.5
http://www.mediafire.com/file/cd9ev002bd5v7g9/PhilZ-cwm6-XXLRQ-DBT-2.5-signed.zip
http://www.mediafire.com/file/llpdmlhbffl2lv8/PhilZ-cwm6-XXLRQ-DBT-2.5.tar.md5
PhilZ-cwm6-XXLRI-AUT-v2.5
http://www.mediafire.com/file/4azi52cbhc7480j/PhilZ-cwm6-XXLRI-AUT-2.5-signed.zip
http://www.mediafire.com/file/98g9u9hro4ribg8/PhilZ-cwm6-XXLRI-AUT-2.5.tar.md5
PhilZ-cwm6-XXLRK-XEU-v2.5
http://www.mediafire.com/file/74auymkapc809pm/PhilZ-cwm6-XXLRK-XEU-2.5-signed.zip
http://www.mediafire.com/file/6hrlnf2a4rd089g/PhilZ-cwm6-XXLRK-XEU-2.5.tar.md5
PhilZ-cwm6-DDLR6-ODD-v2.5
http://www.mediafire.com/file/xcqitnf8emk6fir/PhilZ-cwm6-DDLR6-ODD-2.5-signed.zip
http://www.mediafire.com/file/7hw0tgw9tpjgraw/PhilZ-cwm6-DDLR6-ODD-2.5.tar.md5
PhilZ-cwm6-DXLR5-OLB-v2.5
http://www.mediafire.com/file/2x4tm3pldq457ee/PhilZ-cwm6-DXLR5-OLB-2.5-signed.zip
http://www.mediafire.com/file/2q0qfjx2n3drj56/PhilZ-cwm6-DXLR5-OLB-2.5.tar.md5
PhilZ-cwm6-XXLPY-XEN-v2.5
http://www.mediafire.com/file/wmlpomsrg6l3zfa/PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip
http://www.mediafire.com/file/j5i831w71v147w4/PhilZ-cwm6-XXLPY-XEN-2.5.tar.md5
PhilZ-cwm6-XXLRL-HUI-v2.5
http://www.mediafire.com/file/i6ngxqa49cfx4f5/PhilZ-cwm6-XXLRL-HUI-2.5-signed.zip
http://www.mediafire.com/file/tc3qqlsnq2udc21/PhilZ-cwm6-XXLRL-HUI-2.5.tar.md5
PhilZ-cwm6-ZSLPM-OZS-v2.5
http://www.mediafire.com/file/bkxzpsq835amlyx/PhilZ-cwm6-ZSLPM-OZS-2.5-signed.zip
http://www.mediafire.com/file/ppp7u2lplhezgyx/PhilZ-cwm6-ZSLPM-OZS-2.5.tar.md5

reserved

Mirror for kernel posted in post #2
Below mentioned kernels are same as in post#2 here is just mirror of download link.
9Nov12
Zip version : Need to flash using recovery (you can flash with stock recovery too)
XXLS7-XJB-3.1 (JB Leak)
XXLRW-SFR-3.1
JPLR8-OJP-3.1
XXLRU-VDI-3.1
XXLRT-DBT-3.1
DDLR9-INU-3.1
ZSLPN-OZS-3.1
UBLR3-PSN-3.1
XXLRL-HUI-3.1
XXLRK-XEU-3.1
Older Version
V2.7 Dual USB mount + Touch Recovery
Zip version : Need to flash using recovery (you can flash with stock recovery too)
PhilZ-cwm6-ZSLPN-OZS-v2.7
PhilZ-cwm6-XXLRU-VDI-v2.7
PhilZ-cwm6-XXLRG-DBT-v2.7
PhilZ-cwm6-DDLR9-INU-v2.7
PhilZ-cwm6-XXLRT-DBT-v2.7
PhilZ-cwm6-JPLR8-OJP-v2.7
PhilZ-cwm6-XXLRQ-DBT-v2.7
PhilZ-cwm6-XXLRI-AUT-v2.7
PhilZ-cwm6-XXLRK-XEU-v2.7
PhilZ-cwm6-DDLR6-ODD-v2.7
PhilZ-cwm6-DXLR5-OLB-v2.7
PhilZ-cwm6-UBLR3-PSN-v2.7
PhilZ-cwm6-BGLR3-XEC-v2.7
PhilZ-cwm6-DXLR2-OLB-v2.7
PhilZ-cwm6-DXLR5-OLB-v2.7
PhilZ-cwm6-XXLPY-XEN-v2.7
PhilZ-cwm6-XXLRL-HUI-v2.7
PhilZ-cwm6-XXLQ3-OXX-v2.7
PhilZ-cwm6-ZSLPM-OZS-v2.7
PhilZ-cwm6-ZSLPF-OZS-v2.7
PhilZ-cwm6-JPLPD-OJP-v2.7
PhilZ-cwm6-UBLPC-UUB-2.7
PhilZ-cwm6-DXLP9-OLB-v2.7
tar version - Need to flash using PC/Mobile odin. in case of PC you need to reset counter later.
PhilZ-cwm6-XXLRG-DBT-v2.7
PhilZ-cwm6-DDLR9-INU-v2.7
PhilZ-cwm6-XXLRT-DBT-v2.7
PhilZ-cwm6-JPLR8-OJP-v2.7
PhilZ-cwm6-XXLRQ-DBT-v2.7
PhilZ-cwm6-XXLRI-AUT-v2.7
PhilZ-cwm6-XXLRK-XEU-v2.7
PhilZ-cwm6-DDLR6-ODD-v2.7
PhilZ-cwm6-DXLR5-OLB-v2.7
PhilZ-cwm6-XXLPY-XEN-v2.7
PhilZ-cwm6-XXLRL-HUI-v2.7
PhilZ-cwm6-ZSLPM-OZS-v2.7
PhilZ-cwm6-JPLPD-OJP-v2.7
Click to expand...
Click to collapse
V2.5
Zip version : Need to flash using recovery (you can flash with stock recovery too)
PhilZ-cwm6-XXLRG-DBT-2.5
PhilZ-cwm6-DDLR9-INU-v2.5
PhilZ-cwm6-XXLRT-DBT-v2.5
PhilZ-cwm6-JPLR8-OJP-v2.5
PhilZ-cwm6-XXLRQ-DBT-v2.5
PhilZ-cwm6-XXLRI-AUT-v2.5
PhilZ-cwm6-XXLRK-XEU-v2.5
PhilZ-cwm6-DDLR6-ODD-v2.5
PhilZ-cwm6-DXLR5-OLB-v2.5
PhilZ-cwm6-XXLPY-XEN-v2.5
PhilZ-cwm6-XXLRL-HUI-v2.5
PhilZ-cwm6-ZSLPM-OZS-v2.5
tar version - Need to flash using PC/Mobile odin. in case of PC you need to reset counter later.
PhilZ-cwm6-XXLRG-DBT-2.5
PhilZ-cwm6-DDLR9-INU-v2.5
PhilZ-cwm6-XXLRT-DBT-v2.5
PhilZ-cwm6-JPLR8-OJP-v2.5
PhilZ-cwm6-XXLRQ-DBT-v2.5
PhilZ-cwm6-XXLRI-AUT-v2.5
PhilZ-cwm6-XXLRK-XEU-v2.5
PhilZ-cwm6-DDLR6-ODD-v2.5
PhilZ-cwm6-DXLR5-OLB-v2.5
PhilZ-cwm6-XXLPY-XEN-v2.5
PhilZ-cwm6-XXLRL-HUI-v2.5
PhilZ-cwm6-ZSLPM-OZS-v2.5
Click to expand...
Click to collapse

Reserved

Request & Reporting
Request :
If your kernel is not listed above, OR you want to request when new ROM released, post your request with
ROM build version, CSC code as well better if you port zImage file and upload. this will make easy for developer.
Whatever request i see, will update here to this post so Phill can easily locate it. So before posting request, make sure this post doesn't have pending request already for kernel you are looking for.
Pending Request
Report :
As we know this kernel is pure stock kernel + patched mmc earse command + edit Ramdisk
so, posting regarding score(card)of ubuntoo (watever it call ) or quadrant score have nothing to do. Battery management/performance will same as on stock kernel.
Again input battery statistics or comparing with other custom kernel having no meaning. B'coz this is stock kernel and it will be same as stock kernel, no more no less. So kindly avoid such kind of discuss. Right now Phill have not indicate to add tweak to kernel, so no meaning to put request for under/overclocking and so and so. For this you always have choice for custom kernel, there are already nice custom kernels are available on development section. This is only for people want pure stock kernel but patched brick bug with added recovery function. That's it.
Please don't ask/describe here anything which is not related to this kernel. such posting will be consider offending and will be reported to moderator, which i don't like really.
Hope we never need moderator to look into this thread.
Thanks for co operation and Wish you happy flashing.

From where to get the kernel???? Where is the link i am lil confused...plz lemme know...
Sent from my GT-N7000 using xda app-developers app

@droidbond
C'mon...patience plz....OP is uploading
@droidbond again
yw and no prob dude....lol

Nirak said:
@droidbond
C'mon...patience plz....OP is uploading
Click to expand...
Click to collapse
Thanx dude....actually i thot he uploaded them already..oops...
Sent from my GT-N7000 using xda app-developers app

Thanks guys for your tremendous work. Great development for n7000 family. Thanks a lot.

here
http://forum.xda-developers.com/showpost.php?p=31310851&postcount=2
Click to expand...
Click to collapse

@darthvedor
R u kidding??
Your link is for SGS2 thread

@darthvedor
Kindly remove link
That is for 9100
Sent from my GT-N7000 using xda premium

dr.ketan said:
Kindly remove link
That is for 9100
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Dr.Ketan , Can i try this kennel with TW ICS custom rom? thanks

darthvedor said:
here
Click to expand...
Click to collapse
Remove that link. It is the i9100 version. It will brick your n7000
Sent from my GT-I9100 using Tapatalk 2

Done
Links on post 2
Please take the time to read posts 1, 2 and 3 before flashing
Feel free to report issues or a successful flash.
At thank you only posters: I appreciate these posts, but just add to them the kernel version you flashed and you are happy with. That way, we know it works
Happy wipe /data in recovery
BUT, PLEASE, DO NOT BLAME ME EVER IF YOU BRICK YOUR PHONE. ALWAYS BACKUP YOUR DATA BEFORE ANY FLASH; EVEN IN SAMSUNG KIES
edit:
Feel free to request upload of new kernels. Just give me these info:
Kernel exact 5 char name: DDLR9 for example
CSC code it was released on: AUT...
A download link for the zImage only
or
A fast mirror to the whole ROM (no hotfile.com...)
or
country and phone operator it was released for, so that I can get it in Fus
Click to expand...
Click to collapse

simplelife said:
Dr.Ketan , Can i try this kennel with TW ICS custom rom? thanks
Click to expand...
Click to collapse
Just flashed the LRQ kernel on my rr v11. No problems at all.
Sent from my GT-N7000 using Tapatalk 2

simplelife said:
Dr.Ketan , Can i try this kennel with TW ICS custom rom? thanks
Click to expand...
Click to collapse
It will work on any custom ROM that supports a stock kernel
This is basically a stock kernel
If you move from DDLR9 to PhilZ-cwm6 DDLR9, then no need to wipe /cache or dalvik. Kernel is same, only patched + edit RAMdisk for features

[SFT][CWM][GB][SU660] Smartflash cleaner with CWM5.0.2.8e for SU660

This is a Smartflash based cleaner for SU660
Please see also the NvFlash cleaner for SU660
http://forum.xda-developers.com/showthread.php?t=1968280
This method introduced by Anonymous donor (Please let me know if Im wrong)
http://forum.xda-developers.com/showthread.php?t=1926700
• Simpler than NVFlash cleaner
• faster than NVFlash cleaner
• GB bootloader included (fastboot.bin)
• CWM-based recovery 5.0.2.8e included
- based on koush's CWM 5.0.2.8
- png font support by wkpark
- some CWM6.0.1.y features (like as repeat-key) are cherry-picked
- support changing font / you can also change the default font! (CWM5.0.2.8e)
Procedure
• Prepare S/W Download mode
• Execute SmartFlashTool_P990.exe
• Press "Start" button
• Automatically rebooting..
Download
http://code.google.com/p/openstar2x/downloads/detail?name=GB-SU660-smartflash-cleaner-v0.1.zip
View attachment GB-SU660-smartflash-cleaner-v0.2.zip
View attachment GB-SU660-smartflash-cleaner-v0.2a.zip
View attachment GB-SU660-smartflash-cleaner-v0.3.zip
Warning/Notes
• UDB(Internal storage partition) will be formatted
• UDA(/data partition), APP(/system) partitions are preserved
• Included CWM5 works both old and new bootloader, even work with both old and new partition layout!
Tips
• You can change your bootloader by replacing the fastboot.bin (no need to change bct or signing!!!)
• You can also change partition layout by changing the flash.cfg

Changelog
• support changing font / you can also change the default font! (CWM5.0.2.8e) 2012/11/16
- droid_10x18g.png - anti-aliased Droid sans 10x18 font (by default)
- droid_14x25g.png - anti-aliased Droid sans 14x25 font
- droid_17x32g.png - anti-aliased Droid sans 17x32 font
- roboto_10x18.png - bitmap roboto 10x18
- roboto_15x24.png - bitmap roboto 15x24
- font_7x16.png - bitmap 7x16 font

Hi there!
I followed the procedures, but after flashing, I'm back at CWM, and can't seem to boot to ROM. tried flashing/installing from zip but I can't mount /sdcard; says error mounting /sdcard!
Sorry but I'm lost here. Kindly help. Thanks
*edit 1*
I managed to mount the internal sd card, format it in windows 7, copy over the files for flashing (CM10 nightly, SU660 compatible kernel and gapps). Flashed those files in CWM, reboot system, then I'm stuck at LG logo..won't proceed further. What else should I do?
*edit 2*
Thanks! Running 4.2.1! Problem now is I can't find my Internal and External sd cards...

Hi some one tell me how i install p990 GB rom on Su660 with international OS i m currently running ICS ROM ics partition layer tell me proper method plzzz

[Rom] Tizen Rom Nougat TIM 1701.13 V3.0 ZE552KL & ZE520KL Fast&Stable [30.03.2017]

[Rom] Tizen Rom Nougat TIM 1701.13 V3.0 ZE552KL & ZE520KL Fast&Stable [30.03.2017]
Hi Everybody!
Today, I shares my new rom to all of you. I hope you will enjoy with it
V3.0 :
Changelog
- Port latest Nougat 7.0 TIM 1701.13. Official download here : https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_Download/
- Aroma Installer, don't get stuck at finished installation
- Debloat app System
- Delete all TIM app
- Added Rebooter
- Rooted after flash rom
- Add ViperXHiFi 2.1.0.2
- Add updated Asus app in rom
- Add AsusMusic
- Add ringstone, notification, alarm LG G5
- Add and replace wallpaper LG G6
- Working Headset perfectly
- Wifi working perfectly on ZE520KL (thanks @anhenrique for testing fix issue)
- Delete folder oat unnecessary in Asus app, priv-app
- More...
Old :
V2.1 :
Changelog
- Latest Nougat 7.0 OTA 1701.13 for ZE520KL (thanks @gkillershots)
- Patch OTA rom only (not full rom)
V2.0 :
Changelog
- Base latest Nougat 7.0 1701.8
- Aroma Installer
- Debloat app System
- Added Rebooter
- Rooted after flash rom
- Add ViperXHiFi 2.1.0.2
- Add updated Asus app in rom
- Add AsusMusic
- Add ringstone, notification, alarm LG G5
- Working Headset perfectly
- Wifi working perfectly on ZE520KL (thanks @anhenrique for testing fix issue)
- Delete folder oat unnecessary in Asus app, priv-app
- More...
OLD
V1.0:
Changelog
- Base latest Nougat 7.0 1701.8
- Aroma Installer
- Debloat app System
- Added Rebooter
- Rooted after flash rom
- Add ViperXHiFi 2.1.0.2
- Add updated Asus app in rom
- Add AsusMusic
- Add ringstone, notification, alarm LG G5
- More...
V3.0 :
INSTALLATION GUIDE
- Unlock bootloader, installed TWRP recovery in Nougat 7.0
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbQk0xd2Y5Q01RSjg/view?usp=sharing
- Backup current rom and backup data in storage card
- Copy and paste Rom to Internal storage or ext sdcard
- Enter Twrp recovery
- full wipe (wipe system, data, cache, davik cache)
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
OLD :
V2.1 :
INSTALLATION GUIDE
- Unlock bootloader, installed TWRP recovery in Nougat 7.0. Guide here : https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926
- Tizen V2 must be installed on your device
- Download patch rom OTA :
+ For user ZE552KL : https://drive.google.com/file/d/0Bxzxv3DgqkRbMHZtT01zSlEyMVU/view?usp=sharing
+ For user ZE520KL : https://drive.google.com/file/d/0Bxzxv3DgqkRbOHY3bGllR1Faanc/view?usp=sharing
- Copy and paste Rom to Internal storage or ext sdcard
- Enter Twrp recovery
- Install patch ota rom
- Reboot and Enjoy new update ota rom
V2.0 :
INSTALLATION GUIDE
- Unlock bootloader, installed TWRP recovery in Nougat 7.0. Guide here : https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbQmpsa0ZGY1EzWlU/view?usp=sharing
- Backup current rom and backup data in storage card
- Copy and paste Rom to Internal storage or ext sdcard
- Enter Twrp recovery
- full wipe (wipe system, data, cache, davik cache)
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
* For User ZE520KL
- Downloas file Add on : https://drive.google.com/file/d/0Bxzxv3DgqkRbZC1IQU1QYUtLb0k/view?usp=sharing
- After finishing setup to home screen, open app "Rebooter" on App drawer
- Select Reboot Recovery
- In TWRP recovery, install file Add on, no wipe
- Reboot and Enjoy
OLD
V1.0 :
INSTALLATION GUIDE
- Unlock bootloader, installed TWRP recovery in Nougat 7.0. Guide here : https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbVTBoeko3cnFtc1k/view?usp=sharing
(link mirror : https://mega.nz/#!Pp0UHZYD!p8nKTPabsLvPViDllSSwpZnpbDly7iyYM0PyGtscAag)
- Backup current rom and backup data in storage card
- Enter Twrp recovery
- Wipe > Format Data. Reboot
- Copy and paste Rom to Internal storage or ext sdcard
- Enter Twrp recovery
- full wipe (wipe system, data, cache, davik cache)
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Video guide install rom :
https://www.youtube.com/watch?v=SITM1TEIlRw
Video preview V3.0
https://youtu.be/4NI8UpF5HhU
Thanks :
- @jcadduono for TWRP recovery
- @superr for kitchen
- @Chainfire for supersu
- @snowwolf725 for guide unlock bootloader
Bonus (using for V1.0, V2.0 and V3.0) : UI with mod quicksetting and recent radius : https://drive.google.com/file/d/0Bxzxv3DgqkRbTGZWLXkyRjVUWjg/view?usp=sharing
Note :
- Sorry with my bad English
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- Free for donate
- After finished setup at startup, supersu should be set permission in Auto Star Manager Control
Thanks All

So far I've had some issues:
Wi-Fi won't turn on, although AP works fine.
Nothing happens when plugging a headset, no sound comes from it, it's not even detected.
ZE520KL WW, in Brazil

cdanthien said:
Hi Everybody!
Today, I shares my new rom to all of you. I hope you will enjoy with it
Changelog
- Base latest Nougat 7.0 1701.8
- Aroma Installer
- Debloat app System
- Added Rebooter
- Rooted after flash rom
- Add ViperXHiFi 2.1.0.2
- Add updated Asus app in rom
- Add AsusMusic
- Add ringstone, notification, alarm LG G5
- More...
INSTALLATION GUIDE
- Unlock bootloader, installed TWRP recovery in Nougat 7.0. Guide here : https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbVTBoeko3cnFtc1k/view?usp=sharing
(link mirror : https://mega.nz/#!Pp0UHZYD!p8nKTPabsLvPViDllSSwpZnpbDly7iyYM0PyGtscAag)
- Backup current rom and backup data in storage card
- Enter Twrp recovery
- Wipe > Format Data. Reboot
- Copy and paste Rom to Internal storage or ext sdcard
- Enter Twrp recovery
- full wipe (wipe system, data, cache, davik cache)
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Video guide install rom :
https://www.youtube.com/watch?v=SITM1TEIlRw
Thanks :
- @jcadduono for TWRP recovery
- @superr for kitchen
- @Chainfire for supersu
- @snowwolf725 for guide unlock bootloader
Bonus : UI with mod quicksetting and recent radius : https://drive.google.com/file/d/0Bxzxv3DgqkRbTGZWLXkyRjVUWjg/view?usp=sharing
Note :
- Sorry with my bad English
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- Free for donate
- After finished setup at startup, supersu should be set permission in Auto Star Manager Control
Thanks All
Click to expand...
Click to collapse
Thank you very much, I try to follow up and can use.
Sorry i am not good at english
ขอบคุณมากๆครับผมลองทำตามขึ้นตอนแล้วสามารถใช้งานได้
ขอโทษผมไม่ถนัดภาษาอังกฤษ

Is it possible to install in version 6? Or should it be done to upgrade to 7 before?

Msmtx said:
So far I've had some issues:
Wi-Fi won't turn on, although AP works fine.
Nothing happens when plugging a headset, no sound comes from it, it's not even detected.
ZE520KL WW, in Brazil
Click to expand...
Click to collapse
have exactly same problem

No WI-FI issuses on my ZE552KL but nothing happens when plugging a headset, , it's not even detected either.

Request
Can you add overclocking capabilities to this rom?

Sm0k3r83 said:
No WI-FI issuses on my ZE552KL but nothing happens when plugging a headset, , it's not even detected either.
Click to expand...
Click to collapse
Fixed the issue.

Msmtx said:
So far I've had some issues:
Wi-Fi won't turn on, although AP works fine.
Nothing happens when plugging a headset, no sound comes from it, it's not even detected.
ZE520KL WW, in Brazil
Click to expand...
Click to collapse
update script caused this issue. I will release next version soon
Can user ZE520KL help me making test for fixing wifi issue? just flash through recovery (no wipe) : https://drive.google.com/file/d/0Bxzxv3DgqkRbNE9wbHN6blRDWU0/view?usp=sharing
Reboot and report me for result. Thanks for help

cdanthien said:
update script caused this issue. I will release next version soon
Can user ZE520KL help me making test for fixing wifi issue? just flash through recovery (no wipe) : https://drive.google.com/file/d/0Bxzxv3DgqkRbNE9wbHN6blRDWU0/view?usp=sharing
Reboot and report me for result. Thanks for help
Click to expand...
Click to collapse
I tried and "system interface stopped"

anhenrique said:
I tried and "system interface stopped"
Click to expand...
Click to collapse
Try another file please : https://drive.google.com/file/d/0Bxzxv3DgqkRbNnQ5NVVfMC1xclE/view?usp=sharing

ZE520KL
cdanthien said:
Try another file please : https://drive.google.com/file/d/0Bxzxv3DgqkRbNnQ5NVVfMC1xclE/view?usp=sharing
Click to expand...
Click to collapse
have tried this. everything seems normal now. i will use this rom to be my daily driver. thanks. i hope update will come in the future
edited : headphone problem still persist. it still can't detect my headphone. please fix this

cdanthien said:
Try another file please : https://drive.google.com/file/d/0Bxzxv3DgqkRbNnQ5NVVfMC1xclE/view?usp=sharing
Click to expand...
Click to collapse
Now works perfectly! Thanks

Hi, I've the bootloader unlocked but I prefer to don't install twrp, can I flash this rom by "install update from sdcard" or by adb on the original unlocked bootloader?

ZE520KL
I just found a bug, the system is not recognizing the headphones.

anhenrique said:
ZE520KL
I just found a bug, the system is not recognizing the headphones.
Click to expand...
Click to collapse
Fixed. Today, i will upload next version without this issue

Everything works perfectly, thank you for sharing!

rottenapple88 said:
Hi, I've the bootloader unlocked but I prefer to don't install twrp, can I flash this rom by "install update from sdcard" or by adb on the original unlocked bootloader?
Click to expand...
Click to collapse
No, just flash rom through TWRP recovery

Next V2.0 uploaded at #1

cdanthien said:
Next V2.0 uploaded at #1
Click to expand...
Click to collapse
thank you so much for the hardwork. rom working fine now. wifi and headphone working on ZE520KL. but there is new update in official nougat. looking forward for the update based on new update