hi today my htc one's screen stopped responding. i noticed after i plugged it in to charge and off a couple of times, now the screen is unresponsive. i cant swipe to unlock the phone or anything. if i wait a while and leave it to charge, it will work a little. hardware buttons work fine it's just the screen itself. anyone know a fix or the reason behind this? thanks.
Your explanation isn't very clear as to when the screen doesn't work.
I've heard issues with dodgy chargers preventing touch screen from working whilst plugged in.
If the touch screen doesn't work when no cables are plugged in, it's probably just broken.
There's a service menu you can get to with a touch screen test, I can't remember how to get there, but it also has a battery test if that makes it easier to search for. If that test fails when no cables are plugged in, it's time to get it repaired.
Related
Hi,
On my wife's Xperia, she dropped it, which obviously didn't help, but it seems to have made it work strangely.
a) Pressing the power button does not turn the screen off, it just makes the screen dark however, in a dark room you can see it's still lit up faintly, so it drains the battery as though it's on all the time.
b) The LEDs when charging do not come on, however it is charging properly
c) When booting, the screen does nothing until you pull out the keyboard, then it comes on fine.
Any ideas, mainly it's point a) which is causing the problems. I've got insurance, so I can get it replaced, just didn't want to go through the hassle if there was a solution out there anyone can think of. Could something have got corrupted which is meaning it's not turning off the screen properly, which a hard-reset would help?
Cheers
Hello,
I have sent my gnexus off to be repaired this week and recently started to use my old milestone until my other phone is repaired. Phone was working fine, a little slow to my nexus but it was better than nothing. I was checking my emails and stuck my phone in my pocket to cross the street, when I pulled it out again, the screen would light up (glow) but the screen was black, I tried pulling the battery and rebooting but to no avail. I can feel the phone vibrate when I slide my finger across to unlock it and tap icons, but nothing is being displayed. I'm wondering if anybody else has had something like this happen and if it is possible to fix relatively easily?
If you don't get anything on the screen anymore I'm afraid it's a hardware failure.
Maybe the connector cable is broken (partially), I guess...
I guess Eiertschik is right.
In the boot process, does the M logo show up?
So I recently cracked the screen on my HTC One m7. I bought a replacement screen and front housing. The screen was so far beyond repair that I couldn't shut off the phone prior to starting the replacement. I tried waiting for the phone to die but after two days I became impatient and did it anyway (essentially the phone lost power when I disconnected the battery). After transferring all parts into the new housing and being what I though as diligent putting all parts and connections back in their place, tried to power the phone back on. all that happens is that the back and home buttons flash and then I hear what sounds like the audio for when the phone powers on. The screen stays black and then phone doesn't technically turn on. I know this because I have missed messages and the green led light would be flashing if it was. Therefore, at this point I'm not certain that the new screen works or if I've connected it right. I've tried the numerous boot tricks with the volume buttons, nadda. I have had the phone on a charger for a full day and the same problems. (Disclaimer: I don't have the original charger, but I have been using this one for a long time). I do see the red charging led if I wiggle the charger in the input, but also just recently I saw a green led when doing this, which when the phone was working was a sign that it was fully charged. If anyone has a solution to my problem that would be great. I'm also interested on what's wrong, why this is happening, what might have caused this behavior? What do the flashing home and back buttons mean?
Howdy,
I've had the same problem, but my phone was shutdown allready. When I replaced the front screen, the phone won't boot. I would like to know if its anyway to get the files from sdcard down?
Thanks for the support!
Hey guys,
I've searched and tried seemingly everything, but can't find a solution to this problem. A few months ago, my cousin dropped her Z3C on the floor; the screen cracked and stopped working. I got and installed a replacement screen, but it doesn't work. When I first turned it on (after charging the phone for several hours), the display was off, but I could touch the screen and I would get haptic feedback.
When I do a soft reset (Vol Up + Power), it vibrates 3 times, but the screen still doesn't display anything. I've pressed the little yellow reset button next to the SD slot, which also causes it to vibrate, but the screen still doesn't work. When I connect it to a PC, it is identified, though no folders are shown in the device. After I used the repair function of the Sony Xperia Companion, I now no longer receive haptic feedback when touching the screen. I also tried using flashtool, but to no avail.
Can anyone point me in a direction with how I should proceed?
Thanks!
It may be a motherboard issue now,try taking the phone apart and reconnecting the screen,but don't close it fully just connect it and see if anything happens,if it still doesn't work it could be a motherboard issue or you got a DOA screen
Make jumper on fuze like I did on 2nd picture and should be fine. Pictures here.
Chamelleon said:
Make jumper on fuze like I did on 2nd picture and should be fine.
Click to expand...
Click to collapse
Unfortunately, soldering for me isn't an option.
I've looked into the price of a motherboard for the Z3C and it's pricier than I expected. I might just cut my losses and try to sell it as is.
Thanks for all of the suggestions, guys!
I was replacing LCD in my Xperia. Tested the new screen with phone opened, everything was fine. Started assembly, one last test to make sure everything is working and the phone won't torn on. So I plug it in. Everything as usual. Red led. After some time I try to turn in on and it just won't. When I hold power button there is this short vibration like it is turning on just fine, but screen is black and I can keep turning it on ( single vibration over and over).
I tried both resets.
LED light is now green. So battery should be full.
Any idea what I could done wrong?
Old screen wont work either. It worked before.
The screen is broken. when i plug the phone to the computer it makes a sound. Any idea how to reapair this? i did not damage the screen.
Hi, bridge THIs coil. 100% working, done dozen times.