Database Develop

[Q] How to update my i9000m with 2.1?

First guys, sorry if I'm in the wrong section or repeat thread. I just got a Galaxy i9000m from Bell with 2.1 on it and I've passed two nights reading threads and I'm confused. I only have a mac and kies doesn't work for me. I just rooted it and I've download Rom Manager. From now, can I load any roms with Rom manager? I mean can I put a 2.3 rom on internal sd card and load it with RM and it will install? Thanks for any advise, I'll keep searching but i'm so confused and I'm afraid of bricking it.

quick answer... no
you need to be able to update things like bootloaders etc... this usually only happens using kies or odin... I do not have a mac so I cannot answer on how you can update, but i know you cannot do it just on your phone.. a bell mobile store will update it for you if you take it in, it only takes a few mins.

Thanks a lot for your time!!! You def stopped me from bricking it. I was lost
I don't want to bother you but do you know if I can upgrade directly from 2.1 to 2.3? Just to be sure, things I need is the rom, a FW with bootloaders, a kernel, install all this with Odin? I may try your configuration with Juwe's since we have the same phone. thanks again!

I'm not sure about going right from 2.1 to 2.3 but it is maybe worth your while to go to 2.2 and then to 2.3.. it's like a whole extra 5 mins. Just setup an account at Samfirmware.com
Get the i9000UGKC1 downloaded... it is the Bell stock 2.2 flash to that first... and un-root your phone using superoneclick. Quick reading tips to look-up
-how to get 850 modem back (important for bell users)
-flashing modems only
-Superoneclick
-Gingerbread bootloaders
Do alot of reading about gingerbread roms before you upgrade, this ROM is good that I'm on... you just have to make sure you flash a stock JVH with bootloaders or it will mess something up.. not sure what, I just followed the directions.

thanks for the tip!!! So I always have to be unroot to flash a firmware (2.1 to 2.2)?
I'm gonna stick to 2.2 for now. But I have a question...I download the i9000gkc1 FW and the pit 512. But am I supposed to have a PDA, CSC, and PHONE to put in Odin? Cause I only have i9000gkc1_homebinary.tar and if I extract it, it only gave me files like modem.bin, sbl.bin, factoryfs.rfs...
Million thanks!!!

For 2.2 alot of the stock firmwares there is only one file, the PDA. This file contains the modem and csc files... this is not the case with 2.3
So just flash the PIT and the PDA and flash the pda as the .tar file

Heimdall works fine on mac. But really can't you just use a friend's windows PC for 15 minutes to upgrade with kies? It's by far the easiest way to upgrade to KC1 (2.2)
2.3.3 isn't released yet in Canada so it's not available through kies (at least not without a hack)
If you want to flash 2.3.3, I would use the gingerbread starter (flash it trough heimdall, kernel and boot loaders only) and then flash any 2.3.3 ROM through clockworkmod recovery.

Super!! I'm gonna try that. Do you know if I should un-root before installing this 2.2 FW? Do I have to check re-partition? thanks again my friend!!!

thanks!!! I used my friend's pc but I wasn't able to install kies...always get an internet error. I might try with another one but I think I'm gonna use Odin since I heard kies has a lot of bugs. After installing 2.2, I'll def check for your GB starter tip. Thx for your help!!!

You can flash from 2.1 or 2.2 right to 2.3 without a "starter", the phone doesn't care. This is assuming you're flashing with odin or heimdall. If you're flashing a cooked rom from the development section, then it might not hurt...
Having said that, I've flashed 2.1, flashed speedmod and restored a 2.3 cwm backup and it has always worked fine.

he has to make sure he gets the 2.3 bootloaders

Thanks guys for all your help!! I really appreciate! Now I will update 2.1 to 2.2 using Odin but can you check if I'm doing it right or missing something.
So I have the FW i9000GKC1_homebinary.tar that I would place in PDA in Odin. I'll put the the 512 pit in the PIT in Odin. Start the process.
- Should I UN-check the re-partition box?? The only things checked are auto-reboot and F. reset time...?
- Should I unroot it before flashing?
- Do I remove my sim card?

Alot of people suggest removing your ext-sd and SIM (I hardly ever do)but it's not a bad practice
I usually check re-partition with 512 pit and always leave reboot and Freset checked
you do not need to un-root, after flash your phone will be un-rooted and you will need to use superoneclick program to root phone. Just search for it in the forum/google/youtube

dlockhart said:
he has to make sure he gets the 2.3 bootloaders
Click to expand...
Click to collapse
Exactly, and I would also make sure to upgrade boot loaders when upgrading to KC1. The i9000m had issues with some old boot loaders (like no download mode or scdard failures)

I should upgrade bootloaders for 2.2?? I dont really know what bootloaders are exactly for. If I need it before installing 2.2, can you tell me which one do I need? You guys lost me I use Odin3 v.1.7 and I have no bootloader box. I downloaded v.1.82 that has Bootloader option but I think its for another device version, no? Are you guys talking about that or the little square box "phone bootloader update"? I was ready to go but now I'm not so sure....

There are two files sbl.bin (secondary boot loader) and boot.bin (primary boot loader). When you upgrade with KIES the bootloaders get updated too.
You can use heimdall on your Mac to update to KC1 with the boot loaders. But sometimes when you download a ROM the boot loaders aren't included so check that first.
With ODIN 1.7 you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes you have to check the boot loader check box. But You must still check that sbl.bin and boot.bin are in your tar file.

thanks!!! So I unrar my .tar file and I only have Sbl.bin, modem.bin, factoryfs.rfs, cache.rfs, param.lfs, zimage. I don't have the boot.bin file you told me. Can I still check the "phone BL udpate" box or it won't work? What should I do at this point?

Hum, probably that there is no need for a primary bootloader update for KC1 then. You can still check it.

CRAP!!! I flash it but it tells me succeed 1/failed 1. Now it boots, shows the galaxy s i9000m logo, then goes to the big S logo and turns has a black screen. And the phone vibrates like evry 30 sec with black screen on. I took a picture of what I did and attached it. Is my phone broken? Can you help me please???

can you boot in download mode? (vol down + home + power)
I think you should flash modem and CSC. Especially since you repartitionned.

[Q] Flashing GingerBread 2.3.3 DXJPE Firmware

Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.

and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?

Roszaidee said:
Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.
Click to expand...
Click to collapse
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!

Ironically, I just flashed mine with the one found on samfirmware.com as I needed to send my unit back to Samsung for RMA on the battery, (battery kept on shutting down for no reason) and it worked just fine. Phone, CSC was all there. They gave it the once over and actually "reformatted" it for me, just to diagnose in case it wasn't a software issue. Lo and behold, it shut down on them right after the "reformatting" and confirmed my issues for them!
Just follow the restocking part of the guide found on Teamovercome.net, but instead of using the standard JQ1.tar file we provided, just use the tar file that came from samfirmware and you should be alright. That's what I did anyway, and it was all fine.
Just remember to do change the CSC from the Korean one to your appropriate market's CSC. The Malaysian CSC was XME.

Roszaidee said:
and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?
Click to expand...
Click to collapse
If i remember correctly, after flashing the firmware, go to recovery mode, it will do some initialisation and once it's done, you do a reboot, you should see the pda & csc..

bongski55 said:
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!
Click to expand...
Click to collapse
tried flashing DXJK2 but it keeps on rebooting at samsung logo.

OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.

cymagnus said:
OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.
Click to expand...
Click to collapse
Thanks alot! It works
Sent from my GT-P1000 using XDA Premium App

Can someone upload the P1000DXJPE rom from samfirmware.com ? Its too slow, impossible to download the firmware from hotfile.com

What link do you prefer?
Sent from my GT-P1000 using XDA Premium App

Roszaidee said:
What link do you prefer?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Which ever which is fast and reliable... such as
..filesonic..sg
..megaupload..com
..mediafire..com
Thanks man.

Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL

Roszaidee said:
Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL
Click to expand...
Click to collapse
Thanks man. The download is fantastic at 450KB/s.
Download completed.

can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pls help me

ameerali19 said:
can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
pls help me
Click to expand...
Click to collapse
thanks friends
i got the file from http://hotfile.com/dl/120112727/77ed932/P1000DXJPC_OLBJPC_DXJPC.rar.html

Odin hangs flashing factoryfs.img [while downgrading from ICS leak)

Hello everyone
I hope one of you might be able to help. I wanted to downgrade my Note to stock GB because I lost root on an ICS leak. I have done this successfully before but today pc odin suddenly hangs in the middle of flashing the factoryfs.img of a stock kernel (I used this one but tried others as well: N7000XXKJ4_N7000VD2KJ1_N7000XXKJ4_HOME.tar.md5).
Because of this I can now only boot the phone into download mode. I have also tried to use a pit file (as you can see in the screenshot, where I used this file: Q1_20110914_16GB.pit), because I thought the partitions might have been corrupted or changed by the ICS ROM but this didn't help either.
Do you have experienced this before? What else could I try?
Thanks a lot for any help
suxi
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

+1 same issue here

your Re-Partition is on.
you phone is dead.

avetny said:
your Re-Partition is on.
you phone is dead.
Click to expand...
Click to collapse
OMG what's happening today, people's Notes are dying in droves!!!

razorhanny said:
OMG what's happening today, people's Notes are dying in droves!!!
Click to expand...
Click to collapse
yes it sad, people need to carefully read the instructions

suxi said:
Oops, sorry for posting this in the wrong section. Mods, please delete! Thanks.
Hello everyone
I hope one of you might be able to help. I wanted to downgrade my Note to stock GB because I lost root on an ICS leak. I have done this successfully before but today pc odin suddenly hangs in the middle of flashing the factoryfs.img of a stock kernel (I used this one but tried others as well: N7000XXKJ4_N7000VD2KJ1_N7000XXKJ4_HOME.tar.md5).
Because of this I can now only boot the phone into download mode. I have also tried to use a pit file (as you can see in the screenshot, where I used this file: Q1_20110914_16GB.pit), because I thought the partitions might have been corrupted or changed by the ICS ROM but this didn't help either.
Do you have experienced this before? What else could I try?
Thanks a lot for any help
suxi
Click to expand...
Click to collapse
Reset computer
endprogess kies (kiesELDR and kiestray..) in task manager.
Reoot again downloader
open odin
reconnec phone via usb port (in main ).
and reflash.
googluck.

Why dont people make backups before flashing new roms
Takez 5-6min in CWM to make a backup of your current rom
If any thing goes wrong or you just want to go back to the old rom you just run the restore and you are back up and running in under 10min

Shouldnt have needed Odin to downgrade, if ya created a firmware folder on ya sd and followed ketans cwm guide to flash bk to rooted stock ya wouldt have an issue.
As for odin you flashed wrong, previous comments are right, your re-partition shouldnt have been on if you were flashing the all in one firmware thru pda, and you certainly shouldnt have been using the pit file to do that.
Hope you sorted the issue out, seriously, its risky business, the guides here on xda are perfect working guides, make sure you read them thoroughly and familiarize yourself with what your doing beforehand.
Also noted your using odin 1.85, i had issues with this, i reverted to odin 1.83 and have never had a problem since, give it a try, but if ya can enter download mode then ya shouldnt have an issue, i would reccomend downloading firmware KL8, set the pit file, re-partition and the other 2 leave ticked, set modem, code and multi csc, and flash and dont touch it till its finished and reboots, after that ya can then go and do whatever, but this should work, i downgraded from ics to kl8 no problem with odin 1.83.

Relax fellas! Your Notes are not committing mass suicides... just yet. Use the pit file attached below to flash your favorite (rootable) stock Gingerbread ROM. Just hit the "PIT" button in ODIN and select the pit file. And ALSO the PDA field should also be selected. Just use one of the guides. You need to extract the rar to get the pit file. I hope this helps.
Edit. When you select the PIT file, the repartition box will check itself, don't uncheck it.

acidburn89 said:
Relax fellas! Your Notes are not committing mass suicides... just yet. Use the pit file attached below to flash your favorite (rootable) stock Gingerbread ROM. Just hit the "PIT" button in ODIN and select the pit file. And ALSO the PDA field should also be selected. Just use one of the guides. You need to extract the rar to get the pit file. I hope this helps.
Edit. When you select the PIT file, the repartition box will check itself, don't uncheck it.
Click to expand...
Click to collapse
I Tried your PIT file. Does it really take long to SET PARTITION?

same issues here. anyone can confirm that the PIT file is working?

Good morning and thanks a lot for your help!
your Re-Partition is on.
Click to expand...
Click to collapse
Only as a last resort. As I wrote, before I tried flashing several ROMS without PIT files and got stuck the exact same way.
yes it sad, people need to carefully read the instructions
Click to expand...
Click to collapse
My words and I followed exact instructions from a different post.
Reset computer
endprogess kies (kiesELDR and kiestray..) in task manager.
Reoot again downloader
open odin
reconnec phone via usb port (in main ).
and reflash.
Click to expand...
Click to collapse
I tried this several times with no success.
Why dont people make backups before flashing new roms
... If any thing goes wrong or you just want to go back to the old rom you just run the restore and you are back up and running in under 10min
Click to expand...
Click to collapse
I do, but unfortunately instructions from a different thread advised to do it "the odin way".
Shouldnt have needed Odin to downgrade ...
Click to expand...
Click to collapse
graemeg, yes, probably, but those instructions ...
i reverted to odin 1.83 and have never had a problem since,
Click to expand...
Click to collapse
I'll do that, too. Thanks.
i would reccomend downloading firmware KL8
Click to expand...
Click to collapse
I did this with LA1, it also includes the different files.
Use the pit file attached below
Click to expand...
Click to collapse
Thank you for the link. That's the exact file I used before.
Any other ideas?
Thanks for your help
suxi

Had the same problem.
Have managed to get CWM back - but I have made no back-ups to restore. Stupid me.

cemstro said:
Had the same problem.
Have managed to get CWM back - but I have made no back-ups to restore. Stupid me.
Click to expand...
Click to collapse
how did you get cwm back??

ArchaosAngel said:
how did you get cwm back??
Click to expand...
Click to collapse
By flashing CF-Root kernel through ODIN.

cemstro said:
By flashing CF-Root kernel through ODIN.
Click to expand...
Click to collapse
are u able to flash a rom and get it to work?

ArchaosAngel said:
are u able to flash a rom and get it to work?
Click to expand...
Click to collapse
Tried flashing multpile ROM's (GB and ICS), but even when they do succesfully finish I get stuck when booting at the "Samsung Galaxy Note" screen - with a nice yellow triangle.
So I'm done with it for now. Not trying anything new, until the guys in the Dev section find a way to fix it.

suxi said:
I do, but unfortunately instructions from a different thread advised to do it "the odin way".
Click to expand...
Click to collapse
I am one of those who flashed TRR 1.6 with the angelom 1.2 kernel,
and while it didn't, luckily enough, brick my phone, it caused all sorts
of weird stuff, like gmail crashing etc.
I then flashed, as advised in the TRR thread, abyssnote 3.9, plus restored
a RR v22 backup, I'm back just fine now.

armic said:
I Tried your PIT file. Does it really take long to SET PARTITION?
Click to expand...
Click to collapse
Take Seconds..... been there done that.....

MrIT said:
Reset computer
endprogess kies (kiesELDR and kiestray..) in task manager.
Reoot again downloader
open odin
reconnec phone via usb port (in main ).
and reflash.
googluck.
Click to expand...
Click to collapse
Hi
I did not run it the way you train is the factoryfs stops
My mobile partition is unmount
Help me

FRP LOCK ON Can't ODIN firmware... Lord help me.

Canadian NOTE5 here, I forgot to unclick the OEM Lock in the developer options and now I cannot boot up, I cannot flash ODIN stock firmware from Canada, although only Puerto Rico seems to exist for SM-N920W8 etc... I get the error HIDDEN.IMG then FAIL
I cannot flash TWRP because I get BLOCKED BY FRP LOCK.
Smart Switch does not support my device. So that doesn't work either.
I have tried ODIN TMOBILE firmware, that fails right away.
I have had 10 different rooted devices without a hitch, is this my first brick ever?
Do I have to wait for different firmware?
Anyone? Happy to buy anyone a beer or two who can assist me!
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model Number: N920W8
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
cm.bin
boot.img
recovery.img
system.img
cache.img
hidden.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)

I guess your best bet is to wait for official Bell firmware. But it's strange that I never came across that. Did you read the instructions on getting the phone rooted? Did you enable the OEM unlock?

Did you try Samsung Kies software.
Sometimes it can restore phone to original.

LouK said:
Did you try Samsung Kies software.
Sometimes it can restore phone to original.
Click to expand...
Click to collapse
jqmalang said:
I guess your best bet is to wait for official Bell firmware. But it's strange that I never came across that. Did you read the instructions on getting the phone rooted? Did you enable the OEM unlock?
Click to expand...
Click to collapse
Solved! I reflashed the firmware and flashed the hidden.img separately in Odin and success!
Sent from my Gorgeous Note5

Brava27 said:
Solved! I reflashed the firmware and flashed the hidden.img separately in Odin and success!
Sent from my Gorgeous Note5
Click to expand...
Click to collapse
how please??

edwardob said:
how please??
Click to expand...
Click to collapse
You need to flash firmware from your provider.

Brava27 said:
You need to flash firmware from your provider.
Click to expand...
Click to collapse
how to flash
" I reflashed the firmware and flashed the hidden.img separately in Odin"
do you remove hidden .img from firmware..
how did you do it please??

edwardob said:
how to flash
" I reflashed the firmware and flashed the hidden.img separately in Odin"
do you remove hidden .img from firmware..
how did you do it please??
Click to expand...
Click to collapse
Why do you want to remove hidden.img? You only have to do this if you get an error message fail hidden.img

Brava27 said:
Why do you want to remove hidden.img? You only have to do this if you get an error message fail hidden.img
Click to expand...
Click to collapse
thats right/........so how do you do it?

heres mine
similiar problem different file
anyone any ideas?

my mobile phone, same as you,how can i do? i am using note 5 n9200,what i need to download? 1,odin,and other?can you tell me the step,thank you very much

same here SM-N920W8
Please theres a step by step guide to flash tru odin ,say solved but no how to thanks

pls help us i have the same on my note 5 N9200 and i tryd evrythink so if its working to you you have me some hoop that i dont loose 800 dollar on my note 5

Ekinz1219 said:
my mobile phone, same as you,how can i do? i am using note 5 n9200,what i need to download? 1,odin,and other?can you tell me the step,thank you very much
Click to expand...
Click to collapse
did u solve the problem? i have the same device as you do, and i have the same situation.
After tried almost every Stock Rom, i still get stuck after boot.img.

This problem is because you forgot to unlock bootloader from developper options.
Reflash the official latest stock firmware with odin, then unlock the bootloader and reflash what ever you want after.

edwardob said:
similiar problem different file
anyone any ideas?
Click to expand...
Click to collapse
Ekinz1219 said:
my mobile phone, same as you,how can i do? i am using note 5 n9200,what i need to download? 1,odin,and other?can you tell me the step,thank you very much
Click to expand...
Click to collapse
TIAR2018 said:
Please theres a step by step guide to flash tru odin ,say solved but no how to thanks
Click to expand...
Click to collapse
andixxqaz said:
pls help us i have the same on my note 5 N9200 and i tryd evrythink so if its working to you you have me some hoop that i dont loose 800 dollar on my note 5
Click to expand...
Click to collapse
danielweng said:
did u solve the problem? i have the same device as you do, and i have the same situation.
After tried almost every Stock Rom, i still get stuck after boot.img.
Click to expand...
Click to collapse
Download the latest stock firmware for your device model, and extract from it the file called hidden.img, rename that file as hidden.img.tar Now open Odin and try to install the firmware you downloaded, when you see the error in Odin, load the file hidden.img.tar on AP and flash it. Now turn on the phone and wait around 5 minutes, it should boot up.
Please note that this will only work if the error shown in Odin is:
hidden.img
FAIL!

Brava27 said:
Solved! I reflashed the firmware and flashed the hidden.img separately in Odin and success!
Sent from my Gorgeous Note5
Click to expand...
Click to collapse
Hi, I had the same issue I tried rooting my note 5 and it failed and now i'm stuck
i'm really freaking out I paid a lot of money for it,
odin says " NAND write failed"
can you please help me ?!

m7mdas3d said:
Hi, I had the same issue I tried rooting my note 5 and it failed and now i'm stuck
i'm really freaking out I paid a lot of money for it,
odin says " NAND write failed"
can you please help me ?!
Click to expand...
Click to collapse
You need the correct firmware for your device from sammobile.com

Brava27 said:
You need the correct firmware for your device from sammobile.com
Click to expand...
Click to collapse
I have the exact one, I have downloaded it before rooting in case something wrong happened, which did :crying: !!!
still fails at the NAND write

m7mdas3d said:
I have the exact one, I have downloaded it before rooting in case something wrong happened, which did :crying: !!!
still fails at the NAND write
Click to expand...
Click to collapse
You need to use the odin Odin3 v3.10.7.1

Help s5 died

Good morning and Happy Easter to all .
Help me , mine galaxy s5 is dead after i install a rom (hard brick) it stard with SD card but when i try to install stock with Odin dont work plis help me i dont have money for buy another phone
Thanks to all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You tried flashing stock with pit file?
tapatalked

rajman said:
You tried flashing stock with pit file?
tapatalked
Click to expand...
Click to collapse
Yup

emanuele28dl said:
Yup
Click to expand...
Click to collapse
What does it say then?
tapatalked

rajman said:
What does it say then?
tapatalked
Click to expand...
Click to collapse
Odin make error and fail
Inviato dal mio Nexus 6P utilizzando Tapatalk

emanuele28dl said:
Odin make error and fail
Inviato dal mio Nexus 6P utilizzando Tapatalk
Click to expand...
Click to collapse
At which point. Copy paste log.
tapatalked

rajman said:
At which point. Copy paste log.
tapatalked
Click to expand...
Click to collapse
Now in with mine friend out of house,because i use his Nexus 6p, i remember whent try to install make fail because the phone block install when i return i send image
Inviato dal mio Nexus 6P utilizzando Tapatalk

Hello,
flash the original firmware, after odin says "fail", pull out the usb cable , reset odin, choose the pit file, plug in usb cable and flash.

lladwein said:
Hello,
flash the original firmware, after odin says "fail", pull out the usb cable , reset odin, choose the pit file, plug in usb cable and flash.
Click to expand...
Click to collapse
I try and fail , it is possible I wrong pit and firmware ? Because I download 5.0 and I found a random pit online (for mine phone )

lladwein said:
Hello,
flash the original firmware, after odin says "fail", pull out the usb cable , reset odin, choose the pit file, plug in usb cable and flash.
Click to expand...
Click to collapse
I run flash with odin:
Odin v.3 engine (ID: 3) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
The flash stops with S5 on the screen messages:
ODIN: flash read failure

rajman said:
At which point. Copy paste log.
tapatalked
Click to expand...
Click to collapse
Log:
I run flash with odin:
Odin v.3 engine (ID: 3) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
The flash stops with S5 on the screen messages:
ODIN: flash read failure

Seems like your not putting pit file and ticking repartition button.
tapatalked

rajman said:
Seems like your not putting pit file and ticking repartition button.
tapatalked
Click to expand...
Click to collapse
But i put in , it is possible i wrong pit and firmware , can everyone else send me the link for pit and firmware ... Because I try 1 but I found a random web site ?

I have a pit for kltespr ive never used it so I don't what firmware its for

cospalet said:
I have a pit for kltespr ive never used it so I don't what firmware its for
Click to expand...
Click to collapse
I think it not work on mine

PIT files are not for specific firmwares, they are for specific model S5s
G900M
G900F
G900T
etc etc

*Detection* said:
PIT files are not for specific firmwares, they are for specific model S5s
G900M
G900F
G900T
etc etc
Click to expand...
Click to collapse
Ah ... Because I try 15 different pit for mine g900f

emanuele28dl said:
Ah ... Because I try 15 different pit for mine g900f
Click to expand...
Click to collapse
G900F PIT
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Other PIT files here
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2

*Detection* said:
G900F PIT
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Other PIT files here
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Click to expand...
Click to collapse
I try all of this and don't work

emanuele28dl said:
I try all of this and don't work
Click to expand...
Click to collapse
Hardware failure by the looks of it, flash memory corrupted / failed
Might be a way to manually force partition it via shell / adb if you can get the PC to see it, but you'd have to Google for that