Database Develop

[GT-P31xx] CF-Auto-Root

Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !
CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.
Donate
CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...
What's installed
- SuperSU binary and APK
- Stock recovery
Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).
Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.
Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.
Not included - Triangle Away
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)
Not included - adbd Insecure
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)
CF-Auto-Root homepage
http://autoroot.chainfire.eu/
CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

ODIN Installation (detailed)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, hold VolUp+Power (for several seconds) to boot into recovery manually. This will start the install process.
New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!
You may now optionally want to install and run Triangle Away to reset the flash counter.

Download
2013.05.20 --- CF-Auto-Root
SuperSU: v1.30
Download:
GT-P3100: CF-Auto-Root-espressorf-espressorfxx-gtp3100.zip
GT-P3110: CF-Auto-Root-espressowifi-espressowifixx-gtp3110.zip
GT-P3113: CF-Auto-Root-espressowifi-espressowifiue-gtp3113.zip
--- History ---
2013.05.20: SuperSU v1.30
2013.02.20: SuperSU v1.05
2012.12.02: SuperSU v0.98
2012.10.26: SuperSU v0.96

Thanks Chainfire!!! You are the man.
I will try later on my P3110.

We love you chainfire. Thanks.

I've bought 3 of your apps so far. Thank you for all of your hard work.
Sent from my GT-P3113 using XDA Premium HD app

Flashed without problems with mobile Odin.
But everytime I boot it shows Android system update ... open aplications for about 5 seconds.
Sent from my GT-P3110 using Tapatalk 2

Thank you CF for this recovery method...hope you have taken care of the new stock recovery protection scheme that seems to be in place for JB 4.1.x.
I bought you one of the best app "ChainFire3D" & appreciate all the work you are doing for Android gadgets......all of your tools are brilliant work.
Wish I would have programming skill like yours...LOL

Samsung noob here, what HOME button and what battery?
Sent from my GT-P3113 using xda premium

joe2262 said:
Samsung noob here, what HOME button and what battery?
Click to expand...
Click to collapse
Sorry, thats the phone procedure. I have adjusted the text for tablets

How long does take? 25+ min my tab still says "Do not turn off target"
What should I do?

joe2262 said:
How long does take? 25+ min my tab still says "Do not turn off target"
What should I do?
Click to expand...
Click to collapse
Do you have a blue progress bar on screen below the Android ?
If it's full, just reboot the phone.

45 min, may have a problem? HELP!

Just reboot your phone. Pull the battery, hold power button, whichever works. Then see what happens.
DONT PANIC. Nothing bad has happened.

Chainfire said:
Do you have a blue progress bar on screen below the Android ?
If it's full, just reboot the phone.
Click to expand...
Click to collapse
No.

joe2262 said:
No.
Click to expand...
Click to collapse
Ehh, silly question, did you use ODIN and uploaded the file? Because then you should definitely get a progress bar.

Chainfire said:
Just reboot your phone. Pull the battery, hold power button, whichever works. Then see what happens.
DONT PANIC. Nothing bad has happened.
Click to expand...
Click to collapse
it's rebooted. Try again?
---------- Post added at 03:10 PM ---------- Previous post was at 03:04 PM ----------
Chainfire said:
Ehh, silly question, did you use ODIN and uploaded the file? Because then you should definitely get a progress bar.
Click to expand...
Click to collapse
started ODIN , clicked PDA, selected file and hit START.

And nothing happened in ODIN, or on-screen?

Chainfire said:
And nothing happened in ODIN, or on-screen?
Click to expand...
Click to collapse
Not the tab, but ODIN had a bunch in the lower left. succeed 0/failure 0 and the last was please wait.
I think it's a driver problem as I did root something else a few weeks ago? But there was a SAMSUNG driver in device manager with no exclamations.

Was a driver problem in win7 64b. Rooted now and Ti backup works great. Thanks a bunch.

AT&T SM-G730A ROM issues? Please Help!

I'm a newbie with the rooting and custom rom installation, I've actually never done one before attempting in on my phone a SM-G730A mini S3, I have searched online and was unable to find the factory rom for this device or instructions how to install.
I was able to root my phone using king root, Then I started removing all the factory programs that ill never used. It was great until a few days ago I removed 2 programs that affected my phone operates. It now gets stuck on the at&t screen when powering on, but the funny thing is that if someone calls me, the screen pops up for me to answer.
Issues with my phone: gets stuck on at&t screen, no home screen at all, only way to access apps is through S voice.
I first started looking into the custom rom because I wanted wi-fi calling since the phone signal is low on this phone. I appreciate any help on this. Thanks

rotorholic said:
I'm a newbie with the rooting and custom rom installation, I've actually never done one before attempting in on my phone a SM-G730A mini S3, I have searched online and was unable to find the factory rom for this device or instructions how to install.
I was able to root my phone using king root, Then I started removing all the factory programs that ill never used. It was great until a few days ago I removed 2 programs that affected my phone operates. It now gets stuck on the at&t screen when powering on, but the funny thing is that if someone calls me, the screen pops up for me to answer.
Issues with my phone: gets stuck on at&t screen, no home screen at all, only way to access apps is through S voice.
I first started looking into the custom rom because I wanted wi-fi calling since the phone signal is low on this phone. I appreciate any help on this. Thanks
Click to expand...
Click to collapse
Any guru's in here that can help?

rotorholic said:
Any guru's in here that can help?
Click to expand...
Click to collapse
I think you should reflash your current firmware version via Odin3. You can get stock ROMs from sammobile.com/firmware. You will lose your root access and you will get these system apps back what you deleted before.

I download it to my SD card and then what? excuse my newbie questions

those stock roms from sammobile youll need to flash via odin / heimdall

rotorholic said:
I download it to my SD card and then what? excuse my newbie questions
Click to expand...
Click to collapse
Firmwares from SamMobile are only flashable via Odin3 on your PC/Laptop. Move your downloaded firmware to your PC/Laptop and unzip it. Move the ...HOME.tar.md5 file to your desktop.
1. Now download Odin3 and install the drivers for your phone.
2. Open Odin3 as Admin to avoid errors or "Fail" messages while flash. (If you use Windows XP then open Odin like always) and make sure only "Auto reboot" and "F.reset" are checked.
4. Close all Samsung Kies process in task manager to avoid errors. (ignore this if you don't have Kies installed)
5. Tap on PDA/AP and choose the ...HOME.tar.md5 file (wait until Odin finish check the MD5 check sum)
6. Now on your phone. Turn off your device. Then hold volume down + home button + power button till you see a "Warning!!" screen and continue with volume up.
7. Connect your device to your PC/Laptop via USB.
8. Wait until Odin detect your device. (You will see a blue box) If your PC/Laptop install the drivers again then wait a moment.
9. If everything is OK then you can start flashing. (A flash process take up to 10 Min, so be patient)
10. Now your phone should reboot and you're done.
Don't forget you will lose ROOT access and you will get your system apps back what you deleted before.
DO IT AT YOUR OWN RISK.
For more information visit this thread : http://forum.xda-developers.com/showthread.php?t=2159660

Success!
xXPR0T0TYPEXx said:
Firmwares from SamMobile are only flashable via Odin3 on your PC/Laptop. Move your downloaded firmware to your PC/Laptop and unzip it. Move the ...HOME.tar.md5 file to your desktop.
1. Now download Odin3 and install the drivers for your phone.
2. Open Odin3 as Admin to avoid errors or "Fail" messages while flash. (If you use Windows XP then open Odin like always) and make sure only "Auto reboot" and "F.reset" are checked.
4. Close all Samsung Kies process in task manager to avoid errors. (ignore this if you don't have Kies installed)
5. Tap on PDA/AP and choose the ...HOME.tar.md5 file (wait until Odin finish check the MD5 check sum)
6. Now on your phone. Turn off your device. Then hold volume down + home button + power button till you see a "Warning!!" screen and continue with volume up.
7. Connect your device to your PC/Laptop via USB.
8. Wait until Odin detect your device. (You will see a blue box) If your PC/Laptop install the drivers again then wait a moment.
9. If everything is OK then you can start flashing. (A flash process take up to 10 Min, so be patient)
10. Now your phone should reboot and you're done.
Don't forget you will lose ROOT access and you will get your system apps back what you deleted before.
DO IT AT YOUR OWN RISK.
For more information visit this thread : http://forum.xda-developers.com/showthread.php?t=2159660
Click to expand...
Click to collapse
I was finally able to load the stock rom via Odin3 v3.09, I re-rooted my phone and removed all of the att pre-loaded junk software,
I was stuck for a few days since my pc was not finding the phone so I re-installed the Samsung drivers and it worked!
Now im hoping to find a kitkat rom to install, Thanks for all your help guys:good:

touchwiz
rotorholic said:
I'm a newbie with the rooting and custom rom installation, I've actually never done one before attempting in on my phone a SM-G730A mini S3, I have searched online and was unable to find the factory rom for this device or instructions how to install.
I was able to root my phone using king root, Then I started removing all the factory programs that ill never used. It was great until a few days ago I removed 2 programs that affected my phone operates. It now gets stuck on the at&t screen when powering on, but the funny thing is that if someone calls me, the screen pops up for me to answer.
Issues with my phone: gets stuck on at&t screen, no home screen at all, only way to access apps is through S voice.
I first started looking into the custom rom because I wanted wi-fi calling since the phone signal is low on this phone. I appreciate any help on this. Thanks
Click to expand...
Click to collapse
You probably uninstalled touchwiz. You can try installing a theme from the app store that might work.

Newbie Help
I am getting ready to do a first attempt at rooting on a Samsung S3 mini, G730A. I don't know how to get the Samsung USB driver onto the desktop because I'm not sure where it's actually located. I downloaded the Samsung Driver Zip and it's loaded on my C: drive but didn't find anything is there that seemed specific to that phone. I did locate what appears to be the generic Android device USB driver for this phone through Device Manager and put that on the desktop but not sure that is the one that I'll need when I go root. Any suggestions?
Thanks

[Q&A] [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary

[Q&A] [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary
Q&A for [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Rooting GT-I9070
Wishing you a very Happy and progressive new year!!!
Hi Diego, please help me achieve rooting my phone..
pda i9070ddtes
phone i9070ddlf1
CSC Unknown
Region KST
But I from India and want to root this phone

jodha said:
Wishing you a very Happy and progressive new year!!!
Hi Diego, please help me achieve rooting my phone..
pda i9070ddtes
phone i9070ddlf1
CSC Unknown
Region KST
But I from India and want to root this phone
Click to expand...
Click to collapse
Its easy.....all you had to do was SEARCH !!
http://forum.xda-developers.com/showthread.php?t=2087424
EDIT: Flash the latest UBLPK (Argentina) Firmware, smoothest of all.via odin and then Root it with Shaan's Root package given in the above link.

rooting GT-I9070P
Hey, could you please help me root my phone
PDA: I9070PXXLF1
CSC: I9070PMOBLF1
region probably MOB (bought unlocked in Austria but originaly from A1)

REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?

knurd said:
REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?
Click to expand...
Click to collapse
which link /

DaksAnkit said:
which link /
Click to expand...
Click to collapse
http://bitshare.com/files/04xbtfk8/ROOTED_I9070VJLD1_I9070ZTMLD1.rar.html
impossible to download that, tried in every single browser

knurd said:
http://bitshare.com/files/04xbtfk8/ROOTED_I9070VJLD1_I9070ZTMLD1.rar.html
impossible to download that, tried in every single browser
Click to expand...
Click to collapse
yea . man seems like the file does not exist anymore, tell you what just root your latest firmware delete the bloatware / stock apps i think its pretty much the same .

DaksAnkit said:
yea . man seems like the file does not exist anymore, tell you what just root your latest firmware delete the bloatware / stock apps i think its pretty much the same .
Click to expand...
Click to collapse
The problem is that, i cant root it, my phone can't read sd card anymore, so I'm trying to root my device with odin, if I can at least change my recovery mode and read internal storage it would be great...

Root with odin , no sd card
knurd said:
The problem is that, i cant root it, my phone can't read sd card anymore, so I'm trying to root my device with odin, if I can at least change my recovery mode and read internal storage it would be great...
Click to expand...
Click to collapse
HERE : i think this will help you out , but be patience and use common sense when rooting also I AM JUST HERE TO HELP , so DO NOT BLAME ME IF YOU BRICK YOUR PHONE , BUT I CAN SAY THAT IF YOU FOLLOW STEPS YOU WON`T HAVE ANY TROUBLE,
DO DOWNLOAD ESSENTIALS BEFORE FOLLOWING STEPS, FIRTS READ ALL THEN MAKE YOU MIND HOW TO DO IT :
1: ORIGINAL FIRMWARE FROM HERE you will need it to extract original kernel after rooting, or if something goes wrong when rooting
2: SAMSUNG USB DRIVER FOR WIN/MAC.
Make sure that you have backup the data, apps and settings from your Samsung device such as SMS, MMS, Call Logs, Contacts, Images, Audios, Videos, Bookmarks, Wi-Fi, APN settings and MMS settings etc as this process is going to wipe every data from your device.
3. Check of security suites such as antivirus and firewall whether they are disabled on your Computer.
4. You need to turn on the Enable USB Debugging on your Samsung Galaxy S i9070. This can be done simply by following the path ‘Settings > Applications > Development > USB debugging’ and ticking the USB Debugging option box.
5. Please put your battery in charge and make sure that it was charged to at least 80%.
Advice: Before going to start the root process you must go to phone settings->click about phone and look for basedband version number. Note down that number in notepad and save it on the desktop.
Steps and Procedure for Rooting Samsung Galaxy S Advance I9070:
1. Download working ODIN FROM HERE AND Working root package only I9070 from attachement to PC.
2. Once you have downloaded the file, then you need to extract the zip file in the PC.
3. After extraction is done.
4. Launch the Odin application in the computer.
5. Turn off the device in order to enter into download mode. For that do like this press and hold the Volume Down + Home buttons together and Power On the device simultaneously. After 1 min you will get a download mode with green android robot image.
6. Connect your device to the Computer via USB data cable while Odin is open. Once your device get connected, ID:COM section turns yellow in colour. If it doesn’t than you need to reconnect your device.
7. In Odin tool you need to two select two files into their respective fields.
NOW YOU WIL ALSO BE NEEDING A PIT FILE , i have attached both version 8gb and 16 gb PIT FILE choose from there if 8gb then 8gb and vice-versa
8.Click PIT tab and then select the GT-I9070_EUR_XX_8G/16GB.pit file from the extracted folder.
Once you selected the file left side Re-partition filed will be tick marked automatically. So you need to uncheck it manually. For more idea see the below picture.
b) Click PDA section and then select the rootkernel.tar.md5.
c) You need to uncheck all other option except ‘Auto Reboot’ and ‘F Reset Time’.
Click on ‘Start’ button and wait for the process to get completed. The Samsung Galaxy S device will reboot automatically.
9. Now you must try to install Superuser and Busybox from Google Play Store . Once you installed both apps then your device will be rooted successfully. check using root checker app.
Time to switch back to stock original kernel basedband firmware version number. Because above we used kernel for rooting the device have some problems like sudden reboots and lags. So that you need to install exact kernel to the device again. BUT IF YOU DO NOT WANT TO DO ALL THAT , JUST INSTALL ANY CUSTOM ROM / CM11 /cm10 etc ,which has tuned own kernel you will not be needing any of this in the follwoing steps.
HERE READ THIS XDA FORUM TO EXTRACT YOUR ORIGINAL FIRMWARE KERNEL
AFTER THAT AGAIN FOLLOW STEPS
1. Run the Odin application again in the PC.
2.Turn off the device and Boot into Download mode. For that press and hold the Volume Down + Home buttons together and Power On the device.
3. Connect the device to PC via USB cable.
4. Click on PDA tab and select the file which you downloaded recently. I selected (YOURKERNEL).tar.md5 .
5. Click on Start and the process will be completed. The device will be reboot automatically.
That’s it your device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here:good:
good luck

DaksAnkit said:
HERE : i think this will help you out , but be patience and use common sense when rooting also I AM JUST HERE TO HELP , so DO NOT BLAME ME IF YOU BRICK YOUR PHONE , BUT I CAN SAY THAT IF YOU FOLLOW STEPS YOU WON`T HAVE ANY TROUBLE,
DO DOWNLOAD ESSENTIALS BEFORE FOLLOWING STEPS, FIRTS READ ALL THEN MAKE YOU MIND HOW TO DO IT :
1: ORIGINAL FIRMWARE FROM HERE you will need it to extract original kernel after rooting, or if something goes wrong when rooting
2: SAMSUNG USB DRIVER FOR WIN/MAC.
Make sure that you have backup the data, apps and settings from your Samsung device such as SMS, MMS, Call Logs, Contacts, Images, Audios, Videos, Bookmarks, Wi-Fi, APN settings and MMS settings etc as this process is going to wipe every data from your device.
3. Check of security suites such as antivirus and firewall whether they are disabled on your Computer.
4. You need to turn on the Enable USB Debugging on your Samsung Galaxy S i9070. This can be done simply by following the path ‘Settings > Applications > Development > USB debugging’ and ticking the USB Debugging option box.
5. Please put your battery in charge and make sure that it was charged to at least 80%.
Advice: Before going to start the root process you must go to phone settings->click about phone and look for basedband version number. Note down that number in notepad and save it on the desktop.
Steps and Procedure for Rooting Samsung Galaxy S Advance I9070:
1. Download working ODIN FROM HERE AND Working root package only I9070 from attachement to PC.
2. Once you have downloaded the file, then you need to extract the zip file in the PC.
3. After extraction is done.
4. Launch the Odin application in the computer.
5. Turn off the device in order to enter into download mode. For that do like this press and hold the Volume Down + Home buttons together and Power On the device simultaneously. After 1 min you will get a download mode with green android robot image.
6. Connect your device to the Computer via USB data cable while Odin is open. Once your device get connected, ID:COM section turns yellow in colour. If it doesn’t than you need to reconnect your device.
7. In Odin tool you need to two select two files into their respective fields.
NOW YOU WIL ALSO BE NEEDING A PIT FILE , i have attached both version 8gb and 16 gb PIT FILE choose from there if 8gb then 8gb and vice-versa
8.Click PIT tab and then select the GT-I9070_EUR_XX_8G/16GB.pit file from the extracted folder.
Once you selected the file left side Re-partition filed will be tick marked automatically. So you need to uncheck it manually. For more idea see the below picture.
b) Click PDA section and then select the rootkernel.tar.md5.
c) You need to uncheck all other option except ‘Auto Reboot’ and ‘F Reset Time’.
Click on ‘Start’ button and wait for the process to get completed. The Samsung Galaxy S device will reboot automatically.
9. Now you must try to install Superuser and Busybox from Google Play Store . Once you installed both apps then your device will be rooted successfully. check using root checker app.
Time to switch back to stock original kernel basedband firmware version number. Because above we used kernel for rooting the device have some problems like sudden reboots and lags. So that you need to install exact kernel to the device again. BUT IF YOU DO NOT WANT TO DO ALL THAT , JUST INSTALL ANY CUSTOM ROM / CM11 /cm10 etc ,which has tuned own kernel you will not be needing any of this in the follwoing steps.
HERE READ THIS XDA FORUM TO EXTRACT YOUR ORIGINAL FIRMWARE KERNEL
AFTER THAT AGAIN FOLLOW STEPS
1. Run the Odin application again in the PC.
2.Turn off the device and Boot into Download mode. For that press and hold the Volume Down + Home buttons together and Power On the device.
3. Connect the device to PC via USB cable.
4. Click on PDA tab and select the file which you downloaded recently. I selected (YOURKERNEL).tar.md5 .
5. Click on Start and the process will be completed. The device will be reboot automatically.
That’s it your device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here:good:
good luck
Click to expand...
Click to collapse
couldn't find PDA on Odin3 v3.10, i installed with Odin3 v1.87 and i got bootloop after step 8c

@knurd : in latest version PA is same as PDA , AND DID ODIN SHOWED SUCCESS after finishing installation of root kernel ?
if you getting boot loop just go to recovery ,clear/delete cache and reboot 99 out of 100 times it solves bootloop.

DaksAnkit said:
@knurd : in latest version PA is same as PDA , AND DID ODIN SHOWED SUCCESS after finishing installation of root kernel ?
if you getting boot loop just go to recovery ,clear/delete cache and reboot 99 out of 100 times it solves bootloop.
Click to expand...
Click to collapse
yes, success...
i did the instalation with odin and still with boot loop, and the sad part is, i can't get into recovery...

knurd said:
yes, success...
i did the instalation with odin and still with boot loop, and the sad part is, i can't get into recovery...
Click to expand...
Click to collapse
oh man , flash the stock ROM in download mode , and post steps by step how u tried to flash root.kernel,
i think some more experienced person would be able to help you i am too semi-noob here ! I have no idea why i didn`t worked.
to root you can try this method .
YOU CAN TRY ROOTING BY APP ROOTGENIUS
good luck :good:

How to root Lenovo k3 note?

Hello,
Sorry if this question is asked before, I did search actually in the forum, but couldn't find anything clear.
I got a lenovo k3 note, but it has some annoying apps installed which may be infected.
Apps such:
I love wallpaper
Caller ID
Twitter
MaxxAudio
Clean Master
DU battery saver
Browser (it seems there are two installed)
probably more....
All these apps are installed in the system so they can not be uninstalled directly. so rooting is a must in this case I guess (i'm newbie in these things)
So the main question is how can this phone be rooted?
Thanks in advance.

Lenovo K3 Note
I am also facing same problem. Any help?

It is wired that I can not disable any pre-installed app. Is this an issue in Android 5.0? Can someone please help?

It is easy to root this wonderful smartphone :
1/ Go here and download the CWM recovery v6.0.5.1 : http://pan.baidu.com/s/1mguuByg
2/ Flash it with SPFlashTool. Important : you must to check the option "DA DL All with Checksum" otherwise it will not boot!
3/ root : reboot to CWM recovery and install the supersu update zip : https://download.chainfire.eu/696/SuperSU/
4/ Gapps: reboot to CWM recovery and install google gapps 5.0 minimal : http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
Here where you can find the last official roms : http://www.vibeui.com/vibeui/rom?key=k3 note
After flashing an official rom, you have to redo all those steps.

I don't think the phone will be rooted in that way. I did red that before. I do have access to CWM, in Chinese language unfortunately, but the phone is not rooted.

I root it this way many times
The recovery I give you is in English and china, you must choose your language at the beginning.

-EM- said:
I don't think the phone will be rooted in that way. I did red that before. I do have access to CWM, in Chinese language unfortunately, but the phone is not rooted.
Click to expand...
Click to collapse
Hi,
I rooted my Lenovo K3 Note just yesterday (received it on tuesday) and had the same problem (Twitter + User Experience with viruses [checked with ESET] ).
This topic helped me quite a lot, but I still had some trouble flashing the phone.
If it can help you, here is a link to what I did : chinasmartphonereview.com/lenovo-lemo-k3-note-recovery-google-service/
Since I had to tweak the process a bit, here is what I did :
Download MT6752 Flash Tool and MT6752 USB Driver (see link above)
Install USB Driver and reboot PC (just to be sure)
Unzip Flash tool and choose flash_tool.exe
Run Flash Tool, Option – Download – “DA DL All with Checksum” must be ticked on
Click Scatter-loading-Choose MT6752_Scatter (CWM recovery folder)
Tick the Recovery (if it's not already ticked)
Turn off Phone and Remove Battery, Remove SD-Card, SIM Card
Plug-in USB Cable to PC (USB Port) – Phone to PC
Press POWER for a couple of seconds
Choose Download and Click Download (Flash tool)
Reinsert Battery
If Unsuccessful (Red Bar) – repeat from step Turn off Phone and Remove Battery, Remove SD-Card, SIM Card
Once it was done, I installed SuperSU and an app to remove those troublesome viruses (for example : "Easy Uninstaller" on the play store).
Hope it helps...
Still, many thanks to dreambo

dreambo said:
It is easy to root this wonderful smartphone :
1/ Go here and download the CWM recovery v6.0.5.1 : http://pan.baidu.com/s/1mguuByg
2/ Flash it with SPFlashTool. Important : you must to check the option "DA DL All with Checksum" otherwise it will not boot!
3/ root : reboot to CWM recovery and install the supersu update zip : https://download.chainfire.eu/696/SuperSU/
4/ Gapps: reboot to CWM recovery and install google gapps 5.0 minimal : http://forum.xda-developers.com/andr...ition-t2943330
Here where you can find the last official roms : http://www.vibeui.com/vibeui/rom?key=k3 note
After flashing an official rom, you have to redo all those steps.
Click to expand...
Click to collapse
Cani i use this method to root lollipop 5.0 stock of gionne ctrl v4s

I'm gonna try this now.
Been waiting for a root option to remove the 4(!) stock browsers and the other bull**** that this phone comes with
Choose Download and Click Download (Flash tool)
Click to expand...
Click to collapse
I did the whole thing, waited for about half an hour (twice), but absolutely nothing is happening. Any tips?

XPSprobs said:
I'm gonna try this now.
Been waiting for a root option to remove the 4(!) stock browsers and the other bull**** that this phone comes with
I did the whole thing, waited for about half an hour (twice), but absolutely nothing is happening. Any tips?
Click to expand...
Click to collapse
I had to try several times in order to successfully do it.
I don't know if it changes anything but, did you activate the "USB Debugging" ? I activated it on my last try...
My main problem was linked to the drivers : my computer had a hard time using the right ones (always checking Windows Update, had to disable it).
When it worked, I just pressed the power button, released it, inserted the battery and clicked "Download" in the next 5 sec. My computer used the right drivers, everything went smoothly (CMW installed in less than 5 sec with a big green symbol that I was REALLY happy to see).
If it doesn't trigger in the first 10sec, it failed : you can unplug your USB, shutdown your phone, remove the battery and repeat the process (press the power button, release it, plug the USB cable, insert battery, press Download).
Just keep an eye on your drivers to make sure Windows is using the ones you have installed...
Hope it helps...

XPSprobs said:
I'm gonna try this now.
Been waiting for a root option to remove the 4(!) stock browsers and the other bull**** that this phone comes with
I did the whole thing, waited for about half an hour (twice), but absolutely nothing is happening. Any tips?
Click to expand...
Click to collapse
Please do the step 11 before the step 10.
Armacryss: please change this in your post.

dreambo said:
Please do the step 11 before the step 10.
Armacryss: please change this in your post.
Click to expand...
Click to collapse
Done.

Sorry for asking what has already been asked, but just to clarify (because I have followed the above steps),
Do I insert the battery after I press download, or after it's finished? Neither seems to work. I insert the battery after pressing download, and get the battery meter showing on the screen and some chinese writing. If I press the screen, the phone boots up?
Does quick/fast boot need to be turned off?
How do I tell the flash program which drivers to use?
If I'm waiting a few minutes after each try, is that long enough?
EDIT: Got it working on a different PC. Having the same issue as XPSrobs now. Can't install Superuser and root check is saying it's not rooted, however CWM is installed.
EDIT: re-read the post from dreambo on the first page:
dreambo said:
It is easy to root this wonderful smartphone :
1/ Go here and download the CWM recovery v6.0.5.1 : http://pan.baidu.com/s/1mguuByg
2/ Flash it with SPFlashTool. Important : you must to check the option "DA DL All with Checksum" otherwise it will not boot!
3/ root : reboot to CWM recovery and install the supersu update zip : https://download.chainfire.eu/696/SuperSU/
4/ Gapps: reboot to CWM recovery and install google gapps 5.0 minimal : http://forum.xda-developers.com/andr...ition-t2943330
Here where you can find the last official roms : http://www.vibeui.com/vibeui/rom?key=k3 note
After flashing an official rom, you have to redo all those steps.
Click to expand...
Click to collapse
Thanks mate!

goose25 said:
Sorry for asking what has already been asked, but just to clarify (because I have followed the above steps),
Do I insert the battery after I press download, or after it's finished? Neither seems to work. I insert the battery after pressing download, and get the battery meter showing on the screen and some chinese writing. If I press the screen, the phone boots up?
Does quick/fast boot need to be turned off?
How do I tell the flash program which drivers to use?
If I'm waiting a few minutes after each try, is that long enough?
Click to expand...
Click to collapse
It seems that you have not install the drivers (VCOM drivers, it is special drivers that works only with SPFlashTool).
The drivers is the step the more important and more difficult
The drivers enter in action only if, the phone is completely off and then we plug it to the USB port.
Some times we have to do exactly those steps :
0- install correctly the drivers, if not already done.
1- unplug the phone from USB
2- turn completely off the phone
3- extract the battery from the phone (for me and my lenovo k3 note this step is not necessary, no need also to extract SIM or SDCARD)
4- Press the download button in SPFlashTool
5- plug the phone to USB
6- place the battery in the phone.
Immediately after this last step, the phone is detected by SPFlashTool, even if it is turned off !
It must always works, if not it's a drivers issue! (there is many tutorials to install drivers for SPFlashTool)
not forget also to get the latest version off SPFlashTool, because the MT6752 is a recent SOC : see here http://mtk2000.ucoz.ru/load/soft/soft_mtk/sp_flash_tool/5-1-0-14

It does seem to have worked now, the program was doing stuff and I got a message with 'download succeeded' and a big green checkmark.
However, it still doesn't seem to be rooted, nor can I find a way to boot into recovery. I'm probably being a big blithering idiot, but I can't find any mistakes I made and I did all the described steps.
Any suggestions?

anyone try this guide? it looks much simpler
http://www.how-to-root.club/2015/04/lenovo-k3-note-7147.html
or someon try "RootGenius.exe" app ? it worked for me on coolpad f1 and on some other chinese phones.

itzikd1 said:
anyone try this guide? it looks much simpler
Click to expand...
Click to collapse
I saw this guide but it seemed a bit shady to me, so I didn't try it...

XPSprobs said:
I saw this guide but it seemed a bit shady to me, so I didn't try it...
Click to expand...
Click to collapse
I agree, it doesn't look very legit.
I'm still having no luck using the method on here. I think Dreambo is right, and that I may just have an issue with drivers, although I can't quite figure out what I'm missing.
Sent from my LG-D802T using XDA Free mobile app

well if anyone speaks russian, there is another guide here, but google trnaslate makes it messy.
http://4pda.ru/forum/index.php?showtopic=659110&st=340#entry39923948
and here is a video
https://www.youtube.com/watch?v=2eoRD20CELk

itzikd1 said:
well if anyone speaks russian, there is another guide here, but google translate makes it messy.
Click to expand...
Click to collapse
If any russians could translate that, much appreciated

root A9 A9000ZHU1BQE1 hong kong with TWRP and supersu

hello
i search whole xda and many chinese site for rooting A9 A9000ZHU1BQE1 but there is nothing. becuase this model just release in afew country and no body work on it worldwide
but i finally find a way for rooting. (after searching alot chinese!! site)
first of all cf auto root doesnt work on this firmware.dont work on it, i see some site root with cf auto root on A9000ZCUxxxxx model but not work on A9000ZHUxxxxx (ZHU is hong kong firmwire and ZCU is open china firmwire)
IMPORTANT:
you should do several work before start the rooting.dont worry its easy
1. enable usb debugging (its easy search in google)
2. enable OEM unlock (its easy too.search in google)
3. install CROM service.apk . its for unlocking bootloader. (i install this from galaxy app in phone,just like other app.then go to CROM and unlock bootloader automaticly.its samsung company app and safe.)
you need just 3 thing (i attach them to post)
1. twrp for A9000 (15mb)
2. supersu( i use 2.82 version. put supersu file in phone memory or memory card )
3. odin soft (recommended version 3.10.6)(its a soft for pc,sry i said all things that amator members dont confuse )
after doing important thing that i said above ....
HERE IS METHOD
1:
go your phone to downloading mode. (just turn off phone and then press volume down + home + power button. if you couldnt search in google.its easy
2:
A: open odin in pc with administrator. (right click on odin and click on RUN AS ADMINISTRATOR)
B: connect phone to pc ,when you connect phone odin said "added" with blue color
now click on AP in odin and select TWRP file i attach to post.dont change other option in odin.)
c: now click on start in odin.(if odin freeze and said "not responding" dont worry just wait a few minute and dont close odin!!!)
d: after odin finish its job. odin said "pass" with green color .now phone restarting automaticly)
3:
now you should go to twrp recovery.( after phone come up,again turn off phone.and go to "recovery mode" .just turn off phone and press volume up + home + power button). if the language is chinese,change it to english(easy just press right button in first screen of twrp.or search in google).now you should install supersu with twrp .for that press install on twrp and find supersu file you put in phone memory ... .after installing press reboot.(dont need wipe cache) .
4:
after phone come up android, check supersu icon must come to your phone app.if it doesnt appear ,install it from google play .and then install "root checker" app in your phone from google play, and check for root.
finish. its done. your phone root. the whole method take 1 5 minutes
if other firmwire of A9 A9000 ,for example A9000ZCUxxxxx do this method with twrp file that i attach .if its work or not plz say in post that other one know.

Hello Sir, I think I have the same Tablet, Baiduzhe A9000, with MT6797 Android 8.0. The recovery is not working, and the manufacturer is not providing the ROM file. Will this above method work for me? Please help me

I just confirmed that my device is the same MT 6582. Sir, kindly tell me how to flash or root. My device is corrupted.

Rooting made easy
Download Kingo root app, no need to use PC, it worked on my similar tablet (tab910, mediatek, mt6797)
Google kingoapp
Now I just need to find the ROMs (android versions higher than 4.4 which is compatible with my device)
P.s. if it doesn't work, try installing the PC version & follow steps from the website