This is an old problem, but the causes are so plenty it's a doozy. So here's yet ANOTHER cause of "can't click (Install)" button and its solution.
Any way, just updated to SlimKat. And no, I did NOT have official JB installed before, just official ICS, Safestrap, and had been running on CM10 ever since. But that's not the important issue.
Tried to reinstall some APKs, like Amazon store, some Xposed modules... Except none of them will let me click the INSTALL. And yes, 3rd party apps install is active, and I even turned off verify apps.
All of the previous advice I can find says look for screen filter or brightness apps or overlay buttons. I checked. Ain't got any that's active.
I was using PermissionDog to check anything that uses an overlay and uninstall them one by one, when something hit me (not literally). All of these are overlays of some sort. What overlay did I add recently? Then I looked at my screen, then slapped my forehead... hard.
I had enabled "battery bar" that comes with BatteryMix. This optional bar shows you a horizontal 2 px high bar on the very top that shows you your battery level. That is an overlay!
I turned that off, and voila, I can install APKs again. So let that be a lesson to you.
Related
Hopefully I get bonus points for not posting the typical 'Halp! I bricked my Gear!' or 'Halp! I can has no roots!' type threads. :laugh:
I've been searching and I can't seem to find what I'm looking for. I've got my Gear rooted w/Recovery & null 23 flashed. Generally that's the hard part of rooting but I've never done this on a watch before and now I'm not sure how to set it up. I have a Sony Smartwatch 2 also and really like most of the functionality of that watch but wanted something that didn't look quite so... dated. I got a Gear and the functionality was a joke in comparison so I opted to root/flash it to get it to do what I want it to do. Now that I've done that I'm not really sure where to go but I'd like it to function similar to my SW2 with a little bit more customization. For instance, when I flashed null 23 there were a LOT of options I wasn't sure if I wanted and needed. I did some searching but all I could find was mostly people having difficulty doing the processes I've already done. Nothing on post-root/flash setup.
Which launcher do I want? I have Nova & Apex and I'm not really sure which one is better and why.
Notifications? How do I set these up? On my SW2 I really like how it handled notifications for apps like Gmail, Hangouts, SMS, etc. and I'd like to replicate this on this watch too. When I go into my Gear Manager on my phone all of the apps under notifications are grayed out. I'm assuming this app no longer controls my watch or perhaps it does when the stock launcher is activated?
Is there a description somewhere that explains each of the options when you flash the ROM? I have a feeling that I installed a LOT of things I don't need but since it was my first time and I hand't yet messed with it I erred on the side of more than less so I could maybe see what it all was.
I would like a home/watch screen with a custom watch of some sort, the current weather conditions, & a few shortcuts maybe. I miss how I could double tap the power button and set that to launch an app. I used this for the Media Controller app which allowed me quick access to controlling the audio on my phone which is one of the big features I need.
I guess in all I'm just confused by what all I want/need since it's basically a Motorola Droid on my wrist w/o a cellular or WiFi radio or GPS and rather than a full featured device I just need a better smartwatch. If someone can point me in the right direction via some links or something or if a few people want to hold my hand through a few more specific questions I have while I get this figured out I would appreciate it.
Thanks for reading.
OstrichSak said:
Which launcher do I want? I have Nova & Apex and I'm not really sure which one is better and why.
Click to expand...
Click to collapse
Up to the user. I like apex these days (phone and watch), used to use nova
Notifications? How do I set these up? On my SW2 I really like how it handled notifications for apps like Gmail, Hangouts, SMS, etc. and I'd like to replicate this on this watch too. When I go into my Gear Manager on my phone all of the apps under notifications are grayed out. I'm assuming this app no longer controls my watch or perhaps it does when the stock launcher is activated?
Click to expand...
Click to collapse
That doesn't sound right. What phone/rom are you using?
Is there a description somewhere that explains each of the options when you flash the ROM? I have a feeling that I installed a LOT of things I don't need but since it was my first time and I hand't yet messed with it I erred on the side of more than less so I could maybe see what it all was.
Click to expand...
Click to collapse
Trial and error. I haven't installed it ina long time, but I'm pretty sure it was self explanatory
I would like a home/watch screen with a custom watch of some sort, the current weather conditions, & a few shortcuts maybe. I miss how I could double tap the power button and set that to launch an app. I used this for the Media Controller app which allowed me quick access to controlling the audio on my phone which is one of the big features I need.
Click to expand...
Click to collapse
Using custom launcher allows you to add any widgets you like to a home screen. Power button [annoyingly] isn't really a power button; there is details how to change this in null faq. People like gesture or pie control type apps for launcher programs
[/QUOTE]
Brendo said:
Up to the user. I like apex these days (phone and watch), used to use nova
Click to expand...
Click to collapse
Why? What would you say are the primary differences?
Brendo said:
That doesn't sound right. What phone/rom are you using?
Click to expand...
Click to collapse
SGS4. Rooted but factory ROM still.
Brendo said:
Trial and error. I haven't installed it ina long time, but I'm pretty sure it was self explanatory
Click to expand...
Click to collapse
No, they aren't. I watched a video on how to install and all of the options he had while installing were self explanitory. My install of null 23 had lots of screens of options and I only understood what about half of them did. I would like a page somewhere that explains what they all do so I can make up my mind prior to installing and know what I want & don't want.
Brendo said:
Using custom launcher allows you to add any widgets you like to a home screen. Power button [annoyingly] isn't really a power button; there is details how to change this in null faq. People like gesture or pie control type apps for launcher programs
Click to expand...
Click to collapse
I understand adding any widgets I want but I see other people's screens and their screen looks much different than anything I've seen on an Android device so I'm not sure how to go about that.
1. Can't remember. They are similar
2. Hmmm... 4.3+ rom? Latest gear manager?
3. The few I can remember; choice of launcher, gapps (google based apps - people, calendar, play services, etc), power button mod (power button turns screen on/off), stock Samsung apps
4. No matter how it looks, it's exactly the same as phone if not using touchwiz launcher. Touchwiz launcher is not really customisable. I use the stock weather clock widget on home screen, shortcuts on second screen (app drawer, media controller, notifications, camera, tasgear), zooper widget with notification counts on third screen
I'd like to know the differences because I can choose which one of the two to install during ROM flash and I'd rather not flash the one that I'm not going to use.
Yes, 4.3 and the latest version of Gear Manager. However I just noticed something quite odd... the 'Other Notifications' on/off slider was set to off this time. I know for a fact that it wasn't last time because I checked that when I checked on 'Additional notifications' and they were gray. I went back and for a few times checking and it was set to 'on' and green. After a reboot they were grayed out again but this time I noticed that little slider on the previous screen was set to off. Slid it on and now all of my additional notifications are active and I can check and uncheck them. So I've got Gmail, Hangouts & one other one checked. I should be getting notifications on the watch now?
I know what Gapps is and I found what the power button mod thingy does in another thread. Seems if you want the power button to function on the 3rd party launchers the way it does on the stock launcher you need that installed. I did see where this can create issues at times with other functionality so I will keep an eye on that to see if it's going to create any issues for me. Still not 100% clear on that but I think I chose the right option. I also installed the stock apps because there's a media player controller and a couple of others that I really like as they are.
I guess I just keep seeing people with screens that look entirely different than mine. Mine the clock is kind of cut off on the top and the bottom and I know the top is cut off because I selected to install the status bar at the top (which I would likely not do next time I flash the ROM.. kinda pointless) but I can't understand why the bottom part is cut off. I disabled the little dots that show which home page you're on and it still gets cut off by the dock. Not really sure what I'm doing wrong.
So how will this work for notifications and phone controls? Like I know with my SW2 I could enable/disable WiFi, BT as well as a few other options and even mute, silence and normal my ring tone. Can I do this somehow from this watch with these launchers? What about notifications? I've enabled those as I stated earlier while I was typing this and still haven't got a single notification on the watch. Do I have to install the full Gmail & Hangouts APK to get the notifications and if this is the case I'm not sure it's going to behave the way I'm looking for. I really just want basic popups with the sender and the message the way my SW2 does and I'm not sure that a miniature Android device is going to be able to do this. Edit: while I was typing this I just got a notification for Hangouts & it was a full screen pop-up with the sender and the message for a few seconds so maybe this will do what I need it to do. Nothing for Gmail yet though.
Also, since I know I want the status bar across the top gone I will likely boot into recovery & flash the ROM again with that feature disabled. When I do that I will take the time to list each option that I see as well as if I know what it is or not and maybe someone can answer the questions I have about it and then I can go through with the flash with the options I want and don't want correctly set.
You'll really have to have a play yourself. I'd suggest downloading both to your phone and checking them out on an easier to use (ie bigger) screen
Yeah, sometimes it can turn off like that. I'd suggest clearing gear manager data/cache, uninstalling gm, reboot, install gm. If it's ticked, you should get notifications (when screen is off)
Correct. It's either one or the other
You'll need to play with settings to get that correct. Widget padding I believe
I think you may need to reset watch as well as reinstall gearmanager just to get rid of the gremlins it sounds like you have. The watch hardly controls anything on the phone (only what you see in gm). For bidirectional stuff, give tasker a try and check apps in themes and apps section
Yep, just reflash if you want to change any settings
Hi,
I'm using CM10.2.1 on my ovation device and have noticed a significant slowdown/lag when rearranging (moving) app-icons on the home screen.
It depends on the number of icons that are displayed on the current page - when there are many icons, the slowdown is horrible.
My grid size is 8 rows x 5 columns.
If I check "Hide icon labels (Hide homescreen icon labels)" (Personalization->Home Screen->General), rearranging app-icons is very smooth with no slowdowns. So it has something to do with the label rendering?
What can I do to avoid the slowdowns without having to learn the app-icons by heart.
Have you tried enabling force gpu acceleration in developers options?
jpisini said:
Have you tried enabling force gpu acceleration in developers options?
Click to expand...
Click to collapse
Yes, I tried that already. It makes no difference. If I enable "Show GPU overdraw", the icon labels are marked light red to red - no matter wether "force gpu rendering" is checked or not.
I also tried "Disable HW overlays" - this has no effect.
How many icons are needed for this to appear? I can add that many and see if I see the same thing.
Sent from my SPH-L900 using XDA Free mobile app
With 6 Icons on one page, the difference is quite obvious.
If you add more icons, it will get worse. If you fill a 5 x 8 screen with icons, it's a real pain.
Strange my home screen has 20 things move around like butter
Sent from my SPH-L900 using XDA Free mobile app
What can I do to solve this problem?
CHV said:
What can I do to solve this problem?
Click to expand...
Click to collapse
You'll probably find that its one (or more) app that's not playing nicely. I'd start by removing them one at a time until it reveals itself.
Just did a full wipe and clean install. Skipped everything possible - no wifi configured, no Google account, no restore from Google.
Then dragged some icons on home screen. Moving them around is now much better, but not as perfect as with icon labels switched off!
After that, I verified the grid size in the Trebuchet preferences - changed nothing, returned to home screen. Now some of the icons are not visible any more and some of them are outside the screen area.
I've got no idea what's going on here... Trebuchet perhaps is mixing up colums and lines sizes of the homescreen grid?
All I can think of to suggest at this point is:
Make certain your chosen CWM10.2 downloaed properly (or do it again).
Make certain you have the correct GApps package.
Make certain you installedd them with the correct version of CWM.
I'm assuming you followed the Guide for Dummies. It's pretty idiot resistant. After I create the bootable SD, I like to install just the EMMC version of CWM followed by the ROM. Then let the Nook boot all the way through. Go into settings and enable boot options, reboot into recovery and then install GApps. Reboot again, connect to WiFi and let everything update.
If that doesn't work, I'd suggest starting over from a fresh install of the stock ROM.
Went back to stock ROM without problems.
Reset to factory defaults.
Downloaded cm-10.2.1-ovation.zip again. No file differences found. Flashed it via CWM v6.0.2.8 for HD+ (Stock)
Flashed gapps-jb-20130813-signed.zip.
The problem is still present.
CHV said:
Went back to stock ROM without problems.
Reset to factory defaults.
Downloaded cm-10.2.1-ovation.zip again. No file differences found. Flashed it via CWM v6.0.2.8 for HD+ (Stock)
Flashed gapps-jb-20130813-signed.zip.
The problem is still present.
Click to expand...
Click to collapse
Don't know what else to say. I just (literally) went from stock to 10.1, then to 10.2, then to 11 (which I'm on now). I would rather pack the stuff I use on one screen than flip back and forth between screens. I keep it full with widgets, shortcuts, and quick-launchers. No problems like yours.
When you say, "Reset to factory defaults." you mean you flashed it back to the stock firmware?
Yes, I did a full wipe and flashed back to stock ROM - to start over from scratch.
Then I flashed CM 10.2.1 as described... and the problem is back.
Now I'm trying CM11 (M6) which does not show this particular problem (everything moves smoothly), but it has some nasty bugs. Reading a book in "Google Books" often causes a crash and the Nook reboots. The notification bar crashes sometimes when I pull it down. Sound is strange in King.com games (Candy Crush etc.)...
FWIW - You're in good company. My most used app is Kindle (Ironic, aint it?). I get random reboots with every ROM I've tried. Some are much worse than others.
My status and notification bars spread out and leave gaps.
How can I fix this?
I'm using apps which you can see in my screenshots.
Thank you in advance
I see that you're using Xposed and some modules. Did you install any module that uses/enhances/changes functionality of a Statusbar?
Maybe it's the StatusbarVolume?
I suggest disabling them in Xposed and then after reboot verify if the problem is still there. Most likely you will find the cause.
SquiffyGrain6 said:
I see that you're using Xposed and some modules. Did you install any module that uses/enhances/changes functionality of a Statusbar?
Maybe it's the StatusbarVolume?
I suggest disabling them in Xposed and then after reboot verify if the problem is still there. Most likely you will find the cause.
Click to expand...
Click to collapse
okay I turned off a few xposed modules and a few apps. that didn't work.
I actually installed all those apps during one day. Then I remember it happening quite early on during the day.. and one of the first programs I installed was elixir. After uninstalling elixir 2 I found out this app was the problem.
I installed it again and the problem reappeared after I tried to set a 'status bar'
Anyway, what Elixir 2 actually does is leave a completely transparent icon in the notification bar. I removed this with 'notifyclean'.
I'm definitely not a technoob, just a 1 week old root noob. Thanks for heading me in the right direction. Giving you a 'thanks'
Addition Info:
In fact, Elixir decided to stop working after using notifyclean. Elixir is okay but seems like I'm gonna just have to get rid of if since I really like notifyclean.
No problem, glad you sorted that all out
When installing Xposed on the OnePlus One, the double tap status bar to sleep the screen feature is completely broken. Uninstalling the framework does not fix it.
Hope you can fix this issue in a future version.
donalgodon said:
Uninstalling the framework does not fix it.
Click to expand...
Click to collapse
Uninstalling the framework reverts all the changes Xposed made. If the problem still occurs after rebooting, then the framework didn't cause it.
GermainZ said:
Uninstalling the framework reverts all the changes Xposed made. If the problem still occurs after rebooting, then the framework didn't cause it.
Click to expand...
Click to collapse
I thought that was true also, but yesterday, I did three clean, full-wipe flashes, and the only A/B changes I made was to install and uninstall the Xposed Framework.
Before installation, tapping the status bar sleeps the screen.
After installation and/or removal, it does not.
Any idea why?
Xposed problems
donalgodon said:
I thought that was true also, but yesterday, I did three clean, full-wipe flashes, and the only A/B changes I made was to install and uninstall the Xposed Framework.
Before installation, tapping the status bar sleeps the screen.
After installation and/or removal, it does not.
Any idea why?
Click to expand...
Click to collapse
And the answer is? Anybody? This is a OnePlus One COS 12.1?
bmaz121 said:
And the answer is? Anybody? This is a OnePlus One COS 12.1?
Click to expand...
Click to collapse
Works fine for me - same COS 12.1 - only have two modules though - so maybe disable all modules first and then retry.
TBH - I've never used that function - until you mentioned it - as I use the power button to lock.
That does not answer the question. It is not about it working to lock but what it does when it locks. The Notification screen should not be displaying when Unlock. On the first tap of the double tap the Notification screen or Status screen drops down before it goes to sleep. That should only happen when I swipe down not tap once. Why don't people read the post before they answer it?
You've got confused mate! There's no mention of 'what it does when it locks' as you say. The thread is about the double tap on status bar not working after installing xposed.
No worries - it can be a little confusing doing all that reading.
I just got this phone a couple of days ago. So far, I've got TWRP, Chroma (12 Apr version since any of the later updates don't work for me), and SuperSU up and running. I've also got Nova Launcher and Greenify as well. Once in a while, I'll get a pop up that says "[APP NAME] has been granted superuser permissions for an interactive shell". It's usually Nova Launcher or Greenify that does this, and right after that, I'll notice that my notification drawer won't come down anymore. Technically, I can force the drawer to come down by changing the gesture in Nova Launcher (both this and Greenify still work fine), but it's basically the entire top part of the screen that becomes nonfunctional. I can't click anything that happens to be there, be it the Google search bar or the menu buttons within any given app. When I turn it horizontal, the nonfunctional part of the screen turns with it as well.
I'm not sure what the problem is, but it does go away after I reboot my phone. Half the times it will work, half the times it won't.
NickLee808 said:
I just got this phone a couple of days ago. So far, I've got TWRP, Chroma (12 Apr version since any of the later updates don't work for me), and SuperSU up and running. I've also got Nova Launcher and Greenify as well. Once in a while, I'll get a pop up that says "[APP NAME] has been granted superuser permissions for an interactive shell". It's usually Nova Launcher or Greenify that does this, and right after that, I'll notice that my notification drawer won't come down anymore. Technically, I can force the drawer to come down by changing the gesture in Nova Launcher (both this and Greenify still work fine), but it's basically the entire top part of the screen that becomes nonfunctional. I can't click anything that happens to be there, be it the Google search bar or the menu buttons within any given app. When I turn it horizontal, the nonfunctional part of the screen turns with it as well.
I'm not sure what the problem is, but it does go away after I reboot my phone. Half the times it will work, half the times it won't.
Click to expand...
Click to collapse
I would venture a guess and say this could be an issue with Nova. I don't recall Nova needing superuser privileges though from when I used it on my rooted G3, but that, perhaps, has changed. I would restore a backup, if you have one, or try a different launcher and see if the problem persists before going further. Start with the simple fixes first. :good: