I tried to flash my P880 but something went wrong and after it phone is not working anymore. SW update mode is not working, only when I connect it to PC it's detected as APX, is there any way to unbrick this phone? Is there any working APX drivers for P880? I was looking for those drivers for couple of hours without any resuts, always when I found it didn't work (when I tried manual install drivers from selected foder), always failed. Thanks for any advices.
wojtekson16 said:
I tried to flash my P880 but something went wrong and after it phone is not working anymore. SW update mode is not working, only when I connect it to PC it's detected as APX, is there any way to unbrick this phone? Is there any working APX drivers for P880? I was looking for those drivers for couple of hours without any resuts, always when I found it didn't work (when I tried manual install drivers from selected foder), always failed. Thanks for any advices.
Click to expand...
Click to collapse
My first attempts ended badly also, hopefully this thread will help get you into S/W update mode. http://forum.xda-developers.com/showthread.php?p=39951993
Btw, APX mode is a no go on this device.
not working even if i put the batter, any other solutions ?
only thing that will surely work is lg center. i've been on the forum for a while now and i dont recall anyone fixing the device going into apx mode by themselves, but i think i've seen someone who had it repaired by lg. we simply don't have the program they use for fixing it available
wojtekson16 said:
not working even if i put the batter, any other solutions ?
Click to expand...
Click to collapse
Well you need to better describe you situation, e.g what you were flashing, recovery, android version (custom rom/ kernel).
---------- Post added at 01:01 PM ---------- Previous post was at 12:59 PM ----------
Flying_Bear said:
only thing that will surely work is lg center. i've been on the forum for a while now and i dont recall anyone fixing the device going into apx mode by themselves, but i think i've seen someone who had it repaired by lg. we simply don't have the program they use for fixing it available
Click to expand...
Click to collapse
Yeah if we had nvflash access via APX mode, we could recover against any software brick, LG choose to leave this out of their bootloader which is a shame.
I tried to flash the official stock rom "V20B_00" by lg using the kdz updater, but I didnt put off battery during update software, I just hold vol down button and connected to the PC. Then started to update, i was waitting for a long time, but it didnt update, so i disconnected the phone, and now it's not turning on.
Do you think that I am able to unbrick this phone?
wojtekson16 said:
I tried to flash the official stock rom "V20B_00" by lg using the kdz updater, but I didnt put off battery during update software, I just hold vol down button and connected to the PC. Then started to update, i was waitting for a long time, but it didnt update, so i disconnected the phone, and now it's not turning on.
Do you think that I am able to unbrick this phone?
Click to expand...
Click to collapse
Im unfamiliar with how the Lg S/W update mode actually works, i would assume that its separate to the main bootloader(which by disconnecting you maybe/ most likely corrupted) but either way, you HAVE to get into the update mode to repair. Hopefully you can find a way in (search the forum), but if not its most likely a brick im sad to say
btw, is it possible to repair it via JTAG? or just one solution for it is lg service center?
I'm in a unconfortable situation, because my task was to put the europe language pack to this phone, and now its not working. The phone probably wasnt bought in country so it might be some problems with lg service center
wojtekson16 said:
I'm in a unconfortable situation, because my task was to put the europe language pack to this phone, and now its not working. The phone probably was bought in my country so it might be some problems with lg service center
Click to expand...
Click to collapse
I cant say for sure, but JTAG is very unlikely. LG will fix the phone, the question is for how much. Normally if the bootloader is gone it will require even LG replacing the motherboard. I cant comment on how much this may cost.
I'll cut it short as i've already encountered this situation
If you can't exit apx mode normally
(meaning you voluntarily entered apx mode by holding vol + & - at the same time)
you are experiencing a hard brick
Only case we could solve it is if we had apx drivers, but as you've already searched..there aren't any
If you want phone back, in my experience, only solution is service center
I know it sucks, but sometimes it happens
One thing you could do is search the web for someone who's ditching his O4X for a really low price (because of a shattered screen or other malfunction) and replace the motherboard yourself. If you're in luck that can be cheaper than a service center and then you don't have to worry about blown bootloader fuses.
Sent from my LG-P880 using xda app-developers app
so the repair by lg service center wont be for free? its official progeam from lg fault that I got bricked phone not mine, it shouldnt be for free?
wojtekson16 said:
so the repair by lg service center wont be for free? its official progeam from lg fault that I got bricked phone not mine, it shouldnt be for free?
Click to expand...
Click to collapse
You said yourself that the phone wasn't bought from your country.Even if you get over that problem they'll still replace the motherboard.I doubt you could even prove that it was their software's fault.If you can do it, like stated above, buy a cheap 4x hd from the internet and replace the motherboard.Well it's not worth the effort in my opinion.
I think you should try your luck with the service center and buy another phone if you can't get it repaired for a low price or free.
Related
Hello,
Few days ago I bought my girlfriend an X8.
Since I have too an X8 with all the root and such things done I though it might be a good idea to do that on girlfriend phone.
BUT, second day after buying that phone, and trying to get exact modifications I did on my X8 , her phone got hard bricked and I couldn't boot it up, not even to recovery mode since computer usb didn't recognize it anymore...
I think i was in phase while trying to get root access..
So, I went to the shop to get my replacement phone wich they did gave me...
Soon after I got home, I was trying again to make same modifications, and it was sucesfull... I installed custom rom, with root access and that was it...
BUT here comes the problem - while trying to use Titanium Backup , i was constatly getting the message that my phone isn't rooted so I downloaded root checker from market and yes, it said that i'm not rooted... Funny thing, busybox and superuser worked just fine...Then i though it might be a problem cause I didn't update superuser on latest version, so I did it, and now the superuser told me i'm not rooted...
To make long story short, i came up to flash stock rom, and then back to custom rom to make clean install again, this time I wanted to unlock bootloader too to put a custom kernel for that rom, but after the process, phone quickly restarted 2 times and from then it doesn't want to boot up, just like the first phone, doesn't react on power button not even to usb...
I'm so frustrated because on my X8 everything went fine, and i did on her exactly what I did on mine, but I bricked her 2 new phones and I don't know what to do next
Is there any way to back it up to life again??? (i think they won't replace my phone again at the shop)
alenal5 said:
To make long story short, i came up to flash stock rom, and then back to custom rom to make clean install again, this time I wanted to unlock bootloader too to put a custom kernel for that rom, but after the process, phone quickly restarted 2 times and from then it doesn't want to boot up, just like the first phone, doesn't react on power button not even to usb...
Click to expand...
Click to collapse
what custom room you using to unlock bootloader?
You can't even use the Repair section of the PC Companion?
what ROM do you use when you try to unlock bootloader?
I was using stock rom (Elcair) when i tried to unlock bootloader...
and none of the usb methods works cause it doesn't get recognized by PC...
Uff...to any hard brick,your phone should get flash mode with fleshtool or seus/pcc..maybe its some mistake..to root phone,easier way is with fleshtool..
Sent from my E15i using XDA App
Do you have install PC Companion?
Sent from my X8 using XDA Premium App
have you tried installing ggsetup-2.2.0.10.exe and trying on another usb slot? the file is in FlashTool_0.2.9.1 package
Yes, i've installed Gordons Gate, but phone wont go into recovery mode anymore and it doesn't flash led when I plug the charger into phone (i've left it last night on charger but no success)...Complete deadly now cause of bootloader unlock, strange...
alenal5 said:
Yes, i've installed Gordons Gate, but phone wont go into recovery mode anymore and it doesn't flash led when I plug the charger into phone (i've left it last night on charger but no success)...Complete deadly now cause of bootloader unlock, strange...
Click to expand...
Click to collapse
this is strange.. not reacting on usb..
when u turn off the phone then plug usb cable + pressing back button i call that downloading mode.
I don't know how to help u anymore..
btw what rom u're installed when the phone restarted twice? is it overclocked?
just curious
It was stock rom -> Eclair 2.1
No overclocking modules were installed...
I've came upon some similar thread on the internet, the guy had same problem, and someone suggested him that the only way to restore the device is to put it on RIFF JTAG box
Links are here:
jtagbox.com/jtag-news/riff-jtag-sony-ericsson-xperia-x8a-se-shakira-unbrick-boot-repair-supported/
youtube.com/watch?v=ujH_IpsskLg
....
So, my question for now is - Can I buy JTAG box from ebay, and soldered PCB for X8 from here ( multi-com.pl/index.php?itlskel_lang=en_US&itlskel_pgid=details&id_pr=8466 )...
Will that work it out ? Question goes to JTAG users hopefully.
Please modify URL's since I can't put full URL's yet
you just bought the phone rite? send it to service.
no need to buy anything to do it yourself. That riff box costs around $150 and there are people in various cities who might be able to repair your phone (check website of riff box) with fees but try with SE service centre first. You might get it done for free.
If you have followed the steps it really should not end up like that. It is really discouraging to read posts like yours. It makes me ponder twice whether I should go and try the unblock my bootloader myself.
vientito said:
you just bought the phone rite? send it to service.
no need to buy anything to do it yourself. That riff box costs around $150 and there are people in various cities who might be able to repair your phone (check website of riff box) with fees but try with SE service centre first. You might get it done for free.
If you have followed the steps it really should not end up like that. It is really discouraging to read posts like yours. It makes me ponder twice whether I should go and try the unblock my bootloader myself.
Click to expand...
Click to collapse
I think SE center won't cost $150 (and if cost that much rather than buying those tools or pay SE i will buy another x8 it cost cheaper than that).
I agree with you, send it back to SE center and tell them u're upgrading phone software but the the power or internet down in the middle of process and your phone dead.
No, the thing is, i've already told them I was upgrading my software and phone crashed when I swaped my first phone, so if I send them back another phone in that short time I'll become suspect, and I highly doubt they'll accept my warranty
btw. I really don't know what could be the reason for bricking
Basebands versions were xxx015 on the both devices...
men try again with seus
just turn your pc/windows on safe mode with networking
ive experience that
then
do this like i said in other thread
try it again with this steps
open pc companion (dont plug your phone)
choose support zone click start
select phone software update
click start
then CLICK REPAIR PHONE
and that its you know the next step
you will see initializing AND downloading the phone software
Will try it tonight but I higly doubt since phone doesn't react with LED anyhow
Thank you for your tip anyway
xpraken said:
men try again with seus
just turn your pc/windows on safe mode with networking
ive experience that
then
do this like i said in other thread
try it again with this steps
open pc companion (dont plug your phone)
choose support zone click start
select phone software update
click start
then CLICK REPAIR PHONE
and that its you know the next step
you will see initializing AND downloading the phone software
Click to expand...
Click to collapse
No led respone when usb connected and press back button...impossible you can run pc companion or seus..
alenal5 said:
No, the thing is, i've already told them I was upgrading my software and phone crashed when I swaped my first phone, so if I send them back another phone in that short time I'll become suspect, and I highly doubt they'll accept my warranty
btw. I really don't know what could be the reason for bricking
Basebands versions were xxx015 on the both devices...
Click to expand...
Click to collapse
There's nothing wrong trying right?
Besides if they're not accepting your warranty you will pay anyway...
And if SE center tell you to pay ask them how much in front before doing any reparation.
Maybe $10, $20 etc i doubt it will cost as high as new phone.
help... i am also in the same situation..my phone bricked when i was bootloading , now its completely black and it cant on ...when i connect to pc , pc cant detect ..help please..i just bought my w8 about 3weeks only ..my dad's present ...hlp please
I rooted my Tab with Clock Mod and I'm still on contract I installed the wrong ROM (Stupid Mistake) I clicked reboot now nothing happens?
I do get a driver connection when I press the power button for 10 seconds on The PC (not my pc A friends) The tab is my only device to the Internet besides I'm writing this from his PC.Of course the screens blank.
Please Help, I'm on contract with a carrier paying for A not working device I'm hoping to get it working and restoring but to A stock/un rooted versrion.
Yes i was rooted and had Clock Mod when trying to install A ROM being dumb. As I said You can ear the driver sound in the computer when pressing the power for 10 secounds but no screen, I hope there is a way to reverse this and get back to my orginal boot loader.
Thanks :.(
If i can save i be staying on stock software.
Does Odin recognize the device
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I am with spudster
Odin Does not recognize the device, but when i plug it into my desktop i can her the input sound, but i look in device manager and the device will not pop up, but although when i hold the power button for 10 seconds it will start making the driver sound, it makes the driver sound like i am pulling the usb cable in than out, the driver sound stops as soon as i release the power button. i we have tried to put the device in download mode, blind folded. I have looked up on youtube and all i found was Jtag.Look This Up On Youtube ( Samsung Galaxy TAB 8.9 (LTE) - JTAG Brick Repair Servic) .But i couldnt do this bbecause the tablet is also owned by a carrier.. Please Help, Thank you
If Odin doesn't recognize the device you're in trouble. I would try to flash the stock rom with odin but I don't think it will work. But maybe you get lucky. If it's still under warranty you could try that. Just play dumb and say it stopped working and you don't know why. Otherwise jtag is your only other option.
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round
OK,The computer detects it but odin won,t I will try to get A JTag service
if theres nothing else that can fix it :.(
Try to flash using ADB !
---------- Post added at 12:05 AM ---------- Previous post was at 12:02 AM ----------
If irs detected by the pc ADB should work! Worth a try mate
..
None of these works, except for the jtag, which i havnt done yet... i need to buy a jtag and figure out how to use it??
jaydenmoore2015 said:
None of these works, except for the jtag, which i havnt done yet... i need to buy a jtag and figure out how to use it??
Click to expand...
Click to collapse
No. Google mobiletechvideos. It's a service you send your device to and they jtag it.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
.
The computer is only detecting it
Have you installed the device drivers on the PC? Odin wont recognise the tab without them.
If you can get into download mode, install drivers (or Kies) on PC and then odin should see the tab when connected.
Re
Yep, i have downloaded all the drivers for my device....
well i have let my battery go FLAT and now i am getting this device driver Qualcomm HS-USB QDLoader 9008 (COM6) So i try odin again because thinking that the COM6 at the end would be recognized and it still doesnt turn on, i have looked for jTagers around my state there is hardly any and the only one is over seas.... Is there any other ways to do it with a program
..
Only thing it is doing though reconizing An driver when we plug it in the computer.
If there is A way to reverse the firmware changes back to stock This would be A relief.
We could take it to a tech or back to samsung to repair with orginal firmware but that may not be in A few months since I will need to save the money.
The tab was fine untill I mistakly flashed the wrong Firmware (stupid me)
Thanks for the help so far.
Hey
We could try this
http://forum.xda-developers.com/showthread.php?t=1975274
re
all the drivers are installed all that it says is this this driver, Qualcomm HS-USB QDLoader 9008 (COM6) and i have just opened my device up and taken out the battery, and i put all the componants back together, The Device Is Just Doing The Same Thing
jaydenmoore2015 said:
all the drivers are installed all that it says is this this driver, Qualcomm HS-USB QDLoader 9008 (COM6) and i have just opened my device up and taken out the battery, and i put all the componants back together, The Device Is Just Doing The Same Thing
Click to expand...
Click to collapse
You're hard bricked. Jtag or warranty are your only options.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
D....
Spudster1 said:
We could try this
http://forum.xda-developers.com/showthread.php?t=1975274
Click to expand...
Click to collapse
Doesnt Work
Ok, Guess im screwed till May or when ever I can get money to send it back to samsung
And how can warranty apply? its on a contract and Ive already opened it to get to the battery (plus theres a few cracks that I will be replacing)
Thats why I was iffy about rooting in the first place should of stayed with stock..
Thanks Anyway, I will update yous when I get the money for the reparis.
Hello ! i am new to this comunity ! please i need some help ! It's about my LG P880 ....i flashed a wrong rom to this unit and now it wont turn on. The screen is black even when i plug it in the wall soket. The only thing when i plug it into my pc it shows like a APX missing driver ant that's it. What should i do ? i only heard of the JTAG repair but i am in Romania and here something like this is unheard of and the shipping costs would be around 150$ to usa without repair. PLEASE HELP ! (
Drewmk20 said:
Hello ! i am new to this comunity ! please i need some help ! It's about my LG P880 ....i flashed a wrong rom to this unit and now it wont turn on. The screen is black even when i plug it in the wall soket. The only thing when i plug it into my pc it shows like a APX missing driver ant that's it. What should i do ? i only heard of the JTAG repair but i am in Romania and here something like this is unheard of and the shipping costs would be around 150$ to usa without repair. PLEASE HELP ! (
Click to expand...
Click to collapse
relax. 1st thing to do is take a breath. 2nd thing to do is follow some guide to do it right this time. maybe it cant boot, but it can go in adb mode or in upgrade screen and restore the original forcing the original rom in. its ur choice.
---------- Post added at 09:58 PM ---------- Previous post was at 09:53 PM ----------
Drewmk20 said:
Hello ! i am new to this comunity ! please i need some help ! It's about my LG P880 ....i flashed a wrong rom to this unit and now it wont turn on. The screen is black even when i plug it in the wall soket. The only thing when i plug it into my pc it shows like a APX missing driver ant that's it. What should i do ? i only heard of the JTAG repair but i am in Romania and here something like this is unheard of and the shipping costs would be around 150$ to usa without repair. PLEASE HELP ! (
Click to expand...
Click to collapse
oke. since u tried install a custom rom , i suppose at ur pc u have the right drivers installed for adb mode, right ? if yes , then take this all in one toolkit from afro and it will save u . http://forum.xda-developers.com/showthread.php?t=2230934
if not , tell me. next post ill show u what to do for the adb bootloader.
p880
Its not working at all the screen is black it's not going into sw update or cwm or anything
Drewmk20 said:
Its not working at all the screen is black it's not going into sw update or cwm or anything
Click to expand...
Click to collapse
Try this method: http://forum.xda-developers.com/showthread.php?t=2069723. This will flash the original firmware by LG.
dead
Dexxon said:
Try this method: http://forum.xda-developers.com/showthread.php?t=2069723. This will flash the original firmware by LG.
Click to expand...
Click to collapse
The phone is like dead it dosent goes into SW MODE the screen wont turn on. Not even the lg logo nothing. I think it has to go on a original LG Service center (((
Drewmk20 said:
The phone is like dead it dosent goes into SW MODE the screen wont turn on. Not even the lg logo nothing. I think it has to go on a original LG Service center (((
Click to expand...
Click to collapse
its not bricked you get APX missing driver just install apx drivers and cher in optimus 2x forum http://www.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/ here wha to to do but you mast find the p880 rom
nikolas60 said:
its not bricked you get APX missing driver just install apx drivers and cher in optimus 2x forum http://www.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/ here wha to to do but you mast find the p880 rom
Click to expand...
Click to collapse
the link you provide is old. nobody can download drivers from there anymore, his links are dead.
maybe the nvflash utility is the same with this one here ?
and the apx drivers for 4x are those the same for 2x ?
kessaras said:
the link you provide is old. nobody can download drivers from there anymore, his links are dead.
maybe the nvflash utility is the same with this one here ?
and the apx drivers for 4x are those the same for 2x ?
Click to expand...
Click to collapse
APX device not recognized... NVFlash doesn't work on P880 (AFAIK).
And if you pay atention, the links also as uploaded drivers are from 2011, old.
Check SW
First of all try this:
1. take battery out
2. put it back
3. press and keep volume down
4. while keeping volume down plug USB cable, after 2 sec should enter to S/W upgrade
try exactly how i said and report if that works.
p880 2
CQMantis said:
First of all try this:
1. take battery out
2. put it back
3. press and keep volume down
4. while keeping volume down plug USB cable, after 2 sec should enter to S/W upgrade
try exactly how i said and report if that works.
Click to expand...
Click to collapse
Nothing. The screen is black . I only hear the plug and unplug sounds in windows 7. And APX with ! yellow sign .
Drewmk20 said:
Nothing. The screen is black . I only hear the plug and unplug sounds in windows 7. And APX with ! yellow sign .
Click to expand...
Click to collapse
Well i searched about ADB/FB/APX Drivers and someone said working at this thread http://forum.xda-developers.com/showthread.php?t=2263822
try this
http://forum.xda-developers.com/showthread.php?t=2179126
lg p880
PontiacGTX said:
try this
http://forum.xda-developers.com/showthread.php?t=2179126
Click to expand...
Click to collapse
Didnt work ...the phone is like dead . no sw mode. Thx anyway !
p880 dead
I sold the phone ! thank you for your support everybody !!! the only option left was to change the moatherboard but a sh phone here in Romania is 750 ron and a motherboard 500 ron so dosent worth the trouble !
P880
Well, before touching any device you should have patience, if you said "APX missing driver ant that's it" i don't think phone is already dead
CQMantis said:
Well, before touching any device you should have patience, if you said "APX missing driver ant that's it" i don't think phone is already dead
Click to expand...
Click to collapse
we made it to install the correct drivers. i helped him in this. there was no way. his phone really was dead. maybe he is one of those 3 people in the whole world who bought it new and the update through lg pc suite killed it. oke ... ***** happen* in this world sometimes. too bad i feel sorry for a new phone.
880
kessaras said:
we made it to install the correct drivers. i helped him in this. there was no way. his phone really was dead. maybe he is one of those 3 people in the whole world who bought it new and the update through lg pc suite killed it. oke ... ***** happen* in this world sometimes. too bad i feel sorry for a new phone.
Click to expand...
Click to collapse
Well i don't have a lot of experience of re-installing phones, but i don't think that phone died of software missing/failure on phone, should be extra drivers/soft to wake it up, even after formatting all device, or maybe when he tried flash rom phone hardware got burned. i feel sorry for that phone
Sorry for English language mistakes ^^
CQMantis said:
Well i don't have a lot of experience of re-installing phones, but i don't think that phone died of software missing/failure on phone, should be extra drivers/soft to wake it up, even after formatting all device, or maybe when he tried flash rom phone hardware got burned. i feel sorry for that phone
Sorry for English language mistakes ^^
Click to expand...
Click to collapse
nah its ok. you see , this time i believe he is right , it died. the reason is because this happened while using pc sync with the pc suite. the original lg software caused him this issue. i was not there to see what happened but for the original to fail so bad..... its one in a billion.....
So i factory rested the phone, then installed rom manager from google play and instaled CWM then pressed reboot to recovery and the phone turned off. Now when i want to turn it on it stucks on LG logo, tried all combination (i think so) but it but it shows LG logo then screen turns off. Anybody help?
Edit: I found out that i can turn my phone in SW upgrade and use Smart Flash Tool, but the problem is that none of the drivers are working, i tried about 10 of them, pc cant recognize my LG, anybody help?
Here to help!
Mattas92 said:
So i factory rested the phone, then installed rom manager from google play and instaled CWM then pressed reboot to recovery and the phone turned off. Now when i want to turn it on it stucks on LG logo, tried all combination (i think so) but it but it shows LG logo then screen turns off. Anybody help?
Edit: I found out that i can turn my phone in SW upgrade and use Smart Flash Tool, but the problem is that none of the drivers are working, i tried about 10 of them, pc cant recognize my LG, anybody help?
Click to expand...
Click to collapse
I had this problem like 5 months ago
OK read this and follow the exact guide im doing it personally so that you dont have to search! kk
(for getting your phone working)
1.install the phone drivers from the website ( it might show on the com port thingy then )
2. flash only a gingerbread rom or froyo rom because the ICS rom is locked with a bootloader and will cause the lg logo thing all over again if you flash
3.From this link download the gingerbread rom( download the V20A from venezuela )( http://lg-phone-firmware.com/index.php?id_mod=1 )then use the rom convertor ( go to this link for the guide on how to flash http://forum.xda-developers.com/showthread.php?t=2144577 )
4. if it works, all you have to do is put a rom on your sd and go on with your life
( PS I suggest you try HUEXXX's IZS ROM or Marvel V9 as they both are really stable and works really well)
as for other roms
Dont forget to click the thank button on the corner of this post
Will it work normaly if i flash venezuela rom not baltics (im from baltics)?
Mattas92 said:
Will it work normaly if i flash venezuela rom not baltics (im from baltics)?
Click to expand...
Click to collapse
It will work fine!
Im not from venezuela myself i live in the middle east ( im indian though )
So it will work fine
the guide above was from personal experience my friend!
if anything goes wrong please feel free to ask!
im doing everything what tutorial says, but my pc still cant recognize my phone and smart flash tool cant find it too. Maybe its because windows 8.1?
NOPE
Mattas92 said:
im doing everything what tutorial says, but my pc still cant recognize my phone and smart flash tool cant find it too. Maybe its because windows 8.1?
Click to expand...
Click to collapse
its not because it windows 8.1
MINE IS WINDOWS 8.1
Calm down give me a day ill find a possible solution
Thank you for your help dude
Sorry for double post, but is this possible on lg optimus black? http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
..hm
Mattas92 said:
Sorry for double post, but is this possible on lg optimus black? http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Click to expand...
Click to collapse
possible but not safe!
causes permanent brick if not done well ( i think )
your not detecting problems could be anything!
try reinstalling the drivers all over again
or try another computer!
and also the USB CABLE you are using should be lg ones
and if any lg ones dont work use your OB CABLE!!
REPLY ASAP WITH RESULTS
aaronjgeorge said:
possible but not safe!
causes permanent brick if not done well ( i think )
your not detecting problems could be anything!
try reinstalling the drivers all over again
or try another computer!
and also the USB CABLE you are using should be lg ones
and if any lg ones dont work use your OB CABLE!!
REPLY ASAP WITH RESULTS
Click to expand...
Click to collapse
Tried reinstalling drivers about 20 times;
Tried on another computer still the same;
Tried other (not LG) cable still the same
Today I was at local service center, they said that they cant fix it, so they sent my phone to a better service and they have some kind of box mobile phone fixing tool. Looking forward, that costs 10 to 15 euros. hopefully they fix it.
...
Mattas92 said:
Tried reinstalling drivers about 20 times;
Tried on another computer still the same;
Tried other (not LG) cable still the same
Today I was at local service center, they said that they cant fix it, so they sent my phone to a better service and they have some kind of box mobile phone fixing tool. Looking forward, that costs 10 to 15 euros. hopefully they fix it.
Click to expand...
Click to collapse
GOOD LUCK!
and before you do anything to your phone
read the side effects also!
cheerios
ok thanks next point is a stable rom when i get my phone fixed
dear, sorry the English, but I need a help from you.
I made the installation of IMG extracted the KDZ and did flash the recovery, however, now my machine not the sign of life, the computer does not detect the device, the device does not turn on, not of any sign of life. already tried in various corners anything to help me have some solution. I did the procedure based on the stock rom flash D405 with img extracted files. After that the only active device the display if I put to load without the battery, which displays the battery with a question mark. The device does not enter download mode, does not go into recovery, does not display anything, as if completely dead. Does anyone have aware and know any solution to the problem? Note: I've tried the LG flahs tools, it does not detect the device.
You have probably the worst case of them all. I suggest you to take your phone to warranty and see if they can replace it (because there probably isn't any way to fix it). If your warranty is void, then, I'm afraid, you will have to get a new device. I have had this issue myself, and it was solved only by replacing whole internals of the phone. Good thing that I still had my warranty, so it didn't cost anything. Good luck.
linasj said:
You have probably the worst case of them all. I suggest you to take your phone to warranty and see if they can replace it (because there probably isn't any way to fix it). If your warranty is void, then, I'm afraid, you will have to get a new device. I have had this issue myself, and it was solved only by replacing whole internals of the phone. Good thing that I still had my warranty, so it didn't cost anything. Good luck.
Click to expand...
Click to collapse
but this happened to you because of flash ROMS? How long on average it took for you to get the unit back?
wmosquini said:
but this happened to you because of flash ROMS? How long on average it took for you to get the unit back?
Click to expand...
Click to collapse
Yes. I tried to flash a ROM (which requires an unlocked bootloader), but for some reason the bootloader wasn't actually unlocked, and flashing a ROM caused the device to be bricked. This is probably what you would call a hard-brick.
In my case, replacement took a little more than a week. But this could differ from country to country.
linasj said:
Yes. I tried to flash a ROM (which requires an unlocked bootloader), but for some reason the bootloader wasn't actually unlocked, and flashing a ROM caused the device to be bricked. This is probably what you would call a hard-brick.
In my case, replacement took a little more than a week. But this could differ from country to country.
Click to expand...
Click to collapse
But in time to take the assistance, you said what about it? The unit stopped working alone?
wmosquini said:
But in time to take the assistance, you said what about it? The unit stopped working alone?
Click to expand...
Click to collapse
Exactly. Since the device cannot be turned on, I don't think they have any way of checking if it was rooted or tampered with in any way. So your best bet is to just play dumb and tell them your phone doesn't boot up. That helped me to get it fixed for free.
linasj said:
Exactly. Since the device cannot be turned on, I don't think they have any way of checking if it was rooted or tampered with in any way. So your best bet is to just play dumb and tell them your phone doesn't boot up. That helped me to get it fixed for free.
Click to expand...
Click to collapse
Legal, tomorrow I will even take the guarantee to solve as fast as possible. Really the device not the sign of life at all. I will inform you that the device was carrying at night and just when I catch him in the morning, he was like that.
Thank you for your help. : D
My first L90 didn't have a functional GPS, was brand new (1 week), problem was I rooted in the first day
Factory reset, hid superuser app, got a new l90
Gud luck
bacitoto said:
My first L90 didn't have a functional GPS, was brand new (1 week), problem was I rooted in the first day
Factory reset, hid superuser app, got a new l90
Gud luck
Click to expand...
Click to collapse
hard reset does not remove all traces of root. There is RCT checking. u can be sure that have no traces of root when RCT was reset. On kit kat we have chance to reset it without reflashing. But on 5.0 only reflash
---------- Post added at 11:17 ---------- Previous post was at 11:11 ----------
wmosquini said:
dear, sorry the English, but I need a help from you.
I made the installation of IMG extracted the KDZ and did flash the recovery, however, now my machine not the sign of life, the computer does not detect the device, the device does not turn on, not of any sign of life. already tried in various corners anything to help me have some solution. I did the procedure based on the stock rom flash D405 with img extracted files. After that the only active device the display if I put to load without the battery, which displays the battery with a question mark. The device does not enter download mode, does not go into recovery, does not display anything, as if completely dead. Does anyone have aware and know any solution to the problem? Note: I've tried the LG flahs tools, it does not detect the device.
Click to expand...
Click to collapse
Did u flash it from 5.0 or 4.4? This problem may have solve without service center. But if u have warranty, it must not worry u.
@linasj
Hello, I just want to know that while booting, did your phone show the message "Secure booting error"?
I am getting this message at the LG logo and then device just shuts off.
No, I don't think I ever got this message.
Sent from my LG-D405N using XDA Free mobile app.
pick.orion said:
@linasj
Hello, I just want to know that while booting, did your phone show the message "Secure booting error"?
I am getting this message at the LG logo and then device just shuts off.
Click to expand...
Click to collapse
In my case, the device did not care and neither carried, gave no sign of life. I sent him for assistance in less than one week they made the repair by warranty.