I flash new kernel and after my phone don´t start, don´t start cwm, work only downloading.....PLEASE HELP ME !
What kernel?
Powered by CM11
jurinecko said:
I flash new kernel and after my phone don´t start, don´t start cwm, work only downloading.....PLEASE HELP ME !
Click to expand...
Click to collapse
Flash stock firmware with Odin.
I think that you installed CM kernel, maybe that Aroma installer for CM kernels on JB. CM kernel does not work on JB or GB, JB kernel do not work on CM or GB, GB kernel do not work on CM or JB. Also do not use CM10.1/2 kernel on CM11 or any combination, use kernel on ROM version that kernel is made for.
Related
Well I've been using Froyo 2.2 v23b and I wanted to test some roms.
I installed CM 7.1 and when I wanted to go back on the Ginger-DX v17 the first time was good and I replaced the official CM 7.1 kernel for the FXP 030.
The problem is when I had to reinstall the GDX rom for some bugs and now it gets stucked on FXP logo and don't run the rom but I still have acces to the CWM menu.
I attempted to put some kernels (stock version, CM 7.1 official and the FXP 030) but no one works
Would you guys help me?
Nice way to start posting >.< I'm sorry
Full wipe after you change rom or stuck in boot loop.
You'd better go back to stock kernel, the FXP kernel is actually only for their Rom.
Because their kernels are not tested on other roms... I think.
Well I have to say thanks for your support for you.
What I have done is flash the latest SE firmware with flash tool and at the moment it's working.
Thread closed
I wanna install Kingdroid 3.0
Currently on rooted Kernel Version [email protected] #2
Can i just download the whole packaged which contained fransco's kernel v3.0 and flash it straight via CWM recovery?
Then after that install the rom?
current kernel > fransco's kernel > install ICS rom???
thienthancongtu said:
I wanna install Kingdroid 3.0
Currently on rooted Kernel Version [email protected] #2
Can i just download the whole packaged which contained fransco's kernel v3.0 and flash it straight via CWM recovery?
Then after that install the rom?
current kernel > fransco's kernel > install ICS rom???
Click to expand...
Click to collapse
What u can do is flash abyss kernel (which is GB) and then reboot recovery from advance options. Then full wipe and just then u can flash ICS rom.
I guess that Franco's kernel is safe but not sure and it is not worth the risk....
Any GB firmware or kernel is safe to wipe. Also all the roms that are built from source such as CM9 are also safe....
Hi there
glevitan said:
What u can do is flash abyss kernel (which is GB) and then reboot recovery from advance options. Then full wipe and just then u can flash ICS rom.
I guess that Franco's kernel is safe but not sure and it is not worth the risk....
Any GB firmware or kernel is safe to wipe. Also all the roms that are built from source such as CM9 are also safe....
Click to expand...
Click to collapse
Thanks for replying but im already in GB kernel aint i? is it really necessary to flash to another GB kernel? (abyss kernel)?
And after installing ICS rom v3.0 (kingdroid) >>> may i still be able to overclock the CPU???
thienthancongtu said:
Thanks for replying but im already in GB kernel aint i? is it really necessary to flash to another GB kernel? (abyss kernel)?
And after installing ICS rom v3.0 (kingdroid) >>> may i still be able to overclock the CPU???
Click to expand...
Click to collapse
Ahh if you are already in GB then, there's no need to flash another GB kernel or firmware Sorry, I am new to the Note and I am not used to the names yet.
If you are rooted already you can flash an overclocked kernel or install SetCPU or other daemon controlloer that allows you to overclock the CPU, there's no need to use a custom rom for it...
Hey guys im a newbie to captivate and its developments and i need your help..............
i came from the htc g2 where there is no needed for flashing kernels for backing up roms/restoring or for wifi issues, everything was pretty much straight forward after root , but with the captivate you need a specific kernel for somethings to work...i need to backup roms and restore it......so my question which kernel comes alreaady rooted/hack to flash with odin and support wifi,clockwork,backup with clockwork recovery and everything ?
plus after flashing the kernel can i flash a recovery via rom manager?
i want a kernel that supports must miui roms and asop roms (ex: ics, jellybean)
and flashing kernels dosent break/erase root right?
PS: does a rom come with its own kernel?
Devil3 kernel 1.4.1 work just great for my JB MIUI 2.9.7
http://forum.xda-developers.com/showthread.php?t=1847668 - this rom has both latest MIUI and latest devil3 kernel
maxunger said:
Devil3 kernel 1.4.1 work just great for my JB MIUI 2.9.7
http://forum.xda-developers.com/showthread.php?t=1847668 - this rom has both latest MIUI and latest devil3 kernel
Click to expand...
Click to collapse
do i lose root or have to root everytime i flash a new kernel
or when i flash a rom
Devil Kernel is best on JB ROMs. Corn Kernel on GB. Every ROM comes with a kernel in it. It depends on the ROM. Reading is important.
Ok...so I rooted with corn kernel and flashed xm7...but asphalt 7 is too slow...can I flash a kernel to make the game faster ex: devil kernel and keep the Tom with root
Sent from my SGH-I897 using xda premium
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
Hello everyone, i am new in the forum. I want to install the new paranoid 3.5 on my n7000 with stock JB rom (N7000XXSLZ). My question is if i can flash the hydracore kernel v7 using directly PC Odin without risk hard brick or yellow triangle. Then my idea is to flash the paranoid rom from CWM how can i proceed?
Tanks to all
Check if hydracore kernel can be flashed on JB ROMs on the thread of the kernel. If it is compatible with stock JB ROMs you can safely flash it without any risks. After that you enter the recovery and install the .zip file of PA 3.5
Varad297 said:
Check if hydracore kernel can be flashed on JB ROMs on the thread of the kernel. If it is compatible with stock JB ROMs you can safely flash it without any risks. After that you enter the recovery and install the .zip file of PA 3.5
Click to expand...
Click to collapse
Thanks for your answer! :good::laugh:
hit thanks if i helped!