Well I've been using Froyo 2.2 v23b and I wanted to test some roms.
I installed CM 7.1 and when I wanted to go back on the Ginger-DX v17 the first time was good and I replaced the official CM 7.1 kernel for the FXP 030.
The problem is when I had to reinstall the GDX rom for some bugs and now it gets stucked on FXP logo and don't run the rom but I still have acces to the CWM menu.
I attempted to put some kernels (stock version, CM 7.1 official and the FXP 030) but no one works
Would you guys help me?
Nice way to start posting >.< I'm sorry
Full wipe after you change rom or stuck in boot loop.
You'd better go back to stock kernel, the FXP kernel is actually only for their Rom.
Because their kernels are not tested on other roms... I think.
Well I have to say thanks for your support for you.
What I have done is flash the latest SE firmware with flash tool and at the moment it's working.
Thread closed
Related
Hello XDA,,
Yesterday i have succesfully rooted my LG Optimus 2X with Gingerbreak, i installed fast CM7 on it and it works. But now i have a problem, i wanna go back to the Standard rom but i didn't maked a Back Up so i can't... What to do? Help Please? I can't install ROMS btw from PC - Phone it doesnt detect my phone so it needs to be in the phone.
Q:
What is better @ CM7?
Stable Mod
Experimental Mod
Nightly Builds
Eanfe said:
Hello XDA,,
Yesterday i have succesfully rooted my LG Optimus 2X with Gingerbreak, i installed fast CM7 on it and it works. But now i have a problem, i wanna go back to the Standard rom but i didn't maked a Back Up so i can't... What to do? Help Please? I can't install ROMS btw from PC - Phone it doesnt detect my phone so it needs to be in the phone.
Q:
What is better @ CM7?
Stable Mod
Experimental Mod
Nightly Builds
Click to expand...
Click to collapse
what i would do in your case is go to the develpoment section and either flash a v20L official gingerbread update (kdz file, you will find an explanation thread how to flash it in there) or download an official froyo rom from original firmware section.
as far as i know you cant flash roms from PC, only basebands/ official updates and so. you need to flash roms through clockworkmod recovery.
concerning CM7 i use nightly builds. they are constantly updated with new stuff/ fixes etc, so its the very latest version of the rom. experimental mod is something you should not care about . and a stable build is basically a nightly that has been picked as a stable build.
cheers
xilw3r said:
what i would do in your case is go to the develpoment section and either flash a v20L official gingerbread update (kdz file, you will find an explanation thread how to flash it in there) or download an official froyo rom from original firmware section.
as far as i know you cant flash roms from PC, only basebands/ official updates and so. you need to flash roms through clockworkmod recovery.
concerning CM7 i use nightly builds. they are constantly updated with new stuff/ fixes etc, so its the very latest version of the rom. experimental mod is something you should not care about . and a stable build is basically a nightly that has been picked as a stable build.
cheers
Click to expand...
Click to collapse
+1
I'm curious why you would like to go back to factory. You might want to check these out:
Thanatos: http://forum.xda-developers.com/showthread.php?t=1327949
Paul's: http://forum.xda-developers.com/showthread.php?t=1328656
These are very close to stock v20l + fixes + optimizations
Use smartflash.
Sent from my LG-P990 using XDA App
Use smartflash.
Click to expand...
Click to collapse
don't use smartflash, it will format you entire data (sdcard internal). better use KDZ since it won't erase you data only system
Hello everyone,
I want to know how to update CM7 to latest nightlies without waiting devs to make an update to the ROM.
Im using GingerDX.
Is it just flashing the cm7 zip in CWM? Which file to download from official CM7 site.
Any idea is welcome.
http://cm-nightlies.appspot.com/?device=shakira
Install only rom, not kernel.
Use one of FXP028 FXP030 or stable CM71 kernel.
Means i download the nightly zip and flash in cwm, thats all?
Why need to flash kernal?
nAa's kernel seemed to be working fine also with CM nightly
i would like to know how too...
Can u explain? I dont want any kernal, i just want CM7 nightlies. Im using stock kernal.
rav3n_pl said:
http://cm-nightlies.appspot.com/?device=shakira
Install only rom, not kernel.
Use one of FXP028 FXP030 or stable CM71 kernel.
Click to expand...
Click to collapse
Only those kernals work? Im using stock kernal.
How to install the rom? flash using cwm?
Custom kernels works only with unlock bootloader.
CM7 rom doesn't work on stock kernel. Only on custom kernel.
If your bootloader is unlock, the best kernel for CM7 right now is either nAa's kernel or fxp028/030 as mentioned previously.
But cam is vga only and fm radio doesn't work yet on CM rom.
If you still want to try CM rom, flash kernel i mentioned and install CM update zip in CWM.
Sent from my X8 using xda premium
Im using stock kernal and im using CM7 rom. In other words, i want to update cm7 like the developer.
doixanh said:
Release history
November 02 v019. Small fix.
CM Nightlies Hero 231+
Completely remove recent apps on status bar
Small gps tweak (for my personal use in France). It should have faster gps lock.
Click to expand...
Click to collapse
Does this means i have to use cm7 hero nightlies instead of shakira?
Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....
maharoof said:
Hi friends,
1.I have an Xperia X8.I have recently unlocked the bootloader and rooted the phone.I wanted to install CM 7.1(shakira).So,I downloaded the ROM from the official cyanogenmod website.I read in one of the post that it works only with the kernel FXP30.After searching for a long time(because most of the links are dead) ,i finally found one.I flashed the kernel by using the flashtool provided by androxyde.Through the recovery mode,i flashed the cm7.1.It said flashing was successful.But after rebooting,it shows only "free xperia project" and nothing else happens...I tried cleaning the dalvik cahe,wiped the partition,did a factory reset.But no use...Is there any way to get it working? or am i doing anything wrong?
2.is MINI JB 4.2 better than CM 7.1?since i failed installing CM,i have flashed mini jb 4.2...but i want to install CM7.1 so badly...
Thanks in advance ....
Click to expand...
Click to collapse
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.
TheScriptKitty said:
1. FXP30 Kernel??? LOL never heard of that one before.
Any way since I have never heard of that kernel before it probably is pretty old and unsupported. Try using this ROM: http://forum.xda-developers.com/showthread.php?t=1362585 with this kernel: http://forum.xda-developers.com/showthread.php?t=1350484 .
2. Do you mean JB Mini Project ROM? Because that ROM is Android 4.1.2 and not 4.2. Witch one is better depends on what you want. JB Mini Project has a lot more features and a lot more apps are compatible with it since it is a JB ROM, and any CM7 based ROM would be faster but there would be less apps compatible with it.
Click to expand...
Click to collapse
Thanks for replying ....I'll try that ASAP....
I flash new kernel and after my phone don´t start, don´t start cwm, work only downloading.....PLEASE HELP ME !
What kernel?
Powered by CM11
jurinecko said:
I flash new kernel and after my phone don´t start, don´t start cwm, work only downloading.....PLEASE HELP ME !
Click to expand...
Click to collapse
Flash stock firmware with Odin.
I think that you installed CM kernel, maybe that Aroma installer for CM kernels on JB. CM kernel does not work on JB or GB, JB kernel do not work on CM or GB, GB kernel do not work on CM or JB. Also do not use CM10.1/2 kernel on CM11 or any combination, use kernel on ROM version that kernel is made for.
i am currently using CM 11 on my Galaxy Note. but i have quite a heavy requirement for the camera in the phone and the camera that comes with CM is not that good. everything else is amazing. i found this Arya Rom based on TW and 4.1.2 JB and i can use the stock camera app i guess which was great when i used to have the stock rom. now the question is that thisnrom requires first reverting back to stock. i installed custom rom quite some months ago. so i dont rememeber any info abt the stock rom.i first used Asylum and the omni and then CM. so if i download the stock firmware now how would i know which one to download for my phone. i dnt remember that DDLSC or DDLS6 thing. Or does that code matters only while downloading Philz Recovery. And lastly can i flash Arya directly through my current recovery CWM 6.0.4.7. Please help
sas2013 said:
i am currently using CM 11 on my Galaxy Note. but i have quite a heavy requirement for the camera in the phone and the camera that comes with CM is not that good. everything else is amazing. i found this Arya Rom based on TW and 4.1.2 JB and i can use the stock camera app i guess which was great when i used to have the stock rom. now the question is that thisnrom requires first reverting back to stock. i installed custom rom quite some months ago. so i dont rememeber any info abt the stock rom.i first used Asylum and the omni and then CM. so if i download the stock firmware now how would i know which one to download for my phone. i dnt remember that DDLSC or DDLS6 thing. Or does that code matters only while downloading Philz Recovery. And lastly can i flash Arya directly through my current recovery CWM 6.0.4.7. Please help
Click to expand...
Click to collapse
to flash arya, first with cwm 6.0.4.7 flash this kernel : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed and reboot back to recovery (not to system) and flash arya rom, that's all.
albatron34 said:
to flash arya, first with cwm 6.0.4.7 flash this kernel : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed and reboot back to recovery (not to system) and flash arya rom, that's all.
Click to expand...
Click to collapse
Well. Thats simple. Now i got the way to do it.Thanx a lot bro. :good: