Database Develop

[Q] Which rom to choose now i am on Philz Safe Kernal ?

O K so i have just flashed Philz Safe Rom XXLRK-XEU from http://forum.xda-developers.com/showthread.php?t=1901191 to my note and everything seems as it should but i am a little confused as to what roms i can apply. Firstly apologies if this is in the wrong place my head is a bit all over the place after reading a lot this morning deciding if it is safe to start rooting/flashing my note, my only previous experience of this was through odin for my sgs2 so i am new to the note scene.
Ideally i would love to put paranoid android on from http://forum.xda-developers.com/showthread.php?t=1662802 but i am cautious that the install logs states not to install this rom from a stock kernal which is pretty much was philz kernal is isnt it ???
if anyone can help a newbie to the note scene out i would be greatly appreciated as i am getting confused going through all the searches i have done this morning
Hope you can helpo - cheers
KV3

when you flashed Philz Safe Rom XXLRK-XEU.. your note is already rooted now.
This kernel is safe and you can flash the PA rom with no issues. Just follow the procedure in the PA thread.

nokiamodeln91 said:
when you flashed Philz Safe Rom XXLRK-XEU.. your note is already rooted now.
This kernel is safe and you can flash the PA rom with no issues. Just follow the procedure in the PA thread.
Click to expand...
Click to collapse
Thank you - i will check it out and report back
Is this the case with all roms or just the PA rom, am i to presume that the "safe" kernal is just that and i can go and try out a few roms just as i did with my sgs2 ?
Thanks
KV3

Yes.. but when you flash a new rom, the kernel will change to whats included in the rom. In between if you choose to flash stock ICS again, need to take caution to move to safe kernel again

thanks again for the quick responses - is it best practise to always reflash a safe kernal after the rom has been installed, so in the case of me flashing PA rom i can then reflash Philz safe kernal - i am sure i will get to grips with it all there just seems to be more risks involved with the note / ICS than when i was working with my sgs2
Cheers

No. All custom roms will have a safe kernel in built. Philz won't work with custom roms as it's a stock kernel. Best is hydracore but that does not work with the JB leaks of Samsung TW

all up and running and everything seems great with the PA rom - no complaints here yet but i havent had much chance to play with things with work and all that other stuff so thanks again nokiamodeln91 i have clicked your thanks button for all your help

kill3rvill3 said:
all up and running and everything seems great with the PA rom - no complaints here yet but i havent had much chance to play with things with work and all that other stuff so thanks again nokiamodeln91 i have clicked your thanks button for all your help
Click to expand...
Click to collapse
Edit your thread title and add [SOLVED] or [RESOLVED] so people don't read about the issue that is fixed.
http://forum.xda-developers.com/showpost.php?p=32005429&postcount=1

[Q] Help with my Galaxy Note

Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?

You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)

And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...

sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well

Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app

shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate

GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....

It's already replied in the noob friendly thread

I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom

Samsung I9000 New rom?

Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)

At first you have to flash a Custom Recovery Mode. For example CWM or TWRP.
Then you can flash your Custom Rom.
Just use Google an you will find an instructions.

For the best experience you can flash it to the latest stock ROM via ODIN, install CF-Root (contains CWM too) and then upgrade to CM 10.2 with fullwipe

Just go to the forum and search cyanogenmod 10.2 from ADC team then they will provide the link to install the CWM. You can install CWM through odin (makesure u got the right odin). Follow strictly the instruction that is provided by the forum
Sent from my GT-I9001 using xda app-developers app

I think there are only Roms by the ADC-Team for the I9001 and not the I9000.
Sent from my GT-I9001 using Tapatalk 4

Here is a instruction ...step by step ...hope it can help
http://forum.xda-developers.com/showthread.php?t=2444308
DjaiGM said:
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
Click to expand...
Click to collapse

Galaxy S plus i9001-Ican't flash any custom Rom from stock Rom

I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?

Makesure you have to use correct version of cwm to install the cm. I recommend try cyanogenmod 10.1 JB 4.2.x . GO to the cyanogen official rom post (under ADC team).
FOllow all the instruction that stated inside the topic.
Any mismatch of the version of installation can fail to install rom.
Example:
http://forum.xda-developers.com/showthread.php?p=42346733
Sent from my GT-I9001 using xda app-developers app

iulian vu said:
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Click to expand...
Click to collapse
You have i9001
The rom you try to flash is for i9000

mihaitosca said:
You have i9001
The rom you try to flash is for i9000
Click to expand...
Click to collapse
Exactly.
Looks like your installation is failing because the file is for an I9000B. If you want to use CM10.1 on an I9001, you'll need to go here.

[Q] How do i know

i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!

rajk53 said:
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
Click to expand...
Click to collapse
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.

nokiamodeln91 said:
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
Click to expand...
Click to collapse
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .

rajk53 said:
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
Click to expand...
Click to collapse
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.

nokiamodeln91 said:
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
Click to expand...
Click to collapse
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !

rajk53 said:
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
And I can add an old baby bottle for free...

ThaiDai said:
And I can add an old baby bottle for free...
Click to expand...
Click to collapse
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
I am in a confused state as i can see there are a huge amount of ROMs available many are nightly made, which say them to be not in a stable state.
Found the SlimKat in the forum ,downloading the ROM SlimSaber-n7000-4.4.2-20140531.zip 139mb
Installation instructions..
Download the latest build from [here]
Gapps ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the gapps you want, reboot
Maybe a silly question but ,Do i need to download the gapps files & why ??

rajk53 said:
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
Click to expand...
Click to collapse
Please kindly start to grow up and read and learn yourself. Do not expect spoon-feeding from other members.
This is a development forum. It is not expected that you are a developer but it would be a sign of respect to read their threads and follow their instructions - they spent a lot of their time writing them. And if you not understand then try to use the search.
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
Not one of these questions show anything of this:
the first is part of the installation instructions.
the second can be found with the search (and was answered thousands of times)
the third is simply against XDA rules

To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
gapps

Azeazezar said:
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
Click to expand...
Click to collapse
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?

rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchthreadid=2770097

rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
https://source.android.com/