[Q] ##DIAG# mode crach! - Sprint HTC One (M7)

I have sprint HTC one and when I dial ##DIAG# it require enter MSL, when i enter it crach, after that, it crach all the time i dial ##DIAG# like in picture. And network is lost too but in a few seconds. Help me please! I use Insert Coin 8.1.3, kernel ElementalX 13.5.1, s-off. Thank!
Sorry about my poor English!

Related

[Q]What to use instead of ##PROGRAM on custom rom?

Hello all. As many of you may know, if you dial ##PROGRAM on stock Verizon Droid ROM, it opens CDMA programming menu.
The question is - what software/apk/whatever can I use instead of ##PROGRAM in case of CyanogenMod-based rom, which obiviously doesn't include programming software (dialing ##PROGRAM just dials it up instead of going to the programming menu).
I'm using my Droid3 in another country with another CDMA operator, and I rely on ##PROGRAM to set up my phone number and so on. Everything is good as long as you're on stock ROM (or stock-based).
Now I want to try hashcode's kexec rom and there's the problem - by what means I should set up my phone number? The number is erased after wipe. AFAIK cdma programming menu is not included in any CM-based rom for Droid.
Thanks in advance. Sorry for bad english and lots of letters.
*228 maybe?
*228 does not work with my operator unfortunately

Unlocking Galaxy S3 Mini Telcel Mexico.

Hi Guys,
Thanks for the help in advance. I just want to ask if anyone experience issues unlocking galaxy s3 mini gt-i1890L from telcel Mexico. When I put a different SIM and restarted thr phone. It only tells me "Network Lock". It doesn't show any fields to enter unlock codes. I factory reset in phone and kies as well as reload official samsung firmware and no luck. I tried entering codes to initiate unlocking but phone does not respond to any codes. I can only check imei and go tk service menu. Check the picture. Any help is greatly appreciated.
Sent from my SGH-I337M using xda app-developers app
amilayajr said:
Hi Guys,
Thanks for the help in advance. I just want to ask if anyone experience issues unlocking galaxy s3 mini gt-i1890L from telcel Mexico. When I put a different SIM and restarted thr phone. It only tells me "Network Lock". It doesn't show any fields to enter unlock codes. I factory reset in phone and kies as well as reload official samsung firmware and no luck. I tried entering codes to initiate unlocking but phone does not respond to any codes. I can only check imei and go tk service menu. Check the picture. Any help is greatly appreciated.
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
You said you tried entering codes to initiate unlocking (how many codes do you have) if you enter the wrong code too many times your sim will be blocked and you wont be able to use it and will have to get a code from the sim provider to unblock it.
Skatie said:
You said you tried entering codes to initiate unlocking (how many codes do you have) if you enter the wrong code too many times your sim will be blocked and you wont be able to use it and will have to get a code from the sim provider to unblock it.
Click to expand...
Click to collapse
Hi there,
What I meant when I tried to initiate the unlocking sequence, I dialed these numbers and nothing works. The phone doesn't respond to any of it. I pressed the dial icon but it just says "Not registered to network". For some reason when I insert a different SIM Card and restart the phone. It comes up to a screen saying "Network Lock" and that's it. It doesn't even allow you to enter unlock codes. All you can press is "Dismiss" Like what I showed in the picture. I don't know how to enter the unlock codes anymore since the phone will not respond to any of these service menu codes but it does respond to *#197328640#.
Method #1 Insert a Non accepted SIM card in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code
Note: Non Accepted Simcard is any simcard not from the original provider
OR
Method #2 Go to the dial screen on your phone as if you are going to make a call and press: #7465625*638*UNLOCKCODE# (8 digit unlock code)
OR
Method #3 Go to the dial screen on your phone as if you are going to make a call and press: #0111*UNLOCKCODE# (8 digit unlock code)
OR
Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625*638*# Once prompted for code, enter the 8 digit Unlock Code.
I tried these service codes as well and no luck
*#7465625# = Check the locks.
*7465625*638*Code# = Enables Network lock.
#7465625*638*Code# = Disables Network lock.
*7465625*782*Code# = Enables Subset lock.
#7465625*782*Code# = Disables Subset lock.
*7465625*77*Code# = Enables SP lock.
#7465625*77*Code# = Disables SP lock.
*7465625*27*Code# = Enables CP lock.
#7465625*27*Code# = Disables CP lock.
*7465625*746*Code# = Enables SIM lock.
#7465625*746*Code# = Disables SIM lock.
Can you start the phone with a sim from the correct network?
Skatie said:
Can you start the phone with a sim from the correct network?
Click to expand...
Click to collapse
Yes, I tried both. I have the original Telcel SIM card and other SIM cards. The phone just doesn't respond to any of the service codes to initiate unlocking. Only message I got was "Network LOCK" and a picture of a padlock and a button that says "DISMISS"
amilayajr said:
Hi Guys,
Thanks for the help in advance. I just want to ask if anyone experience issues unlocking galaxy s3 mini gt-i1890L from Telcel Mexico. When I put a different SIM and restarted thr phone. It only tells me "Network Lock". It doesn't show any fields to enter unlock codes. I factory reset in phone and kies as well as reload official samsung firmware and no luck. I tried entering codes to initiate unlocking but phone does not respond to any codes. I can only check imei and go tk service menu. Check the picture. Any help is greatly appreciated.
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
I am not entirely sure, but it is probably the same case as my Galaxy Ace a few years ago. Unfortunately, Telcel adds an additional lock layer that is embedded in the ROM, so any effort does no good. What I did to unlock it, was download another firmware from Sammobile that was compatible from another carrier. You may choose that path, or flashing a custom ROM. Obviously, this implies you must have root permissions enabled on your mobile device.
more telcel galaxy s3 minis
I have the exact same problem with the Galaxy S3 mini from Telcel. Even at professional unlocking businesses this was a problem.
Their is just no option to enter unlock codes, neither does it respond to "Method 1-4 unlock codes"
After entering *#197328640# in the keypad the options are
[1] Debug Screen
[2] Version information
[3] common
After selecting [1] debug screen, there are 8 options
[1] BASIC INFORMATION
[2] MM INFORMATION
[3] RR INFORMATION
[4] NEIGHBOR CELL
[5] GPRS INFORMATION
[6] SIM INFORMATION
[7] HANDOVER
[8] PHONE CONTROL
Phone control has 7 options
[1] DRX CONTROL
[2] FAKE SERIAL CONTROL
[3] NAS CONTROL
[4] UE STATE CONTROL
[5] SIMULATION
[6] NETWORK LOCK
[7] NETWORK CONTROL
and network lock says Not Active.
I bought a cheap $20 phone make and receive calls but if their is away to unlock this thing that would be greatly appreciated.
I would rather avoid installing customs ROMS however i can root and unroot with VROOT. So if there is some .apk that needs to be modified or something that would be a better option. If anyone can help with this issue, it would be greatly appreciated. Thanks..
---------- Post added at 02:03 AM ---------- Previous post was at 01:47 AM ----------
I also got this info at a code unlocking site.
*Note regarding Samsung Android phones:
If your phone is locked to Telcel or Claro Mexico or Claro
Worldwide, before placing your order please try inserting
a non-accepted sim card into your phone and ensure you
receive a prompt to enter the unlock code.
If you do not, you may need to either root your phone or
change to the latest North American firmware prior to
placing an order as you will not be able to enter an
unlock code until the firmware is updated.
The phone originally came with jellybean 4.1 but was updated to 4.1.2. Dont know if that has anything to do with it

[Q] HTC One M7 Sprint - Now on SimpleMobile - Network Operator Switching - need help

Hello everyone!
I have recently rooted my phone [ HTC One M7 Sprint ] and I am using it on the SimpleMobile [GSM] network. I have a problem when I drive from one town to the next my phone does not automatically select the new tower and asks for manual switching between [ SimpleMobile, and AT&T ] network operators, which I have to click on.
In any case where I lose connection it asks me to manually select a network operator.
Code:
Hardware Version: 0004
Software Version: 5.03.651.3
Model Number: HTC PN072
Android Version: 4.4.2
HTC Sense Version: 6.0
HTC SDK API Level: 6.20
PRI Version: 4.38_003
PRL Version: 00000
Kernel Version: 3.4.10-gf22c859
Baseband Version: 1.00.20.0315
Build Number: 5.03.651.3 CL337390 release-keys
I have tried this http://forum.xda-developers.com/showthread.php?t=2647305 and my phone is set to RUIM Only , but it does not seem to effect it at all.
My phone is set to: [ GSM/WCDA/LTE auto ]
Thanks in advance to anyone that will try to help me!!
"I am also having this issue have you found anything yet?
Sorry, but no I have not. I think I read somewhere about flashing some "radios" but I'm not 100% if that is even what I need to do.
Is it all on the 1900mhz band basically if ur gsm only the 1900mhz band is used so whenever you loose the 1900mhz band apparently you lose data completely....
That's the down side to only 1 gsm band the 1900mhz one.... U loose connectivity to a 1900mhz tower.. u lose cellular voice and data...
Unless u have been able to get voice and maybe not data... or something along those lines?
How did you even carrier unlock your phone??? ##3424# shows DM Command Service and I must enter my MSL which I have no idea what it is...
I have the CDMA workshop and htc usb modem driver installed.... connect to COM3 successful.... change anything says Failed to connect to phone.... It communicates the COM port successfully and fails when trying to change anything....
THANKS
I got it working via: http://forum.xda-developers.com/showthread.php?t=2647305 : the second post. The secret is to set your phone to CDMA mode when using any CDMA tool.
Also: http://forum.xda-developers.com/showthread.php?t=2255192
I used cdmaDevTerm .2.85.alpha to get my MSL code which is also referred to as an SPC code.
Are you saying that this phone on GSM will always have this issue?
My biggest issue is that when I drive from place to place it loses connection and I have to manually re-select the Simple Mobile carrier by pressing a few buttons.
Supposedly this youtube video fixes the GSM connectivity issue on the Sprint HTC ONE.....
http://www.youtube.com/watch?v=g6j5n11UMTk
I believe if the above solution works then great!!! Im sick of my current HTC First because the digitizer screen is cracked and getting corruption....
If I can get this to work I'll be super happy!!! According to the Above fix you need a full version of CMDAWorkshop to fix the issues....
GOOD LUCK AND THANKS!
Thanks for the link but my phone is already set to ruim-only. I used the free qpst software to do it, its a similar software.
I'd say try different APN's .... find all the APN's that work for your network.
Add them all to your phone and make sure they all work first.
Then when service stops or is interrupted, change your APN.
There may be an APP to do this...
I'm now working on fixing my HTC ONE .... Sprint to AT&T ....
I installed the latest HTCSync_3.1.24.5_htc.exe ... Do I then uninstall it or what just leave HTCSync installed?
When I enter the DIAG MODE ##3424#? It says enter MSL number in the DM COMMAND SERVICE.....
So I have HTCSync installed... can I just open CDMA Dev and get it ... lol
interesting stuff
So i figured i try this on my m7 and see if its true. So yes, its true.. you can get tmobile on a sprint phone. It's also true that it does suck and you loose connection often.
logs show lot of goodies but the one i see the most is
GsmSST : plmn(null) name from RIL: null
It's as if the RIL doesn't know whats the preferred plmn is when it looses connection. Guess a deeper look into how the ril keeps track of the plmn would help. Not sure if its a ro prop somewhere that would need to be modified.
so its interesting stuff.
i have a htc m7 sprint ,on viper rom,rooted...i have a problem,i bouht this phone off ebay,fully aware it had bad esn,but got lt lot cheaper thinking i could just unlock the sim,or connect to diffrent network..ive failed at fallowing all the threads so far to sim unlock the phone..i feel like giveing up..i do just want to sell the phone now..but in order to get my money back out this i need to sucssefully get it working with a diffrent carrier so i can tell who ever it works with certin carrier ..can anyone help?.i dont care what carrier or what network to get it working with,jus as long as i can post it on ebay for sale knowing it will work with soneone???

[Q] HTC DESIRE 510 CDMA - Virgin - Sprint - Is there a way to convert CDMA to GSM

Hi,
I am from India..My friend bought this phone during black friday.
Is there a way..i can convert this CDMA phone to GSM and use it.
I followed the following procedure..but it did not work..
rimweb.in/forums/topic/37305-tutorial-how-to-unlock-htc-desire-510-sprintvirginboost/
Please help me..
Try to install cricket rom and after *#*#4636#*#* set gsm
and frec
i try to install but in 4636 it says radio-off and i cant power it...but i can access to sim and sim menu
Romik80 said:
Try to install cricket rom and after *#*#4636#*#* set gsm
and frec
i try to install but in 4636 it says radio-off and i cant power it...but i can access to sim and sim menu
Click to expand...
Click to collapse
Thanks for your reply..I can see the sim menu as well..without installing cricket rom...I think there should be a way that it will work on gsm networks..I searched all the forums..I did not find any..
sam_zda said:
Hi,
I am from India..My friend bought this phone during black friday.
Is there a way..i can convert this CDMA phone to GSM and use it.
I followed the following procedure..but it did not work..
rimweb.in/forums/topic/37305-tutorial-how-to-unlock-htc-desire-510-sprintvirginboost/
Please help me..
Click to expand...
Click to collapse
So far none, many groups are working on this issue. For example, have a look at
http://forum.xda-developers.com/desire-510/help/virgin-mobile-htc-desire-510-gsm-t2965839

Urgent help regarding service mode on SM N9208

Friends i want to force my LTE to a particular band. I heard its possible by entering *#0011# and then selecting second row dor dual sim then Back from menu then Q and then 0000. But when i enter Q and then 0000 nothing happens. also i tried Q0000 and Q0. Any help is appreciated.

Categories

Resources