Hi guys, newbie here trying not to brick my s3 mini any more than it is.
It all started with the lack of mobile signal, so i changed the sim card-didn't work
After a hard reset it got worse, as i got a black popup on my screen :
PDA: I8190XXAMG4
Phone : XXXX
CSC : NONE
H/W : Not Active
EF Cal Date : NONE
SMD : 01N, PBA : 04N
CAMERA : N/A, FrontCam : N/A
TSP : 0X11
TSK : 0x19
Band : GPRS, CH : N/A
UART : N/A, USB : N/A
Also, the phone will not go in recovery mode anymore, only on download mode.
I tried flashing a stock firmware with Odin, but no change. The thing is, after the phone restarts, it loses any settings i made (like wireless password, google account, etc), so if i check USB in debugging mode, after restart it will be unchecked again, so for that reason i'm not sure if the reflashing worked.
In download mode it says:
custom binary download: no
current binary:Samsung official
system status: official
At the bottom of the page: HW REV: 0x5
As far as I understand after reading the forum for about 8 hours, i've lost the partitioning of the device.
If any of you has any idea what i could do, please advise.
there are a few threads on how to fix your problem
some more reading involved
efaustino84 said:
there are a few threads on how to fix your problem
some more reading involved
Click to expand...
Click to collapse
Can you please be more specific?
i"ve been looking through the topics and couldn't find anything.
Getting a bit desperate here...bought the phone a couple of weeks ago and i don't really afford another one
Can anyone please help me?:crying:
kstk said:
Can anyone please help me?:crying:
Click to expand...
Click to collapse
refer to the threads on loading stock ROM using ODIN
those will provide you with the information to repair the phone in it's current state
you will then be able to fix the partition
Ok. So I tried numerous times to upload the stock software but absolutely nothing happens, even if ODIN says that the upload was successful. As soon as the phone restarts, it loses any settings i had done, including USB debugging mode, so maybe this is why it doesn't work. I tried selecting a CSC, but after restart it's still:''none''.
The thing is that wireless is working, so i can connect to internet, but i cannot download and install anything (no space). I will try and download an emulator via PC and put it on a memory card.
Of course, it won't read my memory card :|
kstk said:
Of course, it won't read my memory card :|
Click to expand...
Click to collapse
post a screen shot of the options you have enabled when loading via odin
efaustino84 said:
post a screen shot of the options you have enabled when loading via odin
Click to expand...
Click to collapse
here it is
kstk said:
here it is
Click to expand...
Click to collapse
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
I even tried with a pit file and re-partition checked. No result.
Just flashed again with Odin started as admin. No change.
kstk said:
Just flashed again with Odin started as admin. No change.
Click to expand...
Click to collapse
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
JackoMJ said:
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
Click to expand...
Click to collapse
Just tried that, it didn't work. It's like i didn't do anything at all.
I just can't write anything on this thing
Anyway, thank you very much, guys. Any more ideas are welcome :
Was i supposed to have F. reset time checked as well?
JackoMJ said:
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
Click to expand...
Click to collapse
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
efaustino84 said:
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
Click to expand...
Click to collapse
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
kstk said:
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
Click to expand...
Click to collapse
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
tys0n said:
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It is booting normally, but it takes very long to boot.
kstk said:
It is booting normally, but it takes very long to boot.
Click to expand...
Click to collapse
You still got that FactoryApp popup on screen?
Are you rooted?
Can you enter recovery? If so, what recovery do you have?
Related
Guys,
Just updated to froyo 2.2 but i didn't remove the lag fix before hand...
now my galaxy S is just stuck on the S loading screen and never loads.
For some reason ive never been able to enter recovery using the volume+home+power button, the only way was through command prompt SDK
Now my obviously problem is, i can't boot the phone so can't reboot into recovery that way.
HELP!
goto samfirmware and download your original firmware with bootloader.
Flash via odin and it should boot you straight into recovery.
Or check out the post I just commented on in this same section.
Cheers,
BS...
Hi - can't see the bootloader on that site :S
they should all come with a bootloader, just download your original firmware.
download odin v1.3, beside the firmware you are downloading should be a PIT number.
Goto the bottom of the page and download that pit number.
Open Odin, and set your pit and pda.
Then set your phone to download mode,
connect, flash, and you should boot directly into recovery
I can't enter download mode. neither 3 button mode works, never has done, can't use up or down for recovery or download.
The only way i've ever been able to get into a recovery console was through ADB.exe which requires the phone to be booted lol.
hmm... lol I dont know man. you might need to return your phone :-(
StonoARGH said:
Guys,
Just updated to froyo 2.2 but i didn't remove the lag fix before hand...
now my galaxy S is just stuck on the S loading screen and never loads.
Click to expand...
Click to collapse
Reboot with the up button on the left, the right one, and the home one.
and then full factory reset, and cache clean.
then reboot and wait
Exact same problem here ... not luck through ADB or FASTBOOT. Stuck!
I have the same issue. Please help.
Same here...I cant get into recovery mode with the 3-button solution
I killed my SGS by installing the new JP6 without removing the OCLF first! I've had no three button recovery option for yonks. After much faffing, I managed to sort it.
Here comes the science bit:
Download JG5 from here. Use the ROMraid link in the Requirements section
Use Odin with the pit, PDA, MODEM and CSC files, not forgetting to tick repartition
This will get you back to 2.1, without a lagfix. Now install the newly released Froyo and enjoy.
Cheers,
BS...
It's an utter nightmare not being able to get into recovery/download. think i'm gonna have to send it off
Brownstone said:
I killed my SGS by installing the new JP6 without removing the OCLF first! I've had no three button recovery option for yonks. After much faffing, I managed to sort it.
Here comes the science bit:
Download JG5 from . Use the ROMraid link in the Requirements section
Use Odin with the pit, PDA, MODEM and CSC files, not forgetting to tick repartition
This will get you back to 2.1, without a lagfix. Now install the newly released Froyo and enjoy.
Cheers,
BS...
Click to expand...
Click to collapse
the links for JG5 aren't working. Do you have any other?
atcasanova said:
the links for JG5 aren't working. Do you have any other?
Click to expand...
Click to collapse
The links worked for me just now...
would you mind sending me the direct link? atcasanova at gmail dot com
thx in advance.
My phone was bricked 1 month ago (no download mode, stuck immediately on power on), I didn't send it back to Samsung but I used Riff JTag to repair it and now it's running perfectly.
atcasanova said:
would you mind sending me the direct link? atcasanova at gmail dot com
thx in advance.
Click to expand...
Click to collapse
Just try the ROMraid link under Requirements....
It does have a stupid captcha question but it eventually worked for me..
I can't post the link as it only seems to work when you click it from that webpage.
Jordiharrison said:
Just try the ROMraid link under Requirements....
It does have a stupid captcha question but it eventually worked for me..
I can't post the link as it only seems to work when you click it from that webpage.
Click to expand...
Click to collapse
Damn! I'm clicking that link, witch directs me to "coblitz codeen org www romraid com paul galaxys JG5.zip"
i've tried just "www romraid com paul galaxys JG5.zip" and it redirects me to modaco dot com
What do i have to do to download it?????????
Hi, i finally completed the download, had to change some DNS and routes using some proxies
So, I'm really new to android, and i've got a few questions
1) how am i supposed to flash my Galaxy S if i can't turn it on to make my pc recognize it?
2) Brownstone mentioned PDA, CSC and MODEM files. In JG5.zip I have: CODE, CSC and MODEM files. And Odin asks me PDA, PHONE and CSC.
So how will I fill in Odin's fields?
PDA = CODE_I9000XWJG5.tar
PHONE = MODEM_I9000XXJG1.tar
CSC = CSC_I9000XXJG4.tar
??
is that correct?
Hi, i had a tab with bootloader locked and flashed pit file first then stock rom, now tab is stuck on logo and doesnt go beyond it. I can get into download mode but not on recovery mode...need help please
andrew21 said:
Hi, i had a tab with bootloader locked and flashed pit file first then stock rom, now tab is stuck on logo and doesnt go beyond it. I can get into download mode but not on recovery mode...need help please
Click to expand...
Click to collapse
Did you read one of the million other threads about "bricked" tabs?
PS. Your tab is not "bricked"
TheATHEiST said:
Did you read one of the million other threads about "bricked" tabs?
PS. Your tab is not "bricked"
Click to expand...
Click to collapse
I google this problem before posting but no solution, can you help me...i will really appreciate it
andrew21 said:
I google this problem before posting but no solution, can you help me...i will really appreciate it
Click to expand...
Click to collapse
a) Click Here
b) Choose "titles only" from the drop down menu.
c) Type "brick" into search field
d) Read
Dude, I have the exact same problem.
Made tons of searches, tried full roms, tries ROTO -full rom. nothing works..
Have tried everything, but the goddamn thing wont boot :/
Any help?
Same problem here. I even created a thread for it already recently (it's in the first page of this forum too).
Everyone out there let me know if you fix your tab and ill do the same if i fix mine..btw im sure my tab bootloader was locked since when i checked the firmware before flashing it said something like KA
andrew21 said:
Everyone out there let me know if you fix your tab and ill do the same if i fix mine..btw im sure my tab bootloader was locked since when i checked the firmware before flashing it said something like KA
Click to expand...
Click to collapse
My problem is actually a bit worse. Well, maybe. I'm stuck in the, "phone ! pc" loop. For other phones, you can just remove the battery, and then press the three buttons, but for the tab, since the battery can't be removed, I have no idea how to fix it.
You can try this, though: http://forum.xda-developers.com/showthread.php?t=939360
Here's another thread that may help you: http://forum.xda-developers.com/showthread.php?t=888071
1. Go to http://www.samfirmware.com/WEBPROTECT-p1000.htm and download the firmware for your device. (you must register first)
2 download the flashing guide and make sure you follow all the steps (without the part to remove the battery) http://www.samfirmware.com/SVC Android/P1000 Flashguide.pdf
Sent from my GT-P1000 using XDA App
Thanks everyone for help...will try all options later tomorrow and post results
Same problem here. For almost a month now my tab is stuck on boot logo. These threads don't work for everybody. Too bad.
pendevous said:
My problem is actually a bit worse. Well, maybe. I'm stuck in the, "phone ! pc" loop. For other phones, you can just remove the battery, and then press the three buttons, but for the tab, since the battery can't be removed, I have no idea how to fix it.
You can try this, though: http://forum.xda-developers.com/showthread.php?t=939360
Here's another thread that may help you: http://forum.xda-developers.com/showthread.php?t=888071
Click to expand...
Click to collapse
i have the solution on your problem igot that phone and pc icon...
all u have to do is flash the file
*open odin then connect your tab
*click repartition
*click pit then select the file u downloaded
*then click start then that's it just wait for it to pass then it'll now boot
the phone ! pc icon is also download mode so u wont have to do the download mode just connect it to you computer and make sure odin detects your tab
hope it will work for you sorry for the bad instruction
Tried your solution didnt work
Mine didn't work with Odin too. It worked with Heimdall instead.
1. First, I downloaded ROTO JMI from this thread: http://forum.xda-developers.com/showthread.php?t=939360
2. Press the power + volume down button. It'll still have the phone ! PC icon, but it will already trigger itself to go to download mode.
3. Unzip and then extract the tar from the ROTO JMI.
4. Using heimdall, put everything inside the extracted file to its appropriate filed. You won't need the moveend.
5. Flash. Do NOT remove your tab.
6. It'll auto-reboot
Very busy at the moment, really appreciate your help will try your solution later and post results
pendevous said:
Mine didn't work with Odin too. It worked with Heimdall instead.
1. First, I downloaded ROTO JMI from this thread: http://forum.xda-developers.com/showthread.php?t=939360
2. Press the power + volume down button. It'll still have the phone ! PC icon, but it will already trigger itself to go to download mode.
3. Unzip and then extract the tar from the ROTO JMI.
4. Using heimdall, put everything inside the extracted file to its appropriate filed. You won't need the moveend.
5. Flash. Do NOT remove your tab.
6. It'll auto-reboot
Click to expand...
Click to collapse
Hi, im using heimdall for the first time, can you tell me which files to select where and what options i need to select? Thank you.
andrew21 said:
Hi, im using heimdall for the first time, can you tell me which files to select where and what options i need to select? Thank you.
Click to expand...
Click to collapse
So you need a full flashing guide... Not to be like Atheist here, but that information is spelled out in multiple forums that I don't currently have time to track down.
Google -> Heimdall flashing instructions
http://www.google.com/search?aq=f&sourceid=chrome&ie=UTF-8&q=heimdall+flashing+instructions
Poof, first post.
Someday people will learn GOOGLE KNOWS EVERYTHING
pendevous said:
Mine didn't work with Odin too. It worked with Heimdall instead.
1. First, I downloaded ROTO JMI from this thread: http://forum.xda-developers.com/showthread.php?t=939360
2. Press the power + volume down button. It'll still have the phone ! PC icon, but it will already trigger itself to go to download mode.
3. Unzip and then extract the tar from the ROTO JMI.
4. Using heimdall, put everything inside the extracted file to its appropriate filed. You won't need the moveend.
5. Flash. Do NOT remove your tab.
6. It'll auto-reboot
Click to expand...
Click to collapse
Tried your method, still stuck on samsung logo, not working...someone please help!!
If you are certain you have tried all the methods listed above, with both hiemdall and odin, than it is amazing that it is still boot looped ...
If you have repartioned and tried a samfirmware rom, than I'm at a loss
Sent from my "better than an iPad" tab.
andrew21 said:
Hi, im using heimdall for the first time, can you tell me which files to select where and what options i need to select? Thank you.
Click to expand...
Click to collapse
When you unzip a compressed file, you will see a number of files inside like cahce, factory data, etc. Just put them in the corresponding field in Heimdall. As for the zImage file, put it under the image field.
Edit: @andrew - mine was in the logo for like 5 minutes. Even up to now it still takes around the same time to boot.
Sent from my GT-P1000 using Tapatalk
Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck
guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?
Please help im stuck need step by step advice still a real novice ???
charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.
Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...
Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can
Hi Guys,
I have a problem, I tried to update an T-mobile GT-i9001 to 2.3.6 with a T-mobile firmware.
But it was stuck at the amss.mbn part, and now I cannot boot the phone nor flash it.
But it has no problems getting in Download Mode.
Tried to flash with/without ops file, without Ops protect on and with it.
Tried One package box, Tried PDA box.
Tried rebooting. Tried another computer.
Tried original driver setup. And i'm flashing with Odin v4.43
Nothing works .
When I boot the phone it shows a phone and pc logo.
Thank you!
jeantje said:
Hi Guys,
I have a problem, I tried to update an T-mobile GT-i9001 to 2.3.6 with a T-mobile firmware.
But it was stuck at the amss.mbn part, and now I cannot boot the phone nor flash it.
But it has no problems getting in Download Mode.
Tried to flash with/without ops file, without Ops protect on and with it.
Tried One package box, Tried PDA box.
Tried rebooting. Tried another computer.
Tried original driver setup. And i'm flashing with Odin v4.43
Nothing works .
When I boot the phone it shows a phone and pc logo.
Thank you!
Click to expand...
Click to collapse
Apparently, your phone does not have a workable rom on it so you need to search for the correct firmware for your unit before you try again
the procedure should be
First remove battery and reinsert
1) "Select OPS" AriesVE.ops
2) Unzip/unrar the ROM you are flashing.
If it's a single .tar.md5 file, check the option "One Package" in Odin and then load the .tar.md5 file using the One Package button at the very bottom. Odin will load it and check the MD5 checksum. and should be over in ten minutes
If your ROM consists of several .smd files,
Select Boot_loader.tar under BOOT
Select Modem under PHONE
Select PDA under PDA
Select CSC under CSC .
Press Start, Flashing should take about 10 minutes
If it fails, than try again with protect ops unchecked
I tried with 3 roms with the steps u said but it still doesnt work
jeantje said:
I tried with 3 roms with the steps u said but it still doesnt work
Click to expand...
Click to collapse
what roms are trying with?
remove SD card, and Sim Card, and reinsert battery after battery pull, to try again, there is no reason for it to fail, unless you have the wrong firmware
ok, found this firmware list of Roms for I9001 on XDA..verify you got the correct one http://forum.xda-developers.com/showthread.php?t=1346245&page=3
xsenman said:
what roms are trying with?
remove SD card, and Sim Card, and reinsert battery after battery pull, to try again, there is no reason for it to fail, unless you have the wrong firmware
ok, found this firmware list of Roms for I9001 on XDA..verify you got the correct one http://forum.xda-developers.com/showthread.php?t=1346245&page=3
Click to expand...
Click to collapse
Gonna try again with GT-I9001_XEO_I9001XXKPU_I9001XXKPH_I9001OXAKP1.rar
jeantje said:
Gonna try again with GT-I9001_XEO_I9001XXKPU_I9001XXKPH_I9001OXAKP1.rar
Click to expand...
Click to collapse
Nope still stuck at amss.mbn
jeantje said:
Nope still stuck at amss.mbn
Click to expand...
Click to collapse
Ok, is your unit sim locked to any Network?
IF not can you go into recovery mode? wipe everything / factory reset and remove sd card as well as sim card before you try again
preferably use an earlier version of the rom http://forum.xda-developers.com/showthread.php?t=1346245 according to this post, its 1. I9001XEKE8 [05.2011]
and also make a post in I9001 Q&A thread, to see IF anyone else knows something about your problem
xsenman said:
Ok, is your unit sim locked to any Network?
IF not can you go into recovery mode? wipe everything / factory reset and remove sd card as well as sim card before you try again
preferably use an earlier version of the rom http://forum.xda-developers.com/showthread.php?t=1346245 according to this post, its 1. I9001XEKE8 [05.2011]
and also make a post in I9001 Q&A thread, to see IF anyone else knows something about your problem
Click to expand...
Click to collapse
Ok i finally got it to work, it looks like the ops file was corrupt that came from samfirmware.com
jeantje said:
Ok i finally got it to work, it looks like the ops file was corrupt that came from samfirmware.com
Click to expand...
Click to collapse
good job, at least you can have some peace of mind now:highfive:
Still stuck there..
xsenman said:
good job, at least you can have some peace of mind now:highfive:
Click to expand...
Click to collapse
Hi Guys, I tried all the possible steps I could find on the Internet however I'm still stuck at <1> amss.mbn download.. stage. Can't get any further, any help?
Jim.
I rooted my sgs 3 mini and install custom ROMs. I loaded CM 11 (4.4.2 kitkat) from Maclaw.pl. It worked, but after few weeks, my fhone just suddenly shut down. Tried to unroot it via odin + stock ROM, but nothing happens. Or something happens, there is the samsungs own bootlogo back. But the phone is stuck on that logo. Funny part is that when I put a charger on, there appears maclaws panda charging logo. I tried to load stock charging logo via odin, but nothing happens. Phone won't get to recovery mode, but the download mode works. Any ideas what to do? Except to throw it to trash can...
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
oldmen said:
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Won't go to recovery, have tried few weeks now. Download work, when tried to go recovery, it just showing the samsungs bootlogo
And yes tried flash stock ROM by odin plenty times.
Problems
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
blodrayn said:
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
Click to expand...
Click to collapse
Sad to hear :/ Hope someone can help us
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
oldmen said:
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Staattius said:
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Click to expand...
Click to collapse
It could be something with a corrupt param or something. Have you tried the service firmware also, not just the stock firmware?
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
deconectat said:
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
Click to expand...
Click to collapse
Tried, didn't work. Thanks for trying to help
You kan fix your phone like this
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
joker79 said:
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
Click to expand...
Click to collapse
Your pit-file have password protection?
Filpus said:
Your pit-file have password protection?
Click to expand...
Click to collapse
No
joker79 said:
No
Click to expand...
Click to collapse
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Try Now
Filpus said:
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Click to expand...
Click to collapse
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
joker79 said:
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
Click to expand...
Click to collapse
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Filpus said:
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Click to expand...
Click to collapse
You tick the box "re-partition" on odin ?
joker79 said:
You tick the box "re-partition" on odin ?
Click to expand...
Click to collapse
yep
Joker, have you found solution of this issue?
I have the same problem, also tried lot of thighs but nothing helped. Every try of using pit end-up with message "there is no pit partition", but stock FW I can falsh with no troubles.
Still the same behaviour only logo after staring phone and cannot get into recovery menu...