Database Develop

[Q] [i9000] Recovery mode problem

Originally I had 2.2 on my SGS. When Samsung released the update to 2.3 Kies couldnt update my phone. So I applied the recovery mode downgrade from 3e to 2e via Odin and flashed a custom ROM from romkitchen.org
Now I wanted to flash team ICSSGS rc3.1 rom to my phone but when I go to recovery mode all I get is a black screen.
The phone is working though, and pressing the power button boots it up.
So I installed rommanager.apk by Clockworkmod and via it, cwm recovery.
But still the same black screen.
What can I do to get recovery fully operational again?

Usually when you create a ROM from ROM Kitchen you have chosen a kernel. Which kernel you have chosen?
A recommended way: flash a custom kernel (you can DL from "Android Development" zone) via odin. Then follow the instruction from ICSSGS.
Hope I can help you!

Ah yea, I've forgotten to mention that. I've chosen Talon kernel. Can you recommend me one?

You could flash Semaphore kernel, pick the version to match your rom you have currently installed. Once you have Semaphore kernel installed you can follow the instructions to install ICS rom.
http://forum.xda-developers.com/showthread.php?t=1112908

I did this now:
1. Return to stock 2.3.3 via Odin
2. Flash root kernel
3. Install CWM recovery
4. Install ICSSGS RC4.1
5. Install devil kernel
Voila
Thanks for the help

[Q] Installing CWM

Hi.. I recently rooted my N7000 using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1329360
How do I install CWM now? I don't have any CWM even though the phone is rooted.
TIA

Which method did you use ? Root only or Root & CWM ?
You can just flash the cwm.zip in stock recovery, Or you can flash a safe kernel with root and CWM already installed, Like speedmod using Odin.
https://dl.dropbox.com/u/69014495/CWM.zip - CWM.zip
https://dl.dropbox.com/u/69014495/speedmod-kernel-n7000-ics-k3-3-Odin.tar - Speedmod Kernel (ICS)
https://dl.dropbox.com/u/69014495/GingerBread-speedmod-kernel-n7000-k2-12-Odin.tar - Speedmod Kernel (GB)

Question about EXACTLY process to flash roms

First of all, HI guys and sorry for my irregular english.
I read since a long time XDA Forums to prepare me in flash and root methods for my galaxy note.
At now, i'm using this stock rom:
[ICS][4.0.3][Stock][OpenGermany]N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
+
CF-Root-SGN_XX_OXA_LPY-v5.6-CWM5.tar + SuperSU
but i came from a stock rom: N7000UBKK2 with default kernel KK1 from Samsung and Movistar. and i have only a nandroid backup of my default Samsung/Movistar rom.
I have another gingerbread samsung stock rom, for emergency cases:
N7000UBKK8_N7000WEKK1_N7000PETKK1_HOME.tar.md5
But my point is:
I wish test some roms, before to decide which one use in dual boot system:
- Stock 4.0.4 (LRG or you suggest me LRK or another more recent ?)
- AOKP
- Criskelo
- Chrack
- Paranoid
- Cyanogen 9
And i have ready to use: Odin 1.87, Odin Mobile, SuperSU (if is necesary), Abyss 4.2 (CW/Red) for recovery, Abyss 4.2 CW for odin and CF-Root for LRG (if is necesary i can find one for LRK or another recent)
But i'm confused about how exactly do that. Yes i know there are many... MANY topics about that but, I only need a bit of help guys to understand the exactly process and avoid EMMC BUG...
If i understant correctly, i must follow this method, please correct me if i'm grong:
01 - Check if i'm root and settings are in depuration + unkown sources
02 - Because i'm using an ICS Kernel i need first downgrade to Abyss for continue
03 - Reboot in Recovery and flash Abyss4.2 CW/Red, after "reboot recovery" and make wipes
Which one should i use for this CW or Red Version?
...
But after this i have problems, because i have ever red: before flash a custom rom you need a same base. Then ok i think for use for example CM9, or Paranoid, or Criskelo, I need a 4.0.4 rom then i have a:
[ICS][4.0.4][Stock][OpenGermany]N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5
Ready to flash but...
If a this moment following the previous steps, i'm in recovery of Abyss CW/Red:
Should i reboot using this Abyss kernel in download mode to flash a stock LRG ?
...
Or in another reality, is not needed flash Abyss to flash a stock rom using Odin ?
I wish first test the Stock 4.0.4 before any other custom to make a base point of comparison
...
And after, using 4.0.4 LRG + CF-Root, is safe use install from zip file in recovery to flash any other rom like CM9 for example ? or i need use abyss recovery (before flash it using CR-Root recovery) to flash any other rom (ICS) ?
Again i hope you can help me with these questions, and really sorry is the text is so long but i prefeer to know rightly how to procced before brick my phone, because i still waiting for a JIG (you know, for emergency...)
Tnks to all.

First of All You need to know that there is no need for the same base to flash the ROM.
Second thing You have to use Abyss Redpill 4.2 Original Logo Recovery(It uses GB Kernel) If you are not going to downgrade to GB and want to flash on top of your current ROM
Third Whenever you want to flash CM9/AOKP/AOSP first downgrade to GB(Pre rooted Rom) OR GB then Root it and then flash the rom by going it to CWM recovery.
Fourth thing is Never flash Abyss using PC Odin.
Proper Way to Flash CM9/AOSP/AOKP for a clean install (You will lose data)
Download a prerooted GB Rom from here ===> http://forum.xda-developers.com/showthread.php?t=1424997
Reboot your phone is Download Mode. (Vol Down+Home+Power)
Open Pc Odin on your Pc/Laptop
Connect your phone to PC via USB Cable
A Small Box in Left Upper turns Yellow.It means your phone is recognized by Odin
Now Select GB File under PDA Tab (Do not change any settings)
Start Flash
YOU WILL HAVE A GB ROM ON YOUR PHONE WITH ROOT
Now Go to Recovery
Install Zip from SD Card
Flash Rom
Flash Gapps
Do All 3 Wipes (Cache/Dalvik/Data)
Reboot System.

you might wanna root first and backup efs before jumping to any rom that is different csc then you previous one.
Sent from my GT-N7000 using Tapatalk 2

Tnks to all, at now i'm testing some roms and kernels, looking for a "perfect" mate for my paranoid android (tableted rom), and in my tests i still looking for a decent kernel because (may this is my imagination but...) CF-Root LRG kernel in LRK Rom (Chrack's Rom) consume excessively batery but i will test in an ordinary day because may is not problem from rom, this should be a problem from kernel...
I read before: SpeedMod kernel was developed just for this situation: low batery comsumption + high perfomance...

[Q] Safe kernel On JB

Hi is this a safe kernel on my device or not ,
and please another thing how can I root without CWM.
thnkxxxx in advance

Hi, just flash a philz kernel with PC Odin (I assume you're not already rooted), you'll get root + safe kernel

Flash Philz kernel through stock recovery (copy the zip file to your external sd card). That way it won't raise the flash counter.

Flash Philz kernel zip from recovery is better. Rooted and on safe stock kernel.

Need some clarification , hardbrickbug JB?

Hi. I am new into flashing in Android and considering of flashing to another rom , sweet rom to be exact. But there's this hard brick bug that is preventing me to do so. I am currently on Stock Jelly bean and it's too laggy , that's the reason why i wanted to flash to another Rom.
Anyway , is the JB kernel still not safe? As shown in the thread of sweet rom , it states there i would just have to flash my current stock kernel to Philz JB Kernel , to proceed into wipe. Some of the instructions are so foreign to me. Is the risk there? Also , i tried Chainfire's gotbrickbug app and it states i do have. That's why i am afraid into further flashing before i get some more information since i am still a newbie!
Thanks in advance bros!

hi,
asfar as i know you just have to flash a safe kernel
(i prefer K5-5: http://forum.xda-developers.com/showthread.php?t=2181599 - touristinparadise.blogspot.de/2013/03/samsung-galaxy-note-jb-download.html) trough odin.
after flashing you have the CWM, from there you can flash every ROM you want
I rooted on ICS 4.0.4 with CWM.zip x) not recommended because the kernel isnt safe (?), but it worked for me

mindfck1337 said:
hi,
asfar as i know you just have to flash a safe kernel
(i prefer K5-5: http://forum.xda-developers.com/showthread.php?t=2181599 - touristinparadise.blogspot.de/2013/03/samsung-galaxy-note-jb-download.html) trough odin.
after flashing you have the CWM, from there you can flash every ROM you want
I rooted on ICS 4.0.4 with CWM.zip x) not recommended because the kernel isnt safe (?), but it worked for me
Click to expand...
Click to collapse
Hmm , SweetROM instructions states to flash Philz JB kernel before wiping and then flashing? Sorry man , i'm quite a bit confused!

you can flash any safe kernel first,, philz or speedmod or hydracore.. as when you install the new rom.. it will replace the kernel with its own