[Q] Accidently remove everything - One (M7) Q&A, Help & Troubleshooting

Hi,
After accidently wipe averything off my phone it will not boot again. I'm still able to go into bootloader mode but I have no access to my sd card by using the usb. Pc recognized my phone but cannot see the sd card. (win7) My phone is s-off but and not rooted anymore. I can still boot into revovery with TWRP. Is there maybe something that i should mout or unmount. I also got a microsd to usb cabel where i put the restore files on a usb stick but that doesn't work. I don't now that to do. I have read a lot about using ruu and stuff but it's not verry clear for me.
It's just that the phone doesn't recognized my SD. When this is ok I think that i just can put a rom into it and install again with the TWRP.
Is there maybe a solution for this ?
Sorry for the bad English
Thanks

wim1975 said:
Hi,
After accidently wipe averything off my phone it will not boot again. I'm still able to go into bootloader mode but I have no access to my sd card by using the usb. Pc recognized my phone but cannot see the sd card. (win7) My phone is s-off but and not rooted anymore. I can still boot into revovery with TWRP. Is there maybe something that i should mout or unmount. I also got a microsd to usb cabel where i put the restore files on a usb stick but that doesn't work. I don't now that to do. I have read a lot about using ruu and stuff but it's not verry clear for me.
It's just that the phone doesn't recognized my SD. When this is ok I think that i just can put a rom into it and install again with the TWRP.
Is there maybe a solution for this ?
Sorry for the bad English
Thanks
Click to expand...
Click to collapse
Yeah, you can use a USB OTG cable. Put a rom into the usb, and using an otg cable, u can flash a rom within TWRP. Alternately, u can "adb sideload" a rom zip to the phone

raghav kapur said:
Yeah, you can use a USB OTG cable. Put a rom into the usb, and using an otg cable, u can flash a rom within TWRP. Alternately, u can "adb sideload" a rom zip to the phone
Click to expand...
Click to collapse
Thanks I will try this later on, do i have to mount anything ?

Just copy your rom as raghav kapur said and then you can flash your rom without any doubts

wim1975 said:
Thanks I will try this later on, do i have to mount anything ?
Click to expand...
Click to collapse
Here's the guide:
http://forum.xda-developers.com/showthread.php?t=2559200

raghav kapur said:
Here's the guide:
http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
Hi just to say that everthing is working fine again. Thanks a lot for your help.
Greetz

Don't forget to hit thanks button bro

Boachti said:
Don't forget to hit thanks button bro
Click to expand...
Click to collapse
Done (a few days ago Thanks again)

[emoji4] [emoji4] [emoji4]
أرسلت من E2003 بإستخدام تاباتلك

Related

[Q] Galaxy Note Recovery

I downloaded the latest CM10 ROM but when I was flashing it I came across an error, and now I have no other ROM on my phone so I need to transfer one from my PC, but it doesn't go past recovery mode. So i searched XDA and found an answer that said to MOUNT USB from recovery on clockwork mod, but that didn't help, my PC doesn't recognize the phone except as an unknown device, i.e i cant explore it and drivers i found on XDA didn't help to recognize the device. Please help. I have the new CM10 ROM downloaded and ready, how do I transfer it to my phone?
kautilyadas said:
I downloaded the latest CM10 ROM but when I was flashing it I came across an error, and now I have no other ROM on my phone so I need to transfer one from my PC, but it doesn't go past recovery mode. So i searched XDA and found an answer that said to MOUNT USB from recovery on clockwork mod, but that didn't help, my PC doesn't recognize the phone except as an unknown device, i.e i cant explore it and drivers i found on XDA didn't help to recognize the device. Please help. I have the new CM10 ROM downloaded and ready, how do I transfer it to my phone?
Click to expand...
Click to collapse
Use a card reader if you have an external SD card in your Note.
chasmodo said:
Use a card reader if you have an external SD card in your Note.
Click to expand...
Click to collapse
well i don't have a microSD card reader, i have an SD card reader on my laptop. but isn't there anyway to do it via PC? it used to recognize my phone fine until this happened
Cant put in download mode?
Sent from my GT-N7000 using xda app-developers app
kautilyadas said:
well i don't have a microSD card reader, i have an SD card reader on my laptop. but isn't there anyway to do it via PC? it used to recognize my phone fine until this happened
Click to expand...
Click to collapse
i dont know which rom were u on before... but i am on stock 404 with philz kernel which has cwm v6.0.1.4 semi touch recovery..
just tried.. booted into recovery... mounts and storage.. mount USB drive..
its shows both the internal storage and SD card.. so it works..
praetorius said:
Cant put in download mode?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
nope. why, how would that help?
nokiamodeln91 said:
i dont know which rom were u on before... but i am on stock 404 with philz kernel which has cwm v6.0.1.4 semi touch recovery..
just tried.. booted into recovery... mounts and storage.. mount USB drive..
its shows both the internal storage and SD card.. so it works..
Click to expand...
Click to collapse
well not for me, tried on different computers too. idiotic question: do i require different drivers :/ because i don't know why it wouldn't detect otherwise
actually no.. i just have kies installed and samsung ADB drivers
---------- Post added at 09:21 PM ---------- Previous post was at 09:19 PM ----------
kautilyadas said:
nope. why, how would that help?
Click to expand...
Click to collapse
if u can put it in download mode u can download a GB rom and install it and then bootup ur phone and do wat u wanted
kautilyadas said:
well not for me, tried on different computers too. idiotic question: do i require different drivers :/ because i don't know why it wouldn't detect otherwise
Click to expand...
Click to collapse
Try to this Samsung driver pack. see if it helps at all.
http://www.mediafire.com/?ager59qlwy35q50
should also check/change cable and change computer as well.
forest1971 said:
Try to this Samsung driver pack. see if it helps at all.
http://www.mediafire.com/?ager59qlwy35q50
should also check/change cable and change computer as well.
Click to expand...
Click to collapse
thanks to all of you, but i didn't have access to internet at that time, i got a microUSB reader and transfered the file. now i'll backup so such noob stuff doesn't happen again :/

[Q] Boot looping Exhibit II

So, I recently used an app (app2sd or link2sd or one of those kinds of apps) that swapped my internal memory with my external memory. It requested me to do a reboot, so I did. After the reboot, the phone just keeps looping through the cyanogenmod boot animation. What I think is that since my SD card doesn't have the booting files that my internal storage has, it doesn't boot (correct me if I'm wrong), since its reading the sd card as if its the internal storage and vice versa for the internal memory. Any way I could fix this? So far all I can really do on my phone is boot into recovery mode and Odin mode. I also tried to flash my SD card with Cyanogenmod, but turns out I don't have the zip for it on my internal memory (now external), and I can't access the internal memory on my computer, only the SD card (internal). Also, I've tried using adb shell, but whenever I try it always comes up with "Error: device not found" so that wont work for me. Kinda assuming I'm outa luck D:
I'm a little confused here if I got this right you used an app to SD app now your external SD is reading as your internal ? What recovery you using cwm?
schuylkillparanormal said:
I'm a little confused here if I got this right you used an app to SD app now your external SD is reading as your internal ? What recovery you using cwm?
Click to expand...
Click to collapse
Yes thats correct; my internal is now reading as my external and vice versa with my external (its reading as internal). And Yes I'm using CWM
phatlaity123 said:
Yes thats correct; my internal is now reading as my external and vice versa with my external (its reading as internal). And Yes I'm using CWM
Click to expand...
Click to collapse
Do an catalog and it will tell you whats causing the bootloop then google it.
schuylkillparanormal said:
Do an catalog and it will tell you whats causing the bootloop then google it.
Click to expand...
Click to collapse
I'm sorry, a catalog? I'm a noob on phones lol
phatlaity123 said:
I'm sorry, a catalog? I'm a noob on phones lol
Click to expand...
Click to collapse
Logcat sorry auto correct replaced it lol. Check this out it well walk you through it.
http://forum.xda-developers.com/showthread.php?p=21802298
schuylkillparanormal said:
Logcat sorry auto correct replaced it lol. Check this out it well walk you through it.
http://forum.xda-developers.com/showthread.php?p=21802298
Click to expand...
Click to collapse
Any code I try to use it just says "device not found" and for my device there are 2 ADB Interface devices in device manager with "SAMSUNG Android Composite ADB Interface". Any way how to recognize me device?
phatlaity123 said:
Any code I try to use it just says "device not found" and for my device there are 2 ADB Interface devices in device manager with "SAMSUNG Android Composite ADB Interface". Any way how to recognize me device?
Click to expand...
Click to collapse
Nope it soft bricked not to worry though. Your going to need an usb jig there like 5 dollars at usbjig.com once you get that reformat your sd card make sure you have usb driver and boot image and nessary files to flash to stock via odin at that point google and youtube is your best friend because i have no experince dealing with odin. The USB jig is going to force you phone into odin so you can load the nessary files to flash back to factory if done properly.
Which version of CWM are you using? If you are on 6x you can go to mounts and storage and then mount USB to copy a ROM to your phone. If you are on 5x you will have to update to 6x with Odin.
Edit: If you can't mount storage but you can get into download mode, you should follow the directions to flash to stock from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
meekrawb said:
Which version of CWM are you using? If you are on 6x you can go to mounts and storage and then mount USB to copy a ROM to your phone. If you are on 5x you will have to update to 6x with Odin.
Edit: If you can't mount storage but you can get into download mode, you should follow the directions to flash to stock from here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G
Click to expand...
Click to collapse
The USB ain't being recognized
schuylkillparanormal said:
Nope it soft bricked not to worry though. Your going to need an usb jig there like 5 dollars at usbjig.com once you get that reformat your sd card make sure you have usb driver and boot image and nessary files to flash to stock via odin at that point google and youtube is your best friend because i have no experince dealing with odin. The USB jig is going to force you phone into odin so you can load the nessary files to flash back to factory if done properly.
Click to expand...
Click to collapse
Ok well I'll look into this. Thanks for the info!
Download mode=Odin mode.
If you can already get into Odin by holding volume down and power then you don't need a jig.
meekrawb said:
Download mode=Odin mode.
If you can already get into Odin by holding volume down and power then you don't need a jig.
Click to expand...
Click to collapse
Ok but what is being able to get into Odin mode going to do for me..?
if you can get into recovery flash a new rom. if you can get into download mode restore to stock using odin
smartguy044 said:
if you can get into recovery flash a new rom. if you can get into download mode restore to stock using odin
Click to expand...
Click to collapse
AH. Yea I've just did that and now its working good as new. Thanks!

Htc one soft brick(i think) help!

I tried installing a rom on my HTC one and it messed everything up. I have no data and no OS on my phone. I i did not make a backup as well....
ive been trying to use twrp sideload but my device wont connect to adb. what do i doooo? i can only get into the fastboot menu and trwp recovery. can i use a otg cord and transfer another rom into my phone or do i have to wait for att ruu? please help me! thanks
Miilkman said:
I tried installing a rom on my HTC one and it messed everything up. I have no data and no OS on my phone. I i did not make a backup as well....
ive been trying to use twrp sideload but my device wont connect to adb. what do i doooo? i can only get into the fastboot menu and trwp recovery. can i use a otg cord and transfer another rom into my phone or do i have to wait for att ruu? please help me! thanks
Click to expand...
Click to collapse
you should be able to access adb even without sideload
Miilkman said:
I tried installing a rom on my HTC one and it messed everything up. I have no data and no OS on my phone. I i did not make a backup as well....
ive been trying to use twrp sideload but my device wont connect to adb. what do i doooo? i can only get into the fastboot menu and trwp recovery. can i use a otg cord and transfer another rom into my phone or do i have to wait for att ruu? please help me! thanks
Click to expand...
Click to collapse
Does it say anything when you type the adb lust devices command?
Sent from my HTC One using xda premium
matt95 said:
you should be able to access adb even without sideload
Click to expand...
Click to collapse
My device won't connect to adb no matter what I do.. It just says adb is out of date killing server, and I have the most updated adb too. I have the correct drivers too
Miilkman said:
My device won't connect to adb no matter what I do.. It just says adb is out of date killing server, and I have the most updated adb too. I have the correct drivers too
Click to expand...
Click to collapse
so that's pc's fault, try to reinstall the sdk completely
matt95 said:
so that's pc's fault, try to reinstall the sdk completely
Click to expand...
Click to collapse
Ok I'll try that!
But if that doesn't work can I just USB otg transfer a rom onto my phone and then flash it?
Miilkman said:
Ok I'll try that!
But if that doesn't work can I just USB otg transfer a rom onto my phone and then flash it?
Click to expand...
Click to collapse
never tried that feature by myself so i can't say anything about it, however you should be able to use adb which is much more simple
matt95 said:
never tried that feature by myself so i can't say anything about it, however you should be able to use adb which is much more simple
Click to expand...
Click to collapse
Alright I'll try adb on another pc see if that works...
Miilkman said:
Alright I'll try adb on another pc see if that works...
Click to expand...
Click to collapse
good idea, try also to change the usb if it gives problems again
matt95 said:
good idea, try also to change the usb if it gives problems again
Click to expand...
Click to collapse
if this doesnt work what do i do?
Use the all in one toolkit and flash twrp, mount your USB in twrp using an otg cable. Flash the ROM from usb
Sent from my Nexus 10 using XDA Premium HD app
Miilkman said:
if this doesnt work what do i do?
Click to expand...
Click to collapse
suicide :laugh: just kidding we'll find a solution in that case
Bladerunner1825us said:
Does it say anything when you type the adb lust devices command?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
when i type adb devices it say killing adb server then starts up a daemon....
Im having this same issue, after trying to flash android revolution on my unlocked/rooted rogers One, it froze on the successfully installed part and I had to wait for it to die to try to restart it.
I cannot boot into recovery or connect it to my computer in any way, ./adb reboot bootloader doesnt work it says cannot find device.
When I vol down + power the bottom lights just blink and the phone does nothing.
Any idea on how I can reflash the phone?
Slicka70 said:
Im having this same issue, after trying to flash android revolution on my unlocked/rooted rogers One, it froze on the successfully installed part and I had to wait for it to die to try to restart it.
I cannot boot into recovery or connect it to my computer in any way, ./adb reboot bootloader doesnt work it says cannot find device.
When I vol down + power the bottom lights just blink and the phone does nothing.
Any idea on how I can reflash the phone?
Click to expand...
Click to collapse
I have this same problem as well. I also believe I have bricked my HTC One (ATT) and I tried to flash the stock boot.img but when connected to my computer, the phone is completely empty with no download folder, apps folder or anything like it was on stock. I'm on TWRP Recovery but how to I reinstall the boot.img and fix the phone and put it back into factory settings?

Need some advice please

Hi my htc one has gone into meltdown.
Whilst clearing it all of,ive wiped the os off. now all ive got is twrp,i cant mount it with this recovery to get a rom back on..
Can i install cwm..? will that mount the sd card still? via fastboot for the mount function
or will this work?
http://htconeroot.com/htc-one-tutorials/how-to-copy-files-to-htc-one-using-twrp-mount-and-adb/
are there any other options to get a rom back on there, bit worried to be honest!
arknailed7754 said:
Hi my htc one has gone into meltdown.
Whilst clearing it all of,ive wiped the os off. now all ive got is twrp,i cant mount it with this recovery to get a rom back on..
Can i install cwm..? will that mount the sd card still? via fastboot for the mount function
or will this work?
http://htconeroot.com/htc-one-tutorials/how-to-copy-files-to-htc-one-using-twrp-mount-and-adb/
are there any other options to get a rom back on there, bit worried to be honest!
Click to expand...
Click to collapse
Sideload / Push
TWRP / Advanced / Sideload
From PC adb /fastboot folder
you use
adb sideload yourRpom.zip
or
adb push nameofrom.zip /sdcard/
just make sure the rom is in the same folder as adb / fastboot
Just curious, why people always talking about side-load a ROM.zip when they can install a ROM.zip with an OTG cable connected ? Is it the TWRP OTG not working ? Sorry for asking, just curious.
_
I'll give it a try when back home. If that doesn't work is there a back up plan to that ?
ckpv5 said:
Just curious, why people always talking about side-load a ROM.zip when they can install a ROM.zip with an OTG cable connected ? Is it the TWRP OTG not working ? Sorry for asking, just curious.
Click to expand...
Click to collapse
TWRP OTG works great ... few people have them is the problem
ckpv5 said:
Just curious, why people always talking about side-load a ROM.zip when they can install a ROM.zip with an OTG cable connected ? Is it the TWRP OTG not working ? Sorry for asking, just curious.
Click to expand...
Click to collapse
ckpv5 said:
Just curious, why people always talking about side-load a ROM.zip when they can install a ROM.zip with an OTG cable connected ? Is it the TWRP OTG not working ? Sorry for asking, just curious.
Click to expand...
Click to collapse
Not everyone has a OTG cable, so it's easier to assume they haven't and post a solution that's appropriate to their needs.
Sent from my GT-I9505 using XDA Premium 4 mobile app
_
I'll give it a try when back home. If that doesn't work is there a back up plan to that ? I read somewhere an error might happen lie device not found..is there a solution to that guys also?

Question the phone got crazy and rebooting himself

mi 11 pro with 12.5.12 stable
sorry to ask for the second time , but suddenly the phone began to rebooting himself again and again and when im entering the twrp and try to reboot system im getting a list with a few red raws writing something about error in system .
i dont know how to stop it and i cant do anything with my phone .
please help me
the twrp is working but i cant put the rom file on my phone because the pc doesnt recognize the phone . what to do? how can i put the romon my phone and flash it? ...i think im in a situation of bootloop...
mmns said:
the twrp is working but i cant put the rom file on my phone because the pc doesnt recognize the phone . what to do? how can i put the romon my phone and flash it? ...i think im in a situation of bootloop...
Click to expand...
Click to collapse
Try to copy the ROM from the computer to USB and USB to ur phone
Hi,
i always use an USB-Stick for the ROM's to flash. Just to be sure i can see an zip to flash under every circumstances. (Except those phones which need to be flashed over USB - but the ROM is visible on the PC)
cya
Did you try to format your device?
Dip Air said:
Try to copy the ROM from the computer to USB and USB to ur phone
Click to expand...
Click to collapse
ive made it with sd card reader and didnt make it
mmns said:
ive made it with sd card reader and didnt make it
Click to expand...
Click to collapse
Can u show me the screenshot of the error? If u don't mind.

Categories

Resources