Hi, i'm trying to fix my friend's phone.
It was on cm11 and sudenlly wi-fi and bluetooth wouldn't work anymore, i tryed a lot of custom roms and all of them had the same problem.
I flashed back to stock with ODIN(with the right version for the N model), and goot stuck on bootloop. I tryed it with lots of firmwares and all of'em would bootloop.
Now i flashed back cm11 with ODIN and back to zero because i still don't get wi-fi and bluetooth.
querobolo said:
Hi, i'm trying to fix my friend's phone.
It was on cm11 and sudenlly wi-fi and bluetooth wouldn't work anymore, i tryed a lot of custom roms and all of them had the same problem.
I flashed back to stock with ODIN(with the right version for the N model), and goot stuck on bootloop. I tryed it with lots of firmwares and all of'em would bootloop.
Now i flashed back cm11 with ODIN and back to zero because i still don't get wi-fi and bluetooth.
Click to expand...
Click to collapse
As far as I know, CM11 does not work directly on the S3 Mini. There are a few options, the most popular being the one from Maclaw.
naevtamarkus said:
As far as I know, CM11 does not work directly on the S3 Mini. There are a few options, the most popular being the one from Maclaw.
Click to expand...
Click to collapse
That was the one I was using, but i had the problem on every ROM i've tryed.
Related
Hi Guys,
I'm having a bit of a Problem here.
Today I Installed Cyanogen Mod to my Phone. Everything worked just fine but I didn't liked it much so I reflashed to Stock Rom.
So far so good now the Problem.
I Accedently flashed a Greece ROM (I'm from Germany) The Rom worked fine but I don't understood a word.
So I got back to Download Site and found an Austrian Version. I downloaded it and tried to Flash it to my device but at one Point The Installation got stuck.
I waitet an Hour but It weren't going any further.
I didn't saw another option to get out of this and pulled the USB Cable out.
Now the Phone is only running in Download mode.
The Recovery mode isn't available. Only a screen with a Phone a PC and an ! in the middle appears.
I already tried to install the Stock rom again (tried another one as well) But it always gets stuck at one Point.
Please help me.
Greetings
Solved. I Flashed FROYO and then Gingerbread again worked fine!
Hmm back to original Rom.
minimodx addict
Hello everyone...
I always flash new roms to my GN...most of them were working fine...but some of the roms seems have some problems....
After I flashed a new rom, it always works perfectly...i can reboot/ restart and restore the apps without any problem....but few days later....it reboots automatically...and stuck at boot screen...but even i search the thread of the custom roms...seems no one got this problem....I can boot to CWM ....and i tried to fix it ....even i install the rom again...it still stuck at the boot screen....and i finally wipe the data....then it can boot normally again....then i restore my apps once again....everything return normal..........for few days only....and it stuck at boot screen again....therefore....i can only enjoy the rom for few days (maybe 3-4 days)..work perfectly for few days....but it will crash accidently without any symptom..........
Then i tried other roms...........some roms dont have this problem (mostly aokp/aosp base)...and some roms usually have this problem (non-aokp/aosp base)....after suffer this problem several times for different roms.....i just think that it may not the rom's problem..but i cant figure out why this will happen....I reli want to know is there anyone got this problem too or any method to tackle this problem...
Thx alot and sorry for my poor english....
Exactly which ROMs reboot
Is it jellybean touchwiz ROMs?
Sent from my Nexus 7 using Tapatalk 2
Yes..Touchwiz roms....for example...AmniX"-Xperia Note , SlimWizz5 Tablet...
Only work fine for 3-4 days....:crying:
You should reinstall apps from the market, restoring apps from backup may leave your phone in a strange state especialy in JellyBean.
you should also flash the JellyBean bootloader.
Hope that helps.
Hi all
I have a GT-S6500 , initially it had the Branded Firmware AILD2 Italy TIM , after i installed the Firmware version XXLD2 and the Peter's Rom , everything has gone perfectly for several months until it went in bootloop.
So i installed the last firmware the XXLK2 ITA version , all works expect the wifi , at boot does not start and if i try to activate it says "Error the wifi cannot be activated ".
I reinstalled the last Branded Italy Tim firmware the AIMD3 , but it shows the same error , so i tried with XXLD2 ....same error :crying: , again I tried the XXLD2 and fater the XXLK2 with cyanogemod 10.1 , 10.2 and 11 but nothing changes.
Would you suggest any advice ? I do not Know how to do.:crying: , any info would be grateful .
Thanks Bye Bye
Sorry for my bad english
Any advice? :crying:
go back to stock rom and stock firmware , if you don't have a working wifi then = hardware problem.
keep it simple
ward0 said:
go back to stock rom and stock firmware , if you don't have a working wifi then = hardware problem.
keep it simple
Click to expand...
Click to collapse
Not entirely true on hardware problem. Might be a (config?) mismatch, I have encountered something similar as well.
When I went from stock to TheWhisp' CM11-nightly build.
After you've flashed a build (be it stock or TheWhisp' build), have you tried putting it back to factory settings in recovery yet?
Raan03 said:
Not entirely true on hardware problem. Might be a (config?) mismatch, I have encountered something similar as well.
When I went from stock to TheWhisp' CM11-nightly build.
After you've flashed a build (be it stock or TheWhisp' build), have you tried putting it back to factory settings in recovery yet?
Click to expand...
Click to collapse
Ofc he has to fac reset when he goes back to stock rom ..
I have the same problem with the squadzone OC kernel .. I will get this problem if I use the LK2E firmware series and the latest firmwares .. but It works perfectly with DXLD1 ..
just saying ..
it happens because you updated the kernel, it now has a slightly different version string which doesn't match the wifi module's, and it [the module] gets tainted (= cannot be loaded)
TheWhisp said:
it happens because you updated the kernel, it now has a slightly different version string which doesn't match the wifi module's, and it [the module] gets tainted (= cannot be loaded)
Click to expand...
Click to collapse
Is it possible to edit the Stockrom to be match with the kernel ??
you also need to updated the wifi module which is named ar6000.ko on gingerbread
TheWhisp said:
you also need to updated the wifi module which is named ar6000.ko on gingerbread
Click to expand...
Click to collapse
okay .. thank !! I'll try ... if I can :silly: ...
I only do if this happened to mine i turn off my phone then reboot then turn the wifi on
Hi all,
Can anyone help with a problem after flashing to 4.4.2?
I've got an i9295 that was provided by T-Mobile in the UK. I flashed my phone with I9295XXUCNE4_I9295NEECNE4_I9295XXUCNE4_HOME.tar.md5 which is designed for the 'Nordic countries' but I was assured works with UK phones, "all i9295" devices. Everything went swimmingly until the phone booted up. Everything is working and the flashing went as expected (I've done it LOADS with my old Galaxy S2). However, I can't turn on the WiFi. It doesn't even light up the icon.
How can I diagnose the issue? Or can anyone provide a ROM that might work better with my phone? Heck, I'd even settle for the stock ROM so at least I can use the WiFi.
Thanks for any help you can provide! I'm familiar with flashing ROMs so I'm not a noob.
Cheers,
Richard.
i'm having the same problem as well. Need help please
weihong892 said:
i'm having the same problem as well. Need help please
Click to expand...
Click to collapse
In the end I had to find a stock firmware to put the phone back to 4.2.2 and it's all working again, although it's not Kit Kat anymore, of course. There is a really good list of stock firmwares here: http://www.mrcrab.net/androidfirmware/GT-I9295/Samsung-Galaxy-S4-Active-GT--I9295.html
I guess I'll have to wait for Kit Kat...
Hello, after trying several custom roms, I have had a problem since last night. Each time, I flash a rom, the wifi does not work, when I activate it turns in circles and deactivates, no matter the rom or the clean flash. I even tried fastboot-w, I have the same problem, does anyone have an idea?
John974 said:
Hello, after trying several custom roms, I have had a problem since last night. Each time, I flash a rom, the wifi does not work, when I activate it turns in circles and deactivates, no matter the rom or the clean flash. I even tried fastboot-w, I have the same problem, does anyone have an idea?
Click to expand...
Click to collapse
Search for restore "persist"