Database Develop

[Solved] S-off with hboot 1.55 issues, need help.

I cannot seem to get s-off with rumrunner. I'm rooted on hboot 1.55. I've tried on xp and Windows 8 on a few different pc's to no avail. I last followed a guide and did it on a live Ubuntu USB as my laptop runs the 64bit distribution. I get to a line that says "sanitizing, skunky rum" and then says wait. Then periods fill across the line and it sits for a while. Then several T's are displayed and the command prompt comes back up. S is not off.
I'm at a loss here. Anyone have any ideas? I've read pretty exhaustively and I'm not finding any solution.
Thanks.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Try this... It's actually really easy... Good luck
http://forum.xda-developers.com/showthread.php?t=2606577
Sent from my LG-D803 using xda app-developers app

I tried that. That resulted in the line of T's and did not give me s-off.
Sent via MobileBlast!

Bradlees said:
I tried that. That resulted in the line of T's and did not give me s-off.
Sent via MobileBlast!
Click to expand...
Click to collapse
Could be because you ran it on 64bit and it's stated on rumrunner 's site and in step one of my instructions to use a 32bit version. For some reason 64bit isn't supported. You don't have to install it just throw it on a disk and boot into the "try" mode.
Anyways, good luck
Sent from my LG-D803 using xda app-developers app

No, I ran it on a live USB with a 32 bit distribution after I realized my mistake when it failed on my 64 bit. I tried the process 3 times on the the 32 bit all with the same result before I gave up and asked for help.
Sent via MobileBlast!

Bradlees said:
No, I ran it on a live USB with a 32 bit distribution after I realized my mistake when it failed on my 64 bit. I tried the process 3 times on the the 32 bit all with the same result before I gave up and asked for help.
Sent via MobileBlast!
Click to expand...
Click to collapse
what's your "version-main"? or even better post a "fastboot getvar all" (excluding IMEI and s/n)

Bradlees said:
No, I ran it on a live USB with a 32 bit distribution after I realized my mistake when it failed on my 64 bit. I tried the process 3 times on the the 32 bit all with the same result before I gave up and asked for help.
Sent via MobileBlast!
Click to expand...
Click to collapse
That sucks... The only other suggestion is something I was just informed of but didn't have to do myself.
In Ubuntu they had to open the Ubuntu software Centre, edit tab, software sources and make sure that "supported free and open source software" is selected.
Sorry wish I had more ideas
Sent from my LG-D803 using xda app-developers app

nkk71 said:
what's your "version-main"? or even better post a "fastboot getvar all" (excluding IMEI and s/n)
Click to expand...
Click to collapse
version: 0.5
version bootloader: 1.55.0000
version baseband: 4A.21.3263.03
version cpld: none
version microp: none
version-main: 3.24.531.3

Bradlees said:
version: 0.5
version bootloader: 1.55.0000
version baseband: 4A.21.3263.03
version cpld: none
version microp: none
version-main: 3.24.531.3
Click to expand...
Click to collapse
and the rest please , eg:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3801mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Also what ROM are you on?

nkk71 said:
and the rest please , eg:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3801mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Also what ROM are you on?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3896mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm on just on stock rooted. Is that why? Do I just need to flash a ROM?

Bradlees said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3896mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm on just on stock rooted. Is that why? Do I just need to flash a ROM?
Click to expand...
Click to collapse
from rumrunner: "as long as you have root) and also custom roms. We DO prefer users have an unsecure kernel", so try ARHD 31.6 from here: http://forum.xda-developers.com/showthread.php?t=2183023 (it's already rooted & unsecured kernel)
though I have to mention that other T-Mobile users are having issues, but usually on firmware 3.63.111.x
Good luck

nkk71 said:
from rumrunner: "as long as you have root) and also custom roms. We DO prefer users have an unsecure kernel", so try ARHD 31.6 from here: http://forum.xda-developers.com/showthread.php?t=2183023 (it's already rooted & unsecured kernel)
though I have to mention that other T-Mobile users are having issues, but usually on firmware 3.63.111.x
Good luck
Click to expand...
Click to collapse
So I'm sure I'm reading this right: I don't need a custom ROM, correct? Its not listed as a prerequisite on the rumrunner site, just root. I could perhaps just flash an unsecure kernel over my stock rom?
Thanks, btw

@nkk71 for the win...the kernel was going to be my next suggestion. After doing some googling lol
Hope it works. If anyone can helps its nkk71

Bradlees said:
So I'm sure I'm reading this right: I don't need a custom ROM, correct? Its not listed as a prerequisite on the rumrunner site, just root. I could perhaps just flash an unsecure kernel over my stock rom?
Thanks, btw
Click to expand...
Click to collapse
yes you could try it that way (ie flash custom kernel), but why not go for ARHD 31.6? it's already rooted, unsecured kernel, has USB debugging enabled, has Power->Fast boot disabled (I think), has adb shell su already granted.
if it's just about not wanting to erase apps+data+settings, then just do a nandroid of your current setup, flash ARHD 31.6, get S-Off (hopefully) and restore nandroid afterwards.

I just picked up a new ONE after returning it for the camera colors in dark light (had it for 3-4 months HBOOT 1.44)
this new one is on HBOOT 1.55 to use rumrunner I had to:
1) HTC DEV unlock
2) flash custom recovery
3) install CM 10.2 (the final release works best CM 11 did not work)
4) flash SU zip
5) run rumrunner
With this process it had to pour less than with hboot 1.44 and cm 10.2. went pretty quickly if you have done it before. But the kernel is almost definitely the problem.
have faith it can be done

nkk71 said:
yes you could try it that way (ie flash custom kernel), but why not go for ARHD 31.6? it's already rooted, unsecured kernel, has USB debugging enabled, has Power->Fast boot disabled (I think), has adb shell su already granted.
if it's just about not wanting to erase apps+data+settings, then just do a nandroid of your current setup, flash ARHD 31.6, get S-Off (hopefully) and restore nandroid afterwards.
Click to expand...
Click to collapse
Success! First try it worked after flashing the ARHD ROM on windows xp pc. Thanks.

tobesedated said:
@nkk71 for the win...the kernel was going to be my next suggestion. After doing some googling lol
Hope it works. If anyone can helps its nkk71
Click to expand...
Click to collapse
It worked with a custom ROM. Didn't even need to do it on Ubuntu, it worked on winxp. Thanks

tmckenn2 said:
I just picked up a new ONE after returning it for the camera colors in dark light (had it for 3-4 months HBOOT 1.44)
this new one is on HBOOT 1.55 to use rumrunner I had to:
1) HTC DEV unlock
2) flash custom recovery
3) install CM 10.2 (the final release works best CM 11 did not work)
4) flash SU zip
5) run rumrunner
With this process it had to pour less than with hboot 1.44 and cm 10.2. went pretty quickly if you have done it before. But the kernel is almost definitely the problem.
have faith it can be done
Click to expand...
Click to collapse
That was the solution. I'm now S-Off. Thanks.

Bradlees said:
Success! First try it worked after flashing the ARHD ROM on windows xp pc. Thanks.
Click to expand...
Click to collapse
Congrats, good to hear
can you edit main thread title to include [SOLVED] so others can refer to it too. thanks

Bradlees said:
It worked with a custom ROM. Didn't even need to do it on Ubuntu, it worked on winxp. Thanks
Click to expand...
Click to collapse
That's great... Isn't it awesome how so many people are willing to help someone out?
Sent from my LG-D803 using xda app-developers app

[Q] Need help! Failed back to stock

Hay guys,
I tried to go back to go back to stock with my HTC ONE.
CID: HTC__102 2.24.401.8
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I relocked it and tried to use a RUU.exe and .zip but both didnt work. Getting errors like "12 signature verify fail"
I flashed a firmware, but the only thing is that the htc logo is shown and it ends in a bootloop (guess because no system is on the phone)
my S-ON is active, do i have to turn it to S-OFF? How can I do it if I can only enter the fastboot mode (adb doesnt work).

Teostra21 said:
Hay guys,
I tried to go back to go back to stock with my HTC ONE.
CID: HTC__102 2.24.401.8
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I relocked it and tried to use a RUU.exe and .zip but both didnt work. Getting errors like "12 signature verify fail"
I flashed a firmware, but the only thing is that the htc logo is shown and it ends in a bootloop (guess because no system is on the phone)
my S-ON is active, do i have to turn it to S-OFF? How can I do it if I can only enter the fastboot mode (adb doesnt work).
Click to expand...
Click to collapse
You have to flash the firmware.zip file first if you haven't flashed it.
It contains new bootloader stock recovery and radio and etc. Find appropriate firmware of your model then use ruu it will work.
Sent from my HTC One using XDA Premium 4 mobile app

kartik.kayz said:
You have to flash the firmware.zip file first if you haven't flashed it.
It contains new bootloader stock recovery and radio and etc. Find appropriate firmware of your model then use ruu it will work.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
flashed a new firmware succsesfully but it didnt work at all
I unlocked my phone.
flashed a TWRP on and I can use it now, how can I install a new system now?

Teostra21 said:
flashed a new firmware succsesfully but it didnt work at all
I unlocked my phone.
flashed a TWRP on and I can use it now, how can I install a new system now?
Click to expand...
Click to collapse
What was the RUU you were trying to flash (version number)? Was it a signed RUU or a decrypted RUU?
Are you trying to go back to stock for warranty purpose?

alray said:
What was the RUU you were trying to flash (version number)? Was it a signed RUU or a decrypted RUU?
Are you trying to go back to stock for warranty purpose?
Click to expand...
Click to collapse
I tried different ones. Anyways I rooted it back and installed ViperOne and I will stick with it.
Do you maybe have an idea what is this N symbol in the status bar of viperone 6.1? and how i can turn it off?
thanks for the help

Teostra21 said:
I tried different ones. Anyways I rooted it back and installed ViperOne and I will stick with it.
Do you maybe have an idea what is this N symbol in the status bar of viperone 6.1? and how i can turn it off?
thanks for the help
Click to expand...
Click to collapse
its the NFC icon, you can remove it either by turning NFC off or using the Xposed framework with the NfcIconRemover module

[Q] How do I go from Viper Rom back back to stock to sell phone?

I have a HTC one with Viper Rom I want to go back to 100% stock to sell. I started this process days ago and I think my first step was to lock the bootloader then try to find an RUU to run. That look about 3 days off my life with bootloops until I locked the bootloader again and now have my phone back.
Here are my specs I think the experts will need- can the helpful community here help me get back to stock and direct me what steps to use?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.0515
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 99000146603692
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4231mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

cfclay said:
I have a HTC one with Viper Rom I want to go back to 100% stock to sell. I started this process days ago and I think my first step was to lock the bootloader then try to find an RUU to run. That look about 3 days off my life with bootloops until I locked the bootloader again and now have my phone back.
Here are my specs I think the experts will need- can the helpful community here help me get back to stock and direct me what steps to use?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.0515
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34JS902192
(bootloader) imei: 990001466036928
(bootloader) meid: 99000146603692
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4231mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Try this RUU
https://www.androidfilehost.com/?fid=23329332407573774

Thanks, I'm pretty sure I already tried that, but maybe I did the wrong steps or wrong order.
Do I just run that RUU ....no relock or anything else first?
Sent from my HTCONE using XDA Free mobile app

cfclay said:
Thanks, I'm pretty sure I already tried that, but maybe I did the wrong steps or wrong order.
Do I just run that RUU ....no relock or anything else first?
Sent from my HTCONE using XDA Free mobile app
Click to expand...
Click to collapse
You can find the instructions for running the RUU here. But here is a more current RUU which I think will match your hboot 1.57. Follow the instructions in the OP.

Thanks, as I recall I tried exactly those steps and that is how I ended up in a boot loop.
Specifically when I ran the RUU it would complete maybe steps 1 of 5 and I would get an error and the program would stop with error 'htc fastboot.exe has stopped working "
Pretty much no method I tried worked until I relocked the boot loader and voila the phone booted finally.
Notice I have higher boot loop version. Does that matter?
Sent from my HTCONE using XDA Free mobile app

cfclay said:
Thanks, as I recall I tried exactly those steps and that is how I ended up in a boot loop.
Specifically when I ran the RUU it would complete maybe steps 1 of 5 and I would get an error and the program would stop with error 'htc fastboot.exe has stopped working "
Pretty much no method I tried worked until I relocked the boot loader and voila the phone booted finally.
Notice I have higher boot loop version. Does that matter?
Sent from my HTCONE using XDA Free mobile app
Click to expand...
Click to collapse
Please remove from your first post your imei and serialno.
You have a higher hboot, and I think you tried to run a RUU of a lower hboot. Since, you are S-ON you can only run RUU with the same or higher hboot, the same or higher OS/version and the CID & MID must match. If these are not met, it will fail. And the bootloader must be LOCKED or RELOCKED.

majmoz said:
Please remove from your first post your imei and serialno.
You have a higher hboot, and I think you tried to run a RUU of a lower hboot. Since, you are S-ON you can only run RUU with the same or higher hboot, the same or higher OS/version and the CID & MID must match. If these are not met, it will fail. And the bootloader must be LOCKED or RELOCKED.
Click to expand...
Click to collapse
THANK YOU! Another customer serviced. Every issue I encountered I tried to search the answer, and I never found that RUU I guess. You are lifesaver!

[Q] reverting to stock rom m7

Hello. After trying to get my htc one back to stock rom for the list two weeks i am about to give up. it is a pn071000, with cid htc_y13, and the hboot is 1.57.
i have tried with ruu files, but without any sucess. With guru reset 3.62.401 i am able to get it up and working, but only until i try the ota update that it downloads (4.19.401.11). It reboots and installs, and when done it reboots again, but then the screen flickers a second in blue, then pink, and it returns to the htc logo boot scren an stays there.
Has any of you experienced the same, and found a sollution?
best regards Lars

gaustabl said:
Hello. After trying to get my htc one back to stock rom for the list two weeks i am about to give up. it is a pn071000, with cid htc_y13, and the hboot is 1.57.
i have tried with ruu files, but without any sucess. With guru reset 3.62.401 i am able to get it up and working, but only until i try the ota update that it downloads (4.19.401.11). It reboots and installs, and when done it reboots again, but then the screen flickers a second in blue, then pink, and it returns to the htc logo boot scren an stays there.
Has any of you experienced the same, and found a sollution?
best regards Lars
Click to expand...
Click to collapse
I guess your phone is s-on, you can't downgrade firmware with s-on which is what your trying to do.
Hboot 1.57 suggests your on 5.xx or 6.xx firmware so you can't install a 4.xx firmware.
Please can you post the output from
Code:
fastboot getvar all
please Edit out your serial and imei numbers before posting.
We should be able to find something that will work for you.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Danny201281 said:
I guess your phone is s-on, you can't downgrade firmware with s-on which is what your trying to do.
Hboot 1.57 suggests your on 5.xx or 6.xx firmware so you can't install a 4.xx firmware.
Please can you post the output from
Code:
fastboot getvar all
please Edit out your serial and imei numbers before posting.
We should be able to find something that will work for you.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Click to expand...
Click to collapse
hello:
here it is;
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4047mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
hope you can help me,
best regards Lars

gaustabl said:
hello:
here it is;
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4047mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
hope you can help me,
best regards Lars
Click to expand...
Click to collapse
Well it's difficult to say exactly as your version main is missing. But you can flash this Rom with your custom recovery. https://www.androidfilehost.com/?fid=23501681358543706
It will revert you to stock Rom and recovery. You should be able to Install the last ota for 4.4.3 since your firmware will still be the same version even if your already on 6.xx
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Thank you ! that worked fantastic.
best regards Lars

gaustabl said:
Thank you ! that worked fantastic.
best regards Lars
Click to expand...
Click to collapse
Glad I was able to help
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

[Q] Stuck, Unlocked, S-On, 1.57

Hi,
so, i've been kind of screwing my m7 up lately and managed to get to an older system update (sorry, must have been 4.2.2 but i'm not sure) by using GuruReset. Now, i just stayed with it, until today, i had this weird need to update my phone. So i did the Official update by Vodafone giving me Sense 5.5, everything installed, but now im in a bootloop.
This is what my recovery mode says.
Tampered
Unlocked
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4A.17.3250.14
OpenDSP-v32.120.274.0909​
I could easily flash gurureset again right now and go back to said old firmware, but is there any way of going to lollipop right now?
What may be important is that my M7 is Vodafone Germany.

ElRoja said:
Hi,
so, i've been kind of screwing my m7 up lately and managed to get to an older system update (sorry, must have been 4.2.2 but i'm not sure) by using GuruReset. Now, i just stayed with it, until today, i had this weird need to update my phone. So i did the Official update by Vodafone giving me Sense 5.5, everything installed, but now im in a bootloop.
This is what my recovery mode says.
Tampered
Unlocked
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4A.17.3250.14
OpenDSP-v32.120.274.0909​
I could easily flash gurureset again right now and go back to said old firmware, but is there any way of going to lollipop right now?
What may be important is that my M7 is Vodafone Germany.
Click to expand...
Click to collapse
post the output of "fastboot getvar all"
remove imei and serialno before posting

alray said:
post the output of "fastboot getvar all"
remove imei and serialno before posting
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4273mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

ElRoja said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4273mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
do you remember if your phone was 6.12.161.5 or 6.12.161.9 ?

alray said:
do you remember if your phone was 6.12.161.5 or 6.12.161.9 ?
Click to expand...
Click to collapse
No idea.. Is there any way i could find out?

ElRoja said:
No idea.. Is there any way i could find out?
Click to expand...
Click to collapse
try to restore using this backup, do not flash the firmware only restore the backup using twrp https://www.androidfilehost.com/?fid=95916177934522314

I'm trying to but i can't find the backup in my restore list for some reason.. Sorry :/

ElRoja said:
I'm trying to but i can't find the backup in my restore list for some reason.. Sorry :/
Click to expand...
Click to collapse
you have to put the nandroid in the folder TWRP/Backups/your-phone-serialno/put nandroid here

clsA said:
you have to put the nandroid in the folder TWRP/Backups/your-phone-serialno/put nandroid here
Click to expand...
Click to collapse
Awesome, thank you. Restoring now, will update
I'm on 4.4.2 and Sense 6.0 now, which is great, thanks! How do i get to lollipop now?

ElRoja said:
Awesome, thank you. Restoring now, will update
I'm on 4.4.2 and Sense 6.0 now, which is great, thanks! How do i get to lollipop now?
Click to expand...
Click to collapse
you need stock recovery - then just take the OTA updates

clsA said:
you need stock recovery - then just take the OTA updates
Click to expand...
Click to collapse
Can't thank you enough, this whole place is sweet! Finally got it to work