Database Develop

[Q] HELP! Battery died while flashing CM11 update

Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!

Raidorz said:
Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!
Click to expand...
Click to collapse
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?

clsA said:
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If I'm not wrong it's CWM 6.0.4.3. And I downloaded the RUU based on my region before.
Sorry I'm still new about using forums!

Raidorz said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Remove Me
(bootloader) imei: Remove Me
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Sorry I'm still new about using forums!
Click to expand...
Click to collapse
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082

clsA said:
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.

Raidorz said:
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.
Click to expand...
Click to collapse
Try this for s-off >> http://firewater-soff.com/

clsA said:
Try this for s-off >> http://firewater-soff.com/
Click to expand...
Click to collapse
Problem is I cant boot into android

Raidorz said:
Problem is I cant boot into android
Click to expand...
Click to collapse
sideload a rom like ARHD 31.6 and try

[Q] Failed rom install now boot loop?

***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-V32.120.274.0909
os-3.62.401.1
eMMC-boot 2048MB
oct 17 2013, 23:06: 14.0
I wanted to Root the phone so did everything I was asked and added RomManager.
Tried to install : One_4.06.1540.2_odexed and now ended up in boot loop as I get failed with error code 7.
I downloaded RUU_M7_UL_K44_SENSE55_MR_BrightstarUS_WWE_4.19.1540.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_353887_signed_3
This gets to reboot phone to HTC logo then I get an error saying incorrect rom.
Can someone help me please as ive been reading all afternoon but not sure what to look for.
Cheers
Nick

Post a fastboot getvar all and a bootloader screen shot please
Sent from my Nexus 7 using XDA Premium HD app

bored_stupid said:
Post a fastboot getvar all and a bootloader screen shot please
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
C:\mini-sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3ADW901364
(bootloader) imei: 359**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3865mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Not sure how to screen shot but it is as per first post.

jarrnick said:
I downloaded RUU_M7_UL_K44_SENSE55_MR_BrightstarUS_WWE_4.19.1540.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_353887_signed_3
This gets to reboot phone to HTC logo then I get an error saying incorrect rom.
Click to expand...
Click to collapse
you tried to back to stock/latest ROM, your CID HTC__001 and MID PN0710000
i think you need to install World Wide English 4.19.401.9 ROM if you really need to back to stock, give it try, then search for OTA updates (Sittings>About>software update) to get 4.19.401.11 latest
be sure your bootloader is LOCKED or RE-LOCKED
this is my suggest , or you can wait for developers

jarrnick said:
C:\mini-sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3ADW901364
(bootloader) imei: 359**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3865mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Not sure how to screen shot but it is as per first post.
Click to expand...
Click to collapse
Why are you trying to install a Brightstar rom and RUU,
You have the international M7_ul
You can use 3.62.401.1 guru reset rom from here
http://www.htc1guru.com/downloads/stock-rom-downloads/
Or you can install a custom rom such as ARHD
Make sure you have TWRP 2.6.3.3 or better installed
You cannot install a RUU that is not meant for your phone with S-On. It has to be same version or higher.
Sent from my Nexus 7 using XDA Premium HD app

gailyea muskets
bored_stupid said:
Why are you trying to install a Brightstar rom and RUU,
You have the international M7_ul
You can use 3.62.401.1 guru reset rom from here
Or you can install a custom rom such as ARHD
Make sure you have TWRP 2.6.3.3 or better installed
You cannot install a RUU that is not meant for your phone with S-On. It has to be same version or higher.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I am downloading ARHD but How do I get the file on to my device and it mentions a virtual memory card but I have no way of booting phone past bootloader or recovery.
Cheers

jarrnick said:
I am downloading ARHD but How do I get the file on to my device and it mentions a virtual memory card but I have no way of booting phone past bootloader or recovery.
Cheers
Click to expand...
Click to collapse
you can just copy it from your pc when you boot your device or boot into fastboot and use adb
http://android-revolution-hd.blogspot.com/2013/12/how-to-copy-rom-zip.html

Following the instructions I have managed to get the ARHD rom installed and running. Would it be simple to revert back to a stock rom or is that going to cause more problems.
Cheers
Nick

jarrnick said:
Following the instructions I have managed to get the ARHD rom installed and running. Would it be simple to revert back to a stock rom or is that going to cause more problems.
Cheers
Nick
Click to expand...
Click to collapse
It's fairly simple but more people get into trouble trying to return to stock than trying to root their phones.
Follow this guide precisely in the correct order.
http://forum.xda-developers.com/showthread.php?t=2541082
Providing your on the 3.62.401.1 still.
Here is the guru reset for it.. read the guide carefully
http://www.htc1guru.com/2013/10/guru-reset-3-62-401-1-stock-rom/
Sent from my HTC One using Xparent Skyblue Tapatalk 2

[Q] need help getting s-off to get to stock, version-main empty

Hello,
As the title already states i a m looking for a way to get S-off so i can change the CID to a more general one and to go back to stock.
I tried several things like firewater, Rumrunner but all with no luck.
Maybe i am missing something or its because i am on bootloader 1.55, but i need some guidance, if its even possible with my phone.
The strange thing here is that the "version-main" information is empty...... maybe that can cause a problem?
I tried to change the version-main with the "echo "2.24.111.3 " | dd of=/dev/block/mmcblk0p19 bs=1 seek=160" command and restored the "M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3" backup i downloaded from htc1guru.com and the phone startsup and seems to work great i even recieved an update.
Her some info:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If a second HTC one can help with this, i have one extra who is not rooted and still stock.
I post the getvar informtion from that phone as well, maybe i can use this phone to bring the first phone on stock.
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4063mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So if someone can help me with this challenge i would be very thankfull

francisb said:
Hello,
As the title already states i a m looking for a way to get S-off so i can change the CID to a more general one and to go back to stock.
I tried several things like firewater, Rumrunner but all with no luck.
Maybe i am missing something or its because i am on bootloader 1.55, but i need some guidance, if its even possible with my phone.
The strange thing here is that the "version-main" information is empty...... maybe that can cause a problem?
I tried to change the version-main with the "echo "2.24.111.3 " | dd of=/dev/block/mmcblk0p19 bs=1 seek=160" command and restored the "M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3" backup i downloaded from htc1guru.com and the phone startsup and seems to work great i even recieved an update.
Her some info:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If a second HTC one can help with this, i have one extra who is not rooted and still stock.
I post the getvar informtion from that phone as well, maybe i can use this phone to bring the first phone on stock.
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4063mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So if someone can help me with this challenge i would be very thankfull
Click to expand...
Click to collapse
You can try firewater with various combinations of ROMs and kernels. Some have had success with ARHD and Bulletproof kernel. Should that fail, there is Sunshine S-OFF but it will cost a fee ($25).

francisb said:
Hello,
As the title already states i a m looking for a way to get S-off so i can change the CID to a more general one and to go back to stock.
I tried several things like firewater, Rumrunner but all with no luck.
Maybe i am missing something or its because i am on bootloader 1.55, but i need some guidance, if its even possible with my phone.
The strange thing here is that the "version-main" information is empty...... maybe that can cause a problem?
I tried to change the version-main with the "echo "2.24.111.3 " | dd of=/dev/block/mmcblk0p19 bs=1 seek=160" command and restored the "M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3" backup i downloaded from htc1guru.com and the phone startsup and seems to work great i even recieved an update.
Her some info:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If a second HTC one can help with this, i have one extra who is not rooted and still stock.
I post the getvar informtion from that phone as well, maybe i can use this phone to bring the first phone on stock.
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4063mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So if someone can help me with this challenge i would be very thankfull
Click to expand...
Click to collapse
What errors did you get with firwater and rumrunner?
Your version main was/is blank because you've used a version of TWRP recovery that has the misc partition bug. It is only a cosmetic bug though and doubt it has any effect on the s-off process.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

majmoz said:
You can try firewater with various combinations of ROMs and kernels. Some have had success with ARHD and Bulletproof kernel. Should that fail, there is Sunshine S-OFF but it will cost a fee ($25).
Click to expand...
Click to collapse
Do you know wich ARHD version and Bulletproof kernel version?

Danny201281 said:
What errors did you get with firwater and rumrunner?
Click to expand...
Click to collapse
Rumrunner stops at pour 8 and tels to reboot and try again, i tried several times.
Firewater says firewater can not work on your device....
I am going to upgrade TWRP to solve the version-main bug...

Danny201281 said:
Your version main was/is blank because you've used a version of TWRP recovery that has the misc partition bug. It is only a cosmetic bug though and doubt it has any effect on the s-off process.
Click to expand...
Click to collapse
updated TWRP but still an empty version-main...

francisb said:
updated TWRP but still an empty version-main...
Click to expand...
Click to collapse
Version-main will remain empty until you flash another firmware package. As Danny201281 stated it is cosmetic. Did you update to TWRP 2.6.3.3?
---------- Post added at 07:33 AM ---------- Previous post was at 07:30 AM ----------
francisb said:
Do you know wich ARHD version and Bulletproof kernel version?
Click to expand...
Click to collapse
Use ARHD 53.0 or 62.0 and the current Bulletproof kernel. I would try ARHD with the stock kernel first before trying the Bulletproof kernel.
I would keep this site for future reference it has nandroid backups, OTA and recoveries of your version.

majmoz said:
Version-main will remain empty until you flash another firmware package. As Danny201281 stated it is cosmetic. Did you update to TWRP 2.6.3.3?
Click to expand...
Click to collapse
i updated to 2.8.1.0.

francisb said:
i updated to 2.8.1.0.
Click to expand...
Click to collapse
It's best to use 2.6.3.3 with ARHD roms. To avoid set_metedata_recursive errors when installing
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Well i installed TWRP 2.6.3.3 and ARHD 53.0. Then tried firewater en Rumrunner but no joy.
After that i looked at Bulletproof kernel but it seems s-off is needed to install that kernel.
Version-main is still empty...
So what can i do more?

francisb said:
Well i installed TWRP 2.6.3.3 and ARHD 53.0. Then tried firewater en Rumrunner but no joy.
After that i looked at Bulletproof kernel but it seems s-off is needed to install that kernel.
Version-main is still empty...
So what can i do more?
Click to expand...
Click to collapse
You need Bulletproof 14.1 to go with ARHD 53 and the kernel does not require s-off

majmoz said:
You can try firewater with various combinations of ROMs and kernels. Some have had success with ARHD and Bulletproof kernel. Should that fail, there is Sunshine S-OFF but it will cost a fee ($25).
Click to expand...
Click to collapse
Ok finally S-off by using Sunshine, changed CID to HTC__001
Thanks for all the help.

Now i am on os-5.11.1540.9 HBOOT-1.57m by flashing a RUU zip (WWE) for the correct CID and MID but.....
It downloads an OTA update but says; we have determined that your phone may be running a modified version of its system software.
Is this because i am still S-off?

francisb said:
Now i am on os-5.11.1540.9 HBOOT-1.57m by flashing a RUU zip (WWE) for the correct CID and MID but.....
It downloads an OTA update but says; we have determined that your phone may be running a modified version of its system software.
Is this because i am still S-off?
Click to expand...
Click to collapse
No ...STAY S-OFF no matter what
Your CID and Software are incorrect, 5.11.1540.9 is Developer Edition
HTC__001 is International .... What RUU did you use, and what did you do between flashing the RUU and getting the Update

clsA said:
No ...STAY S-OFF no matter what
Your CID and Software are incorrect, 5.11.1540.9 is Developer Edition
HTC__001 is International .... What RUU did you use, and what did you do between flashing the RUU and getting the Update
Click to expand...
Click to collapse
Wel i figured that something was wrong with the software. I installed a gurureset version and followed his instructions, did not go back S-on and OTA worked like a charm.
Thanks for all the help guys, together with your information i figure it out at the end.
Francis

Getting an error trying to install latest RUU.

I'm rooted/s-off and trying to install the latest Sprint RUU, but run into an error. It happens on the black screen with the HTC logo, right after the RUU boots up the bootloader.
Any ideas on how to rectify this?
Also, is the latest fw able to be rooted, just in case I don't like it I can restore the backup I made?
Sent from my HTC One using XDA Premium 4 mobile app.

johnequickiii said:
I'm rooted/s-off and trying to install the latest Sprint RUU, but run into an error. It happens on the black screen with the HTC logo, right after the RUU boots up the bootloader.
Any ideas on how to rectify this?
Also, is the latest fw able to be rooted, just in case I don't like it I can restore the backup I made?
Sent from my HTC One using XDA Premium 4 mobile app.
Click to expand...
Click to collapse
Do you have more info on the bootloader?
Also, just for reference, can we see your fastboot getvar all ?
Remove IMEI, serial No and MEID.
To answer your second questions, yes. I am running the latest firmware with no root issues.

I totally forgot to mention that it was supposed to be the progress bar screen that's black with the HTC logo in the middle.
I'll be back with a getvar later on probably.
Sent from my HTC One using XDA Premium 4 mobile app.

johnequickiii said:
I totally forgot to mention that it was supposed to be the progress bar screen that's black with the HTC logo in the middle.
I'll be back with a getvar later on probably.
Sent from my HTC One using XDA Premium 4 mobile app.
Click to expand...
Click to collapse
What does that mean? Can I see a video or pics?

Better yet, the getvar.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.01.20.0904_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ************
(bootloader) imei: ***************
(bootloader) meid: **************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4167mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

johnequickiii said:
Better yet, the getvar.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.01.20.0904_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ************
(bootloader) imei: ***************
(bootloader) meid: **************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4167mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Getvar looks normal
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.0904_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.05.651.2
(bootloader) version-misc: PVT SHIP S-ON <<note that this is actually S-OFF, I have a custom HBOOT
(bootloader) serialno: ****
(bootloader) imei: ****
(bootloader) meid: ****
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3748mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So now that we know there's nothing really wrong with your firmware, what exactly is the problem?
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
Where, relative to these commands is the error happening?
Also remember to quote, or else I don't get notifs.

johnequickiii said:
Better yet, the getvar.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.01.20.0904_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ************
(bootloader) imei: ***************
(bootloader) meid: **************
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4167mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I have noticed the latest RUU's will not run properly (M7 and M8) if the hboot does not match. The latest hboot for the M7 is 1.57.
You may have to flash the latest Full Firmware to update your hboot then run the RUU.

sauprankul said:
Getvar looks normal
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.0904_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.05.651.2
(bootloader) version-misc: PVT SHIP S-ON <<note that this is actually S-OFF, I have a custom HBOOT
(bootloader) serialno: ****
(bootloader) imei: ****
(bootloader) meid: ****
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3748mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So now that we know there's nothing really wrong with your firmware, what exactly is the problem?
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
Where, relative to these commands is the error happening?
Also remember to quote, or else I don't get notifs.
Click to expand...
Click to collapse
I attempt to run the RUU straight from my desktop.
What happens is the phone does it's initial restart into RUU mode in the bootloader, then the very next screen is the HTC logo on a black screen, which is seemingly supposed to have a progress bar right under the logo. Right there is where the error is thrown.
The RUU program suggests I unplug the phone, which I do, and it's just the bootloader screen with only RUU the only highlightable option. From there, I have to hard reset the phone and I'm back to the start, which is my phone as usual, so it doesn't seem like it ever gets to copy a file or format anything.

johnequickiii said:
I attempt to run the RUU straight from my desktop.
What happens is the phone does it's initial restart into RUU mode in the bootloader, then the very next screen is the HTC logo on a black screen, which is seemingly supposed to have a progress bar right under the logo. Right there is where the error is thrown.
The RUU program suggests I unplug the phone, which I do, and it's just the bootloader screen with only RUU the only highlightable option. From there, I have to hard reset the phone and I'm back to the start, which is my phone as usual, so it doesn't seem like it ever gets to copy a file or format anything.
Click to expand...
Click to collapse
So what's the exact error message? And no, the progress bar only appears after you issue the flash command.
Also, what OS are you using?

BD619 said:
I have noticed the latest RUU's will not run properly (M7 and M8) if the hboot does not match. The latest hboot for the M7 is 1.57.
You may have to flash the latest Full Firmware to update your hboot then run the RUU.
Click to expand...
Click to collapse
What's the latest full one? I'll grab that and give it a shot.
The only reason I'm trying to update now is because I have this issue that seems to kill my battery within 3-4 hours, and I can't figure out why. I thought I'd give a full update a try to see whether it's my phone or something in my setup doing it.
Stock 3.05.651.6, but when I did it I had to start with the very first fw the phone had and take each ota til I was where I am now. That was a long time ago, and this issue only started a week or two ago at most.
Any potential ideas in that realm would be super appreciated.

johnequickiii said:
What's the latest full one? I'll grab that and give it a shot.
The only reason I'm trying to update now is because I have this issue that seems to kill my battery within 3-4 hours, and I can't figure out why. I thought I'd give a full update a try to see whether it's my phone or something in my setup doing it.
Stock 3.05.651.6, but when I did it I had to start with the very first fw the phone had and take each ota til I was where I am now. That was a long time ago, and this issue only started a week or two ago at most.
Any potential ideas in that realm would be super appreciated.
Click to expand...
Click to collapse
5.05.651.2 is the latest

BD619 said:
5.05.651.2 is the latest
Click to expand...
Click to collapse
I probably should've mentioned this in the first post, but that's the RUU I'm trying to use.
I meant to ask which was the first one with the updated bootloader.

@BD619 should he try to flash each partition individually via fastboot?

johnequickiii said:
I probably should've mentioned this in the first post, but that's the RUU I'm trying to use.
I meant to ask which was the first one with the updated bootloader.
Click to expand...
Click to collapse
Flash the 5.05.651.2 Full Firmware then flash the 5.05.651.2 RUU
sauprankul said:
@BD619 should he try to flash each partition individually via fastboot?
Click to expand...
Click to collapse
Nah that would be a PITA lol.

BD619 said:
Flash the 5.05.651.2 Full Firmware then flash the 5.05.651.2 RUU
Click to expand...
Click to collapse
Where would I find the full one? I got the RUU from HTC.

johnequickiii said:
Where would I find the full one? I got the RUU from HTC.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2795856

BD619 said:
Flash the 5.05.651.2 Full Firmware then flash the 5.05.651.2 RUU
Click to expand...
Click to collapse
Now I'm confused. Is there a difference between flashing the firmware and flashing the RUU?
which one is this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
?

sauprankul said:
Now I'm confused. Is there a difference between flashing the firmware and flashing the RUU?
which one is this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
?
Click to expand...
Click to collapse
The firmware will update hboot,radio, ect.
The RUU will update the firmware aswell as the OS.

Got this trying to update with the full firmware.
Sorry about the crappy pic quality. Sensor blew long ago.
Sent from my HTC One using XDA Premium 4 mobile app.

johnequickiii said:
Got this trying to update with the full firmware.
Sorry about the crappy pic quality. Sensor blew long ago.
Sent from my HTC One using XDA Premium 4 mobile app.
Click to expand...
Click to collapse
Make sure it's in the folder you are using to open the cmd window.
Make sure it names firmware.zip not firmware.zip.zip

Looking for correct RUU.exe

Hello all XDA members,
I am looking for the correct RUU.exe for my HTC One M7. Its on Vodafone UK (VODAP001) and HBOOT 1.61.000 and is S-On. I have already relocked the bootloader and flashed the stock recovery back. I have found and tried many RUU.zip from here and HTC but I have learned that as I am S-on I am unable to go this route. This HTC One m7 was running a custom ROM and TWRP but since I am giving it my Father I needed it back to stock and ready to receive any OTA updates that Vodafone throw out.
Thank you all
Andrew

worf105 said:
Hello all XDA members,
I am looking for the correct RUU.exe for my HTC One M7. Its on Vodafone UK (VODAP001) and HBOOT 1.61.000 and is S-On. I have already relocked the bootloader and flashed the stock recovery back. I have found and tried many RUU.zip from here and HTC but I have learned that as I am S-on I am unable to go this route. This HTC One m7 was running a custom ROM and TWRP but since I am giving it my Father I needed it back to stock and ready to receive any OTA updates that Vodafone throw out.
Thank you all
Andrew
Click to expand...
Click to collapse
Can you please post the output of "fastboot getvar all" (hide your imei and sn before posting)
Will be easier to point you the correct RUU.
Btw is KatKiss 5.1 working fine? Haven't played with my tf101 for a while!

Thank you for your quick reply and as requested here is the output to fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.161.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Sxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4154mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-92aee636
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kind Regards,
Andrew

Btw is KatKiss 5.1 working fine? Haven't played with my tf101 for a while!
Click to expand...
Click to collapse
Yes Lollipop 5.1 is working great and I have had no problems. Hopefully TimDuru will be presenting Marshmallow soon for the TF101

worf105 said:
Thank you for your quick reply and as requested here is the output to fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.161.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Sxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4154mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-92aee636
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kind Regards,
Andrew
Click to expand...
Click to collapse
The latest RUU for that version is 7.18.161.21. Since your phone is S-ON you can only flash RUU that are the same version or higher than your actual version (7.18.161.30). There is a way to bypass this. Go to this thread and read at the end of my post (post #2) under "how to downgrade with s-on". Once done and your version-main is showing 7.18.161.2 instead of 7.18.161.30 , flash the 7.18.161.21 RUU using instructions of post #1 (RUU file is at post #2). Don't forget to use the fastboot version provided at post #1, the normal fastboot version won't work to flash a lollipop RUU.
worf105 said:
Yes Lollipop 5.1 is working great and I have had no problems. Hopefully TimDuru will be presenting Marshmallow soon for the TF101
Click to expand...
Click to collapse
Its amazing how this dev is still supporting this device, will try to update :good:

Thank you alray
Will let you know how I get on with your instructions.
Ye TimDuru has done a great job in supporting the TF101. If he never I would have bought another tablet years ago.
Kindest Regards,
Andrew

I worked a treat, thank you alray for your expert help in this matter.
Gratefully yours,
Andrew

worf105 said:
I worked a treat, thank you alray for your expert help in this matter.
Gratefully yours,
Andrew
Click to expand...
Click to collapse
You're welcome :good:

alray said:
The latest RUU for that version is 7.18.161.21. Since your phone is S-ON you can only flash RUU that are the same version or higher than your actual version (7.18.161.30). There is a way to bypass this. Go to this thread and read at the end of my post (post #2) under "how to downgrade with s-on". Once done and your version-main is showing 7.18.161.2 instead of 7.18.161.30 , flash the 7.18.161.21 RUU using instructions of post #1 (RUU file is at post #2). Don't forget to use the fastboot version provided at post #1, the normal fastboot version won't work to flash a lollipop RUU.
Its amazing how this dev is still supporting this device, will try to update :good:
Click to expand...
Click to collapse
hi do you can helme whith my HTC wls RUU :crying:

jhon8500 said:
hi do you can helme whith my HTC wls RUU :crying:
Click to expand...
Click to collapse
Yes, what is the problem?

alray said:
Yes, what is the problem?
Click to expand...
Click to collapse
okay thanks for replying I have a htc one m7 wls I tried to install a rom of cyanogen but I could not install it I decided to return my htc to s-on with the intention of reinstalling the rom stock of factory but I could not find it the intetnado install by SDK but I get the error "error: device '(null)' not found" and by means of the installer of the ruu by means of .exe says it is not appropriate if you can help me I would appreciate this,
this information of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33YS901134
(bootloader) imei:xxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

jhon8500 said:
okay thanks for replying I have a htc one m7 wls I tried to install a rom of cyanogen but I could not install it I decided to return my htc to s-on with the intention of reinstalling the rom stock of factory but I could not find it the intetnado install by SDK but I get the error "error: device '(null)' not found" and by means of the installer of the ruu by means of .exe says it is not appropriate if you can help me I would appreciate this,
this information of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33YS901134
(bootloader) imei:xxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Sorry for the delayed answer.
First, going back S-ON wasn't required and it's also a bad move. Having S-OFF can help a lot when troubleshooting your phone. I don't know what cyanogenmod rom version you tried to install (cyanogenmod roms are so old) but are you sure the one you tried was compatible with the M7_WLS variant? This phone variant will only work with custom roms made specifically for this variant and must also be flashed with a custom recovery compatible with WLS . Just saying because this is the most common error made by people having this phone variant.
Now, what ruu version are you trying to install? The one you need is 6.23.651.10 and can be found here:
http://dl3.htc.com/application/RUU_...99.2143463114.1556074529-999987239.1556074529
Don't forget that since you went back S-ON you now must have a locked or re-locked bootloader to install a RUU. It won't install if it's unlocked.
If not already done, you can re-lock your bootloader using fastboot from a command window using this single command:
Code:
fastboot oem lock
then install the RUU