Database Develop

Who can help me?

Hi,
Kies offers me a new Version and I confirmed.
The Update goes wrong and now the can`t start.
I can`t send back to Samsung, i bought he Tab in Hongkong :-(
Samsung Germany says "sorry no!
Can anybody reset my Tab, i will pay for help.
Regads Klaus

Can you get in download mode or recovery? Do you see anything on the screen when you try to turn on the tablet?

Hi
Following Message are displayed:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The Recovery Mode are not work :-(
Regards Klaus

ffbkschulz said:
Hi
Following Message are displayed:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The Recovery Mode are not work :-(
Regards Klaus
Click to expand...
Click to collapse
This is displayed on tablet?
What happens when you hold volume up while turning tablet on? Do you get two icons? The right one is Download mode, if you can enter it then it should be possible to flash stock firmware with Odin. Check the guide in development forum.

Hi
Nothing
Regards Klaus

Did you try volume up and start button at the same time when starting up?

Hi goenig,
yes i do
regards

Go to dowload menu and try to flash stock recovery in your tab..
Here is the stock recovery for p7300/p7310
Start odin, and put the file in pda slot..
See the detail tutorial for flashing with odin herehttp://forum.xda-developers.com/showthread.php?t=1406137

don't worry. samsung devices are really hard to mess up. you just need to go to download mode and flash a stock rom.
you can download any odin rom that is available in the forums.

samsung tab2 10.1 cannot get in recovery mode
goenieg said:
Did you try volume up and start button at the same time when starting up?
Click to expand...
Click to collapse
i bricked my samsung tab2 10.1. the screen shows firmware upgrade encountered as issuee. please select recovery mode in kies and try again. i cannot get into recovery mode by pressing power button+volume up button. the same page loades again which is firmware upgrade encountered...
please help me out as soon as possible..

Which model
Sent from my SAMSUNG-SGH-I727 using xda premium

naveensai said:
i bricked my samsung tab2 10.1.
Click to expand...
Click to collapse
You seen to be in the wrong forum. You are likely to receive better help if you can locate the forum for your device

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

my galaxy mini 2 doesn't work after chainfire 3d

Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.

orome2 said:
Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
Click to expand...
Click to collapse
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...

haridevil99 said:
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
Click to expand...
Click to collapse
i can't open recovery mod. and i can't find stock rom for mini 2. When i prees long power buton my phone doesn't turn off. Still restarting. Please help me guys

Dont worry. Pull battery for 10sec and see if you can enter download mode. check this for your stock rom. This will do for now. You can later search for your region or flash a custom rom.
http://www.samsungroms.com/firmware...00-gingerbread-2-3-6-s6500ailk1-italy-tim-rom
Let me know if it does..

didn't work again. Thank you for your helps but still same problem (sorry for bad English ) I can't reach recovery mod and my phone still restartings on samsung logo. Another solution for that problem? Please help me.

Remove the battery....and put it
Now go to recovery mode....and install a rom.....once I also face this problem
Samsung Galaxy Y-Jellyblast

i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.

orome2 said:
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
Click to expand...
Click to collapse
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..

me too
me too

haridevil99 said:
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
Click to expand...
Click to collapse
i did it. But same problem still. Can i format my phone without recovery mod?

orome2 said:
i did it. But same problem still. Can i format my phone without recovery mod?
Click to expand...
Click to collapse
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.

haridevil99 said:
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
Click to expand...
Click to collapse
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?

orome2 said:
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
Click to expand...
Click to collapse
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1

haridevil99 said:
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
Click to expand...
Click to collapse
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close

orome2 said:
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
Click to expand...
Click to collapse
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html

haridevil99 said:
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
Click to expand...
Click to collapse
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center

orome2 said:
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
Click to expand...
Click to collapse
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..

haridevil99 said:
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
Click to expand...
Click to collapse
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?

orome2 said:
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
Click to expand...
Click to collapse
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.

haridevil99 said:
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
Click to expand...
Click to collapse
ohh. Whatever. I mut go repair. I trierd a lot of ways but didn't work. I bored. Thank you for your helps.

[Q] download mode getting stuck

Hey Guys pls help me....
When i try to access my download mode (for cwm installing) it opens and shows 'downloading..."
and get stuck there. I can't tweak my phone due to it. Please anybody tell me anyway to open download mode finally without getting stuck on 'downloading...'

akash.roy said:
Hey Guys pls help me....
When i try to access my download mode (for cwm installing) it opens and shows 'downloading..."
and get stuck there. I can't tweak my phone due to it. Please anybody tell me anyway to open download mode finally without getting stuck on 'downloading...'
Click to expand...
Click to collapse
Hi There,
Bro You dont neeed to go to Download Mode to install CWM. Download mode is used to Unbrick/Unroot Galaxy Ace To stock using odin. To Install CWM You need to go to Recovery Mode.
In Galaxy Ace you go to Recovery Mode by Holding Home/Back button and Power On Button. And keep them holding until you see the samsung logo on samsung logo leave the Power on but dont leave the Home until it takes you to the Recovery.
If you want to flash a custom recovery see my thread.
Good Luck.

Installing CWM in galaxy ace
Then can you please guide me in installing CWM in my phone. It would be very helpful :good:

akash.roy said:
Then can you please guide me in installing CWM in my phone. It would be very helpful :good:
Click to expand...
Click to collapse
Hi There,
Well The .dock i have provided demonstrates How to Install Any Custom Recovery Using Fastboot. I have used TWRP so u will need to rename the twrp - cwm where needed....if you still face any problem contact me. I will Provide you with another guide...
Happy Flashing..

akash.roy said:
Then can you please guide me in installing CWM in my phone. It would be very helpful :good:
Click to expand...
Click to collapse
ￎWEll u can see this documnt file.

Raakib zargar said:
ￎWEll u can see this documnt file.
Click to expand...
Click to collapse
Or See This.....
How to Easily Install CWMHow to Easily Install CWM
Recovery on Galaxy AceRecovery on Galaxy Ace
S5830S5830
1. Download the CWM recovery file from
here.
2. Save this file on your computer.
3. Then, connect the handset with the
computer by using the USB cord.
4. Now, copy paste or just drag and drop
the file from the computer to your
phone’s SD card.
5. You can now disconnect the phone
from the computer by unplugging the
USB cable.
6. Turn off the Ace.
7. Reboot in recovery: press and hold the
Power and Home buttons.
8. From recovery select “install zip from
SD card” followed by “choose zip from
SD card”.
9. Pick the downloaded file from the SD
card and start the flashing process.
10. Don’t make any other changes.
11. In the end select “+++go back+++” and
“reboot system now”.
Now, you can reboot your device once
more and reach CWM recovery in order to
test the same. Do tell us how things worked
for you and if the CWM recovery image has
been successfully installed on your
Samsung Galaxy Ace smartphone. The best
part is that you can now look forward in
installing a custom ROM firmware on your
device

how to downgrade gti9070 ddupl8 jellybean

When I downgrade my gti9070 from Indian jb to GB then it stuck at Samsung galaxy s advance named logo and no recovery .plz help and give another way to downgrade it.....:crying:

It should boot into recovery or download mode .
Then only it could work , try if any of the below mentioned steps sort it out for you.
1 : batter pull-up and then waiting 1 min then reinserting and REBOOT.
2: try getting into recovery mode if you are successful then just clean cache/dalvic - REBOOT.
2:try getting into download/ODIN mode and then try re-flashing the stock GB from ODIN(use the specific firmware as provided by manufacture it contains kernel and other information related for I9070) HERE ARE THE ORIGINAL FIRMWARES you`ll need a signup on sammobile to download don`t worry it doesn`t take much time but it will come in handy next time
You can try adb sideload booting GB i think its somewhere in thread just search for it .
BUt you`ll need to boot into recovery first for it to work,

i tried but i cant go to recovery mode
I tried but not access to recovery mode
.sammobile have 4 firmwares I confused what to flash .plz guide me

yadav anand said:
I tried but not access to recovery mode
.sammobile have 4 firmwares I confused what to flash .plz guide me
Click to expand...
Click to collapse
well if you can go to download mode , and want to downgrade to GB , flash the last one.
2015-08-10 India pda I9070DDLD4 csc I9070ODDLD4 .

thnx for reply
Iam new here and a little bit knowledge of flashing.bro you say that I have to flash I9070DDLD4 using odin.plz guide me complete odin process.sorry for bad english

yadav anand said:
Iam new here and a little bit knowledge of flashing.bro you say that I have to flash I9070DDLD4 using odin.plz guide me complete odin process.sorry for bad english
Click to expand...
Click to collapse
HERE see this thread
download odin`s latest version just google it ,
and PDA = PA in latest odin .
also check in developer settings are ON then allow android debugging and allow mock locations checked ok.
Hope this helps GOOD LUCK :good:

still stuck at samsung galaxy s advance named logo
Bro it still stuck at galaxy s advance named logo and no recovery

If you have an SD card inserted, power off, remove the card, and power on again. A corrupt card can sometimes cause problems.
Take battery out wait for few minutes then re-insert it and try booting into recovery by holding all three keys simultaneously (VOL UP + HOME + POWER) until you feel sort of vibration ,or repeat the process try getting into download mode by pressing and holding (VOL DOWN + HOME _ POWER ) buttons ... .. i hope your phone is not bricked yet ,
meanwhile wait for other people for their suggestions.
Sent by using XDA-developers premium mobile app

ok I will try this method
Ok I try this method and also waiting for other people suggestions