I had my SM-N900A running fine after i got the update from samsung and lost my kingo root access and it somehow messed up my phone. after playing with the phone a whole lot i can flash kitkat on it. but no matter what i flash or whatever i can not get any type of network. it just weird. i know the csc file supposed to be the network and region operator file. but somehow, someway i can not get any other file for csc except for the MI9. which always failed with that bootloader update that came now. phone is working fine on kitkat it's just that i have no network access. not even the 'ATT' logo won't show up. i went to mobile network under setting and click on it. no success. any help would be appreciated
Can you tell me what your baseband says in the settings menu?
Sent from my SM-N9005 using XDA Premium 4 mobile app
graydiggy said:
Can you tell me what your baseband says in the settings menu?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Actually baseband version say : "unknown"
JayJay2626 said:
Actually baseband version say : "unknown"
Click to expand...
Click to collapse
Here is a picture of my about device
Sorry for the late reply.
Just as I expected, you will need to flash your modem back.
Go here and use the NC2 modem.
http://forum.xda-developers.com/showthread.php?t=2698464
Instructions are in the OP.
Sent from my SM-N9005 using XDA Premium 4 mobile app
I don't really know but I don't think my problem is baseband problem cause I'm running "MLG" rom but when i flash modem/baseband version other than this "mlg" it shows unknown baseband version. Only "MLG" modem is recognized and somehow there's all sort of stuff wrong with this roms/or with my phone. I got that circle sign thingy with the slash in the middle showing I don't have any network at all. Idk... I'm running into all sort of weird stuff with this phone.any full wipe/cleaning with brand new roms or whatever would really help. I just want the phone to make phone calls. Phone is kinda working fine when I flash other modem in it (NC2) (can't make phone call though) but it doesn't recognize the baseband version. Here is another picture with the MLG baseband which it recognized but no network though.
baseband unknown and imei null
JayJay2626 said:
I don't really know but I don't think my problem is baseband problem cause I'm running "MLG" rom but when i flash modem/baseband version other than this "mlg" it shows unknown baseband version. Only "MLG" modem is recognized and somehow there's all sort of stuff wrong with this roms/or with my phone. I got that circle sign thingy with the slash in the middle showing I don't have any network at all. Idk... I'm running into all sort of weird stuff with this phone.any full wipe/cleaning with brand new roms or whatever would really help. I just want the phone to make phone calls. Phone is kinda working fine when I flash other modem in it (NC2) (can't make phone call though) but it doesn't recognize the baseband version. Here is another picture with the MLG baseband which it recognized but no network though.
Click to expand...
Click to collapse
Hi.
I have a same problem too. Did you find solution about baseband and ime.
İf you find help please
JayJay2626 said:
I don't really know but I don't think my problem is baseband problem cause I'm running "MLG" rom but when i flash modem/baseband version other than this "mlg" it shows unknown baseband version. Only "MLG" modem is recognized and somehow there's all sort of stuff wrong with this roms/or with my phone. I got that circle sign thingy with the slash in the middle showing I don't have any network at all. Idk... I'm running into all sort of weird stuff with this phone.any full wipe/cleaning with brand new roms or whatever would really help. I just want the phone to make phone calls. Phone is kinda working fine when I flash other modem in it (NC2) (can't make phone call though) but it doesn't recognize the baseband version. Here is another picture with the MLG baseband which it recognized but no network though.
Click to expand...
Click to collapse
I don't think a csc file is what you need...NC2 is official KitKat, your buildnumber ends with MLG, which means you are on the leaked build of KitKat. Both are 'KitKat', but they're are different firmwares...based on the problems you've described here I think your problems are coming from mixing pieces of MLG and NC2 together. It sounds like you may have some experience with odin from flashing modems, I think the easiest thing to do is to do a full flash to NC2 to clean your system up. This will get rid of the signal issues caused by different modems and you'll have the full NC2 firmware (bootloader, baseband, recovery, etc) for a solid foundation to flash custom roms on
Obligatory warning: once you flash official NC2 you are locked to it and you can NOT downgrade to anything with a lower build number - anything with MLG, MJ5, MI9 is out unless you really really really know what you're doing so definitely read up on that if you're not sure and decide if it's something you want to do.
If it is, it's easy as pie all of the NC2 files you need to flash via Odin are in this thread: http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
If not, I'd still recommend reflashing full firmware...just MLG though
cagodesign said:
Hi.
I have a same problem too. Did you find solution about baseband and ime.
İf you find help please
Click to expand...
Click to collapse
Not sure what you mean by ime, but a clean flash to NC2 fixex pretty much everything!
I am by no means an expert in all this, definitely read all of the warnings that the devs put in their threads!
Hope that helps and you get your Note sorted soon!
has anyone solved this problem?
Related
I've spent the last few days trying to figure this out without any luck. I have GT-S5830D (Canadian Koodo version) on stock firmware TLKI4, unlocked with SpeakOut sim (which operates on Rogers network).
Android Version: 2.3.4
Baseband Version: S5830DTLKI4
Kernel Version: 2.6.35.7-perf-CL568978 [email protected] #1
Build Number: GINGERBREAD.DTLKI4
PDA: S5830DTLKI4
PHONE: S5830DTLKI4
CSC: S5830DTLSKI4
In this stock firmware, I have no issues at all. Everything works fine, can place calls, WIFI, GPS, data all works. If I flash a new rom to the phone, I can see the networks still show up with signal strength showing okay, but the phone will not place calls. Just says Emergency Calls Only.
I've been reading about everything I can about this phone, and I just can't figure out what the problem is. I have flashed the modem with DDKQ7 and I was able to again place calls, however with this modem firmware, the connection was very unstable and would drop frequently.
Is there an issue with directly updating the stock rom to CM7 or CM9 that would cause problems with this baseband? I was under the impression that baseband wasn't really important. Interestingly enough, I have another phone that is the same make and model and is not experiencing this problem. I feel there must be something I am missing, if anyone can shed some light on this, I would appreciate it.
Thank you.
I have a feeling that I may be the only person that has experienced this issue. Continuing to search the internet for other answers, I've discovered that the baseband is the cause of this issue, but I still don't quite understands how it relates. My other phone is on the stock firmware (TLKI4) and is running CM7 without issue, on the same network even.
Do the APN settings have effect on voice calls too? Or is it strictly for data?
Also, I read a post on here that sounded like there was a limit to how many times you can perform a complete flash with Odin? Is that true? I'd love to keep experimenting, but each time to roll back the stock firmware, I need to use Odin and I'm hesitant due to the thought that will eventually brick the phone.
Thanks again.
tried to flash cm7 again??
Yes. I have installed cm-7.2.0-cooper.zip as well as some of the nightly's and still only get emergency calls only. I have another phone, exactly the same setup, and it works without issue. I even tryed GalaxyICS-latest and the same problem.
Now I did install a different modem firmware, and performed the upgrade and I don't have the issue anymore, however I have other issues, dropped service, 3g doesn't work properly, wifi and mobile data won't switch, gps is has extremely long lock time if it locks at all.
Does anyone here have the D version of this phone from Koodo? Which modem firmwares are you using? Anyone specifically using the phone on SpeakOut? Any hints would be helpful because I'm completely at a loss, will just have to keep it stock until I can figure it out.
I had the same problem as you, don't worry though because there is a solution. The Koodo Samsung Galaxy Ace only receives a signal when using the original Koodo baseband. (Basebands have to do with wireless signal, sometimes referred to as modems.) The good thing for you is that you can use any ROM or firmware you like, as long as after installing it you flash the original Koodo baseband (S5830DTLKI4) using Odin. I found a download link for the baseband in this thread: http://forum.xda-developers.com/showthread.php?t=1381595
After downloading, (I'm assuming you know how to use Odin, if not you can find a guide easily) open Odin, and in the "Phone" section browse to the file and select it. (You will have to extract the ZIP) Then press start and wait until it is finished downloading and that should do the trick. If you need any more help post back because I know what a pain it is to try and get this particular phone rooted and install a custom ROM.
ALSO MAKE SURE TO BACKUP IN CLOCKWORK MANAGER BEFORE FLASHING THIS
cause you never know what can happen.
If I flash CM7, it still shows my baseband being the same. It doesn't appear to have been changed. So what I need to do is flash CM7 and then just reflash the baseband with Odin and it should work? Even though the baseband shows the same? I'll give it a shot and let you know how it works out, but does anyone know why this would be required, to have to reflash the baseband even though it was never changed?
Is your current baseband S5830DTLKI4? Because in my experience that's the only way I could get service unless I was on the Koodo stock ROM.
Sent from my GT-S5830 using XDA
Yes, that is the firmware that I'm on. That firmware was installed with the stock rom that the phone came with and I have not changed it. Although I have changed it before, it fixed the issue with getting 'emergency calls only' in CM7 but the service was so flaky it wasn't worth keeping as a solution. If I leave the firmware from stock DTLKI4 and flash CM7 over it, I end up getting stuck with emergency calls only problem.
Is the current official CM7 not compatible with DTLKI4 firmware? Could that be the problem I'm having? I'm still really confused why this isn't working, but I will try to install CM7 again, and then use Odin to flash the DTLKI4 on top to see if the install is causing any issue with it. It doesn't really make sense.
Alright, interestingly enough, I just flashed it again and all is working as expected. I've flashed this phone about 10 times, using the same files and it would not work.
This time however, what I did differently is not root the phone. I've been using the universal_gb_root_v20.zip to root the phone previously, but I found that rooting before installing CM is waste of time as root is enabled in the CM7 rom already.
Also, when I flashed the stock rom with Odin, it usually used selected the KDO CSC automatically, last time I flashed it came up with TLS CSC and had the Telus branding. I don't know if that made any difference. All I know is that it worked and I am able to make calls and use data without any problems.
Thank you Dynamic_Apple, although your recommendation was not required, it did give me the motivation to try again and that was enough to get it working. I've never had so much difficulty modding a phone in my life, especially a model that I have messed with before.
Glad I was able to help, I had just as much trouble getting mine modded too, it makes me jealous of all the generic Galaxy Ace owners, but it's good to know that you can actually get past Koodo's sneaky limitations.
Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app
IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.
I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.
Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.
hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .
INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.
Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet
Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.
Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.
Hi,
Well my device which is S5 mini g800f working fine, since I have changed the firmware which was old like build on july so I tried to installed latest, but now there is emergency call showing, also I have tried manually and automatically to register on the network but it says unable to register to the (---network). I did it coz my device was not showing LTE network. However my sim supports the 4g and was working on S4 i9505. I have searched on Google and look out many threads on XDA but no success until now.
The biggest mistake was I didn't looked the firmware which was already there and was running with 3g support. I have tried these EUR-G800FXXU1ANL1-20141226162921, SER-G800FXXU1ANG1-20140709112536, MAT-G800FXXU1ANI3-20141218172328. Then I have installed Custom Lollipop but no success was there too.
So now any pro's here who can understand my problem ? My imei is showing, is there any procedure where I can put the imei and it will let me know what was installed on stock :crying:
Sorry for being noobish..
Please any buddy give me suggestions that what should I do ? Or should I look in the specific section of XDA forums ?
[email protected] said:
Hi,.....
So now any pro's here who can understand my problem ? My imei is showing, is there any procedure where I can put the imei and it will let me know what was installed on stock :crying:
Sorry for being noobish..
Click to expand...
Click to collapse
What do you mean by this? IMEI showing or Not?
02xda2 said:
What do you mean by this? IMEI showing or Not?
Click to expand...
Click to collapse
Its is mentioned mate what I have written, I said my imei is showing that by dialing *#06# I can see it, because there is a problem where the efs folder corrupted or gone you cant see imei or imei appears to be in these digits 00000 especially by installing custom roms. Anyways my only motive is that I know the imei and how ever I can see it too, so is there any procedure where I can put the imei to the website and see what was installed on stock. Because I dont have the box so I dont know which firmware was there when I installed another rom to get LTE, because it was working properly as I said in my earlier post.
Problem is due the baseband I am pretty sure which is not matching, this is the reason because I cant connect to the network---error msg (Unable to connect).
[email protected] said:
Hi,
Well my device which is S5 mini g800f working fine, since I have changed the firmware which was old like build on july so I tried to installed latest, but now there is emergency call showing, also I have tried manually and automatically to register on the network but it says unable to register to the (---network). I did it coz my device was not showing LTE network. However my sim supports the 4g and was working on S4 i9505. I have searched on Google and look out many threads on XDA but no success until now.
The biggest mistake was I didn't looked the firmware which was already there and was running with 3g support. I have tried these EUR-G800FXXU1ANL1-20141226162921, SER-G800FXXU1ANG1-20140709112536, MAT-G800FXXU1ANI3-20141218172328. Then I have installed Custom Lollipop but no success was there too.
So now any pro's here who can understand my problem ? My imei is showing, is there any procedure where I can put the imei and it will let me know what was installed on stock :crying:
Sorry for being noobish..
Click to expand...
Click to collapse
The baseband firmware is included in the firmware packages that are available on sammobile (.tar.md5 files). If you flash the firmware package with Odin, also the baseband firmware (contained in modem.bin) will be flashed.
If you have problems with a newly flashed stock firmware that were not present with the original firmware it might be because of one of the following reasons:
You flashed the wrong firmware. I don't think that the version name of the original firmware is stored somewhere. Instead check sammobile for the correct one: select the correct phone model and your country. EUR, SER (for Russia), MAT are country codes, choose the correct one for your country, the search function on sammobile will help you with that. You can also try Kies for restoring the firmware. Maybe that is able to determine the correct firmware according to the IMEI or some other information stored on the phone.
Maybe your EFS partition was changed and corrupted. The EFS partition is the partition that contains the IMEI and other information like calibration files that are specific for your device. If any of the files in this partition is damaged, the phone might not behave correctly. If you flash another firmware the EFS partition normally is not changed.
Your hardware is defect.
I guess that you simply flashed the wrong ROM. Otherwise the problem will be hard to fix.
[email protected] said:
...... where I can put the imei to the website and see what was installed on stock. ..........
Click to expand...
Click to collapse
Probably THIS is what you want, hope so
02xda2 said:
Probably THIS is what you want, hope so
Click to expand...
Click to collapse
Thanks but for me its not working... its showing device Nokia 6303i
Hi there,
Mind helping me anyone? I ended up having unknown Baseband and IMEI null during failed lollipop upgrade. I tried flashing back to original stock rom both kitkat and lollipop via ODIN but I still got same issues. I ended up rooting the phone and currently running twrp. I'm just at lost right now on what else to do. I tried the EFS Wipe via sideload that didn't work either. There seems to be a lot of people experiencing this. The phone boots up fine except Unknown baseband and IME null and I'm not getting any network connections.
I'm thinking of putting custom ROM but I"m not sure with one will work. I have SM-N900W8 Canadian version Telus
Please help.
amilayajr said:
Hi there,
Mind helping me anyone? I ended up having unknown Baseband and IMEI null during failed lollipop upgrade. I tried flashing back to original stock rom both kitkat and lollipop via ODIN but I still got same issues. I ended up rooting the phone and currently running twrp. I'm just at lost right now on what else to do. I tried the EFS Wipe via sideload that didn't work either. There seems to be a lot of people experiencing this. The phone boots up fine except Unknown baseband and IME null and I'm not getting any network connections.
I'm thinking of putting custom ROM but I"m not sure with one will work. I have SM-N900W8 Canadian version Telus
Please help.
Click to expand...
Click to collapse
Since you have Sm-N900W8 this one seems like it will work
[ROM] [SM-N900W8] {no name ROM_NF1}[Update 24th June] 4.4.2 Note III for CANADA
http://forum.xda-developers.com/showthread.php?t=2725204
Rooted i747 said:
Since you have Sm-N900W8 this one seems like it will work
[ROM] [SM-N900W8] {no name ROM_NF1}[Update 24th June] 4.4.2 Note III for CANADA
http://forum.xda-developers.com/showthread.php?t=2725204
Click to expand...
Click to collapse
Thanks for the help. I guess by flashing this custom ROM the unknown baseband and null IMEI will be fixed? anywhere stated that in the post? what post# was it by any chance? Thanks!
amilayajr said:
Thanks for the help. I guess by flashing this custom ROM the unknown baseband and null IMEI will be fixed? anywhere stated that in the post? what post# was it by any chance? Thanks!
Click to expand...
Click to collapse
He does say it's " There is no baseband in this ROM. So its compatible with any carrier. Make sure u put ur APN in ur network settings." Seen nothing about IMEI. Post 105 http://forum.xda-developers.com/showpost.php?p=53697925&postcount=105
Rooted i747 said:
He does say it's " There is no baseband in this ROM. So its compatible with any carrier. Make sure u put ur APN in ur network settings." Seen nothing about IMEI. Post 105 http://forum.xda-developers.com/showpost.php?p=53697925&postcount=105
Click to expand...
Click to collapse
Well my note 3 right now it has "Unknown Baseband" and IMEI Null. so will this custom rom with no Baseband will fix this?
amilayajr said:
Well my note 3 right now it has "Unknown Baseband" and IMEI Null. so will this custom rom with no Baseband will fix this?
Click to expand...
Click to collapse
It would be up to you to try. Me, I would try. This is from Sammobile site for your phone http://www.sammobile.com/firmwares/download/45029/N900W8VLU2DOC4_N900W8OYADOC4_TLS/ Stock odin file.
I am lost. I have been reading through hours of material and am still not sure what to do. I purchased my att samsung galaxy note 3 n900a from a friend and it seems it use to be rooted. It has a custom recovery. I was able to verify the imei is good with att but had to use a program to locate it. My baseband is blank. It shows I have android 5.0 and that build is lrx21v. N900aucueoc2 4335446. But when I run a firmware test to see what I need to download (if that's even what I should be doing) it shows my phone is n900aucubmi9 android 4.3. My kernel shows 3.4.0-4335446. I'm not sure where to start for all the issues the phone has and I'm not sure I should download the 4.3 firmware when it's currently on 5.0. Please help.
hbaca25 said:
I am lost. I have been reading through hours of material and am still not sure what to do. I purchased my att samsung galaxy note 3 n900a from a friend and it seems it use to be rooted. It has a custom recovery. I was able to verify the imei is good with att but had to use a program to locate it. My baseband is blank. It shows I have android 5.0 and that build is lrx21v. N900aucueoc2 4335446. But when I run a firmware test to see what I need to download (if that's even what I should be doing) it shows my phone is n900aucubmi9 android 4.3. My kernel shows 3.4.0-4335446. I'm not sure where to start for all the issues the phone has and I'm not sure I should download the 4.3 firmware when it's currently on 5.0. Please help.
Click to expand...
Click to collapse
Not sure what it takes to get someone to reply on this but ok..... i was able to get a sim card and put service on it and it has made the phone work every now and then. It keeps slipping back into no mobile network and stops working though. I have updated the apn settings to the correct options. Still when it turns the network off it goes back to no baseband showing, no imei, tells me to insert sim. I'm wondering if it has something to do with the custom recovery that I have on it. I'm honestly not sure CAUSE IM NOT ABLE TO GET ANY FEEDBACK.
hbaca25 said:
Not sure what it takes to get someone to reply on this but ok..... i was able to get a sim card and put service on it and it has made the phone work every now and then. It keeps slipping back into no mobile network and stops working though. I have updated the apn settings to the correct options. Still when it turns the network off it goes back to no baseband showing, no imei, tells me to insert sim. I'm wondering if it has something to do with the custom recovery that I have on it. I'm honestly not sure CAUSE IM NOT ABLE TO GET ANY FEEDBACK.
Click to expand...
Click to collapse
I am no expert on this, and cannot offer much advice for it may violate the terms of this site. BUT, it sounds like you have a corrupt EFS partition, which is where the IMEI is stored. It is possible to set it right, but for that, you have to do your own research. Searching these forums for threads related to fixing EFS should be a good place to start.
Please note that I do not know if this is the case with your device. Its just where I would start my search. Good luck!