I installed Paranoid Android rom coming from JB with cocore 9.0. I followed the instructions (installing boot.img then the rom, gapps and supersu). Everything went smooth but I ended up with "no service". Apparently my sim card is not recognized. I use an italian SIM (TIM).
Any suggestion?
I had to revert back to my (nandroid backupped) old rom.
Sincerely
G.
gianpaoloc said:
I installe Paranoid Android rom coming from JB with cocore 9.0. I followed the instructions (installing boot.img then the rom, gapps and supersu). Everything went smooth but I ended up with "no service". Apparently my sim card is not recognized. I use an italian SIM (TIM).
Any suggestion?
I had to revert back to my (nandroid backupped) old rom.
Sincerely
G.
Click to expand...
Click to collapse
Do Factory reset.
shut_down said:
Do Factory reset.
Click to expand...
Click to collapse
Done, before and after installing the rom. Same result.
I also tried revierting back to my old rom (re-flashed with odin) and reistalling PA from the beginning. Same result.
I forgot to mention my device is a GT-I9070P. I thought it was the same as I9070 apart from the NFC (which I do not care about). Is this correct?
Any other suggestion?
Thanks
G.
gianpaoloc said:
Done, before and after installing the rom. Same result.
I also tried revierting back to my old rom (re-flashed with odin) and reistalling PA from the beginning. Same result.
I forgot to mention my device is a GT-I9070P. I thought it was the same as I9070 apart from the NFC (which I do not care about). Is this correct?
Any other suggestion?
Thanks
G.
Click to expand...
Click to collapse
Can you make sure that you re-install the firmware (stock ROM) Firmware GT-i9070P with similar, I mean with the Stock ROM GT-i9070p not GT-I9070 Stock ROM? Due to my knowledge although one brand, but both devices have different firmware (specially Stock ROM). As an example here.
gianpaoloc said:
Done, before and after installing the rom. Same result.
I also tried revierting back to my old rom (re-flashed with odin) and reistalling PA from the beginning. Same result.
I forgot to mention my device is a GT-I9070P. I thought it was the same as I9070 apart from the NFC (which I do not care about). Is this correct?
Any other suggestion?
Thanks
G.
Click to expand...
Click to collapse
In that case you must follow this guide: http://forum.xda-developers.com/showthread.php?t=2191628
shut_down said:
In that case you must follow this guide: http://forum.xda-developers.com/showthread.php?t=2191628
Click to expand...
Click to collapse
You deserve the biggest possible thanks!!!
Indeed, I substituted the "tee" folder in paranoid android rom with the tee folder I found under my own I9070P JB rom (/system/lib/tee) and restarted from the beginning. This time everything went smooth and I have my network.
For those interested, I was using a samsung original I9070P JB rom, so the "tee" folder is the one coming from the original samsung firmware and it worked flawlessly with CM11 based paranoid android.
Thanks a lot!
Sincerely
G.
Related
Hi,
First I rooted my SGA running android 2.3.5
Second I tried to install CM 9.1.
Third Some things got messed up, and accidentally deleted my root some way or another.
Fourth Installing CM 9.1 worked!
But then... My phone wasn't rooted anymore
I want it to be root!
I read several things about using ODIN, (I thought if I reinstalled my stock firmware, I'd root it again)
But the problem is: I don't have a orginal USB cable, and my others don't work..
And I can't install KIES on my phone...
How can I flash my phone to the original firmware?
I hope you can help me!
2drummer2 said:
Hi,
First I rooted my SGA running android 2.3.5
Second I tried to install CM 9.1.
Third Some things got messed up, and accidentally deleted my root some way or another.
Fourth Installing CM 9.1 worked!
But then... My phone wasn't rooted anymore
I want it to be root!
I read several things about using ODIN, (I thought if I reinstalled my stock firmware, I'd root it again)
But the problem is: I don't have a orginal USB cable, and my others don't work..
And I can't install KIES on my phone...
How can I flash my phone to the original firmware?
I hope you can help me!
Click to expand...
Click to collapse
download bald eagle rom and flash it like u flashed cm9
side_effect said:
sownload bald eagle rom and flash it like u flashed cm9
Click to expand...
Click to collapse
Is it the official/original firmware then?
Because after I flashed it, I want to root it again.
2drummer2 said:
Is it the official/original firmware then?
Because after I flashed it, I want to root it again.
Click to expand...
Click to collapse
It is latest firmware,prerooted with no other cosmetic changes
side_effect said:
It is latest firmware,prerooted with no other cosmetic changes
Click to expand...
Click to collapse
Ok...
But I'd like to have cyanogenmod 9.1. But WITH root.
So if I flashed this ROM once.
Can I install Cyanogenmod 9.1 after, with root?
flash CM9. if no root, flash any kernel available for the same.
Xr01d_GT said:
flash CM9. if no root, flash any kernel available for the same.
Click to expand...
Click to collapse
I'm not good at this :$
Is your kernel good?
Please tell me exactly what to do because I don't want to brick my phone just like a friend of me.
Hi all,
First post, so please go easy on me!
Earlier today I rooted my N7000 Glaxy Note, UK Version (Unlocked). However, I have since managed to clear the Firmware (ICS), and now I have nothing on there. The phone itself will not boot, and presents me with PhilZ Touch 3 CWM Base Version: 6.0.2.7
I was trying to get Kitkat on the device, however now I have nothing on there and every time I try and install the rom I downloaded (CM-11), I get an Error 7 within the recovery, so it aborts the installation.
Can anyone direct me at all? When looking for stock Android, I cannot find any for my exact device, etc. They are all different carriers / mobile networks.
To be clear, my device is as follows:
Galaxy Note N7000
Unlocked UK Model
XXLSA
Any help would be greatly appreciated.
LondonT said:
Hi all,
First post, so please go easy on me!
Earlier today I rooted my N7000 Glaxy Note, UK Version (Unlocked). However, I have since managed to clear the Firmware (ICS), and now I have nothing on there. The phone itself will not boot, and presents me with PhilZ Touch 3 CWM Base Version: 6.0.2.7
I was trying to get Kitkat on the device, however now I have nothing on there and every time I try and install the rom I downloaded (CM-11), I get an Error 7 within the recovery, so it aborts the installation.
Can anyone direct me at all? When looking for stock Android, I cannot find any for my exact device, etc. They are all different carriers / mobile networks.
To be clear, my device is as follows:
Galaxy Note N7000
Unlocked UK Model
XXLSA
Any help would be greatly appreciated.
Click to expand...
Click to collapse
1. To flash KitKat you'll need a different recovery so flash the latest raw kernel.
2. You can flash any N7000 stock ROM , it doesn't have to be the same as your old one.
XxPixX said:
1. To flash KitKat you'll need a different recovery so flash the latest raw kernel.
2. You can flash any N7000 stock ROM , it doesn't have to be the same as your old one.
Click to expand...
Click to collapse
Many thanks for the response.
I am not completely clued up to this, however I do have a very good understanding of computing, etc. Could you please explain what you mean by "a different recovery, so flash the latest raw kernel"? I wouldn't know where to locate one of these!
Also, is this to say I can flash any stock ROM I find, despite it not being specifically for a UK network, etc?
LondonT said:
Many thanks for the response.
I am not completely clued up to this, however I do have a very good understanding of computing, etc. Could you please explain what you mean by "a different recovery, so flash the latest raw kernel"? I wouldn't know where to locate one of these!/QUOTE]
Well, since recovery is build into the kernel. Any kernel with updated recovery will be fine.
Like this one.
http://forum.xda-developers.com/showthread.php?t=2739044
LondonT said:
Also, is this to say I can flash any stock ROM I find, despite it not being specifically for a UK network, etc?
Click to expand...
Click to collapse
Yes.
Click to expand...
Click to collapse
Azeazezar said:
LondonT said:
Many thanks for the response.
I am not completely clued up to this, however I do have a very good understanding of computing, etc. Could you please explain what you mean by "a different recovery, so flash the latest raw kernel"? I wouldn't know where to locate one of these!/QUOTE]
Well, since recovery is build into the kernel. Any kernel with updated recovery will be fine.
Like this one.
http://forum.xda-developers.com/showthread.php?t=2739044
Yes.
Click to expand...
Click to collapse
Thanks for the response.
Downloaded Forest-CM11 V4, and copied to SD Card. Went to install via CWMR and it says: "This package is for Galaxy Note, N700" devices. This is a " "
It doesn't say what mine is, or what it believes it to be (it is a N7000 100%).
Any help?
Click to expand...
Click to collapse
LondonT said:
Azeazezar said:
Thanks for the response.
Downloaded Forest-CM11 V4, and copied to SD Card. Went to install via CWMR and it says: "This package is for Galaxy Note, N700" devices. This is a " "
It doesn't say what mine is, or what it believes it to be (it is a N7000 100%).
Any help?
Click to expand...
Click to collapse
Maybe flash latest rooted philz first with ODIN
Click to expand...
Click to collapse
xMorpheus said:
LondonT said:
Maybe flash latest rooted philz first with ODIN
Click to expand...
Click to collapse
Trying to locate to no avail.
When I try in ODIN it fails to write.
Click to expand...
Click to collapse
LondonT said:
Trying to locate to no avail.
When I try in ODIN it fails to write.
Click to expand...
Click to collapse
Flash this using this with the help of this
Then use this to get rid of yellow traingle
EDIT: are you sure you are rooted?
what steps did you follow?
Probably failing because no USB debugging?
Does it show 'added' in ODIN?
Try flashing one of the zip philz.
Download the one for your baseband
@LondonT download raw kernel R4 or R5 (search for it) and put it on your external sd card. Flash from philz recovery, reboot recovery and then flash KK rom from your external card along with gapps.
I tried flashing a rom to my Note 3... I unfortunately skipped the backup step, and now have a device with no OS... when I try to flash a ROM I am getting two codes...
E:Footer is wrong
E:signature verification failed...
please help
aubreysdad09 said:
I tried flashing a rom to my Note 3... I unfortunately skipped the backup step, and now have a device with no OS... when I try to flash a ROM I am getting two codes...
E:Footer is wrong
E:signature verification failed...
please help
Click to expand...
Click to collapse
if you where on jb or leaked kk use this http://forum.xda-developers.com/showthread.php?t=2559715 if you where on official kk use this http://forum.xda-developers.com/showthread.php?t=2703006 what rom where you trying to flash
jerrycoffman45 said:
if you where on jb or leaked kk use this http://forum.xda-developers.com/showthread.php?t=2559715 if you where on official kk use this http://forum.xda-developers.com/showthread.php?t=2703006 what rom where you trying to flash
Click to expand...
Click to collapse
firenote... im new to all of this... ive been jailbreaking iphones for a while... this is a little more advanced...
Just remember to use the right version of safestrap for your phone there is one for jb and one for kk also you can't mix and match roms with firmware if your phone has jb you can only flash jb roms and if you are on kk you can only flash kk roms since you are new to this I would suggest you do a lot of reading first
jerrycoffman45 said:
Just remember to use the right version of safestrap for your phone there is one for jb and one for kk also you can't mix and match roms with firmware if your phone has jb you can only flash jb roms and if you are on kk you can only flash kk roms since you are new to this I would suggest you do a lot of reading first
Click to expand...
Click to collapse
I did the same thing I had everything working right but tried to install custom rom on stock rom slot erased stock rom but rebooted so not it want reboot back to safestrapp. I think I deleted that too..
cook23 said:
I did the same thing I had everything working right but tried to install custom rom on stock rom slot erased stock rom but rebooted so not it want reboot back to safestrapp. I think I deleted that too..
Click to expand...
Click to collapse
Use one of the links in post 2
Samsung Galaxy S III i9305 LTE
flashed with CWM 10.1.3 (based on Android 4.2.2)
Compilation number: cm_i9305-userdebug 4.2.2 JDQ39E eng.jenkins.20130923.145024 test-keys
Photo camera stopped from working.
When I tap on Camera icon there is message that can't connect to camera. Camera is not starting.
I read probably everything. I did everything that I suppoused that can help me ... no results
There is lot of possible sollutions, but none of them provides result. I hope that anybody known solution ...
There is one post which I dont understand:
http://forum.xda-developers.com/galaxy-s3/general/jb-4-1-2-camera-driver-t2006128
> 1. Please dial in stock dialer the following: *#34971539#
What does it mean ?
When I tried to call this number (like normal phone call) I have message (in translation to english): "There is a problem with connection or MMI code is not correct"
PS.
When I flashed CWM 11 camera was working but I need to have CWM10 because is based od Android < 4.4
I have to had Android 4.1 – 4.3 because only on those version Samsung DriveLink application is working.
I want to use phone in my Toyota car with mirror link for full mirroring car's display.
Drive link from GooglePlay:
https://play.google.com/store/apps/details?id=app.scm&hl=pl
And Drivelink from Samsung:
supported android versions: 4.1 – 4.3
Hello and good evening/night? ?,
it's a known problem on all ROMs for I9305. I am on Resurrection Remix 5.5.5 Sammy and have the same problem.
No one of the devs had found a solution for this.
even DriveLink not works
Trafalgar Square said:
Hello and good evening/night? ,
it's a known problem on all ROMs for I9305. I am on Resurrection Remix 5.5.5 Sammy and have the same problem.
No one of the devs had found a solution for this.
Click to expand...
Click to collapse
even DriveLink not works I am a little bit depressed ... I lost guarantee for my smartfon without any result ((
howto install jellybean 4.3 original but with CWM bootloader ?
marcint43 said:
even DriveLink not works I am a little bit depressed ... I lost guarantee for my smartfon without any result ((
Click to expand...
Click to collapse
Do you know how to install 4.3 Jellybean original version - preferably with my current CWM bootloader ?
Maybe original version of android - no Cyanogen wil work ...
in 4.3 version of android there is a chance to do that ...
marcint43 said:
Do you know how to install 4.3 Jellybean original version - preferably with my current CWM bootloader ?
Maybe original version of android - no Cyanogen wil work ...
in 4.3 version of android there is a chance to do that ...
Click to expand...
Click to collapse
Just flash the stock firmware with odin.
Try THIS SITE and see if your country region is there
If not sammobile.com has a comprehensive list(the download is very slow)
can I put any of those zip files ?
noppy22 said:
Just flash the stock firmware with odin.
Click to expand...
Click to collapse
but this will erase my CWM recovery, is it true ?
Is it possible to have CWM recovery with stock Android ?
I downloaded from Sammobile ZIP: I9305XXUEML9_I9305PRTEML1_PRT.zip (this is 4.3 android)
..but for now I have I9305XXUFNJ1 displayed in my phone ... is this OK or I can brick my phone ?
In pull-down menu there are possibilities:
2014-10-01 Poland (T-mobile) 4.3 I9305XXUENH1 I9305TPLENH1
2014-05-01 Poland (T-mobile) 4.3 I9305XXUENC1 I9305TPLENE1
2014-01-01 Poland (PLUS) 4.3 I9305XXUEMKC I9305PLSEMK1 NO
2014-01-01 Poland (Play) 4.3 I9305XXUEML9 I9305PRTEML1 <<<====This one I downloaded, from:
sammobile /firmwares/download/24228/I9305XXUEML9_I9305PRTEML1_PRT/
I don't know if I have "branded" phone ... for Poland there are "Play" "Tmobile" Plus" zip file...
I know that previous owner of phone bought it at "Orange" telecomunication operator. I dont see any operator logo etc on phone ...
Is this relevant which version I will take ?
Maybe just "the newer the better" ?
Odin doesn't works for me on any windows machine that I have. I am struggling with Heimdall software ...
I successfully made this:
heimdall flash --RECOVERY recovery-clockwork-touch-6.0.4.7-i9305.img --no-reboot
region ok, but ...
noppy22 said:
Try THIS SITE and see if your country region is there
Click to expand...
Click to collapse
yes there is my region (Poland) but only 4.4.4 version
marcint43 said:
yes there is my region (Poland) but only 4.4.4 version
Click to expand...
Click to collapse
I see 4.3 - I9305XXUENC1 / TPLENE1 Poland T-Mobile version from the tsar3000 site?? Anyway the one you downloaded from sammobile will be fine
The branded versions only give you different bloatware. It shouldn't make any difference otherwise(other than slightly older/newer baseband). And yes it will overwrite the recovery, but you can install cwm later.
I'm not sure what the process is exactly with heimdall as I have odin, but I think it is similar
noppy22 said:
I see 4.3 - I9305XXUENC1 / TPLENE1 Poland T-Mobile version from the tsar3000 site??
Click to expand...
Click to collapse
yes, I see it on the list, but when I try to download via "mirror 1 or 2 links" - I am redirected to another list - where there is only 4.4.4 versions
After few hours I have to go to work, so I am going to sleep now, but tomorrow I will flash phone with that version
Did you heard that flashing from 4.4.4 just to 4.3 will brick the phone ? (because of changes in "knox bootloader"??? My coleague says that ...)
and "I have to downgrade to 4.2 and than upgrade to 4.3 ... is it true ?
marcint43 said:
yes, I see it on the list, but when I try to download via "mirror 1 or 2 links" - I am redirected to another list - where there is only 4.4.4 versions
After few hours I have to go to work, so I am going to sleep now, but tomorrow I will flash phone with that version
Did you heard that flashing from 4.4.4 just to 4.3 will brick the phone ? (because of changes in "knox bootloader"??? My coleague says that ...)
and "I have to downgrade to 4.2 and than upgrade to 4.3 ... is it true ?
Click to expand...
Click to collapse
What is the latest stock version you have had on the phone? If you have never had 4.4.4 stock, then you should be fine. Just always use the 4.3 to go back to stock and you will always have the old bootloader.
Maybe check your bootloader before you do anything
DriveLink needs GoogleApps libraries! (pure CyanogenMod is not enough)
BINGO! After installing GoogleApps.zip (for 4.4.3) DriveLink app started to run - not crashing anymore ...
but the car still not see any phone ... but this is because of android version ..4.4.4
Android have to be in 4.1-4.3 versions.
noppy22 said:
What is the latest stock version you have had on the phone? If you have never had 4.4.4 stock, then you should be fine. Just always use the 4.3 to go back to stock and you will always have the old bootloader.
Maybe check your bootloader before you do anything
Click to expand...
Click to collapse
Originally I was had 4.4.2 version, original samsung, before any changes.
Then I installed ClockworkMode custom recovery ... and next CyanogenMod 11 android clone (based on 4.4.4 android).
Than I downgraded CyanogenMod to 10.1.3 version (based on 4.2.? android), just because I did'nt find any 10.2 Cyanogen (based on 4.3 android).
Next I again installed CyanogenMod 11 (android 4.4.4) ... as I have now.
Recovery is still CLockworkMode (with TouchPhiz) ...nice and functional (with working adb from my Linux).
Oh, I exactly did that what is described on site: https://wiki.cyanogenmod.org/w/Install_CM_for_i9305
(using CWM as custom recovery)
> Maybe check your bootloader before you do anything
how ? What do you mean ?
marcint43 said:
Originally I was had 4.4.2 version, original samsung, before any changes.
Then I installed ClockworkMode custom recovery ... and next CyanogenMod 11 android clone (based on 4.4.4 android).
Than I downgraded CyanogenMod to 10.1.3 version (based on 4.2.? android), just because I did'nt find any 10.2 Cyanogen (based on 4.3 android).
Next I again installed CyanogenMod 11 (android 4.4.4) ... as I have now.
Recovery is still CLockworkMode (with TouchPhiz) ...nice and functional (with working adb from my Linux).
Oh, I exactly did that what is described on site: https://wiki.cyanogenmod.org/w/Install_CM_for_i9305
(using CWM as custom recovery)
> Maybe check your bootloader before you do anything
how ? What do you mean ?
Click to expand...
Click to collapse
You can see in download mode. It will say something like "Knox warranty void 0x1" or something similar. This means you have the new bootloader.
But anyway, it sounds like you have found a way for drivelink to work? Try installing a custom JB rom like CM 10.1.3 or Alliance rom and you should have it working
CM10.1.3 - drivelink doesnt work
noppy22 said:
You can see in download mode. It will say something like "Knox warranty void 0x1" or something similar. This means you have the new bootloader.
But anyway, it sounds like you have found a way for drivelink to work? Try installing a custom JB rom like CM 10.1.3 or Alliance rom and you should have it working
Click to expand...
Click to collapse
Yes, I have in download mode message about knox 0x1
Even now, when I have CM10.1.3 installed.
unfortunately over CM 10.1.3 DriveLink is crashing
App starting, then it asks me about "DriveLink account" (WTF?) when I skip all questions - Drive link starting up with beautifull picture an then message appears: that Drive Link has been stopped....
PS. without google apps - it crashes immediately
I will try with 4.3 stock android ...(but now I have to charge batteries because CM has been crashed and discharged me battery almost completly )
PS2. I am installing this DriveLink:
http://www.colmoschinxtreme.com/android/item/drivelink
@marcint43
I noticed on the link you posted that drivelink only works with touchwiz. The stock rom should work fine, but another alternative would be to use a custom touchwiz rom like Alliance Rom. I used this rom a while ago and loved the customization and less bloat than stock(plus all the other advantages of having root access)
AllianceROm and heimdall problem with stock
noppy22 said:
Alliance Rom
Click to expand...
Click to collapse
I will try that at first
Just flash with adb sideload is possible ? It is downloading now ... but I see that size is about 1GB ... so is there recovery included ?
I dont understand well what is written on page you have written...
BTW. anybody knows how to use heimdall software to flash stock version ?
this have to be like described on: http://www.htcmania.com/showthread.php?t=698436
?
so: unzip , untar ... and next:
heimdall flash --BOOT boot.img --RECOVERY recovery.img --SYSTEM system.img --CACHE cache.img --HIDDEN hidden.img --RADIO modem.bin --BOOTLOADER sboot.bin --TZSW tz.img
?
(Odin doesn't works for me ... on any computer that I have with windows )
marcint43 said:
Just flash with adb sideload is possible ? It is downloadin.....
Click to expand...
Click to collapse
this was stupid sorry
There is special part of installation guide: .... If you don't want to use ROM Customizer to select your options you can reboot into recovery and flash the ROM zip. Default install is Stock Kernel, All Samsung and Google Apps and Stock Theme.
for startup is the best
Next time I will short ROM
marcint43 said:
I will try that at first
Just flash with adb sideload is possible ? It is downloading now ... but I see that size is about 1GB ... so is there recovery included ?
I dont understand well what is written on page you have written...
Click to expand...
Click to collapse
If you still have CM installed, download "ROM customizer" from the play store, and follow the steps from post #3 in the alliance rom thread. AFAIK the recovery will stay the same as the one you have already
recovery overwritten ?
noppy22 said:
If you still have CM installed, download "ROM customizer" from the play store, and follow the steps from post #3 in the alliance rom thread. AFAIK the recovery will stay the same as the one you have already
Click to expand...
Click to collapse
...ok, but ...by default ... "ALL" .... without Customizer ... this will overwrite my recovery too ? I will lost my CWM recovery and any other will be installed instead ?
marcint43 said:
...ok, but ...by default ... "ALL" .... without Customizer ... this will overwrite my recovery too ? I will lost my CWM recovery and any other will be installed instead ?
Click to expand...
Click to collapse
I can't remember whether the recovery was over-written, I don't think so. It would be easy to re-install your favourite recovery anyway......
Is there some way to remove google core and gapps from stock rom?
I'm using aosp 7.1.2 without gapps and my phone is awesome now but i'm interested in go back to stock because there are somethings stock rom do better than non-stock roms.
Someone to enlighten me in this case?
lucasgta95 said:
Is there some way to remove google core and gapps from stock rom?
I'm using aosp 7.1.2 without gapps and my phone is awesome now but i'm interested in go back to stock because there are somethings stock rom do better than non-stock roms.
Someone to enlighten me in this case?
Click to expand...
Click to collapse
Hello, this rom has a function of removing the Gapps.
https://forum.xda-developers.com/xperia-sp/development/rom-trueancestor-sp-lite-edition-v3-t2921869
__________________
Could you make a backup of your rom 4.3 stock using TWRP and upload it on MEGA or Google drive?
I need it a lot. I can not go back to the Rom stock, I've tried everything.
My device is C5303.
Docmine7 said:
Could you make a backup of your rom 4.3 stock using TWRP and upload it on MEGA or Google drive?
I need it a lot. I can not go back to the Rom stock, I've tried everything.
My device is C5303.
Click to expand...
Click to collapse
You can download any version of stock using xperia firm dowloader:
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Then flash it with flashtool.
lucasgta95 said:
You can download any version of stock using xperia firm dowloader:
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Then flash it with flashtool.
Click to expand...
Click to collapse
This method does not work on my phone, I've tried everything, the last alternative is to restore a TWRP backup.
"Flashmode" is not working properly on my phone, my phone reboots in the middle of the process. I installed the drivers correctly, and continued the problem.
Docmine7 said:
This method does not work on my phone, I've tried everything, the last alternative is to restore a TWRP backup.
"Flashmode" is not working properly on my phone, my phone reboots in the middle of the process. I installed the drivers correctly, and continued the problem.
Click to expand...
Click to collapse
i cannot upload because it will take forever with my upload rate, but you can use existenz rom, it is a improved version of stock, i'm using it without gapps