Related
Hi, im just wondering is there any benefit using a 2amp charger on the htc m8 , faster charging ? i know HTC are gonna release a faster charger which is 1.67amp , is it just the amp or it has some feature Quick Charge 2.0 built in you cant get with other chargers ?
the HTC One is rated to support Quick Charge 2.0 capable of accepting up to 60 watts of power – an increase of almost 100% compared to phones with Quick Charge 1.0. The 1.5amp charger bundled with the HTC One (M8), however, does not support Quick Charge 2.0. HTC is planning on releasing an optional 1.67amp charger accessory that will come with the technology later this year
Thanks
Yeah, it will charge a bit faster.
Sent from my HTC One_M8 using Tapatalk
Tikerz said:
Yeah, it will charge a bit faster.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Would it be safe though? Cause I heard someone was using a third party charger on 2.0 and the guy said it was heating up like hell
Sent from my Nexus 7 using Tapatalk
ekabon said:
Would it be safe though? Cause I heard someone was using a third party charger on 2.0 and the guy said it was heating up like hell
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I've used the 2.0A charger that came with my Galaxy S4 and didn't really notice the phone heating up to unusual temps.
You can use a 10A charger if you have one (and it works with your power outlet), the phone should never draw more than the maximum it draws.
Sent from my C6903 using Tapatalk
I would really like to hear from someone who's actually used one with our phone model. Thanks
Sent from my HTC One_M8 using Tapatalk
ekabon said:
I would really like to hear from someone who's actually used one with our phone model. Thanks
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I originally used the charger I got with my M8, but then switched to a 2.5amp charger. According to GSam, my time to charge from around 80% to full is around 15 mins, but with the original charger, it was around 30 mins.
So from my experience, it does charge faster. From what I have read about QC2, the technology is in the processor in the phone. The charger can be any type, as long as it is able to deliver up to 60 watts.
See here - http://www.zdnet.com/qualcomms-quick-charge-2-0-offers-75-percent-faster-charging-7000026519/
The tech is actually in both the phone AND the wall charger:
From http://www.qualcomm.com/chipsets/quick-charge
"While Quick Charge 1.0 rests in the devices only, Quick Charge 2.0 resides in both the device, offered as a standalone IC solution or as part of the PMIC (power management integrated circuit) of Snapdragon™ 800 processors, and in the AC/DC wall charger."
The one you link is worded a little ambiguously:
"Qualcomm hopes to take things further by integrating Quick Charge 2.0 technology into standard micro-USB AC/DC wall chargers. These chargers will look and work like standard chargers, but will be able to deliver Quick Charge to compatible devices."
I tripped on it a couple times when reading it too, but it's implying that the tech does not currently reside in standard chargers, since they're still working on integrating it.
guess i will get the HTC fast charger when out and i bet we should get compatible quick charge 2.0 chargers too
Thanks
The amperage of the charger makes no difference, the device will only ever draw the power it requires to charge, no more. so a 5a charger would be no different to a 2a charger if the phone only draws 1.5a for example. find out what the device needs to charge and get as close as you can to that size for protection reasons
uscool said:
Hi, im just wondering is there any benefit using a 2amp charger on the htc m8 , faster charging ? i know HTC are gonna release a faster charger which is 1.67amp , is it just the amp or it has some feature Quick Charge 2.0 built in you cant get with other chargers ?
the HTC One is rated to support Quick Charge 2.0 capable of accepting up to 60 watts of power – an increase of almost 100% compared to phones with Quick Charge 1.0. The 1.5amp charger bundled with the HTC One (M8), however, does not support Quick Charge 2.0. HTC is planning on releasing an optional 1.67amp charger accessory that will come with the technology later this year
Thanks
Click to expand...
Click to collapse
ekabon said:
Would it be safe though? Cause I heard someone was using a third party charger on 2.0 and the guy said it was heating up like hell
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yes, it will charge it faster. I used my 2amp charger and it did charge it faster. The phone may have some protection built in to protect the phones hardware. But the battery can handle much higher charge rates and the battery shouldn't start heating up till 20-30 amps. Yes, that's right.
I use Li-poly to race electric RC's and we charge them up to 50 amps. This charger will --->http://www.hobbyking.com/hobbyking/store/__46368__iCharger_308DUO_1300W_Dual_Channel_8s_Balance_Charger.html
Most people only charge at 5-10 amps, but to get peak performance, you will need to create a bit of heat and that doesn't happen till 20-30 amps.
Since I jumped from my old note 3tothe m8 I was able to keep the charger and it's a 2A one. Will I get the full 2.0 benefits with it or must I wait for the HTC one?
Sent from my HTC One_M8 using xda app-developers app
PunishedSnake said:
Since I jumped from my old note 3tothe m8 I was able to keep the charger and it's a 2A one. Will I get the full 2.0 benefits with it or must I wait for the HTC one?
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
You will get whatever amp the M8 can take. i assume its 2A
I have a 2amp charger and i use it for my M8. i only see about a 30 min different from using a 1amp charger.
Its not just Amps, quickcharge 2.0 Also bumps up voltage. I tested multiple combinations with my htc one M8, here are my findings:
Quickcharge 2.0 18W Aukey (with regular micro usb cable): 9v/1.1A (~10w)
Quickcharge 2.0 18W Aukey (with data cut off cable): 5v/1.52A (~7.5w)
Wall 5v 2.4A charger: 5v/1.52A (~7.5w)
Stock 5v 1A charger: 5v/0.99A (~5w)
Car 5v 2A charger: 5v/1.3A (~6.5w)
some old 5v 700mA charger: 5v/0.7A (~3.5w)
MacBook Air USB port (2013) (with regular micro usb cable): 5v/500mA (~2.5w)
MacBook Air USB port (2013)(with data cut off cable): 5v/1A (~5w)
Ipad charger rated 5.2V/2.3A : 5v/1A (~5w) (no clue why its so sucky)
Also I noticed m8 once connected to charger (non Quickcharge 2.0) slowly increases charge current. if voltage drops below 4.92v it drops it back to these fixed values, whichever is immediate lower: 3oomA, 500mA, 700mA, 1A, 1.3A, 1.42A. 1.52A
these values are as per multimeters.
my car charger is tricky, it sometimes just falls to 1A instead of 1.3 as it border lines V to 4.92 while at 1.3Amps. (it is rated for 2.4A)
Dude... This thread you replied to is a YEAR old!
This has already been heavily discussed in newer threads.
Sent using Tapatalk
Hi guys!
I recently switched from a Samsung galaxy s5 to a nexus 6. It's been more than great, really. Why did I ever buy galaxy phones?!
I'm confused over quick charge 2.0 and compatibility with other chargers and couldn't find any proper information on the subject.
At the moment I own:
- Aukey 5-port 35W Charger
- Tecknet 6-port 50W Charger
- Anker Astro E5 15000mAh battery bank with 2A + 1A ports
- Large assortment of other single port chargers @ 2-2.4A from Samsung, ASUS, and several aftermarket brands.
All of these chargers, and the battery, delivered (tested with the Ampere app and tons of different cables) ~2A to the galaxy but only deliver ~1A to the nexus 6. The Motorola turbo charger obviously works as intended. Now my questions:
- Does quick charge 2.0 limit any non compatible chargers to 1 amp?
- Is there a way to mod chargers to at least get back 2A charging?
- Worst case, does anyone have experience with a recommendable battery bank and multi port chargers that support quick charge 2.0?
Thanks!
Deleted
@cam30era
I'm using the franco kernel at the moment and as far as I can tell it doesn't have any options related to charge speeds. I'll look into other kernels.
Thanks for the info!
Jonathan030 said:
@cam30era
I'm using the franco kernel at the moment and as far as I can tell it doesn't have any options related to charge speeds. I'll look into other kernels.
Thanks for the info!
Click to expand...
Click to collapse
Welcome.
BTW, there's a button for that...
Jonathan030 said:
@cam30era
I'm using the franco kernel at the moment and as far as I can tell it doesn't have any options related to charge speeds. I'll look into other kernels.
Thanks for the info!
Click to expand...
Click to collapse
Why would you need options relating to change charge speeds? Qualcomm quick charger works on any kernel, if you're talking about USB fast charging, it's already enabled in Franco kernel.
There isn't a need to switch to other kernels.
Sent from my Nexus 6 using Tapatalk
@zephiK You misunderstood my question. The problem I'm looking to solve is the slow charge rate from the chargers in the original post.
To add to that. My macbook also charged my old galaxy phone @ 2amps but with my n6 only does 500mA.
Nothing wrong with the turbo charger
Jonathan030 said:
@zephiK You misunderstood my question. The problem I'm looking to solve is the slow charge rate from the chargers in the original post.
To add to that. My macbook also charged my old galaxy phone @ 2amps but with my n6 only does 500mA.
Nothing wrong with the turbo charger
Click to expand...
Click to collapse
Laptop USB ports at limited to 500mah output unless its a dedicated charging port with USB 3.0 then It can push 1.6A so I don't see how that's possible to charge at 2A from a laptop.
@Pilz this is irrelevant. My 2014 macbook pro charges my old phone much faster than the nexus 6.
Refer to the original post for the topic at hand
Quickcharge 2.0 devices uses the data pin on usb to determine if the charger connected is a quickcharge 2.0 charger. The devices you are using do not have this capability so they charge slower. I do not think this can be changed kernel or phone side.
Thanks! I guess I'll have to replace the chargers/battery
Jonathan030 said:
- Worst case, does anyone have experience with a recommendable battery bank and multi port chargers that support quick charge 2.0?
Click to expand...
Click to collapse
Here are a few on Amazon.com:
CHOE 6 port home charger with 2 Quick Charge 2.0 ports: $34.99 - http://www.amazon.com/dp/B00UBK9M08
CHOE 4 port car charger with 1 Quick Charge 2.0 port: $21.99 - http://www.amazon.com/gp/product/B00R18XTCA
Aukey Quick Charge 2.0 10000 mAh battery pack: $29.99 - http://www.amazon.com/dp/B00UBDI7EC
I haven't tried any of them yet; the car charger arrives tomorrow
Jonathan030 said:
@zephiK You misunderstood my question. The problem I'm looking to solve is the slow charge rate from the chargers in the original post.
To add to that. My macbook also charged my old galaxy phone @ 2amps but with my n6 only does 500mA.
Nothing wrong with the turbo charger
Click to expand...
Click to collapse
I could be wrong S5 I looked up uses usb3.0 right? Does your macbook have usb3.0? If so then the usb 3.0 port can supply more current when detected being a usb3.0 device by your computer and ever more so it is possible for the mac to output a little more current. Can you plug in the S5 then open system profiler to look at USB device tree to see current being delivered? The nexus 6 only using usb2.0 would not get the same treatment by the comp and only receive the max standard of .5 A.
There are many details about the actual max current that can be supplied by the computer's ubs port that I don't know when they are applicable I've just stated reading so I'm not sure why you can get 2.0 A on your S5 and not less, since there are standards that set the max current. Even more complicated is that under certain conditions macs have their own heirarchy of supplying more current to some devices if they "say they need" more current and even then there are limitations. So again I'm not sure what is at play exactly, that determines why the S5 gets more than usual. The .5A is normal for current output on USB 2.0 in the nexus6.
I actually got this in the mail yesterday, and the wall chargers works great...Havent have a chance to test out the car one though!
http://www.amazon.com/gp/product/B00Q6LK81I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Plus its officially certified by Qualcomm for support 2.0
Jonathan030 said:
@Pilz this is irrelevant. My 2014 macbook pro charges my old phone much faster than the nexus 6.
Refer to the original post for the topic at hand
Click to expand...
Click to collapse
That doesn't make sense which is why I went into some detail about laptop or any computers USB ports. I unfortunately had a MB Pro and hated it, and it never charged any of my phone a at 2A including my wife's old S5. I don't have it anymore so I can't test it again to verify. The person I quoted below explained it a little better than I did.
MunkinDrunky said:
I could be wrong S5 I looked up uses usb3.0 right? Does your macbook have usb3.0? If so then the usb 3.0 port can supply more current when detected being a usb3.0 device by your computer and ever more so it is possible for the mac to output a little more current. Can you plug in the S5 then open system profiler to look at USB device tree to see current being delivered? The nexus 6 only using usb2.0 would not get the same treatment by the comp and only receive the max standard of .5 A.
There are many details about the actual max current that can be supplied by the computer's ubs port that I don't know when they are applicable I've just stated reading so I'm not sure why you can get 2.0 A on your S5 and not less, since there are standards that set the max current. Even more complicated is that under certain conditions macs have their own heirarchy of supplying more current to some devices if they "say they need" more current and even then there are limitations. So again I'm not sure what is at play exactly, that determines why the S5 gets more than usual. The .5A is normal for current output on USB 2.0 in the nexus6.
Click to expand...
Click to collapse
Tower1972 said:
I actually got this in the mail yesterday, and the wall chargers works great...Havent have a chance to test out the car one though!
http://www.amazon.com/gp/product/B00Q6LK81I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Plus its officially certified by Qualcomm for support 2.0
Click to expand...
Click to collapse
Getwow is officially certified? Why, because they're Amazon page says so?
Scroll down close to the bottom to see Qualcomm certified accessories:
https://www.qualcomm.com/products/snapdragon/quick-charge
PaisanNYC said:
Getwow is officially certified? Why, because they're Amazon page says so?
Scroll down close to the bottom to see Qualcomm certified accessories:
https://www.qualcomm.com/products/snapdragon/quick-charge
Click to expand...
Click to collapse
Those lying bastids! They even stamped Qualcomm 2.0 right on the side lol . Regardless..Wall chargers works as does the car charger, same as the Motorola one
Tower1972 said:
Those lying bastids! They even stamped Qualcomm 2.0 right on the side lol . Regardless..Wall chargers works as does the car charger, same as the Motorola one
Click to expand...
Click to collapse
Qualcomm doesn't post every certified charger on their website. In would email the manufacturer and ask for their certification or a picture of it which most will show you assuming on they're legit.
Jonathan030 said:
Hi guys!
I recently switched from a Samsung galaxy s5 to a nexus 6. It's been more than great, really. Why did I ever buy galaxy phones?!
I'm confused over quick charge 2.0 and compatibility with other chargers and couldn't find any proper information on the subject.
At the moment I own:
- Aukey 5-port 35W Charger
- Tecknet 6-port 50W Charger
- Anker Astro E5 15000mAh battery bank with 2A + 1A ports
- Large assortment of other single port chargers @ 2-2.4A from Samsung, ASUS, and several aftermarket brands.
All of these chargers, and the battery, delivered (tested with the Ampere app and tons of different cables) ~2A to the galaxy but only deliver ~1A to the nexus 6. The Motorola turbo charger obviously works as intended. Now my questions:
- Does quick charge 2.0 limit any non compatible chargers to 1 amp?
- Is there a way to mod chargers to at least get back 2A charging?
- Worst case, does anyone have experience with a recommendable battery bank and multi port chargers that support quick charge 2.0?
Thanks!
Click to expand...
Click to collapse
It is technically incorrect for the phone to accept more than 1 amp on a 5v charger. The quick charge *protocol* negotiates a non-standard charge voltage (up to 12 volts!!!). Quick charge is actually BAD FOR YOUR BATTERY! The higher the current, the greater the temperature. The greater the temperature, the lower the battery life.
Unless you *need* it to charge that fast in an emergency, don't.
I've never even plugged in the charger that came with mine, and I don't intend to.
doitright said:
It is technically incorrect for the phone to accept more than 1 amp on a 5v charger. The quick charge *protocol* negotiates a non-standard charge voltage (up to 12 volts!!!). Quick charge is actually BAD FOR YOUR BATTERY! The higher the current, the greater the temperature. The greater the temperature, the lower the battery life.
Unless you *need* it to charge that fast in an emergency, don't.
I've never even plugged in the charger that came with mine, and I don't intend to.
Click to expand...
Click to collapse
I've used QC 2.0 since I bought my phone during long days and my battery life is just fine. My battery is cooler during QC than when using qi charging so I disagree. Generally speaking you're correct, however the battery would need to get hot and stay hot which is doesn't. QC 2.0 tapers off the voltage and current overtime to a more "normal" amount. Your argument is an old and doesn't always pertain unless your phone is constantly hot.
You're battery degrades overtime anyway and any heat could speed that up. I used to live in AZ where it gets to 120+[°F] in the summer which is hotter than my battery ever gets even using QC from 1% battery. Quick charging won't hurt your battery any more than normally charging it will. There is a cut off for the temperature it will let your battery get before it drops voltage or amperage which will work whether the what is from charging or the environment you are in. As I stated above qi charging will make your battery heat up more (in my case it does) I will post screenshots to back that up if you would like.
Lastly no one is expecting a battery to last 1-2 years without losing capacity so why worry about it? Your phone is warrantied for at least 1 year (I have moto care on top of the regular warranty) which will cover any battery issues. There's no need to panic or make an issue out of nothing.
Now can we please let this argument die? I keep seeing it and its getting rather old. Even if it does (which I'm not saying it does) degrade slightly faster its not a big deal for the aforementioned reasons. Let's get back on topic here people
I've been using my HTC Rapid Charger Quick Charge 2.0 with my new Sony Xperia Z2 Tablet and it charges in just under 3 hours for a 0 to 100% charge.
Not sure what the standard charge time is with the stock charger, since I haven't even taken it out of the box Just easier for me to use the same charge and cable to charge both my phone and tablet. Has anyone else measured that?
My HTC One M8 usually gets quite hot during quick charging, but didn't notice the same thing with the Z2. It only went up to around 35 degrees at the highest, for a short while.
I need 4.5 hours with stock charger (15% to 100%).
charge
So 2.0 quick charging is working?
Do you really get 60% in first 30 minutes with HTC charger?
Yes, it's listed here:
https://www.qualcomm.com/products/snapdragon/devices/all?feature=Quick Charge 2.0
Does anybody know where to buy a quickcharge 2.0 charger with a euro plug?
AleksNY said:
So 2.0 quick charging is working?
Do you really get 60% in first 30 minutes with HTC charger?
Click to expand...
Click to collapse
No, those 60% in 30 mins is claimed with a much smaller phone battery..not with our 6000 mAh tablet battery. On my HTC One M8, it gets to about 50% in 30 mins.
madsb said:
Does anybody know where to buy a quickcharge 2.0 charger with a euro plug?
Click to expand...
Click to collapse
Are you from Denmark? I bought mine from here: http://www.mytrendyphone.dk/shop/htc-tc-p1000-164522p.html
Not the cheapest option, but the only one with euro plug that i could find.
got official answer:
Thank you for contacting Sony Xperia Support.
To be able to utilise the Qualcomm Quick Charge 2.0 technology, the smartphone or tablet as well as the charger need to support Quick Charge 2.0. If you want to use a magnetic charging dock, this must also support Quick Charge 2.0.
Currently, there are no original Sony chargers that support the Qualcomm Quick Charge 2.0 technology. This means that, at present, you cannot charge Xperia™ devices using original Sony chargers utilising Qualcomm Quick Charge 2.0.
However, some Xperia™ devices and magnetic charging docks are prepared for and support the Qualcomm Quick Charge 2.0 technology. Again, as there is currently no original Sony charger that supports Quick charge 2.0, these devices cannot utilise Quick Charge 2.0 using an original Sony charger.
Regarding the charge time, according to our environmental declaration a full charge takes 5.8 hours while the tablet is turned off.
Click to expand...
Click to collapse
AleksNY said:
got official answer:
Click to expand...
Click to collapse
Wow, a normal full charge takes 5.8 hours? Even with tablet off..that sounds a bit crazy. Then im definitely glad i'm using the Quickcharger and getting it done in half that time..even with the tablet powered on.
As for the magnetic charger, it has been confirmed in other Xperia forums that Sony's dock and magnet supports Quickcharging, but most 3rd party ones don't. I'm using some cheap magnetic connector from eBay, and it charges quite slow (and half the times the magnet doesn't even keep it connected and it keeps falling off )
from my experience tablet charges in 4 hours (even if it`s turned on, from original SOny charger 1.5A 5V), from 20-30% to full. So this estimation is correct.
Anyone can recommend a good ansd cheap charger that support QC 2.0 or there already some thread about this on XDA somewhere?
AleksNY said:
from my experience tablet charges in 4 hours (even if it`s turned on, from original SOny charger 1.5A 5V), from 20-30% to full. So this estimation is correct.
Anyone can recommend a good ansd cheap charger that support QC 2.0 or there already some thread about this on XDA somewhere?
Click to expand...
Click to collapse
Not sure where you are from but there are several good and cheap ones on Amazon:
http://www.amazon.com/gp/product/B00OVD3FEU/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
http://www.amazon.com/Qualcomm-Cert...obile_desktop?ie=UTF8&*Version*=1&*entries*=0
There is not really any difference between all of them, as long as they are certified by Qualcomm to work with QC 2.0.
There's a list of all certified chargers on this page: https://www.qualcomm.com/products/snapdragon/quick-charge
and here is an especial cheap offer http://www.androidauthority.com/quick-charge-explained-563838/
So... do ALL z2 Tablets support QuickCharge 2.0 ? Because only the Japanese Z2 Phone supports Quickcharge!
Cool.
My quick charger that came with my samsung galaxy s6 initiates rapid charging on my z2 table, it even says rapidly charging when I plug it in
Sent from my SM-G920F using XDA-Developers mobile app
---------- Post added at 08:16 AM ---------- Previous post was at 08:15 AM ----------
Haldi4803 said:
and here is an especial cheap offer http://www.androidauthority.com/quick-charge-explained-563838/
So... do ALL z2 Tablets support QuickCharge 2.0 ? Because only the Japanese Z2 Phone supports Quickcharge!
Click to expand...
Click to collapse
I'm from the UK, I have a UK model and it quick charges fine with my samsung galaxy s6 charger which is a higher rated charger
Sent from my SM-G920F using XDA-Developers mobile app
WHat is a good wireless charger for the Edge phone? I prefer not to alway connect with the cable......
Choetech has a few fast wireless chargers listed on Amazon.
1: Single Coil - Pad-type
2: Single Coil - Circle-type with Smart Lighting
3: 3 Coils - Pad-type with Smart Lighting
I was researching this yesterday. What you have to remember about wireless pads is that typically a 2.0 pad will charge similar to a Non fast Charge 2 plugin-in charger. So like a standard charger. Once 3.0 ones are out I assume it will be a similar scenario. Hopefully some day down the line they will be just as fast as their plugin counterparts.
As far as those links above, 10w max isn't very strong considering a plugin 3.0 is about 18w and even a 2.0 is 15w. So 10 watt seems pretty dinky for a wireless still. Still I guess better than the old 5 watt ones.
Tronsmart is making a fast charging capable qi charger which should be nice. I used to have a TYLT VU (angled qi charger) for my Nexus 6 that as great. I would buy an angled one because it's easier to see your phone on and impossible to not have it charge.
Sent from my Nexus 6P using XDA Labs
xgman said:
As far as those links above, 10w max isn't very strong considering a plugin 3.0 is about 18w and even a 2.0 is 15w. So 10 watt seems pretty dinky for a wireless still. Still I guess better than the old 5 watt ones.
Click to expand...
Click to collapse
After some more digging I found this: Nekteck Wireless Charging Pad (18w QC 2.0 Adaptive)
Looks very promising; 18w, slightly tilted instead of laying down flat, smart lighting.
Bjray said:
After some more digging I found this: Nekteck Wireless Charging Pad (18w QC 2.0 Adaptive)
Looks very promising; 18w, slightly tilted instead of laying down flat, smart lighting.
Click to expand...
Click to collapse
It does look nice, but it is just the pad, correct, you still need to use your own samsung charger?
ScottBroker said:
It does look nice, but it is just the pad, correct, you still need to use your own samsung charger?
Click to expand...
Click to collapse
Correct. You can also buy a "QC 2.0 Adaptive Fast Charger" like this.
please use the Samsung original or certified third-party 18W QC 2.0 adapter as its power source.
Already got one on order so maybe will get this too. Keep in mind that still this will NOT charge as fast as a 3.0 18w direct plug. Not sure why that ends up being the case, but that is what I have read.
BUT::: Lower down on the order page it say:
"Fast Charge Model(10W Output Max) ONLY "
So does that mean if you have an 18w source it still only delivers 10w to the phone? Seems hardly worth it. I sent them an inquiry about this. (it's not listed on their website)
Bjray said:
After some more digging I found this: Nekteck Wireless Charging Pad (18w QC 2.0 Adaptive)
Looks very promising; 18w, slightly tilted instead of laying down flat, smart lighting.
Click to expand...
Click to collapse
I received that charger 3 days ago.
I can not test it on the S7 just yet of course, however I have tested it on other phones and it does charge faster than a standard Qi wireless charger does.
I will post up some information about this charger, and the Cheotech 10w circle fast charger that I have also, as soon as the phones arrive.
xgman said:
please use the Samsung original or certified third-party 18W QC 2.0 adapter as its power source.
Already got one on order so maybe will get this too. Keep in mind that still this will NOT charge as fast as a 3.0 18w direct plug. Not sure why that ends up being the case, but that is what I have read.
BUT::: Lower down on the order page it say:
"Fast Charge Model(10W Output Max) ONLY "
So does that mean if you have an 18w source it still only delivers 10w to the phone? Seems hardly worth it. I sent them an inquiry about this. (it's not listed on their website)
Click to expand...
Click to collapse
A lot of energy is lot due to inefficiencies as heat while charging.
Sent from my Nexus 6P using XDA Labs
Milimbar said:
I received that charger 3 days ago.
I can not test it on the S7 just yet of course, however I have tested it on other phones and it does charge faster than a standard Qi wireless charger does.
I will post up some information about this charger, and the Cheotech 10w circle fast charger that I have also, as soon as the phones arrive.
Click to expand...
Click to collapse
if you could do a compare with the plug-in 2.0 charger, that would be great.
Hi guys, I'm new to wireless charging, and I'm a bit confused as to which wireless fast charger I should buy for the S7...is there anything different about the wireless charging on the S7 than the S6, Note 5, etc.? Are there new chargers coming out soon that are somehow better than the ones currently on the market? I'm just wondering which charging pads would give me the fastest charge. If anyone could shed some light on this for me, that'd be helpful
Here is what i got for our Note 5's, my wife and I both have one. They have worked great so far. You need to use your Samsung fast charging adapter with it. For $19.99 I could not be happier.
http://smile.amazon.com/gp/product/B015XF17VM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
kxhaz said:
Here is what i got for our Note 5's, my wife and I both have one. They have worked great so far. You need to use your Samsung fast charging adapter with it. For $19.99 I could not be happier.
http://smile.amazon.com/gp/product/B015XF17VM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Click to expand...
Click to collapse
These so called fast charge wireless models are all over the place with specs. I'd wait for the newer crop to be out and tested.
My Choetech fast wireless charging pad still works great so far. I will recommend Cho
jtw_111 said:
Hi guys, I'm new to wireless charging, and I'm a bit confused as to which wireless fast charger I should buy for the S7...is there anything different about the wireless charging on the S7 than the S6, Note 5, etc.? Are there new chargers coming out soon that are somehow better than the ones currently on the market? I'm just wondering which charging pads would give me the fastest charge. If anyone could shed some light on this for me, that'd be helpful
Click to expand...
Click to collapse
My Choetech fast wireless charging pad still works great so far. I will recommend Choetech. Very stable and warm slightly. They have many kinds of wireless chargers, which has lots of good feedbacks on Amazon. :good:
Well now that there is a report that the s7 and s7e do not support quick charge 3.0 (sad) I'm not sure what's what.
I have this one: www.amazon.com/Wireless-Charging-Pad-CHOE-Qi-Enabled-Adaptive/dp/B016DAFUGY
Works REALLY well for me, charges a lot faster than the old Nokia DT-900 pads I have scattered around the house. Choetech is sending me their newest model to test, so I'll have a writeup for it here soon. Maybe a week or so?
entropism said:
I have this one: www.amazon.com/Wireless-Charging-Pad-CHOE-Qi-Enabled-Adaptive/dp/B016DAFUGY
Works REALLY well for me, charges a lot faster than the old Nokia DT-900 pads I have scattered around the house. Choetech is sending me their newest model to test, so I'll have a writeup for it here soon. Maybe a week or so?
Click to expand...
Click to collapse
That looks like a good one. I have a pad already, If I use one of the new power supplies will the charge fast, or need to upgrade the pad????
You'll need to use a Quickcharge 2.0 plug, to have it fast charge. It's not going to go any faster if you use a QC 3.0 unit though.
This is what I have now
I am looking for a fast wireless car charging dock. I recently purchased this http://tinyurl.com/zowq69q but it does not fast wireless charge my Verizon S7 Edge. I found that while using apps like Waze when the GPS is on the battery was still draining and the phone got very hot.
Looking to see if anyone has had any luck getting fast wireless charging to work with a car dock and the S7.
How are you powering it? I believe you'll need something like options below:
http://www.amazon.com/CC-T5-Qualcom..._UL160_SR160,160_&refRID=1WHENEH3NK5YPK0XGX14
or this:
http://www.amazon.com/Aukey-CC-T6-C...&redirect=true&ref_=oh_aui_detailpage_o00_s00
Or this:
http://www.amazon.com/dp/B019OSX8UC?psc=1
There are some very cool approaches to wireless charging mounts here...
http://forum.xda-developers.com/s7-edge/accessories/modded-wireless-pad-magnets-to-create-t3329613
Redflea said:
How are you powering it? I believe you'll need something like options below:
http://www.amazon.com/CC-T5-Qualcom..._UL160_SR160,160_&refRID=1WHENEH3NK5YPK0XGX14
or this:
http://www.amazon.com/Aukey-CC-T6-C...&redirect=true&ref_=oh_aui_detailpage_o00_s00
Or this:
http://www.amazon.com/dp/B019OSX8UC?psc=1
There are some very cool approaches to wireless charging mounts here...
http://forum.xda-developers.com/s7-edge/accessories/modded-wireless-pad-magnets-to-create-t3329613
Click to expand...
Click to collapse
I was using this to power the charger:
http://www.amazon.com/gp/product/B00XU0GONO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
raidflex said:
I was using this to power the charger:
http://www.amazon.com/gp/product/B00XU0GONO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Click to expand...
Click to collapse
AFAIK, that should do it...maybe you need to confirm fast charging status via a method where you measure he actual charging level.
Redflea said:
AFAIK, that should do it...maybe you need to confirm fast charging status via a method where you measure he actual charging level.
Click to expand...
Click to collapse
The only way to accurately read the input rate into the wireless charger is with a USB multimeter. The S7/S7E will lost about 30-50% of the input current the moment you turn the display on regardless of the charging method. In this case the input should be ~9V/2A or 12V/1.5A (both 18W) in theory. If the charger was pulling via 5V instead there would be a lot more heat, and it might cause some issues if the cable has a higher resistance.
Pilz said:
The only way to accurately read the input rate into the wireless charger is with a USB multimeter. The S7/S7E will lost about 30-50% of the input current the moment you turn the display on regardless of the charging method. In this case the input should be ~9V/2A or 12V/1.5A (both 18W) in theory. If the charger was pulling via 5V instead there would be a lot more heat, and it might cause some issues if the cable has a higher resistance.
Click to expand...
Click to collapse
I was thinking of trying different cables.
I was using these cables because I wanted something longer:
http://www.amazon.com/gp/product/B018IAXUAA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It does say they are rated for QC 2.0 and up to 2.5A so I am not sure.
raidflex said:
I was thinking of trying different cables.
I was using these cables because I wanted something longer:
http://www.amazon.com/gp/product/B018IAXUAA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It does say they are rated for QC 2.0 and up to 2.5A so I am not sure.
Click to expand...
Click to collapse
They do work for QC 2.0, I have a ton of them that I use daily. The 6ft ones are good for that extra reach on my nightstand
So, does S7E benefit from Quickcharge 3.0? I know smartphone and tablet manufacturers need to implement the specific circuitry required to make full use of the fastest charging speeds available.
Onyok said:
So, does S7E benefit from Quickcharge 3.0? I know smartphone and tablet manufacturers need to implement the specific circuitry required to make full use of the fastest charging speeds available.
Click to expand...
Click to collapse
AFAIK, nope, since it doesn't support it.
Sent from my SM-G935V using Tapatalk
Redflea said:
AFAIK, nope, since it doesn't support it.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I've thought so. Then how silly of Samsung not to implement it. Since LG's G5, for example, also uses the latest Snapdragon 820 processor and supports Quick Charge 3.0.
Onyok said:
I've thought so. Then how silly of Samsung not to implement it. Since LG's G5, for example, also uses the latest Snapdragon 820 processor and supports Quick Charge 3.0.
Click to expand...
Click to collapse
It's still quite fast regardless of it being an 'old' standard. Maybe there will be a wya to enable it via root unless there's a hardware controller that is holding it back.
Yes, but what i've gathered 3.0 is more of efficiency over speed. Hopefully, an update would do the trick. Not unless, like you said, it's about a hardware thing...
Onyok said:
Yes, but what i've gathered 3.0 is more of efficiency over speed. Hopefully, an update would do the trick. Not unless, like you said, it's about a hardware thing...
Click to expand...
Click to collapse
It is if there's support for that standard. It allows you to ste up/down voltage more granularly so that's why
So I tried the original cable that came with the phone and still the battery drops, even with the screen on and GPS off. I may just have a defective unit. I did browse through some of the reviews on Amazon and it seems there was mixed results with the S7, some people were also having issues with fast charge not working.
According to the first note on the item:
Note: For normal charging use any car USB but for faster charging you will need QC 2.0 Car USB like this one - http://www.amazon.com/dp/B01A54EAHE. You can get 10% off by buying both together and using code MNBXDSUK at checkout.
The only reason why the American version of this handset does not support 3.0 is because the Exynos international equivalent does not support 3.0 so rather than create two sets of charges Samsung decided to make 2.0 the standard and not make the international handset owners feel jealous or a certain kind of way. Remember it's a feature offered by Qualcomm and not Exynos chips.
sanjay228 said:
According to the first note on the item:
Note: For normal charging use any car USB but for faster charging you will need QC 2.0 Car USB like this one - http://www.amazon.com/dp/B01A54EAHE. You can get 10% off by buying both together and using code MNBXDSUK at checkout.
Click to expand...
Click to collapse
Well I did buy a QC 2.0 adapter, but maybe it only works with their adapter. I figured any QC 2.0/3.0 adapter would work.
raidflex said:
I am looking for a fast wireless car charging dock. I recently purchased this http://tinyurl.com/zowq69q but it does not fast wireless charge my Verizon S7 Edge. I found that while using apps like Waze when the GPS is on the battery was still draining and the phone got very hot.
Looking to see if anyone has had any luck getting fast wireless charging to work with a car dock and the S7.
Click to expand...
Click to collapse
Can you post pics of the back of the charger? I see it has a ball mount but I'd like to see if that might be removable and Imight be amps compatible or modified for my existing mount
Sent from my SM-G935V using Tapatalk
Fast charging is not enabled when the screen is on.
mvpulsts said:
Can you post pics of the back of the charger? I see it has a ball mount but I'd like to see if that might be removable and Imight be amps compatible or modified for my existing mount
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I will post pics in the next day or two.
MrDerrickC said:
Fast charging is not enabled when the screen is on.
Click to expand...
Click to collapse
After messing around with the placement of the phone on the charger it seems to now be working. I was able to run waze, bluetooth and stream audio and the battery climbed and held at 100%. Also I noticed the phone did not get as hot. You have to get the phone in just the right place with this charger it seems. I have an older regular wireless charger on my night stand and do no have any issues.