Database Develop

Best Case *SO FAR* :)

After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.

iamsupreme said:
After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.
Click to expand...
Click to collapse
Nice! Any negatives that you can tell aside from price?

brianbrain said:
Nice! Any negatives that you can tell aside from price?
Click to expand...
Click to collapse
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.

This case looks really nice. I personally want a colored case though and not the standard brown/black. Also, I'd rather pay a bit more for a case that I really like and thats going to last me a while then buy a cheap case that I'm not that into, deciding that Im not satisfied with it and having to buy more. So if I see something that I fall in love with then I don't mind pulling the trigger as long as its not 100+

iamsupreme said:
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.
Click to expand...
Click to collapse
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.

brianbrain said:
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.
Click to expand...
Click to collapse
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!

are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged

iamsupreme said:
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!
Click to expand...
Click to collapse
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:

darthchilli said:
are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged
Click to expand...
Click to collapse
I just pulled the edges on the 4 rubber ends out slightly, if that makes sense, and when the tablet was in place, they wrapped perfectly around each corner of the tablet. It takes a tiny bit of "fitting", but once it's on, it's all good.

brianbrain said:
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:
Click to expand...
Click to collapse
I had to bring it to work! It definitely is my new baby. Tethered 4G connection from my Galaxy Nexus Streaming music while getting my work on.

Sexy! The case too!
Thanks for sharing, that case looks made to order on the Nexus 7. :good:

How about the speaker in the back, is it covered or are there holes for it?

There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app

iamsupreme said:
There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
A decimeter is 10 centimeters...

mewantnexus7 said:
A decimeter is 10 centimeters...
Click to expand...
Click to collapse
Okay. My point is that it's less than a centimeter. Maybe a millimeter or so. Enough tiny space to actually amplify the sound
Sent from my Nexus 7 using xda app-developers app

rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.

qpqpqp said:
rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.
Click to expand...
Click to collapse
Link? Cause I haven't seen any. All those cheap amazon cases look cheap and tacky IMO.

http://www.amazon.com/gp/aw/d/B0083...4&linkCode=as4&ref_=as_li_ss_til&tag=noref-20
i bought this elcheapo case for now, at least they have 2 day prime shipping

This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.

masterofmayhem said:
This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.
Click to expand...
Click to collapse
People on other threads have been linking to Cases listed on Amazon and Ebay with that very similar look (they probably all use the same stock photos) with prices ranging from $10 to $20. Even cheaper.
http://www.amazon.com/MoKo-Slim-fit...?s=electronics&ie=UTF8&qid=1342489646&sr=1-12
http://www.amazon.com/i-Blason-Google-Tablet-Leather-Orange/dp/B008H3PAP2/ref=reg_hu-rd_add_1_dp
http://www.amazon.com/Poetic-HardBa...turer/dp/B008IEGS9W/ref=sr_1_24?s=electronics
I don't know, may be not the same quality but it's hard to judge from photos, or even the prizes.
Only way to judge is hand-on experience like the OP's case, his case looks good also because when the back holds on to four corners only, whereas these ones are a bit 'uneven' (when viewed in portrait mode) : p
I would perfer something that holds on to the edges of Nexus 7 only, like the Official Case or this:
http://www.amazon.com/MoKo-Folding-...ction/dp/B007SA0F7S/ref=sr_1_22?s=electronics

Poetic Slimline for Nook HD

Just purchased and received the Poetic Slimline case for the Nook HD. Here is the link: http://www.amazon.com/Poetic-SLIMLI...804667&sr=8-2&keywords=nook+hd+7"+poetic+case
Currently the case is just $6.95 with free shipping. Current as of 2/13/2013
The case has has a plastic base that clips on over the body of the Nook HD. This helps to make the fit very snug while adding very little to the depth of the device. There are cut outs for the volume rocker, headphone jack and for the power button. The bottom of the case is left mostly open for access to the micro sdcard, proprietary port and the LED light hole. There are also two holes for the speakers on the back.
The plastic case is covered with a faux leather type material. This allows for a relatively tacky area so the device will not slip out of your hand. This material also covers the front of the device protecting the screen of the Nook HD. On the inside of the front cover is a soft velvet like material that is nice and soft preventing scratches on the screen. The front cover can also be tri-folded behind the device to act as a stand for the tablet. This occurs in landscape mode allowing for a decent angle to watch movies or other videos. It does not provide any support in the portrait mode though so it will not help with reading books.
The front cover clicks in to place with the back plastic via magnets. This helps to secure the cover so that it does not flop open. It also provides for a way to turn your Nook HD on and off when opening or closing the case. This is a great feature that will actually bypass the normal lock screen so that when you finish opening the case your device is on and ready to go. However, if you enable the password lock screen then you will still need to unlock and then type in your code.
This case comes with a 3 year warranty from Poetic which is very unusual for cases but is a great feature to have.
One con I found in this device after its arrival was that there were some threads coming out from between the two material types on the front cover of the case. This were easily clipped to make things look better but it does take away from the idea of the case being of top quality. My only other concern is how well the materials will hold up while using the front cover as a stand. If used very frequently it could lead to cracking of the front cover. However, I will only be able to tell that over time and not for the day that I have had the case so far.
So far I am very impressed with the Poetic Slimline case for the Nook HD. I recommend anyone looking for a nice slim case to pick one up.
4.5 out of 5 stars.
Some more pictures in post # 4.

blazingwolf said:
The case has has a plastic base that clips on over the body of the Nook HD. This helps to make the fit very snug while adding very little to the depth of the device. There are cut outs for the volume rocker, headphone jack and for the power button. The bottom of the case is left mostly open for access to the micro sdcard, proprietary port and the LED light hole. There are also two holes for the speakers on the back.
Click to expand...
Click to collapse
Maybe some closer and illustrative photos?

datas0ft said:
Maybe some closer and illustrative photos?
Click to expand...
Click to collapse
Yep. Hope to get to them today.

Pictures added. Some in the first post and the rest here.

blazingwolf said:
Pictures added. Some in the first post and the rest here.
Click to expand...
Click to collapse
Looks really good. Thanks for the pics!

I liked the ceiling design and lighting

This looks great. Exactly what i have been looking for on HD+. this is avilable also for HD+ at $8.95.
Poetic likes to throw out introductory prices and then increase it once it gets popular, so i would order now it you want one, even if it is not available for another 1-2 weeks, for the prices may increase by then.

Tarthenal said:
Looks really good. Thanks for the pics!
Click to expand...
Click to collapse
It does fit the device well.

datas0ft said:
I liked the ceiling design and lighting
Click to expand...
Click to collapse
Better that than me in the picture.

Did i forgot mention you?!? I know why ... I just dont like any case on mob/tab and etc devices. Only acceptable are film skins which ones give a sense of the real item.

Questions: I had a Poetic portfolio case, had one dumb thing, pen holder on the back surface. Is there one on this? Also, I like to be able to stand it up in portrait mode for reading, but I think this one only stands in landscape, right?
Thanks

dbh369 said:
Questions: I had a Poetic portfolio case, had one dumb thing, pen holder on the back surface. Is there one on this? Also, I like to be able to stand it up in portrait mode for reading, but I think this one only stands in landscape, right?
Thanks
Click to expand...
Click to collapse
There is nothing on the back. So no worries there.
This case is not designed for portrait use. It might stand straight up in portrait but it won't be very stable and there is no way to change the angle.
Sent from my BNTV400 using Tapatalk HD

blazingwolf said:
There is nothing on the back. So no worries there.
This case is not designed for portrait use. It might stand straight up in portrait but it won't be very stable and there is no way to change the angle.
Sent from my BNTV400 using Tapatalk HD
Click to expand...
Click to collapse
Far and away the best commercial case I've had for a tablet flavored device. And half the cost of the nearest competitor in the
'decent case' catetory, and that one was for a 5" Samsung media player.
I get the impression that these are from a maker who also makes iPad cases and uses many of the same materials. The front has three
longitudinal strips of material - but the third is narrower than the first two. I'll compare it to a smart cover tomorrow - my memory is
that that cover has three bands of equal-breadth material on the front
The fit in the rear is good as delivered, but may start to loosen up over time, and doesn't have a cutout to match the grommet
in the corner. I may add a cutout (I have a grommet setter for fabric) and then use a shoelace or similar to fasten down the back
on that side. That could also get me a loop for a stylus, which would be useful to me. The fit across the front is a little too
long and a little too wide, which will annoy me over time or I may get used to it.
The cover activates the wake from sleep in CM10. The device sleeps itself after a minute by default, which is fine with me.
All in all, 8 out of 10.

superflysocal said:
This looks great. Exactly what i have been looking for on HD+. this is avilable also for HD+ at $8.95.
Poetic likes to throw out introductory prices and then increase it once it gets popular, so i would order now it you want one, even if it is not available for another 1-2 weeks, for the prices may increase by then.
Click to expand...
Click to collapse
I knew prices would go up. It is now $19 for hd+ and $17 for HD. Those who got in at intro price got themselves a great case (myself included). It is exactly what i have been loking for.

superflysocal said:
I knew prices would go up. It is now $19 for hd+ and $17 for HD. Those who got in at intro price got themselves a great case (myself included). It is exactly what i have been loking for.
Click to expand...
Click to collapse
Glad I got it when I did then.

As long as you're OK with black, those are still at 8.95.

roustabout said:
As long as you're OK with black, those are still at 8.95.
Click to expand...
Click to collapse
i think i got the last 8.95 one as after i ordered, the price jumped to 12.95. maybe it's back down now, haven't checked.
anyway after about a week of use, i like the case for the price but have some minor quibbles. the case is a bit creased/folded on the edges when it shipped, so it doesn't perfectly conform to the shape of the HD+. maybe over time it will smooth out.
the stand notch is not very solid and i've had it slip when i'm moving around, not sure if that's standard for case stands. also the "hand strap" is kind of hard to pull out, but i mostly use it in landscape mode so not a big deal.
like i said not a big deal especially for the price, but not a perfect case.

snowlarbear said:
the stand notch is not very solid and i've had it slip when i'm moving around, not sure if that's standard for case stands. also the "hand strap" is kind of hard to pull out, but i mostly use it in landscape mode so not a big deal.
Click to expand...
Click to collapse
I think we're talking different covers here. I thnk your cover is the "Poetic slimbook", not the "Slimline". Still good to hear you views on it!

32.4 arburnc
Thanks for the tip. Now $15 for the black HD+ one on Amazon. Still a decent price :cyclops:

Anyone has a hint how to order Poetic to a Europe country other than UK at a low price?
I can order at amazon.co.uk for 20GBP + 6GBP shipping (= 40 USD) which seems a bit high compared to 6 GBP price on UK Ebay (but from where I can't get it shipped to Slovenia).

Xperia Z2 Tablet Cases

Hey guys, here's a case I recently ordered which looks quite nice. Nothing fancy, but it looks slim enough to do this tablet justice! If anyone has seen anything else out there, please share!
https://www.krusellcases.com/uk/p_krusell_product.aspx?i=259284

It would be nice if you post a few photos and your opinion once you've received it.
Sent from my SGP512 using Tapatalk

Gnopps said:
It would be nice if you post a few photos and your opinion once you've received it.
Sent from my SGP512 using Tapatalk
Click to expand...
Click to collapse
Yep, will do!

So my Krusell Malmö Tablet Case just arrived. I have had several cases for various tablets and phones in the past and this is probably one of the better ones I've had. I always have a case for my phone/tablet because I want to keep my devices in the best condition possible but unfortunately, it also covers up their original appearance. Good thing about this case is that when open, it still exposes the majority of the tablet allowing you to show off how thin the tablet is to your friends without having to take the tablet out
The buttons are all exposed as are the ports except for the MicroSD card port (and I guess also the SIM port for the 4G owners), but then again, I doubt you'd need to remove it that often.
The tablet wedges itself tightly into the two corner brackets on the upper and bottom right side of the case (when portrait). The fit is very tight so you won't need to worry about the tablet falling out.
It also allows two different standing modes. You can either fold the cover backwards similar to the iPad cover:
or you can lay the cover flat on the table:
I prefer the second option because it feels a bit more stable and there are many more angle possibilities. You won't need to worry about the tablet sliding because the inside of the cover will provide enough resistance. Speaking of which, the inside of this cover feels really nice and velvety and will help keep your screen in great condition.
It also wakes/locks the tablet when you open and close it. Overall, I am very satisfied with this case. It's pretty much as thin as they come but still very sturdy and solid at the same time. Highly recommended! By the way, the pictures make it look a little grey but I can assure you that the case is as black as the tablet
https://www.krusellcases.com/uk/p_krusell_product.aspx?i=259284

I wonder how this compares to the one from Sony, since they are the same price

PsyMonkey said:
I wonder how this compares to the one from Sony, since they are the same price
Click to expand...
Click to collapse
This one is actually about 9 pounds cheaper But yeah, it would be nice to have a comparison. I think they both perform all the same functions (stand angles, magnetic cover) so it would be a close match.

marcolorenzo said:
This one is actually about 9 pounds cheaper But yeah, it would be nice to have a comparison. I think they both perform all the same functions (stand angles, magnetic cover) so it would be a close match.
Click to expand...
Click to collapse
Looking at the pictures, so only my assumption which can be wrong, it looks like the Krusell case folds a little bit over the front of the screen where the Sony Office does not seem to do that as much.

PsyMonkey said:
Looking at the pictures, so only my assumption which can be wrong, it looks like the Krusell case folds a little bit over the front of the screen where the Sony Office does not seem to do that as much.
Click to expand...
Click to collapse
Do you mean the brackets holding the tablet in place covers up more of the bezel than the Sony Cover? You're probably right about that. The Sony one looks like it's clicked into the four corners whereas the Krusell one is wedged into two corner brackets. It's really minimal though and doesn't cover the screen up at all and I hardly notice it.
EDIT: A friend of mine just bought the official case and it seems that the Krusell one is a tiny bit thinner. The reason for this I think is because the official Sony one basically has an extra inner layer underneath the tablet (which allows it to have 4 corner attachment points compared to Krusell's two). Not sure if I'm making any sense But if you look at my pictures, you'll see that when standing, the bottom of the tablet is resting against nothing whereas the official Sony one is resting against another layer. Wish I took some pictures...we were too busy Shadowgun

Has anyone got any of these generic dot view cases?

Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.

200
lsv-1 said:
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
Click to expand...
Click to collapse
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out

ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter

ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
Guess what bro, those aren't genuine either even if they say so. If you look at the pics you'll notice that some don't have the htc logo
I have the genuine gray, I bought it when I've got the phone, but I'm curious about the quality of the ones they're selling for $8, that's it.
To be honest they look exactly the same but I would like a closer look. Sellers in Amazon claim that they're identical to the genuine with the exception of the logo.

Bierce22 said:
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
Click to expand...
Click to collapse
I always stay away from unbranded stuff, but these called my attention because they look identical and there are more colors available

Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app

Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using

I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.

henderjr said:
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
Click to expand...
Click to collapse
They are the same in quality! :good: That's what I thought.

bandjosh said:
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
Click to expand...
Click to collapse
Share the link or pics please!

GalaxyNotesTx said:
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Don't use one of these cases for protection period. I can almost state with certainty that if you drop your phone on any kind of solid surface, it will definitely come flying out of these cases. In fact, if you clumsily open the case to fast the device will come flying out sometimes. That is in the original from Verizon. They offer some screen protection while in pockets or bags, but little to no drop protection & even in bags, the top & bottom of the device is not protected from scratches.

It was a little more than I remembered but it's 13$ http://www.ebay.com/itm/221503424128?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The pictures are of mine.
Beyond that I agree with the post above mine, the dot view case is very functional as an accessory but as a protector it's useless it pops out so easily.
Sent from my HTC One_M8

I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.

I had the fake one with logo and the real deal case I got from a Verizon store. Felt the fake with the logo was just as good. So went to return the real deal case at Verizon. Turns out I mistakenly packaged the fake one and returned that one to Verizon(honest mistake). I had no idea until later when I took my One out of my csndyshell case and popped it in the dot view....So while I didn't mean to do that, I ended up with the real deal case. But honestly the fake one closed better than the real one. That is how close they are.

I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.

I had an authentic one, and then recently bought one of those non-authentic ones.
As a direct comparison, they both look the same, but the quality is different. particularly, the dots' translucent level is very uneven, so you'll get random brighter vs darker patches
on the authentic one, all dots have consistent translucency

OME or Knock-off, I wish that someone would come out with one that snaps on decently (even if it used double-sided tape) and maybe wrapped in leather. The plastic makes the phone feel so cheap! I had the original. I have since misplaced it since I got a cheap otterbox knock off for now. Does the job, but I do miss the DotView for the cool factor.

theandies said:
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
Click to expand...
Click to collapse
I have an OEM Dot View case and love it. I spent about $15 for it on Amazon. HTC also updated Dot View to add more functionality. And I was surprised yesterday by the Halloween animations. I'm very impressed by it and glad I got it.

SoI received my case today in the mail and here are my findings:
1. The case closes just as well as the OEM one I had.
2. The plastic case itself feels a bit thinner that the OEM one but I like that since I felt the OEM one was a bit too thick and added bulk to the phone.
The "Seams are not as smooth as the OEM but I am going to try and use a nail file and see if I can't fix that my self
4. The "Springiness" of the hinge that is in the OEM is not present in this case as it was in the OEM
5. The cover does not lay flat on the back of the case when opened all the way but I think that is just due to the design of the case.
6. The case seeme to snap onto the phone as well as the OEM case did.
To me, the $8.00 I spent on this case is totally worth it. As a matter of fact, I might order myself a second one to have different colors to chose from. If you think about it, for the price of one OEM you can get 6 of these in different colors and still have $2 and change left over!
I posted some pics of the case but it's hard to see any details.
Hope this helps you guys make a choice.
RonMac said:
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
Click to expand...
Click to collapse

Early TPU Cases (Warning) [29-11-2018]

I would like to share my experience. I have bought one of the TPU cases sold online currently which almost all share the same build. The case is good but there is a downside to using it; you will not be able to use Air Triggers with it on. The device will not be able to detect your squeeze unless you have the grip of an ironman and of course detect your frame taps. The only case currently that seems suitable to use without any sacrifice is the official one by Asus which is ridiculously expensive and I don't think it's worth its price.
I think the issue here is with the phone frame touch sensitivity and not necessary the cases. Unless the case has a very very thin soft shell or a cut out i doubt any TPU case will make Air Triggers work.
Update(29-11-2018): I ordered another black case similar to the previous one( the Pics shown below) but with a cut out for the ROG logo in the back. To my surprise the case came with a cut out for the Air Triggers too( 2 cut outs in 1 side and another cut out on the other side total 3) which wasn't mentioned in the seller website.
Here is the thing though the cut outs are very small to use comfortablely( you can't use the squeeze function because of the size but you can use the tap function) what you can do to enlarge the cut out; is to cut the sides of the holes to make further touch space if you prefer to do so.
So next time you buy a similar black case make sure to confirm with the seller the existence of the cut outs. Good luck ?

Rashad83 said:
I would like to share my experience. I have bought one of the TPU cases sold online currently which almost all share the same build. The case is good but there is a downside to using it; you will not be able to use Air Triggers with it on. The device will not be able to detect your squeeze unless you have the grip of an ironman and of course detect your frame taps. The only case currently that seems suitable to use without any sacrifice is the official one by Asus which is ridiculously expensive and I don't think it's worth its price.
I think the issue here is with the phone frame touch sensitivity and not necessary the cases. Unless the case has a very very thin soft shell i doubt any TPU case will make Air Triggers work.
Click to expand...
Click to collapse
I thought the same thing and also attaching accessories which is why I unfortunately am waiting for Asus to release their case here in the US.

spoonerweb_com said:
I thought the same thing and also attaching accessories which is why I unfortunately am waiting for Asus to release their case here in the US.
Click to expand...
Click to collapse
I just received the Asus case and on the website it says it won't interfere with the accessories, however, the instructions say otherwise. The two plastic pieces that go on the ends of the phone have a sticker backing, so once you put this on, you will no longer be able to connect it to anything else. The instructions even say you won't be able to use any of the docks. And to use the aero cooler that came with the phone will require to remove the middle plastic backing which doesn't have very good tabs to begin with. Also, found it impossible to use a very thin metal plate between this case and phone in order to use magnetic holders. So, looks like I am returning mine.
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
Rashad83 said:
I would like to share my experience. I have bought one of the TPU cases sold online currently which almost all share the same build. The case is good but there is a downside to using it; you will not be able to use Air Triggers with it on. The device will not be able to detect your squeeze unless you have the grip of an ironman and of course detect your frame taps. The only case currently that seems suitable to use without any sacrifice is the official one by Asus which is ridiculously expensive and I don't think it's worth its price.
I think the issue here is with the phone frame touch sensitivity and not necessary the cases. Unless the case has a very very thin soft shell i doubt any TPU case will make Air Triggers work.
Click to expand...
Click to collapse
Would it be possible to cut out the area where the air triggers are at and/or the back to expose the logo?

spoonerweb_com said:
I just received the Asus case and on the website it says it won't interfere with the accessories, however, the instructions say otherwise. The two plastic pieces that go on the ends of the phone have a sticker backing, so once you put this on, you will no longer be able to connect it to anything else. The instructions even say you won't be able to use any of the docks. And to use the aero cooler that came with the phone will require to remove the middle plastic backing which doesn't have very good tabs to begin with. Also, found it impossible to use a very thin metal plate between this case and phone in order to use magnetic holders. So, looks like I am returning mine.
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
Would it be possible to cut out the area where the air triggers are at and/or the back to expose the logo?
Click to expand...
Click to collapse
There are cases with a cut for the logo so no worries regarding that. About the air triggers you can make cuts for them but that will render the case ugly and not worth it. I think we will need to wait a couple of months until other options are available. I think a good idea for a case would be similar to what Asus did but with better implementation; which I think will be on the way.
Regarding the squeeze function I think it's a bad implementation compared to HTC devices. My previous phone HTC U11+ had a thick TPU case and I was able to squeeze easily to trigger functions but with the ROG I don't think it's even possible or rather as easy.

Currently i think the best alternative to the official case for our device without losing features(Air Triggers working) is this:
https://www.aliexpress.com/item/For...lgo_pvid=e4e01e65-a8dc-45a2-b8e3-9ca1e99ce5c6

Rashad83 said:
Currently i think the best alternative to the official case for our device without losing features(Air Triggers working) is this:
https://www.aliexpress.com/item/For...lgo_pvid=e4e01e65-a8dc-45a2-b8e3-9ca1e99ce5c6
Click to expand...
Click to collapse
I agree, looks good! I found on amazon:
https://www.amazon.com/Redluckstar-...detailedview-20&ie=UTF8&qid=1543095427&sr=8-2

New TPU case.

Rashad83 said:
New TPU case.
Click to expand...
Click to collapse
Where did you buy it from and how many days did take to be delivered?

ermacwins said:
Where did you buy it from and how many days did take to be delivered?
Click to expand...
Click to collapse
I bought it from Taobao, the number of days it takes depends on your location mine took 3 days. You can find similar cases on Amazon too. You can check the links above.

I Just bought this One, 4€ on AliExpress ?

January will soon be over and there is still no fitting case for this phone. These AirTrigger cutouts are too low. They are simply not where they should be. Squeeze doesnt work. The Phone itself is great but the missing community and the utter lack of support from Accessoire manufacturers are significant downsides.

I just bought the transparent TPU case. I will share my final evaluation of it after using it for some time.
One of the good things about this case is you can see the Aura notification light flashing from the side when the phone is faced up. All thanks to the transparency and light reflection. So if the room is dark you will know there is a notification without turning the phone with the back facing up to know there is a notification.

Try the squeeze function. You will notice that the AirTriggers dont work. I have pretty much the same case.

I have the same case and prefer it to all the others I have tried. My air triggers work just fine.

Einheit-101 said:
Try the squeeze function. You will notice that the AirTriggers dont work. I have pretty much the same case.
Click to expand...
Click to collapse
Actually air triggers work ok for me you simply need to squeeze near the top edges of the cut outs and you also need to reduce the squeeze pressure to the minimal number. i wouldnt say they are perfect they actually needed to be positioned a little bit higher but in terms of the cut out length I would say it's sufficient.
As @spoonerweb_com stated this is currently the best case out there. I hope we get a transparent case in the future but with thicker skin for protection especially the edges.

Einheit-101 said:
Try the squeeze function. You will notice that the AirTriggers dont work. I have pretty much the same case.
Click to expand...
Click to collapse
same on my one too

I have recently received the same case (different brand though) as Rashad83. Air triggers work fine, sensibility is fine and you just need to get used to feel the edge of the case when using the triggers. I have been able to play PUBG with the Air Triggers woking fine.
I have not set up the squeeze function as I have not used it, maybe shall try it later.
Only drawback of this case is that it is not "high" enough on the phone edges, so if you put your phone screen down, the screen will touch the table-whatever it is on, so a screen protector (glass preferably) is recommended.