Related
Hi all,
i got a problem with my bluetooth phonebook sync. My phone connects via blutooth to the car, but the phone book does not sync. The request for the transfer of the phone book does not appear at all.
I have this Problem with following ROMs:
Sony Stock 4.3 (14.2.A.0.290)
IHackers 2.1 (JellyBean 4.3)
SlimKat 4.4
However, no problems with these ROMs,
Sony Stock 4.2.2 (14.1.G.2.257)
FreeXperia CM11 (fxp / kali)
What can cause this and how can I solve this problem for the other roms?
Thank you
Sony xperia Z1 C6903
Opel UHP car kit
You can flash the "Baseband" only from 14.1.G.2.257 on 14.2.A.0.290 or Update to .136. If .136 will not solve this problem then flash Baseband here too from .257.
I have the same problems with 290 and 136.. Does this mean that I can flash the 136 generic BALL ftf and then just flash the baseband from 257? It won't screw the phone up will it?
Regards,
Alan
nalab1 said:
It won't screw the phone up will it?
Click to expand...
Click to collapse
I can't guarantee that but this was confirmed by users who did that to improve the signals on they phone. They flashed baseband from 4.2.2 FW .257 on 4.3 FW .290 and it worked. Flashing anything its a risk so be careful, BTW, if this will not work you can flash the baseband from 4.3 FW .136 back, in the same way. If I am not wrong, if so someone correct me please, the baseband contain all package of frequency for the phone to work properly.
eclyptos said:
I can't guarantee that but this was confirmed by users who did that to improve the signals on they phone. They flashed baseband from 4.2.2 FW .257 on 4.3 FW .290 and it worked. Flashing anything its a risk so be careful, BTW, if this will not work you can flash the baseband from 4.3 FW .136 back, in the same way. If I am not wrong, if so someone correct me please, the baseband contain all package of frequency for the phone to work properly.
Click to expand...
Click to collapse
Hi eclyptos,
Thank you for your reply.. So, does the baseband contain all of the wireless stuff like wifi, bluetooth etc?
To get the sequence right I -
1) Completely flash .136 - reboot to check if ok
2) Flash the baseband ONLY from .257 - reboot to check if ok
If, the phone were to get stuck in say, a bootloop is there any way to completely power it off and then reflash?
Regards,
Alan
nalab1 said:
Hi eclyptos,
Thank you for your reply.. So, does the baseband contain all of the wireless stuff like wifi, bluetooth etc?
Click to expand...
Click to collapse
It should.
nalab1 said:
To get the sequence right I -
1) Completely flash .136 - reboot to check if ok
2) Flash the baseband ONLY from .257 - reboot to check if ok
Click to expand...
Click to collapse
Yes.
nalab1 said:
If, the phone were to get stuck in say, a bootloop is there any way to completely power it off and then reflash?
Regards,
Alan
Click to expand...
Click to collapse
Of curse but it will not stuck.
@chunlianghere already did this HERE and will report leater.
eclyptos said:
It should.
Yes.
Of curse but it will not stuck.
@chunlianghere already did this HERE and will report leater.
Click to expand...
Click to collapse
Hi eclyptos,
Thank you. For my information (sorry for the noobness!) if it were stuck in a bootloop how do I actually power the phone off?
Regards,
Alan
nalab1 said:
Thank you. For my information (sorry for the noobness!) if it were stuck in a bootloop how do I actually power the phone off?
Click to expand...
Click to collapse
Power + Volume Up. BTW, Flash with fully charged battery.
eclyptos said:
Power + Volume Up. BTW, Flash with fully charged battery.
Click to expand...
Click to collapse
Hi eclyptos,
Thank you for your replies and help. I am going to try this at the weekend as during the week, I work away from home and dont have access to my pc. I will let you know how it goes.
Regards,
Alan
eclyptos said:
You can flash the "Baseband" only from 14.1.G.2.257 on 14.2.A.0.290 or Update to .136. If .136 will not solve this problem then flash Baseband here too from .257.
Click to expand...
Click to collapse
I have tried this, but i did not work.
Any other advise?
Yocto69 said:
I have tried this, but i did not work.
Any other advise?
Click to expand...
Click to collapse
Are you saying that after flashing baseband from .257 on .136 you still have problems? Try downgrade the entire system and check if the problem persist. Sometime is not the phone but the other devices so really we can try looking forever.
eclyptos said:
Are you saying that after flashing baseband from .257 on .136 you still have problems? Try downgrade the entire system and check if the problem persist. Sometime is not the phone but the other devices so really we can try looking forever.
Click to expand...
Click to collapse
Look in the op. I have tried several Firmwares and Roms.
If i downgrade to. 257 It works perfect!
The other Device is not the problem.
Thx
Yocto69 said:
Look in the op. I have tried several Firmwares and Roms.
If i downgrade to. 257 It works perfect!
The other Device is not the problem.
Thx
Click to expand...
Click to collapse
Other than that can be a kernel.
eclyptos said:
Other than that can be a kernel.
Click to expand...
Click to collapse
Is it maybe possible to take a blutooth.apk from .257 and use it on .290?
Yocto69 said:
I have tried this, but i did not work.
Any other advise?
Click to expand...
Click to collapse
it works fine when listening music.
but during voice call, its not ok.
Yocto69 said:
Is it maybe possible to take a blutooth.apk from .257 and use it on .290?
Click to expand...
Click to collapse
Is not that easy. Bluetooth is not an application which you can download or install. It's implemented in the system and baseband. The main reason for bad quality like WiFi, Mobile Signal or Bluetooth is the Radio which is the Baseband in Z1. On HTC for example to improve the reception for all of them I am able to flash just the Radio.
eclyptos said:
Is not that easy. Bluetooth is not an application which you can download or install. It's implemented in the system and baseband. The main reason for bad quality like WiFi, Mobile Signal or Bluetooth is the Radio which is the Baseband in Z1. On HTC for example to improve the reception for all of them I am able to flash just the Radio.
Click to expand...
Click to collapse
Ok, i have tried severall kernel.
ihackers advanced kernel, stock kernel and doomlords kernel. All on 4.3 roms. => No change.
What else could I try?
Yocto69 said:
Ok, i have tried severall kernel.
ihackers advanced kernel, stock kernel and doomlords kernel. All on 4.3 roms. => No change.
What else could I try?
Click to expand...
Click to collapse
I losing ideas, I don't want to say but at last it may be a hardware issue but not sure. I don't know if you want to do this but you should go back to Stock and Flash a Stock FTF to check if the problem persist even there, is it does it's the phone.
Hi guys last time i flashed stock 4.2.2 build number:.67:cyclops:with flashtool but its looks have big problem every time i reboot i see i system app was updated with dameged update make the app not working when i open the app tells me (app name) stoped working i go to settings and click on app thats updated then click uninstall update some apps working normal and some not working still giving me stoped working IS THERE ANY ONE HAVE THAT IF YES GIVE ME HELP IF NOT ALSO HELP ME
Sorry for my bad EN
Now running:
Stock 4.3 no root:crying: (icant find good way)
Locked bootloader
No CWM:crying:
androidfreak70 said:
Hi guys last time i flashed stock 4.2.2 build number:.67:cyclops:with flashtool but its looks have big problem every time i reboot i see i system app was updated with dameged update make the app not working when i open the app tells me (app name) stoped working i go to settings and click on app thats updated then click uninstall update some apps working normal and some not working still giving me stoped working IS THERE ANY ONE HAVE THAT IF YES GIVE ME HELP IF NOT ALSO HELP ME
Sorry for my bad EN
Now running:
Stock 4.3 no root:crying: (icant find good way)
Locked bootloader
No CWM:crying:
Click to expand...
Click to collapse
Read forum rules, it clearly says "DO NOT POST QUESTIONS IN THE GENERAL SECTION"!
To your problem: are you running 4.2.2 or 4.3 now? In your post you say you flashed 4.2, but then you say you're running 4.3
Try to reflash a stock 4.3 ftf. This should solve your problem
St.Jimmy90 said:
Read forum rules, it clearly says "DO NOT POST QUESTIONS IN THE GENERAL SECTION"!
To your problem: are you running 4.2.2 or 4.3 now? In your post you say you flashed 4.2, but then you say you're running 4.3
Try to reflash a stock 4.3 ftf. This should solve your problem
Click to expand...
Click to collapse
Im running now 4.3
I DON'T WANT STOCK 4.3 FTF
It's bad for me the both versions are bad i want 4.2.2 the best
Do you want a custom Rom or stock 4.2? Because if you want a custom Rom you should flash 4.4....
If you want to stay with 4.2.2 reflash a stock ftf
If you downgrade, you need to wipe everything, or you may get a bootloop or errors like the ones that you're seeing.
Sent from my C6603 using Tapatalk
St.Jimmy90 said:
Do you want a custom Rom or stock 4.2? Because if you want a custom Rom you should flash 4.4....
If you want to stay with 4.2.2 reflash a stock ftf
Click to expand...
Click to collapse
Wow thank for super fast answer
I want a stock 4.2.2 but clear of bugs
androidfreak70 said:
Wow thank for super fast answer
I want a stock 4.2.2 but clear of bugs
Click to expand...
Click to collapse
Then you should download a ftf file and flash it, but don't forget to wipe as kingvortex mentioned
St.Jimmy90 said:
Then you should download a ftf file and flash it, but don't forget to wipe as kingvortex mentioned
Click to expand...
Click to collapse
I know i most wipe data when using flastool i tried upgrade from 4.2.2 to 4.3 without wiping data its worked without bootloops but the bug of my 4.2.2 now in 4.3 i flashed 4.3 again with wiping data now its fine :good:
The most thing i liked in 4.2.2 is the ROOT
Now can you give me link for a bug free 4.2.2 stock ftf? If you cant now dont do it now do it when you not busy
I googled but i didnt found clear one and i cant try every4.2.2 ftf because my internet speed slow 80kb\s
4.3 will be perfect if i ROOTED it
And i heared some one say using flashtool much may damage my CPU is that right?
androidfreak70 said:
Hi guys last time i flashed stock 4.2.2 build number:.67:cyclops:with flashtool but its looks have big problem every time i reboot i see i system app was updated with dameged update make the app not working when i open the app tells me (app name) stoped working i go to settings and click on app thats updated then click uninstall update some apps working normal and some not working still giving me stoped working IS THERE ANY ONE HAVE THAT IF YES GIVE ME HELP IF NOT ALSO HELP ME
Sorry for my bad EN
Now running:
Stock 4.3 no root:crying: (icant find good way)
Locked bootloader
No CWM:crying:
Click to expand...
Click to collapse
You can find a stock 4.2.2 .ftf file over the net or even here on xda and use the flashtool. When selecting the firmware to flash, also check the "reset customisations" option (down right) and then follow the common flashing sequence. This might fix your problem. Otherwise, use other version or pc companion or update service.
---------- Post added at 10:34 PM ---------- Previous post was at 10:31 PM ----------
androidfreak70 said:
I know i most wipe data when using flastool i tried upgrade from 4.2.2 to 4.3 without wiping data its worked without bootloops but the bug of my 4.2.2 now in 4.3 i flashed 4.3 again with wiping data now its fine :good:
The most thing i liked in 4.2.2 is the ROOT
Now can you give me link for a bug free 4.2.2 stock ftf? If you cant now dont do it now do it when you not busy
I googled but i didnt found clear one and i cant try every4.2.2 ftf because my internet speed slow 80kb\s
4.3 will be perfect if i ROOTED it
And i heared some one say using flashtool much may damage my CPU is that right?
Click to expand...
Click to collapse
If it would be so, then many people out there wouldn't flash their phones over and over again.
how to make full wipe without CWM ? Just factory reset in settings ? I'm back to 4.2.2 via flashtool but without full wipe...
|>/\nte said:
You can find a stock 4.2.2 .ftf file over the net or even here on xda and use the flashtool. When selecting the firmware to flash, also check the "reset customisations" option (down right) and then follow the common flashing sequence. This might fix your problem. Otherwise, use other version or pc companion or update service.
---------- Post added at 10:34 PM ---------- Previous post was at 10:31 PM ----------
If it would be so, then many people out there wouldn't flash their phones over and over again.
Click to expand...
Click to collapse
I flash my xperia z much because i need that u try flash my stock rom before anything else because its always fix all problems and i looks brick my phone alot:cyclops: so flashtool fix them
androidfreak70 said:
I flash my xperia z much because i need that u try flash my stock rom before anything else because its always fix all problems and i looks brick my phone alot:cyclops: so flashtool fix them
Click to expand...
Click to collapse
As soon as you have a backup of the stock firmware (which is an .ftf file in your case), you can experiment with your phone as much as you want. That's what I do anyways....
fatis said:
how to make full wipe without CWM ? Just factory reset in settings ? I'm back to 4.2.2 via flashtool but without full wipe...
Click to expand...
Click to collapse
You can do a full wipe from flashtool just tick the user data box in flashtool you can find it in right corner when select an ftf file
First of all, I've tried searching and reading tons of forums/guides the past hours, but I can't get this to work. So please excuse me if I've missed something
I'm trying to downgrade my Xperia Z1 from (the horrible) KK update 4.4.2. to my stock 4.3 JB. I've tried flashing the following FTF's:
C6903_14.2.A.1.136_Generic Nordic NCB_1276-9897.ftf
C6903_14.2.A.0.290_Customized NCB 1276-9897 (Nordic Combined).ftf
C6903_14.1.G.1.534_1276-4314_R2A.ftf
All found here!
No one works. I keep getting bootloops (I can se the startup animation, then it restarts). I manged to get my phone working with using the orginal KK FTF (C6903_14.3.A.0.681_Generic NCB 1276-9897 (Nordic).ftf).
Could somebody please help me and figure out what the problem is? I've added my Software Info as an attachment.
Thanks for any replies!
Really weird, if you flashed them correctly from Flashtool v0.9.15 they should work, check the version of your Flashtool if is correct. Also try the one (FW .534) provided by NUT for C6903, here.
eclyptos said:
Really weird, if you flashed them correctly from Flashtool v0.9.15 they should work, check the version of your Flashtool if is correct. Also try the one (FW .534) provided by NUT for C6903, here.
Click to expand...
Click to collapse
I used Flashtool Version 0.9.15.0. and yes, I believe so.
Flashmode->Choose FTF->Wipe Appslog and Cache, uncheck Data->Flash
That looks like 4.2. FW, and a custom ROM? I would like to have the original 4.3 .
DCWolfie said:
That looks like 4.2. FW, and a custom ROM? I would like to have the original 4.3 .
Click to expand...
Click to collapse
Yes, but if that will work then you will have more chance to Update via Flashtool to .136 FW 4.3 and maybe get Root too (Optional).
---------- Post added at 02:59 AM ---------- Previous post was at 02:57 AM ----------
DCWolfie said:
Flashmode->Choose FTF->Wipe Appslog and Cache, uncheck Data->Flash
Click to expand...
Click to collapse
BTW, if you still have problems then you have to wipe Data too, it may be the issue.
eclyptos said:
Yes, but if that will work then you will have more chance to Update via Flashtool to .136 FW 4.3 and maybe root too (Optional).
Click to expand...
Click to collapse
Hm.. I'm not sure about a custom ROM, It's a road I'm not quite familiar with, if you understand .
There isn't any troubleshooting I could do that you can think of? Have i selected the right FTF for my phone? Is it actually possible to downgrade from 4.4.2. to 4.3?
EDIT:
If I'm going to delete my data, exactly WHAT am I losing? I want to know what I have to take backup of before trying that out.
DCWolfie said:
Hm.. I'm not sure about a custom ROM, It's a road I'm not quite familiar with, if you understand .
Click to expand...
Click to collapse
It's not Custom, it's Stock, they are all Stock, but you can have Root on it.
DCWolfie said:
There isn't any troubleshooting I could do that you can think of? Have i selected the right FTF for my phone? Is it actually possible to downgrade from 4.4.2. to 4.3?
Click to expand...
Click to collapse
Yes, it is possible, I did many times. Check everything you downloaded or did, nobody can know that better than you-self.
DCWolfie said:
EDIT:
If I'm going to delete my data, exactly WHAT am I losing? I want to know what I have to take backup of before trying that out.
Click to expand...
Click to collapse
OK, then, wipe everything and make a fresh installation of 4.3, I think this will work. Backup anything what is important to you, Pictures, Vids, or Data games to not going to download them again. I don't know, wipe everything..
HELP ME..
Hello to alls.. really need help here.. I'm a new user of Z1. Buy Z1 phone yesterday and really impress on previous adroid 4.3 version..
After upgrade to kitkat its start to annoying me.. so i start to google about this problems. now i know it was happen by kitkat.
i dont know how to do a flash.. which flash tool are suittable for Z1 right now?
i search for my country firmware on xda.developer and i could't find it..
i really want to get rid this kitkat off from my z1..
PLEASE HELP ME...
customization version - 1276-7939-R3C
sorry about my poor english.. :smileyexclaim:
malamiaoki said:
Hello to alls.. really need help here.. I'm a new user of Z1. Buy Z1 phone yesterday and really impress on previous adroid 4.3 version..
After upgrade to kitkat its start to annoying me.. so i start to google about this problems. now i know it was happen by kitkat.
i dont know how to do a flash.. which flash tool are suittable for Z1 right now?
i search for my country firmware on xda.developer and i could't find it..
i really want to get rid this kitkat off from my z1..
PLEASE HELP ME...
customization version - 1276-7939-R3C
sorry about my poor english.. :smileyexclaim:
Click to expand...
Click to collapse
You will find all on XDA just by searching the right Words.
You have to use "Flashtool v0.9.16", download the FTF from "Mega Collection" for your Model (C6902/3/6). Download the FTF "Generic" or "Commercial", the customization have nothing to do with that, put that FTF in the Folder of Flashtool, Run Flashtool, Flash, select the right FTF, put your Phone in "Flashmode" and when Flashtool asking connect the phone via USB to PC, Wipe everything Data, Cashe, Appslog. Done.
Do not ask for step by step, all what you have to know I already wrote.
Clik Thanx.
Hey guys.
I just updated my Z1 to 14.3.A.0.757 and now the camera wont work and i dont know why?
When i open camera and press takke pic. its not Auto Focusing and the Lights turn on and nothing happends.
Then its just stay whit full lights on and dosent do ****
So i have to press lockscreen button and then back on.
You guys have any idea?
Thx....
Did you wipe data/cache before upgrading?
It's a bug from Sony, since there are many including myself, suffering from it. It made me downgrade to 4.3 since camera is a big deal on this phone.
Sent from my C6903 using XDA Premium 4 mobile app
Bumblecito said:
Did you wipe data/cache before upgrading?
Click to expand...
Click to collapse
No i dident its that why it wont work?
Just do same install and wipe data/Cache then?
Dont know why i need to delete data?
Did do a fresh update whit wipe data/cache but same problem.
C_Karhu said:
It's a bug from Sony, since there are many including myself, suffering from it. It made me downgrade to 4.3 since camera is a big deal on this phone.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So its no way i can use the newest update and make the camera work?
This is realy bad from sony.
Arnisen85 said:
Hey guys.
I just updated my Z1 to 14.3.A.0.757 and now the camera wont work and i dont know why?
When i open camera and press takke pic. its not Auto Focusing and the Lights turn on and nothing happends.
Then its just stay whit full lights on and dosent do ****
So i have to press lockscreen button and then back on.
You guys have any idea?
Thx....
Click to expand...
Click to collapse
is this an official update or rooted update? LB or UB?
k.s.deviate said:
is this an official update or rooted update? LB or UB?
Click to expand...
Click to collapse
Used NUT's download page then i found the Firmware. The Stripped and flashable solution.
Dont know what LB or UB stand for
Dont know why the camera wont work now.
Just did a fresh install of C6903_14.1.G.1.534_[NUT].ftf.torrent and the camera still wont work.
I am lost guys please help me.
Arnisen85 said:
Used NUT's download page then i found the Firmware. The Stripped and flashable solution.
Dont know what LB or UB stand for
Dont know why the camera wont work now.
Just did a fresh install of C6903_14.1.G.1.534_[NUT].ftf.torrent and the camera still wont work.
I am lost guys please help me.
Click to expand...
Click to collapse
LB = locked bootloader
UB = unlocked bootloader
I also used @Nut's .757, my bootloader is locked and have never suffered from any camera issues.
Unfortunately my only suggestions would be to wipe cache..
k.s.deviate said:
LB = locked bootloader
UB = unlocked bootloader
I also used @Nut's .757, my bootloader is locked and have never suffered from any camera issues.
Unfortunately my only suggestions would be to wipe cache..
Click to expand...
Click to collapse
I have UB.
I installed 681. and now camera working seams like only firmware the camera working on are 681.
Or do i have to do something advanced to get the newest firmware whit out camera crash?
Dont understand why only 681. working whit the cam.
Cheers
Arnisen85 said:
I have UB.
I installed 681. and now camera working seams like only firmware the camera working on are 681.
Or do i have to do something advanced to get the newest firmware whit out camera crash?
Dont understand why only 681. working whit the cam.
Cheers
Click to expand...
Click to collapse
I have noticed a trend with UB and camera issues. are you using a custom kernel? If not, i would consider relocking your bootloader or flashing your back up if you made one before you unlocked. Once thats done and you confirm camera working on .534.. follow this quide http://forum.xda-developers.com/showpost.php?p=52407809&postcount=2 this page is by @gregbradley
Hopefully everythin gwill work for you.
k.s.deviate said:
I have noticed a trend with UB and camera issues. are you using a custom kernel? If not, i would consider relocking your bootloader or flashing your back up if you made one before you unlocked. Once thats done and you confirm camera working on .534.. follow this quide http://forum.xda-developers.com/showpost.php?p=52407809&postcount=2 this page is by @gregbradley
Hopefully everythin gwill work for you.
Click to expand...
Click to collapse
Thx i gone se tomorrow its littlebit late now here in Norway
I post back if something magical happends
Thx for the help dude
Long press power button....long press on shut down.....u will be asked if u want to reboot in safe mode ......select yes.....after u r in safe mode reboot automatically....i had some issues in camera.....this fixed it...hope it works fr u
Sent from my C6902
Go back to 534 using flashtool, then re-root your phone, then install a custom recovery, then install a custom rom, don't boot, boot to flashmode and flash the global or region specific FTF for your phone not the stripped version, obviously taking care not to include TA and System in the flash, also don't perform a wipe from within flashtool on the second flash.
Done
Obviously do this only when all else has failed, should only take around 20 minutes max
dladz said:
Go back to 534 using flashtool, then re-root your phone, then install a custom recovery, then install a custom rom, don't boot, boot to flashmode and flash the global or region specific FTF for your phone not the stripped version, obviously taking care not to include TA and System in the flash, also don't perform a wipe from within flashtool on the second flash.
Done
Obviously do this only when all else has failed, should only take around 20 minutes max
Click to expand...
Click to collapse
Very strange now i am on 14.3.A.0.681 and i have installed all the apps phonebook bla bla bla
Now i have backed up in TWR because this is working everything is working.
But how can i upgrade now to the newest?
Whit out mess this up again Dont want to go back to 534 again takes some time
I did go back to 534 then rooted it then flashed whit stripped throug TWR in to 681. so camera is working thx god
And phone is Unlocked B. dont know if that have anything to do whit it?
And if you dont have a rooted or UB whoud the camera work then whit the newest firmware?
I think its very strange camera only working in 681.
But that dosent maters cuz i am a nooooby
k.s.deviate said:
I have noticed a trend with UB and camera issues. are you using a custom kernel? If not, i would consider relocking your bootloader or flashing your back up if you made one before you unlocked. Once thats done and you confirm camera working on .534.. follow this quide http://forum.xda-developers.com/showpost.php?p=52407809&postcount=2 this page is by @gregbradley
Hopefully everythin gwill work for you.
Click to expand...
Click to collapse
Damn i dont have a backup before i UB so then i am stuck then ?
Arnisen85 said:
Damn i dont have a backup before i UB so then i am stuck then ?
Click to expand...
Click to collapse
No I dont think so, I'm pretty sure you can relock your bootloader. There should be a guide in the develpment section.
k.s.deviate said:
No I dont think so, I'm pretty sure you can relock your bootloader. There should be a guide in the develpment section.
Click to expand...
Click to collapse
Finally this worked just fine.
[LB&UB]CriskeloROM v5.6 [Android 4.4] Kit Kat[20/05]
http://forum.xda-developers.com/showthread.php?t=2761614
Everything works like a sharm
Finally some god news. Best of all Camera are 100% working.
4.4.2 - 14.3.A.0.757 and CriskeloROM v5.0
Thx guys for all your help realy nicely done. peace and love from a happy guy
Arnisen85 said:
Used NUT's download page then i found the Firmware. The Stripped and flashable solution.
Dont know what LB or UB stand for
Dont know why the camera wont work now.
Just did a fresh install of C6903_14.1.G.1.534_[NUT].ftf.torrent and the camera still wont work.
I am lost guys please help me.
Click to expand...
Click to collapse
upgrade or downgrade into 4.3 thats hope it will works
I had this issue with .681 using nut method aswell.
Followed all directions and wiped prior to flash in recovery. All was fine but.camera was pitch black and fuzzy it would take a picture with flash but only crap.
All I had to do was
back up using titanium
Enter recovery and factory reset
Wipe dalvic cache
Reboot
Reinstall vital data only from titanium
Do not restore any camera app or data
Working perfectly.
Hope this helps and is untested on .757
Sent from my C6906 using XDA Free mobile app
Everything is working now.
Just see above. how i fixed it and i am using 757.
quickpanic said:
I had this issue with .681 using nut method aswell.
Followed all directions and wiped prior to flash in recovery. All was fine but.camera was pitch black and fuzzy it would take a picture with flash but only crap.
All I had to do was
back up using titanium
Enter recovery and factory reset
Wipe dalvic cache
Reboot
Reinstall vital data only from titanium
Do not restore any camera app or data
Working perfectly.
Hope this helps and is untested on .757
Sent from my C6906 using XDA Free mobile app
Click to expand...
Click to collapse
Hello there,
After i updated with NUTS release, the update pops up again even tho i updated it. What could possibly be the problem?
Any help is greatly appreciate it. Thanks in advance
samircali said:
Hello there,
After i updated with NUTS release, the update pops up again even tho i updated it. What could possibly be the problem?
Any help is greatly appreciate it. Thanks in advance
Click to expand...
Click to collapse
is your bootloader unlocked???
if its thats the problem if not just reflash the newest firmware available for your device
TheHunk_2 said:
is your bootloader unlocked???
if its thats the problem if not just reflash the newest firmware available for your device
Click to expand...
Click to collapse
No, my boatloader is not unlocked. It shows that i have the 4.4.4 installed in my setings. Do i have to flash the ftf file again. I dunno what to do.
samircali said:
No, my boatloader is not unlocked. It shows that i have the 4.4.4 installed in my setings. Do i have to flash the ftf file again. I dunno what to do.
Click to expand...
Click to collapse
what is your device model number?
c6903 ,c6902 or what?
TheHunk_2 said:
what is your device model number?
c6903 ,c6902 or what?
Click to expand...
Click to collapse
My device mobile number is C6903. Is there hope to fix this. Maybe NUT uploaded the wrong ftf or the flashible zip.
samircali said:
My device mobile number is C6903. Is there hope to fix this. Maybe NUT uploaded the wrong ftf or the flashible zip.
Click to expand...
Click to collapse
Every problem can be solved.BUT DEATH :laugh:
Im c6903 too. im not having this problem im on this firmware http://dfiles.ru/files/tqsgjp29m
download it check your pc for the drivers and stuff and flash it .Don't forget to wipe the appslog cache and data
if still having the same problem then this is your best shot http://www.xperiablog.net/2014/08/0...rtified-for-xperia-z1-z-ultra-and-z1-compact/
TheHunk_2 said:
Every problem can be solved.BUT DEATH :laugh:
Im c6903 too. im not having this problem im on this firmware http://dfiles.ru/files/tqsgjp29m
download it check your pc for the drivers and stuff and flash it .Don't forget to wipe the appslog cache and data
if still having the same problem then this is your best shot http://www.xperiablog.net/2014/08/0...rtified-for-xperia-z1-z-ultra-and-z1-compact/
Click to expand...
Click to collapse
Is it with root or without root
You don't need root to flash the firmware just search abour it in Google you'll find everything you need.
TheHunk_2 said:
You don't need root to flash the firmware just search abour it in Google you'll find everything you need.
Click to expand...
Click to collapse
Yes, but I dont want to lose root. My phone is rooted with NUTS version since the beginning. This is the first time Im getting this problem.
Thanks anyway
samircali said:
Yes, but I dont want to lose root. My phone is rooted with NUTS version since the beginning. This is the first time Im getting this problem.
Thanks anyway
Click to expand...
Click to collapse
flash the firmware then root it with easyrooting kit and towlroot