Related
I have the p880g model, I have rooted the phone and tried flashing CWM onto it.
Now, when I try to boot to recovery, I get "ERROR: boot image signation; Critical failure: unable to start kernel"
And when I try to boot regularly, I get stuck on the service provider splash screen (WIND Mobile).
Is there any tool I can use to get out of this? I had USB debugging enabled before this all went downhill
Corno4 said:
I have the p880g model, I have rooted the phone and tried flashing CWM onto it.
Now, when I try to boot to recovery, I get "ERROR: boot image signation; Critical failure: unable to start kernel"
And when I try to boot regularly, I get stuck on the service provider splash screen (WIND Mobile).
Is there any tool I can use to get out of this? I had USB debugging enabled before this all went downhill
Click to expand...
Click to collapse
have you unlocked your kernel before you tried flashing cwm?
Flying_Bear said:
have you unlocked your kernel before you tried flashing cwm?
Click to expand...
Click to collapse
Do you mean unlocking the bootloader? No I didn't, I found out after the fact that the p880g can't.
I used this method to root it: http://forum.xda-developers.com/showthread.php?t=1886460
And then just tried using ROM Manager to flash CWM and then I tried rebooting into recovery.
Ah, didnt see that you have canadian version. You need unlocked bootloader to flash cwm trough rom manager afaik. What you can do to fix your issue, is reflash kdz file. There is a guide somewhere on the forum.
Flying_Bear said:
Ah, didnt see that you have canadian version. You need unlocked bootloader to flash cwm trough rom manager afaik. What you can do to fix your issue, is reflash kdz file. There is a guide somewhere on the forum.
Click to expand...
Click to collapse
So it is fixable? I'm not exactly sure what a kdz file is, would you be able to point me to the guide? I'm also worried my phone won't be able to do it because I was on V09b development software, not whatever the release stuff was.
I had this same problem with my P880g, back before I realized CWM doesn't work with that model. I fixed it by re-flashing the V10C KDZ to my phone. However, it was already running V10C, so I don't know how yours will be affected.
The thread on how to flash a KDZ is here: http://forum.xda-developers.com/showthread.php?t=2069723
Flash the kdz file with the kdz flash tool and put mode on emergency
NOT emergency cs that wont do anything
Sent from my LG-P880 using xda premium
I have an htc One running on the Reliance Network. Versions 4.1.2 / 1.29.651.10
It is Bootloader Unlocked with TWRP 2.6.0.1 and root
I have downloaded the mouthful OTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2-1.29.651.10_release_326731tcfazf1gnytc7g74.zipOTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2
-1.29.651.10_release_326731
When I try to flash it using TWRP it bombs out as there is no MD5 file.
I have two queries:
1. How do I update the TWRP to 2.6.3.0?
2. How do I install the update.
I prefer to use the fastboot method?
I have downloaded the update to my PC since aborting deletes the file. Also, I have the TWRP on my PC.
Please advise and help.
Check PM
sgiitk said:
I have an htc One running on the Reliance Network. Versions 4.1.2 / 1.29.651.10
It is Bootloader Unlocked with TWRP 2.6.0.1 and root
I have downloaded the mouthful OTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2-1.29.651.10_release_326731tcfazf1gnytc7g74.zipOTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2
-1.29.651.10_release_326731
When I try to flash it using TWRP it bombs out as there is no MD5 file.
I have two queries:
1. How do I update the TWRP to 2.6.3.0?
2. How do I install the update.
I prefer to use the fastboot method?
I have downloaded the update to my PC since aborting deletes the file. Also, I have the TWRP on my PC.
Please advise and help.
Click to expand...
Click to collapse
You cannot upgrade when your phone is rooted(i got to know from hetaldp)
I upgraded to JB 4.3, it awesome. Touch is Excellent. i too use relaince. there are no issues.
BUT remember you cannot root again, as over i am facing problems,,,
check : http://forum.xda-developers.com/showthread.php?t=2494594
So Please kindly wait, till the root for hTC ONE for upgraded JB 4.3 one Comes...
Are you using Sprint or T-Moile or Version HTC ONE?
To get upgrade installed, please un-root, relock, and then you can perform the update...
[email protected] said:
You cannot upgrade when your phone is rooted(i got to know from hetaldp)
I upgraded to JB 4.3, it awesome. Touch is Excellent. i too use relaince. there are no issues.
So Please kindly wait, till the root for hTC ONE for upgraded JB 4.3 one Comes...
Are you using Sprint or T-Moile or Version HTC ONE?
To get upgrade installed, please un-root, relock, and then you can perform the update...
Click to expand...
Click to collapse
It is Sprint, and from Hetal. Unrooting and relocking can be a pain, reloading everything. However, for almost two years I did not do any work on the Android side, so have forgotten everything.
I do not mind a locked phone it I can get to 4.3
Can you please pm me with the unrooting, relocking and the 4.3! Root for 4.3 is inevitable - just a matter of time.
Following the GooManager route I managed to get TWRP 2.6.3.0 installed, except the phone did not reboot. I did check it is 2.6.3.0.
Now the problem of the OTA remains. Maybe I will be forced to follow pm.mohanani's route of relocking. I cannot understand if I relock the bootloader then is not the unrooting automatic!
Also, Mr Mohanani GooManager requires root, so do not bother.
Managed to upgrade to 4.3 using Sprint_HTC_One_m7wls_3_04_651_2_RUU from Android Central as suggested by Hetal. I had to do a <fastbook oem lock> first. No problems except it wiped the data totally. Working fine. I have a few points / questions
1. Booting into Recovery is showing the Red Exclamation in a Triangle. Obviously not working, as in rooted!!
2. The Boot into recovery is showing both [RELOCKED] and S-off.
- Is this the cause?
- As per Hetal S-off means that I can root straight away irrespective of the Relocked status
- I guess OTA to KitKat (when it comes) is also a no go.
- What recovery is suggested TWRP 2.6.3, CWM (version?), or some other. This means that 4.4 will again be a full reload.
- Any fixes?
sgiitk said:
Managed to upgrade to 4.3 using Sprint_HTC_One_m7wls_3_04_651_2_RUU from Android Central as suggested by Hetal. I had to do a <fastbook oem lock> first. No problems except it wiped the data totally. Working fine. I have a few points / questions
1. Booting into Recovery is showing the Red Exclamation in a Triangle. Obviously not working, as in rooted!!
2. The Boot into recovery is showing both [RELOCKED] and S-off.
- Is this the cause?
- As per Hetal S-off means that I can root straight away irrespective of the Relocked status
- I guess OTA to KitKat (when it comes) is also a no go.
- What recovery is suggested TWRP 2.6.3, CWM (version?), or some other. This means that 4.4 will again be a full reload.
- Any fixes?
Click to expand...
Click to collapse
There is no need to accept the OTA if you are s-off
bigdaddy619 said:
There is no need to accept the OTA if you are s-off
Click to expand...
Click to collapse
Thanks. So I will again wait for the 4.4 RUU to be available on XDA or somewhere, and then install and forget OTA.
The point is recovery. I presume with S-off custom recovery must to be installed.
Do I install TWRP which takes care of root or do you suggest some other route, ie, root (how?) > recovery.
sgiitk said:
Thanks. So I will again wait for the 4.4 RUU to be available on XDA or somewhere, and then install and forget OTA.
The point is recovery. I presume with S-off custom recovery must to be installed.
Do I install TWRP which takes care of root or do you suggest some other route, ie, root (how?) > recovery.
Click to expand...
Click to collapse
Install TWRP 2.6.3.0
Option 1 flash SuperSU or another superuser file and run stock rooted
Option 2 flash a custom rom
Still stuck. I downloaded GooManager, and it will go into download > nowstarting and hang forever. I was advised to go the adb fastboot way, i.e.
download latestTWRP image filethen
adb reboot bootloader
then when I get
ui fstboot
fastboot flash recovery <twrp-recovery-name.img>
and its done.
I downloaded the .img file. Put everything into c:\recovery. Moved there under the command prompt. Plugged the phone into the computer, got both the drives (htc sync manager, and HTCONE) . So the connection was kosher.
Then gave adb reboot bootloader
The adb daemon started, but it found no device.
Obviously I being a noob in this game was missing something.
Also, I hear that the ROMs are available which to not reformat the storage. Are these the Deodexed versions or something.
Also, once in ten calls or so the screen goes totally blank at the end and is pain to restart the phone.
Checked up with http://forum.xda-developers.com/showthread.php?t=2497712
Seems that I am S-off but no rooted! Now what??
After a day or so and some cool thought I think I may have the problem identified. It is likely to be the lack of a root. I tried the following and the responses there from:
adb reboot bootloader
rebooted into bootloader Showing relocked and S-off. No fastboot option in the lower menu!
Now:
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7wls.img
I get
sending recovery <8600kB>...
Okay [ 1.140s]
writing 'recovery'...
FAILED <remote not allowed>
finished. total time 1.170s
Any ideas, and when may I expect root for 4.3. At the moment the phone appears to be working file, but no recovery!! HELP!!
Do I need to unlock again despite S-off. Also, then what is the bitstream I send it from 4.3 - the same as the old one!!
Yes you need to unlock your bootloader again to be able to flash twrp
I did as per the htc route - Do the unlock, reinstalled the OS, download the bitstream, etc, and then the OS reloaded. Still Goomanager could not get TWRP 2.6.3.0 so used the fastboot route and succeeded in downloading it to the phone. Thanks for encouraging me and putting me on the right track.
Now ho to root. Then I may as well get Titanium up!
You can get SuperSU or Superuser from the playstore or install a custom rom.
A very interesting experience. I could not enter bootloader [Down-vol + power was just restarting the phone], even adb devices was drawing a blank. So I decided to do a factory reset from phone. Lo and behold it dropped me into the TWRP screen. I managed to root, restarted to the main Downloaded su checker which completed the root. Confirmed. Then downloaded Titanium with Pro license (I have it) and did a recovery. Also, TWRP Manager (downloaded) is working and I am able to start into bootloader, etc.
When I try and look for upgrades with TWRP installer it says none. I know 2.6.3.0 has been upgraded to 2.6.3.2 Let sleeping dogs lie.
Also, I have not checked with adb devices but I am sure that too will now work.
Thanks, but what is going on. Is it only God and maybe Google know what happened?
Thanks for helping, and keeping me going.
I had more or less decided to revert to 4.1 and do an S-on <fastboot oem writesecureflag 3> and bootloader lock and look for OTA!
Added on 25th November
adb still not recognising the beast. adb devices gets a blank list. Phone is available under Windows so drivers etc are Ok.
A noob question. I saw
Stock Rooted 3.04.651.2 Odex & De-Odexed
Insecure Boot img. init.d support, data/app support
Stock Rooted 3.04.651.2 Odex
Stock Rooted 3.04.651.2 De-Odexed
on the upgrade thread. Now what do the terms Rootedm Odex and De-Odexed mean to the average user. Stock means the basic htc ROM I presume.
Also, rooted means what stages are covered.
afaik to upgrade you lock the bootloader, do the upgrade, and then in normal situations again unlock the bootloader, root and install a custom recovery (TWRP does the rooting - hopefully).
Do these ROMs take care of some or more of these stages?
Hey guys,
I just flashed from 4.2 Malladus to 4.4 Malladus smoothly. Everything loaded and is buttery smooth now. I attempted to enter Recovery to make a back up but it only left me with a black screen after the LG logo. I can't seem to figure out what happened, I tried to enter TWRP through ROM Manager's boot in recovery option and also the Power off and Restart into Recovery that comes with the ROM installed.
Anyone have any ideas on how I can access my recovery again?
ifizik said:
Hey guys,
I just flashed from 4.2 Malladus to 4.4 Malladus smoothly. Everything loaded and is buttery smooth now. I attempted to enter Recovery to make a back up but it only left me with a black screen after the LG logo. I can't seem to figure out what happened, I tried to enter TWRP through ROM Manager's boot in recovery option and also the Power off and Restart into Recovery that comes with the ROM installed.
Anyone have any ideas on how I can access my recovery again?
Click to expand...
Click to collapse
Did you update your firmware also? Can't directly flash a recovery on 24A. There's some extra steps involved, AutoRec listed in the LG G2 section is the easiest way around that.
I believe I did, TBH I do not know that answer for sure. I merely followed the steps listed in the installation guide for Malladus within this page:
https://docs.google.com/document/d/1xsU9W656TA-Lw1LAlL7hqROf2QjiOI2puyDU-DDP41Q/edit - that step being 3b, telling me to flash vs980_1xx_to_24a.zip to prep for 4.4. I'm assuming that's the file for the firmware but I could be wrong.
I followed the steps completely and everything booted up beautifully, minus the issue with me having no recovery when attempting trying to make a back-up.
I'll check out the AutoRec suggestion you've given me, thanks.
ifizik said:
I believe I did, TBH I do not know that answer for sure. I merely followed the steps listed in the installation guide for Malladus within this page:
https://docs.google.com/document/d/1xsU9W656TA-Lw1LAlL7hqROf2QjiOI2puyDU-DDP41Q/edit - that step being 3b, telling me to flash vs980_1xx_to_24a.zip to prep for 4.4. I'm assuming that's the file for the firmware but I could be wrong.
I followed the steps completely and everything booted up beautifully, minus the issue with me having no recovery when attempting trying to make a back-up.
I'll check out the AutoRec suggestion you've given me, thanks.
Click to expand...
Click to collapse
If you were on 11A you needed the vs980_1xx_to_24a_twrp.zip. Meaning you had to have taken the OTA to 12B, not just have flashed the radio. If you were on 11A and didn't flash the right prep zip it would erase recovery. Either way, just download Flashify from the market and let it flash whichever recovery you want. That should work just fine. With either of those prep zips it flashed the JB aboot, and laf. So Flashify will get your recovery back.
So the AutoRec method worked beautifully. I have a recovery once again and was able to make a back-up so i can flash kernels
Thanks for the help.
JRJ442 said:
If you were on 11A you needed the vs980_1xx_to_24a_twrp.zip. Meaning you had to have taken the OTA to 12B, not just have flashed the radio. If you were on 11A and didn't flash the right prep zip it would erase recovery. Either way, just download Flashify from the market and let it flash whichever recovery you want. That should work just fine. With either of those prep zips it flashed the JB aboot, and laf. So Flashify will get your recovery back.
Click to expand...
Click to collapse
If you scroll down on page 2 of the document in the FAQ section it tells you how to install a recovery.
First of all sorry for my English...
Yesterday I was trying to install vanir room to my p880 after 10 hours I rooted the phone and unlock the bootloader then installed cwm but after reboot I get stuck on logo so I used kdz and load LGP880AT-00-V20a-262-000-MAR-26-2013+0 with (after 4 hours ) then i try using twrp and finally load the room (vanir_p880_4.4.4.112414.zip) and Gapps after rebooting I started getting crashes ( aosp keyboard, com.google, home and back buttons etc didn't work)
so again kdz then i try other room Paranoid but the same thing..
What I'm doing wrong? I used factory reset, wipe etc but same results
what gapps you flashed?
blansh heretics
The ones that are here http://forum.xda-developers.com/showthread.php?t=2439739
But I load another rom without gapps and got same errors, wizard stopped, com.Google stopped. And keyboard.
G0ll0 said:
The ones that are here http://forum.xda-developers.com/showthread.php?t=2439739
But I load another rom without gapps and got same errors, wizard stopped, com.Google stopped. And keyboard.
Click to expand...
Click to collapse
I don't really know what happened, did you successfully flashed kdz?
Where did you get it from? Here?: http://lg-phone-firmware.com/index.php?id_mod=15
Try to flash one of these (choose correct one for you)
Than you have to install recovery again.
But before that you can try to wipe /system, /data, /cache and then flash CM11 (I know it works without problems)
And I recommend you these Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
LGaljo said:
I don't really know what happened, did you successfully flashed kdz?
Where did you get it from? Here?: http://lg-phone-firmware.com/index.php?id_mod=15
Try to flash one of these (choose correct one for you)
Than you have to install recovery again.
But before that you can try to wipe /system, /data, /cache and then flash CM11 (I know it works without problems)
And I recommend you these Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
well... yes i think I flashed kdz (LGFlashTool ?) I used kdz to recover my phone to original, I know my phone is Korean version and right now I use P88020A-EUR-XXX original firmware installed with kdz
What is CM11? and how i flash it?
so I have to root and unlock bootloader again and use twrp again right?
G0ll0 said:
well... yes i think I flashed kdz (LGFlashTool ?) I used kdz to recover my phone to original, I know my phone is Korean version and right now I use P88020A-EUR-XXX original firmware installed with kdz
What is CM11? and how i flash it?
so I have to root and unlock bootloader again and use twrp again right?
Click to expand...
Click to collapse
I think you should try with CWM first, get it: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img
you can flash it with this app if you are rooted: https://play.google.com/store/apps/details?id=com.cgollner.flashify
then you can download CM11 from here: http://download.cyanogenmod.org/?device=p880
and gapps from last mine post
and then boot to recovery, do factory reset and wipe /system, then flash rom and gapps.
Hope it helps
Crash After Flash OTA Vanir 5.0
I had a similar experience. I was installing OTA latest update of Vanir...not realising that it was 5.0...a screen came up telling me that it needed to flash another recovery...not realising why it needed that, I ignored the request to flash. Of course, I then "bricked" the phone. I was able to install the original JB 4.12 (v20c) back onto the phone but now it won't root. I've tried almost every method in this forum to no avail.:
ADB just gives a message "error: closing" when I use the boot.exe method
o4xr method does nothing
all-in-one method also does nothing
ADB does recognise the device. Drivers are installed. Any help is welcome!
BermiePT said:
I had a similar experience. I was installing OTA latest update of Vanir...not realising that it was 5.0...a screen came up telling me that it needed to flash another recovery...not realising why it needed that, I ignored the request to flash. Of course, I then "bricked" the phone. I was able to install the original JB 4.12 (v20c) back onto the phone but now it won't root. I've tried almost every method in this forum to no avail.:
ADB just gives a message "error: closing" when I use the boot.exe method
o4xr method does nothing
all-in-one method also does nothing
ADB does recognise the device. Drivers are installed. Any help is welcome!
Click to expand...
Click to collapse
Have you tried to flash a recovery using fastboot? You won't need to root (if you are going to use a custom ROM) and/or it will be easier with a custom recovery
Soft brick after last update.
Hello,
I seem to have a similar problem. I updated a few days ago using Vanir updater. There were no warnings re updating the recovery, just a warning regarding losing root. I checked restore root. The phone rebooted to the bootloader logo, then to a black screen. Now, I can access Cyanogen recovery, SW update mode, abd fastboot mode using buttons and the recovery options. ADB can see the phone only in recovery mode, but not in fastboot or SW update mode. CM recovery has no option to mount USB storage, so my PC cannot see the phone, and I cannot side load a new recovery and flash a new ROM.
Is there any way to use ADB if it cannot see your phone in fastboot or SW mode? Perhaps modify the settings.secure string to enable ADB? ADB can see the phone in recovery mode.
Otherwise I will try flashing a stock ROM via KDZ or LG firmware update tool, the re-root and proceed - but rooting was a major ordeal the first time, so I would like to avoid doing that again.
Thanks in advance.
Unable to install root without twrp installed. Unable to install twrp by known oneclick method as pc screen says done and to pull battery, yet phone shows nothing in progress bar and "0" processed. Have done this many times to no avail including assuming it worked and pulled battery and tried recovery with only OEM recovery working.
Am using T-Moble lgg4 H81120i v.6.0 done by OTA update. Am running windows 8.1 with antivirus off and all drivers installed and running.
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Just read this and follow every step