I am currently using CyanogenMod 11.0 20140420 by Maclaw, but this has been going on since I started using the custom ROMs. Any time I try to use my phone in Mass Storage mode, my computer will not read the device, but in MTP mode, it reads the storage, but everything doesn't show up properly. Some files on the external SD card won't show up at all unless I use my microsd card reader and put it in there. Anyone else have this issue or know how to fix it?
No one? It's kind of annoying that Mass Storage mode doesn't work
Predreus said:
No one? It's kind of annoying that Mass Storage mode doesn't work
Click to expand...
Click to collapse
try installing the usb driver! here http://get.maclaw.pl/?id=61
Already tried, didn't help anything.
Predreus said:
Already tried, didn't help anything.
Click to expand...
Click to collapse
Try this app or a similar one
mauam said:
Try this app or a similar one
Click to expand...
Click to collapse
Thank you, but I've tried that as well, couldn't even change the mode. I've also tried "USB mode switch for SGS1 on CM" (can't post links because I'm under 10 post) but when I switched to mass storage, my computer wouldn't recognize the phone.
Related
I just updated to alpha 6, and im having a problem with my internal storage. When I plug my phone up to my computer only the external sd card shows up, but when not hooked up, all my apps have no problem accessing my internal sd card.
I've already tried the wipe/factory reset as said in the development form but that didn't fix anything
Thanks!
avatre0 said:
I just updated to alpha 6, and im having a problem with my internal storage. When I plug my phone up to my computer only the external sd card shows up, but when not hooked up, all my apps have no problem accessing my internal sd card.
I've already tried the wipe/factory reset as said in the development form but that didn't fix anything
Thanks!
Click to expand...
Click to collapse
sorry you did so much work trying to fix this.. its a known issue atm. :/
Sent from my XT862 using XDA App
Hashcode said:
sorry you did so much work trying to fix this.. its a known issue atm. :/
Sent from my XT862 using XDA App
Click to expand...
Click to collapse
Hashcode,
I remember reading about this when ICS AOSP was first being compiled, and that this was a design change in order to increase security of the devices. I saw a Galaxy Nexus for the first time yesterday and when I plugged it into my machine I thought it was using MTP to transfer files. Has anybody else out there in the porting community been able to allow USB mass storage yet for the internal memory or maybe that's just a feature that's been permanently disabled by Google?
Hi there I'm new to the forum i hope i have posted correctly
I'm currently trying to connect my LG 4X to my Mac but it wont read as a normal USB device =\
no matter what usb mode i set it to. is there a way to connect to it without using windows and installing LG PC suite and all that?
Thanks
KyouS said:
Hi there I'm new to the forum i hope i have posted correctly
I'm currently trying to connect my LG 4X to my Mac but it wont read as a normal USB device =\
no matter what usb mode i set it to. is there a way to connect to it without using windows and installing LG PC suite and all that?
Thanks
Click to expand...
Click to collapse
don't know how it works on a Mac, but there is no common usb mass storage currently, i think you mean that the internal sd and external sd
where be mounted as drives ...
you only can access the storages when mounted as MTP
hope this helps
Install "Android File Transfer" ( http://www.android.com/filetransfer/ ) and mount your 4X as MTP.
Thanks!
maximilien03 said:
Install "Android File Transfer" and mount your 4X as MTP.
Click to expand...
Click to collapse
Wow thanks Lots Android File Transfer did the Job
Thank You
fire3d said:
don't know how it works on a Mac, but there is no common usb mass storage currently, i think you mean that the internal sd and external sd
where be mounted as drives ...
you only can access the storages when mounted as MTP
hope this helps
Click to expand...
Click to collapse
Yea i tried that, tried every connection type but didnt work =\ But thanks for our reply
i installed Android File Transfer and its all good now.
Whenever I plug the Capativate (AT&T) into my pc it detects, but doesnt show up yes dev options are disabled and it shows the screen where usb storage. Any ideas i've tried multiple things including swap batteries, rom change, and even installing nexus drivers. BTW i'm using RemICS link is http://forum.xda-developers.com/showthread.php?t=1625619 Thanks
Jitar said:
Whenever I plug the Capativate (AT&T) into my pc it detects, but doesnt show up yes dev options are disabled and it shows the screen where usb storage. Any ideas i've tried multiple things including swap batteries, rom change, and even installing nexus drivers. BTW i'm using RemICS link is http://forum.xda-developers.com/showthread.php?t=1625619 Thanks
Click to expand...
Click to collapse
Do you have fast charge unable?
Also, when you see the usb storage screen, do you mount it?
Did you try to mount storage through recovery?
BWolf56 said:
Do you have fast charge unable?
Also, when you see the usb storage screen, do you mount it?
Did you try to mount storage through recovery?
Click to expand...
Click to collapse
. Actually I found out the problem it was a usage of an ADB driver every time it was plugged in, thanks for trying to help though
Hi All,
I'm newbie to this area and I just flashing my P1000 into CM10.1 with JB 4.2.2. Everything is work fine for me and I love the PDroid Manager function very much too!
The only problem that I encountered now is the USB mass storage function. When i plug in the USB cable into desktop computer, it only shows external SD card drive but internal SD card drive shows nothing whereby lots of data were stored into internal SD card.
Does anyone help to enlightening me on how to get back to live for my internal SD card drive?
Thanks in advance!
Regards,
littlejohn799
littlejohn799 said:
Hi All,
I'm newbie to this area and I just flashing my P1000 into CM10.1 with JB 4.2.2. Everything is work fine for me and I love the PDroid Manager function very much too!
The only problem that I encountered now is the USB mass storage function. When i plug in the USB cable into desktop computer, it only shows external SD card drive but internal SD card drive shows nothing whereby lots of data were stored into internal SD card.
Does anyone help to enlightening me on how to get back to live for my internal SD card drive?
Thanks in advance!
Regards,
littlejohn799
Click to expand...
Click to collapse
Try to disable and re-enable the mass storage.
The error should only occur after the boot.
Bye. Paolo.
alessandronip said:
Try to disable and re-enable the mass storage.
The error should only occur after the boot.
Bye. Paolo.
Click to expand...
Click to collapse
Hi Paolo,
Thanks for your advice. However, I tried to disable & re-enable the mass storage under storage - USB computer connection still can't solve my problem as computer keep asking to "insert a disk" when I click the internal SD card drive.
Any idea?
Thanks.
hi all,
after reset all setting to default factory setting, the internal SD card mass storage issue had been settled. Thanks for your concern and advice.
regards,
littleJohn
hi there,
i installed the rom is its fine, but i cant connect it to my pc ..
I researched the problem already and a solution should be to dial *#7284# into the dialpad and enter some kind of menu... but it doesn´t happen for me :<
anyone an idea ?
appreciate it
Corey- said:
hi there,
i installed the rom is its fine, but i cant connect it to my pc ..
I researched the problem already and a solution should be to dial *#7284# into the dialpad and enter some kind of menu... but it doesn´t happen for me :<
anyone an idea ?
appreciate it
Click to expand...
Click to collapse
Connect to your PC?
You are not being clear.
You connect it using the USB cable.
If you meant to say the PC can't detect it, you still have to tell in what way, as storage, in Odin, etc, etc?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Connect to your PC?
You are not being clear.
You connect it using the USB cable.
If you meant to say the PC can't detect it, you still have to tell in what way, as storage, in Odin, etc, etc?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
yeah, im connecting it to my pc and it doesnt appear in windows as mass storage
hardware manager shows "7 CDC´s" as a missing driver ..
and i figured i have to enter some kind of menu, dialing *#7284# into dialpad to reset the usb settings of the tablet
but the menu doesnt appear if i dial the number ..
Corey- said:
yeah, im connecting it to my pc and it doesnt appear in windows as mass storage
hardware manager shows "7 CDC´s" as a missing driver ..
and i figured i have to enter some kind of menu, dialing *#7284# into dialpad to reset the usb settings of the tablet
but the menu doesnt appear if i dial the number ..
Click to expand...
Click to collapse
Have you set Fast Charger?
If set can not use mass storage.
Bye. Paolo.
alessandronip said:
Have you set Fast Charger?
If set can not use mass storage.
Bye. Paolo.
Click to expand...
Click to collapse
fast charge is off
Hi All,
Same problem comes back again after I've done factory reset to my GT-P1000. Besides this, I discover that the radio keeps telling me no service but I still can access my mail using mobile data network (not WiFi).
Other than these, my GT-P1000 will reboot itself automatically. Please be informed that I did flashing this from original GB to this ROM directly.
Is there any advice can be taken? I don't wish keep factory resetting my GT-P1000 in order to access the internal SD again.
Another issue need to find out is how to switch the picture storage location from internal SD to external SD after camera snapped?
Please help, thanks!
Regards,
littleJohn
Hi,
I have just upgraded to 4.3 and when plugging USB to PC, a new status icon appears MTP mode enabled. I was very happy with that because I have accidentally deleted some of my photos, and as far as I know under MTP mode there is no way to recover deleted files if You are not rooted. I have tried all my best to find out how to use this new feature to disable MTP but without any success. Do You have any idea how can I do it? Or any way to recover deleted files under MTP
Many thanks in advance:
Kucsi
kucsi said:
Hi,
I have just upgraded to 4.3 and when plugging USB to PC, a new status icon appears MTP mode enabled. I was very happy with that because I have accidentally deleted some of my photos, and as far as I know under MTP mode there is no way to recover deleted files if You are not rooted. I have tried all my best to find out how to use this new feature to disable MTP but without any success. Do You have any idea how can I do it? Or any way to recover deleted files under MTP
Many thanks in advance:
Kucsi
Click to expand...
Click to collapse
Mtp is there from begining i guess you noticed it now
Sent from my SPH-D700 using Tapatalk 2
That's because you're missing the correct HTC One USB drivers. Otherwise, instead of being limited to the camera memory, you would see the HTC One displayed as type "Portable Device" and if you go in there, you'll see "Internal Storage" which will give you access to everything on your SD card, including pictures. Then, you can use a data recovery software, like GetDataBack to try and recover your deleted pictures.
electronical said:
That's because you're missing the correct HTC One USB drivers. Otherwise, instead of being limited to the camera memory, you would see the HTC One displayed as type "Portable Device" and if you go in there, you'll see "Internal Storage" which will give you access to everything on your SD card, including pictures. Then, you can use a data recovery software, like GetDataBack to try and recover your deleted pictures.
Click to expand...
Click to collapse
Hi,
Thank You for Your quick reply. I have already tried that, I can access the internal memory (see attached picture), but it has no drive letter as You can see. If a run get data back, the HTC ONE internal storage is not on the list I can select from( see picture getdata). What I am doing wrong?
Kucsi
kucsi said:
Hi,
Thank You for Your quick reply. I have already tried that, I can access the internal memory (see attached picture), but it has no drive letter as You can see. If a run get data back, the HTC ONE internal storage is not on the list I can select from( see picture getdata). What I am doing wrong?
Kucsi
Click to expand...
Click to collapse
Actually, forget about GetDataBack or other data recovery software. Have a look at this: http://forum.xda-developers.com/showthread.php?t=1994705