Hi,
I'm new and I want to install custom recovery TWRP v2.7.0.0 on my I8190.
How do I install it with odin? I found two downloads for TWRP v2.7.0.0.
techerrata.com but the file is only 10KB size and seems empty.
novafusion.pl but the odin version seems broken. 7z: "There is no correct record at the end of archive".
Any advise or is there another way to install?
Thanks,
Takatu
downlad the following .tar file and flash it via odin
click here
it´s TWRP 2.7.0.0 by novafusion
m.
Related
i was updating my s advance with CyanogenMod 12.1 [26/11/15].........currently i have 4.1 jellybean indian version ddlup8 with root access ........... whenever i went for recovery i install cwm 6.8 it installs for little time only. please tell where i am wrong i want to install 5.1 lollipop on my device, i follow these steps but installation always gets cancel .......
1. i ve rooted my devive
2. i installed recovery cwm
3. i back up my data
4. wipe data
5. wipe cache
6. wipe dalchvik cache
7 then i install cyanogenMOd 11 ( buit it doesnt install)
so i tried directly installing cyanogenMOd 12 with cwm but does work
so please tell me what is the problem and what step should i follow.
I want to install CyanogenMod 12.1 [26/11/15] but error comes like:
apply parsed perms : isetfilecon of /system/lost+
not supported on transport endpoint
set metedata recursive:
E:Error in /sdcard/cm12.1_
(status 7)
installation aborted
Try using TWRP instead of CWM
Patil.sid101 said:
i was updating my s advance with CyanogenMod 12.1 [26/11/15].........currently i have 4.1 jellybean indian version ddlup8 with root access ........... whenever i went for recovery i install cwm 6.8 it installs for little time only. please tell where i am wrong i want to install 5.1 lollipop on my device, i follow these steps but installation always gets cancel .......
1. i ve rooted my devive
2. i installed recovery cwm
3. i back up my data
4. wipe data
5. wipe cache
6. wipe dalchvik cache
7 then i install cyanogenMOd 11 ( buit it doesnt install)
so i tried directly installing cyanogenMOd 12 with cwm but does work
so please tell me what is the problem and what step should i follow.
I want to install CyanogenMod 12.1 [26/11/15] but error comes like:
apply parsed perms : isetfilecon of /system/lost+
not supported on transport endpoint
set metedata recursive:
E:Error in /sdcard/cm12.1_
(status 7)
installation aborted
Click to expand...
Click to collapse
Extract boot.img from cm12.1 zip file
Flash boot.IMG
Reboot recovery
Flash cm12.1 zip file followed by GAPPS
Voilà.. All done
Or you can install this modded CyanogenMod 12.1 with integrated gapps, works on old cwm too: https://www.dropbox.com/s/v41kau37sxyct7i/CM12.1.zip?dl=1
Patlcs said:
Extract boot.img from cm12.1 zip file
Flash boot.IMG
Reboot recovery
Flash cm12.1 zip file followed by GAPPS
Voilà.. All done
Click to expand...
Click to collapse
how to flash boot.img please explain in detail.
currently i have flashed 4.12 stock rom and root.zip
but twrp recovery is not installing and cwm recovery is not working
please help me to update
Patil.sid101 said:
how to flash boot.img please explain in detail.
currently i have flashed 4.12 stock rom and root.zip
but twrp recovery is not installing and cwm recovery is not working
please help me to update
Click to expand...
Click to collapse
you can try to use the temporary CWM recovery to flash the boot.img file.
as i said earlier, extract the boot.img file from the rom file and then flash it via the recovery.
I am faceing the same problem
Patlcs said:
you can try to use the temporary CWM recovery to flash the boot.img file.
as i said earlier, extract the boot.img file from the rom file and then flash it via the recovery.
Click to expand...
Click to collapse
Hi
I am faceing the same problem. Can u Explain in Details how to use CWM recovery to flash the boot.img file ?
souravsadvanced said:
Hi
I am faceing the same problem. Can u Explain in Details how to use CWM recovery to flash the boot.img file ?
Click to expand...
Click to collapse
Wow i didnt think that i would reply to something i said 2 years ago xD
Hmm i am a bit rusty now as i upgraded to the s7 and now note 8 where i have not rooted or installed custom roms for a while so try it at your own risk.
If i recall correctly, you need to extract the boot.img file from cm12.1 using 7zip or winrar on your pc
Then there should be another thread for a temporary cwm recovery. Download the file and flash it when u are in recovery mode.
After flashing that temp cwm file, it should boot into it automatically and then flash cm11 followed by gapps
I'm creating this thread since I can't post in the official TWRP thread yet and I couldn't find an answer there.
I've downloaded the latest recovery img (3.0.2-4) from the TeamWin site and it's only 7 kb, is this the right file size? Cause I flashed it using TWRP 3.0.2-3 and after rebooting, it wouldn't start the recovery. I had to reflash 3.0.2-3 via adb, and I noticed that 3.0.2-3 file size is like 8 mb. What could be wrong?
Thanks in advance!
The Correct Size of 3.0.2-4 TWRP is 7.9MB Download TWRP 3.0.2-4
You Can Flash the TWRP via Fastboot or TWRP App Play Store Link
Your Phone Must be Root if you are using TWRP APP .
Sorry for my English
hello, i have an old twrp.... and i would update it to use a nougat rom.
I sincerely did not remember how i flashed it, is there any method to flash a newer twrp, using my actual twrp?
if not, could you provide me a link where i can find the latest twrp to download, and a GUIDE to flash it?
thanks in advance
1.Download the official twrp app
2.select your device
3.download .img file
4flash the downloaded file with the option in twrp app
5.done
(Sry 4 bad english)
i found it on needrom
https://www.needrom.com/download/twrp-recovery-25/
it works good i flashed aosp extended rom 4.4
I need somebody to build me a working
TWRP build for the SM-A305N (Korea).
Every TWRP in XDA doesn't seem to work in my device, probably because they aren't for the A305N.
A week before, I finally found a 3.3.1 version TWRP build that works in my phone so I flashed it via odin, flashed magisk.zip, and rebooted successfully.
but after flashed an optimization file I found that the build doesn't support decrypting files, and it can't read the internal storage even though my device reboots into system normally and the files are all right in the file manager (files are shown as random characters in twrp)
Please, could somebody make a working TWRP build for A305N?
+Q. Can a Disable-dm verity file brick my device?
I made a password as a security lock system on my phone, but when I booted to twrp it didn't ask for a password. (Also with PIN)
Also, when I typed
"twrp decrypt MyPassword"
(MyPassword is the password I put on my device)
TWRP said that decrypting files wasn't installed on this build of TWRP.
sycall2847 said:
I need somebody to build me a working
TWRP build for the SM-A305N (Korea).
Every TWRP in XDA doesn't seem to work in my device, probably because they aren't for the A305N.
A week before, I finally found a 3.3.1 version TWRP build that works in my phone so I flashed it via odin, flashed magisk.zip, and rebooted successfully.
but after flashed an optimization file I found that the build doesn't support decrypting files, and it can't read the internal storage even though my device reboots into system normally and the files are all right in the file manager (files are shown as random characters in twrp)
Please, could somebody make a working TWRP build for A305N?
+Q. Can a Disable-dm verity file brick my device?
Click to expand...
Click to collapse
Hi
Download twrp 3.3.1.0.tar and flash with odin
Then download twrp 3.4.0.img or 3.5.1.img and install by twrp
And remember mount system
Could you plz explain steps more specifically
DOES THIS REALLY WORK ON MY GALAXY A30? Thanks bro
Yes. Work for me
sycall2847 said:
Could you plz explain steps more specifically
Click to expand...
Click to collapse
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
OK thanks Umm.. TWRP 3.3.1 is already flashed in my device (It cant read internal storage). Should I first flash the stock recovery img with odin before flashing 3.3.1 again ir should I just flash the 3.3.1 again?
Mozaffar1994 said:
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
Click to expand...
Click to collapse
After rebooting to TWRP 3.4, What should I do next? Should I flash the magisk zip?
Can I just flash the TWRP 3.4 file by flashify or TWRP official app? Will current TWRP be replaced with it?
sycall2847 said:
Can I just flash the TWRP 3.4 file by flashify or TWRP official app? Will current TWRP be replaced with it?
Click to expand...
Click to collapse
If work ,do it
If what works??
sycall2847 said:
If what
Click to expand...
Click to collapse
I installed as I said before.
I do not know of other methods.
Sorry
Mozaffar1994 said:
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
Click to expand...
Click to collapse
This is how i installed TWRP on my A305F
Hello!
I rooted to my galaxy s10 G973F via magisk. I would like to install recovery 3.3.1 and then flash a new custom rom but odin crashes.. I think I followed all the steps correctly: download twrp img, patch via magisk, turn files into tar with 7zip and finally flash with odin... I'm ing screen
Can someone help me please? Thank you very much