Hi,
I'm new and I want to install custom recovery TWRP v2.7.0.0 on my I8190.
How do I install it with odin? I found two downloads for TWRP v2.7.0.0.
techerrata.com but the file is only 10KB size and seems empty.
novafusion.pl but the odin version seems broken. 7z: "There is no correct record at the end of archive".
Any advise or is there another way to install?
Thanks,
Takatu
downlad the following .tar file and flash it via odin
click here
it´s TWRP 2.7.0.0 by novafusion
m.
Hey guys
I have an LG G2 Verizon that had TWRP 2.7.0.0 on it and I would like to update it. If I download the new 2.8.6.0 build, am I able to just flash the new image in my old recovery or do I have to do it through the TWRP Manager app? Thanks in advanced.
If you downloaded the new bumped TWRP, you can either flash it in recovery or extract the .img from the recovery zip file and flash it in Flashify or something
Thanks a lot. You solved me a lot of headache.
hello, i have an old twrp.... and i would update it to use a nougat rom.
I sincerely did not remember how i flashed it, is there any method to flash a newer twrp, using my actual twrp?
if not, could you provide me a link where i can find the latest twrp to download, and a GUIDE to flash it?
thanks in advance
1.Download the official twrp app
2.select your device
3.download .img file
4flash the downloaded file with the option in twrp app
5.done
(Sry 4 bad english)
i found it on needrom
https://www.needrom.com/download/twrp-recovery-25/
it works good i flashed aosp extended rom 4.4
I am a n00b,
Unsure how to install TWRP first as cannot find right guide,
All TWRP threads (COMES WITH SUPERSU).. can i continue with same ?
Request help since confused.
Whatever guide you're using that says to install SuperSU, just replace that with the Magisk zip instead and it should work...
IODroids said:
I am a n00b,
Unsure how to install TWRP first as cannot find right guide,
All TWRP threads (COMES WITH SUPERSU).. can i continue with same ?
Request help since confused.
Click to expand...
Click to collapse
Download the respective twrp image from official site then put the device in fastboot mode after that flash the recovery img file you need to have adb drivers installed after you successfully flash twrp download stable or beta magisk and flash in twrp thats it.
This is the main part of the question.
Wich TWRP to flash.
Tried 1 for redmi note 4 and went into black logo screen stuck.
Had to do clean install.
toxicated2 said:
Download the respective twrp image from official site then put the device in fastboot mode after that flash the recovery img file you need to have adb drivers installed after you successfully flash twrp download stable or beta magisk and flash in twrp thats it.
Click to expand...
Click to collapse
Thanks God .
Easiest way to install TWRP AND root VIA Magisk..
Passed Google safetynet check too
Download official rootkit from here:
= https://forum.xda-developers.com/showpost.php?p=72287096&postcount=1
(read entire topic once)
Installed latest version for TWRP mido from this page = https://dl.twrp.me/mido/twrp-3.2.3-1-mido.img.html
Reason - So you have latest TWRP
Installed magisk instead of supersu (download latest magisk from here) = https://forum.xda-developers.com/showpost.php?p=68966662&postcount=1
Rename AND Replace the latest downloaded TWRP file to recovery.img
and latest magisk to SuperSU.zip
These files are in Rootkit\nk7\ folder
VOILA you are done..
With USB debugging enabled connect your phone to PC and run the main file "Redmi Note 4 (SD) ROOT Toolkit.exe" in Rootkit folder.
It will automatically start the fastboot process.
Once done.. Follow instructions as listed in main toolkit topic:
https://forum.xda-developers.com/showpost.php?p=72287096&postcount=1
Google safety net passed
I need somebody to build me a working
TWRP build for the SM-A305N (Korea).
Every TWRP in XDA doesn't seem to work in my device, probably because they aren't for the A305N.
A week before, I finally found a 3.3.1 version TWRP build that works in my phone so I flashed it via odin, flashed magisk.zip, and rebooted successfully.
but after flashed an optimization file I found that the build doesn't support decrypting files, and it can't read the internal storage even though my device reboots into system normally and the files are all right in the file manager (files are shown as random characters in twrp)
Please, could somebody make a working TWRP build for A305N?
+Q. Can a Disable-dm verity file brick my device?
I made a password as a security lock system on my phone, but when I booted to twrp it didn't ask for a password. (Also with PIN)
Also, when I typed
"twrp decrypt MyPassword"
(MyPassword is the password I put on my device)
TWRP said that decrypting files wasn't installed on this build of TWRP.
sycall2847 said:
I need somebody to build me a working
TWRP build for the SM-A305N (Korea).
Every TWRP in XDA doesn't seem to work in my device, probably because they aren't for the A305N.
A week before, I finally found a 3.3.1 version TWRP build that works in my phone so I flashed it via odin, flashed magisk.zip, and rebooted successfully.
but after flashed an optimization file I found that the build doesn't support decrypting files, and it can't read the internal storage even though my device reboots into system normally and the files are all right in the file manager (files are shown as random characters in twrp)
Please, could somebody make a working TWRP build for A305N?
+Q. Can a Disable-dm verity file brick my device?
Click to expand...
Click to collapse
Hi
Download twrp 3.3.1.0.tar and flash with odin
Then download twrp 3.4.0.img or 3.5.1.img and install by twrp
And remember mount system
Could you plz explain steps more specifically
DOES THIS REALLY WORK ON MY GALAXY A30? Thanks bro
Yes. Work for me
sycall2847 said:
Could you plz explain steps more specifically
Click to expand...
Click to collapse
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
OK thanks Umm.. TWRP 3.3.1 is already flashed in my device (It cant read internal storage). Should I first flash the stock recovery img with odin before flashing 3.3.1 again ir should I just flash the 3.3.1 again?
Mozaffar1994 said:
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
Click to expand...
Click to collapse
After rebooting to TWRP 3.4, What should I do next? Should I flash the magisk zip?
Can I just flash the TWRP 3.4 file by flashify or TWRP official app? Will current TWRP be replaced with it?
sycall2847 said:
Can I just flash the TWRP 3.4 file by flashify or TWRP official app? Will current TWRP be replaced with it?
Click to expand...
Click to collapse
If work ,do it
If what works??
sycall2847 said:
If what
Click to expand...
Click to collapse
I installed as I said before.
I do not know of other methods.
Sorry
Mozaffar1994 said:
1. Download twrp 3.3.1.0.tar
2. Flash this file with odin ( get help with google)
3.turn off your phone
4.hold power and volume up keys for going to twrp
5.go to mount and tick system
6. Install twrp 3.4.0.img from install on twrp
Reboot recovery and you see twrp 3.4 installed on your phone
Click to expand...
Click to collapse
This is how i installed TWRP on my A305F