Related
Does anyone have a problem with the usb cover besides me? I'm not even hard on my phone, but its loose as a goose. Is this somthing i can buy online? Ive tried amazon and ebay
that useless rubber thing over the base on the neon200? yup drives me nuts too along with the battery cover sliding off 100 times a day...
Punnisher_42 said:
that useless rubber thing over the base on the neon200? yup drives me nuts too along with the battery cover sliding off 100 times a day...
Click to expand...
Click to collapse
No joke haha I called htc and they said to put another one on there was 163 bucks and they could keep it up to 3 weeks. That sounded so stupid i laughed. Is there any way i can buy one and replace it myself? Anyone know of such a place lol?
That piece of rubber crap really ****s me
I constantly pull it on and of to charge my phone in my car, I ended up cutting it in half with a pair of scissors! so that the usb port is exposed and the sd slot is still covered by half the rubber.
As for the battery back don;t get me started on how many times I drop my phone per day cause the back cover falls of!
currently have double sided tape on the battery to try and keep the back on.
StylusPilot said:
That piece of rubber crap really ****s me
I constantly pull it on and of to charge my phone in my car, I ended up cutting it in half with a pair of scissors! so that the usb port is exposed and the sd slot is still covered by half the rubber.
As for the battery back don;t get me started on how many times I drop my phone per day cause the back cover falls of!
currently have double sided tape on the battery to try and keep the back on.
Click to expand...
Click to collapse
Lol, i hear ya
Its really annoying to me, perhaps the only flaw in the phone.
So far I have had no luck finding a standalone battery charger so I find that I have to recharge via the USB port, which means pulling that cover open frequently.
If it comes off entirely, does it go back on?
What are others doing with theirs?
Hi Guys,
i know im reviving an old thread here, but i am getting one of these tommorrow.
What happens if the rubber cover is simply cut off? Does it really detract from the phone?
Didn't see any info about it here, so I figured I would chime in with some initial impressions.
The inductive back is a smooth texture, not crosshatched like the D4 is standard. It is a small distinction that I am sure will fade over time, but for now, it feels too slippery.
The inductive back does increase the thickness of the droid 4, it isn't a lot, but it is probably enough to make some cases not work. I still have to source an otterbox case to see if a) it fits, and b) to see if the case interferes with the inductive charge, I will report back when I find out.
I am at the office, so I cannot actually see how it plays with my energizer qi pad, hopefully it doesn't beep all the time like the verizon one reportedly does.
Pics below
boonesimpson.com/wp-content/uploads/2012/03/2012-03-12_10-38-32_375.jpg
boonesimpson.com/wp-content/uploads/2012/03/2012-03-12_10-39-04_840.jpg
gossipninja said:
Didn't see any info about it here, so I figured I would chime in with some initial impressions.
The inductive back is a smooth texture, not crosshatched like the D4 is standard. It is a small distinction that I am sure will fade over time, but for now, it feels too slippery.
The inductive back does increase the thickness of the droid 4, it isn't a lot, but it is probably enough to make some cases not work. I still have to source an otterbox case to see if a) it fits, and b) to see if the case interferes with the inductive charge, I will report back when I find out.
I am at the office, so I cannot actually see how it plays with my energizer qi pad, hopefully it doesn't beep all the time like the verizon one reportedly does.
Pics below
boonesimpson.com/wp-content/uploads/2012/03/2012-03-12_10-38-32_375.jpg
boonesimpson.com/wp-content/uploads/2012/03/2012-03-12_10-39-04_840.jpg
Click to expand...
Click to collapse
Let us know how it works!
And bleh, Verizon charging pad beeps constantly? That... seems silly, to put it politely...
Well I havent used the verizon pad, but that is what I heard, beeps all the time, beep on connect, beep on full, beep on release.
I have had my droid on the energizer pad and it works and there were no beeps.
I like that orientation doesn't seem crucial. I had my phone at different angles and as long as you get the blue light, you are good to go.
I did see a demo where Panasonic made qi charger with a moving coil
youtube.com/watch?v=an7lWob6ZrE
That would rock, as then you don't have to worry about placement (not that that is a huge issue)
Quick update about the charger
I am having some issues, namely the phone will indicate it is charging, the charge pad will indicate it is charging, and yet after hours my battery meter has barely moved. Interestingly enough the phone lasts seems to last quite awhile on 20% battery. I think something is goofy with the battery reporting.
I will likely fully charge the phone over usb and then discharge as normal and see if that "resets" it.
I also worry that on and after you remove the phone from the charge pad the back is INCREDIBLY hot. Hot to the point where I am worrying it is hurting the battery.
Does anyone have the safe temp range for Droid 4 batteries? So I can monitor it.
If things don't sort out this weekend, I will be contacting Motorola about my issues.
I wonder if they will tell you to use the 'official' pad...
Also, you could try downloading Battery Monitor Widget to see what is going on wrt charging and discharging, including (dis)charge rates.
According to Wikipedia, operating temp for Li-ion batteries is up to 158F...however, heat above room temp causes them to lose capacity. The more "full" they are, the more capacity they lose in hot weather. Temps north of 100F in conjunction with a full charge would cause them to lose a third of their capacity in a year. Continuing to charge them past the point where they're full causes them to heat up, and eventually enter thermal runaway, a chain reaction that guarantees they keep heating until they ignite. Modern devices of course are designed to sense that point and stop before it's too late; that's why a multi-cell battery may never reach 100% charge: If one cell is at 100%, the charger stops, leaving the rest at a mere ninety-something.
GEF
well at one point today, i think the phone did overheat and would not turn on for about 20 minutes, the back was quite hot. Since then, I had it fully charge on the inductive pad (energizer qi) and it was not hot and fully charged.
I will be angry if I am told I have to use the VZW pad, what is the point of a standard if they don't follow it?
As far as thermal runaway, the Droid 4 does auto turn off charging when it is full whether on the pad or usb.
gossipninja said:
well at one point today, i think the phone did overheat and would not turn on for about 20 minutes, the back was quite hot. Since then, I had it fully charge on the inductive pad (energizer qi) and it was not hot and fully charged.
I will be angry if I am told I have to use the VZW pad, what is the point of a standard if they don't follow it?
As far as thermal runaway, the Droid 4 does auto turn off charging when it is full whether on the pad or usb.
Click to expand...
Click to collapse
Wow... You are making me reconsider the induction pad. It sounds great, but if it generates excess heat, that might be a bad tradeoff given the battery isn't replaceable.
Just received mine in the mail this morning! I haven't played around with it too much, just confirmed it works (charged from 90% --> 100%).
I don't know whether I have an updated version or what, but the beep isn't too bad. I would say my dishwasher's beep is louder. I can see it being annoying if it was in a bedroom or something, but for my office (at home) it isn't too bad.
gossipninja said:
I still have to source an otterbox case to see if a) it fits, and b) to see if the case interferes with the inductive charge, I will report back when I find out.
Click to expand...
Click to collapse
Ever get the Otterbox case to see if it fits with the inductive battery cover?
No I have not found a verizon store that has one I can try on and test with a charging pad.
I know the inductive case makes it a hair thicker so I worry about both fit, and charging.
Droid 4 + Charging Back + OtterBox Does NOT fit
Sorry to jump on someone else's thread, but I have received an Otter Box case for Motorola Droid 4 and I also have the inductive charging back, and with the charging back on the phone, the rear part of the case will NOT FIT.
I have tried the plastic rear case itself without the silicone rubber insert and even that won't fit.
I have left a post with Otterbox support to see if they MIGHT be working on a new case, But, I don't hold out much hope for that.
I have not received my charging pads yet, so I can not say if the Droid 4 can be charged through the case or not.. When I get the pads I'll give it a try and report back.
Exactly how does this work? Does it plug into the usb port, or just replace the original back?
The reason I am asking is my daughter just recently broke the usb port on her Droid 4. I tried to get it fixed at a local computer/cellphone repair center, but they coudln't get the part to fix the port. Today I threw in the towel, and used my insurance.
I was told it just replaced the back, as far as the Verizon rep could tell, it didn't plug into the usb port, but I didn't want to pony up the money for the back, and a mat just to find out I had to replace the phone anyhow.
Contacts are internal
The charging back has 4 contacts on it that connect to the internal connections of the phone.
24fan4life said:
Exactly how does this work? Does it plug into the usb port, or just replace the original back?
The reason I am asking is my daughter just recently broke the usb port on her Droid 4. I tried to get it fixed at a local computer/cellphone repair center, but they coudln't get the part to fix the port. Today I threw in the towel, and used my insurance.
I was told it just replaced the back, as far as the Verizon rep could tell, it didn't plug into the usb port, but I didn't want to pony up the money for the back, and a mat just to find out I had to replace the phone anyhow.
Click to expand...
Click to collapse
It doesn't use the USB port. That's actually why I got one. I wanted to avoid wear and tear on the USB port.
That being said, I'd see if Verizon would send you a new one? They generally will unless there is evidence of gross abuse...
podspi said:
It doesn't use the USB port. That's actually why I got one. I wanted to avoid wear and tear on the USB port.
That being said, I'd see if Verizon would send you a new one? They generally will unless there is evidence of gross abuse...
Click to expand...
Click to collapse
Thank you both for your replies, but I already used my insurance. I already took it into Verizon to see if they could do anything for us at the store. When the representative that helped us saw that the case around the screen was cracked, he told us if we attempted to use the warranty that Motorola would have said the reason the port no longer worked was from being dropped, even though being dropped had nothing to do with the port coming loose.
She now has a protective case for it, and hopefully keeps it on there, so the warranty can be used if it has port issues like the first one.
I am still thinking about getting her an inductive charge back, to keep wear and tear off the port. She tends to have it plugged in by her bed, and randomly answers texts throughout the night.
24fan4life said:
I am still thinking about getting her an inductive charge back, to keep wear and tear off the port. She tends to have it plugged in by her bed, and randomly answers texts throughout the night.
Click to expand...
Click to collapse
That's the problem, if you get the inductive charging cover, no current cases will fit. Since there is no possibility of using an extended battery with the Droid 4, the case manufacturers ASSUME that nobody needs a larger case. The inductive cover is not common and therefore is too much of a niche market for anyone to make a case for it. I tried hacking up a regular case but it didn't work out.
hey ive been searching around the net and saw this
http://forum.xda-developers.com/showthread.php?t=1986016
if you willing to try it yourself!
inductive cover contacts
Can someone snap some pics of the contacts inside the inductive cover? Made my own out of palm touchstone parts now just need to wire it
Found a picture back on post #14
Did you get it working?
I would like to know When is Zerolemon extended battery for Samsung Galaxy S 4 Active coming out?
Never. That would require a new battery cover which is very accurately designed with it's o-ring to seal out water from Samsung. Do you want to trust a $600 device to a cheap 3rd party cover designed by some wanna-be engineer that it's going to hold 30 minutes at 1 meter?
Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNSM
Probably never. This isn't a dumb question like the guy above made it seem. They would just release a battery with a case that would devoid the protection that the device receives from the back cover. Which still wouldn't be too bad, considering you'd still have the shock proof, dust proof, and "water resistant" front (I say that, because now the back isn't). It also probably won't ever come out, because very seldom few people like you and I would like a huge battery for the Active, as the only way to do that would really be to lose water proof capabilities. Which is the main reason why people got the phone. So, it's just not a money maker if they did. They might sell ten or maybe even 100, but not enough to spend the money to develop it and produce it.
One of the other advantages of the S4Active is that it has a removable battery. What I do is, I have a second battery which I bought along with a charging pack that charges the battery independent of the phone. It was the best investment I've made in regards to phone accessories so far.
This way, I always have a second battery that I can carry around with me (in a secure little case) without sacrificing the size/aesthetic of the phone (since I can put that spare in another pocket, leave it in the car, etc) and I don't have to worry about the water proof seal. In addition to this, I'll use the MHL port a LOT less, which means I'm far less likely to damage it (or it's flimsy water-proof cover).
tiskael said:
One of the other advantages of the S4Active is that it has a removable battery. What I do is, I have a second battery which I bought along with a charging pack that charges the battery independent of the phone. It was the best investment I've made in regards to phone accessories so far.
This way, I always have a second battery that I can carry around with me (in a secure little case) without sacrificing the size/aesthetic of the phone (since I can put that spare in another pocket, leave it in the car, etc) and I don't have to worry about the water proof seal. In addition to this, I'll use the MHL port a LOT less, which means I'm far less likely to damage it (or it's flimsy water-proof cover).
Click to expand...
Click to collapse
I think I'll follow the suggestion of having a separate battery charge and an extra battery pack.
Hello, my galaxy note has been having some issues, a couple of days ago it would charge with the charger bent down but I decided to play around with the port with a toothpick to look for dust and bend the metal bit in the middle. Now it barely charges at all, I believe the charger bit is fairly cheap but I am not sure if it is very hard to do. I am wondering if I am best off buying a new phone or paying someone to fix it for me? Or just having a go at putting the new piece in myself? I have tried using another charger and the same charger charges other phones.
-Any Help Greatly Appreciated
jeffreymonk said:
Hello, my galaxy note has been having some issues, a couple of days ago it would charge with the charger bent down but I decided to play around with the port with a toothpick to look for dust and bend the metal bit in the middle. Now it barely charges at all, I believe the charger bit is fairly cheap but I am not sure if it is very hard to do. I am wondering if I am best off buying a new phone or paying someone to fix it for me? Or just having a go at putting the new piece in myself? I have tried using another charger and the same charger charges other phones.
-Any Help Greatly Appreciated
Click to expand...
Click to collapse
If you are ok using a screwdriver (jewelers type), you won't have any issues. There are countless youtube video's that show the removal procedure on that usb port. Granted, I've been doing electronics for over 40 years, but it's about a 10 minute procedure. One thing I do, with these super tiny screws, is I keep a small magnet handy that is attached to the bottom of a small metal bowl. When I take out a screw, it goes in the bowl, and with the magnetism, it won't get lost that way.
When you replace the USB port, get one that matches the one you remove. Depending on the country you live in, there could be a few different types. They all, will charge your phone, but, if you get the wrong match, the cellular signal you end up with, could be 1/2 of what it should be, so if you are in a low signal area with the one you have now, with the wrong usb board, you could end up with no signal.
p51d007 said:
If you are ok using a screwdriver (jewelers type), you won't have any issues. There are countless youtube video's that show the removal procedure on that usb port. Granted, I've been doing electronics for over 40 years, but it's about a 10 minute procedure. One thing I do, with these super tiny screws, is I keep a small magnet handy that is attached to the bottom of a small metal bowl. When I take out a screw, it goes in the bowl, and with the magnetism, it won't get lost that way.
When you replace the USB port, get one that matches the one you remove. Depending on the country you live in, there could be a few different types. They all, will charge your phone, but, if you get the wrong match, the cellular signal you end up with, could be 1/2 of what it should be, so if you are in a low signal area with the one you have now, with the wrong usb board, you could end up with no signal.
Click to expand...
Click to collapse
Thankyou I will have a go at removing it I am a bit unsure of which one to buy so I will have a look around once I take it out, They are fairly cheap aren't they?
jeffreymonk said:
Thankyou I will have a go at removing it I am a bit unsure of which one to buy so I will have a look around once I take it out, They are fairly cheap aren't they?
Click to expand...
Click to collapse
Yeah, less than $10(USD). Last one I got was like 8.95 or something.
Got a 'SAVFY' charging case for just £11.38 shipped off eBay. The battery of the S7 Edge seems excellent so far, but if, like me, you go on many football away days etc, you'll easily get through it in a day. Anyway, it looks as though SAVFY is just a knock-off Chinese brand, but I've used knock-off Chinese batteries before with good results (with one exception) and for less than £12 it seems a bargain. Here's an Amazon listing for the case: https://www.amazon.com/Charger-SAVFY-Portable-External-Rechargeable/dp/B01EN0JVAW
Mixed reception online it seems. One fella said the battery died after charging to just 30% (to me that sounds like a duff one), while others complained about the colours and tactility of the case. It claims to be 5200mAH but not sure how I'd really test that.
Quite a few of the negative comments are to do with the manufacturing materials, as such I would really advise anyone who does buy this case.....
BUY THE BLACK ONE. If you have a white phone, buy the black one, if you have a black phone, buy the black one, if you have a green with yellow spots phone, buy the black one. The reason why? The non-black colours are 'glossy', a bit like enamel or a hard plastic texture. One of the photos in the link above shows the Rose Gold one and you can see the hard plastic reflecting in the light. The plastic is also hard and feels brittle and will probably break if dropped.
The black one is different. It's still quite hard, but the outside material is like a rubbery texture. A bit like you get in some cars on the dash board. I doubt it'll be much better for absorbing impact, but I believe it will reduce the likelihood of bits of dust scratching the back and outer edges of your phone.
A few observations of my own:
- I personally am not all that impressed by the 'protective' level of this case. Large parts of the edge of the phone are completely exposed, so anything in your pocket could . I've done a few little (completely unscientific) tests using a table and the phone and I reckon if the phone hits the ground face down, you've got maybe 2-3mm of flex from the corners of the device, which is pretty much nothing. If it hits on the top you've got a reasonable 3-4mm and the bottom I'd say you're safe as it's protected by the thickest part of the case. If it hits the floor on an edge however, the amount of space between the phone and the floor becomes precariously low in my opinion. If you're lucky, it'll hit the phone on the back, bottom, or corners. Anything else could be curtains for this beautiful device.
- Not a negative, but it does add a fair bit of weight onto your phone (which tied into the point above...). It takes your phone from being a lightweight comfortable device to being, hmmmm, nearly the weight of a tablet I'd say. The case on its own weighs more than the entire phone. Fine in your pocket, but it does get a bit tedious holding it.
- No Micro-USB Cable was included. I know this sounds picky, but even the cheapest of cheap Chinese batteries i've bought in the past have come with a 5cm cheap cable to charge with. Come on?
Not had chance to actually try the case. It came charged up to the 4th light, so I will probably charge it up full and see if I can try it for a day. Don't really know how to test a 5200mAh battery, but my thinking is that it should be able to charge a S7 Edge from 0-100% then run it for a while too? Is that a terribly unscientific experiment? You betya.....
Tried it yesterday. Charged the phone from 27% up to 100% (while the phone was running too). It then charged it for about another 10-15% after (while running).
I call that a win.
skezza said:
Tried it yesterday. Charged the phone from 27% up to 100% (while the phone was running too). It then charged it for about another 10-15% after (while running).
I call that a win.
Click to expand...
Click to collapse
How's it holding up so far?
Sent from my LG G3 using XDA Labs
anaya1213 said:
How's it holding up so far?
Sent from my LG G3 using XDA Labs
Click to expand...
Click to collapse
So, I've used it a lot since then. I've been able to experiment with it a lot.
I think it's fair to say that it's better used keeping a fully charged phone, fully charged. Now, that might sound daft, but what I mean is, if you have your phone, run it down to 60%, then put it in the battery case, this seems to use more energy than simply leaving the phone in the battery case all day. I don't have any scientific explanation for this, rather I have empirical evidence.
The first few times I took it out, I did just as I describe above, allowing the phone to discharge to a moderate level, then re-charging it up. Suffice to say, in this scenario, the battery case will quickly run down to the 50% marker or even down to the 25% marker. This was fine, but obviously once the case is dead.... well, it's dead. Now you're onto your phone battery.
Instead, I tried it one day from 100%, so simply using the phone in a constant state of charge. Now, the case itself does occasionally switch off (perhaps it's wired to detect when the phone gets to 100%). I simply flick it back on. In this scenario, I was able to keep the phone at 100% all day (despite using it A LOT), and only use about 25% - 50% of the charge case. By 8pm, there was still plenty of charge left in the case and my phone was still at 100%.
As I said, I don't know the science behind this. I know that energy is often lost as heat, and it gets much warmer when charging from 50% than maintaining the phone at 100%. I know that charging via Micro-USB is also not 100% efficient. In fact, studies show that Micro USB is often inefficient.
With that in mind, I think I've given a pretty good example of how I use it. I think these are excellent cheapo battery cases, but don't use them to re-charge your phone to get maximum performance. Rather keep your phone in them all day, right from the minute you leave the house.
I am strictly against cheap battery cases. Heard a thousand stories about poor quality, no money back guarantee etc. I am a strict opponent of the "official" power cases also. The brand manufacturers spend zero time and effort on something worthy and innovative.
I would like to be proven wrong on my first opinion. Maybe I will buy some cheapo just to test it. I need more reviews and opinions on the SAVFY.
Meanwhile, the case market is hungry for innovations.
I admire brands like[URL="https://i-blades.com/samsung-phone-cases/galaxy-s7-edge-battery-life-case-memory/"] Nexpaq[/URL], I-blades and the uniVERSE Otterbox. If some of the brand manufacturers get the idea to make something similar there will be no time until cheap knock-offs appear on the market. I would definitely like to try some product of that kind
levjaskulski said:
I am strictly against cheap battery cases. Heard a thousand stories about poor quality, no money back guarantee etc. I am a strict opponent of the "official" power cases also. The brand manufacturers spend zero time and effort on something worthy and innovative.
I would like to be proven wrong on my first opinion. Maybe I will buy some cheapo just to test it. I need more reviews and opinions on the SAVFY.
Meanwhile, the case market is hungry for innovations.
I admire brands like[URL="https://i-blades.com/samsung-phone-cases/galaxy-s7-edge-battery-life-case-memory/"] Nexpaq[/URL], I-blades and the uniVERSE Otterbox. If some of the brand manufacturers get the idea to make something similar there will be no time until cheap knock-offs appear on the market. I would definitely like to try some product of that kind
Click to expand...
Click to collapse
Thanks for replying. So my problem with the branded ones is they tend to be expensive..... and I mean really expensive!! Look at the Zero Lemon one. In the UK, that is currently £59 on Amazon. £59!!!??!!?! It's also $59 which in dollars, that might not sound too bad, but in UK money, that's seriously expensive for what is essentially nothing more than a big battery. I mean hell, you can buy a decent branded Universal battery pack with similar amounts of juice (or more), with several ports and some extra features for about £20. They're cashing in on the fact it's an S7 Edge specific accessory and the fact the people who own these phones either have big expensive contracts or earn decent money and therefore can afford to buy such a luxury product. Alternatively, you buy an original battery case from Samsung.... £54.99 and only 3100Mah. That's a joke. That's enough to recharge it once.....
I tried to look at the Otterbox but there was no price for the S7 Edge. I also looked at the nexpaq but there doesn't seem to be any details regarding the S7 Edge. While I think you're right to admire those two brands, and what they're doing is clearly innovative, something theoretical is useless to me. I came from an S4. I had two spares batteries in my wallet, which was ideal really because it meant I could switch any time I like and pretty much guarantee a whole weekend without my phone charger. You'd be surprised how often I used those spares. I reckon at least once or twice a week. I cannot do this with the S7 Edge. The Edge battery is good without a spare battery. Much better than the S4..... but like all phones, throw a few apps on, get some data connections running and boom, that battery soon disappears. I am a proper power user.
So, we look for answers and solutions that can give us something now. You can pay Zero Lemon £60 to sell you a posh, branded, ugly, massive case, which makes your phone into a brick.... or you look at the alternatives and you usually end up looking through eBay.
SAVFY are nothing special as far as I'm concerned. From what I gather they seem to be a company which buys cheap products and sticks their logo on. Many companies do that. In fact, some of the bigger brands do that as well. As with all labelled products, it's a gamble, you might get a good one, you might get a bad one. SAVFY were surprisingly good to me I found. So, I haven't mentioned that I decided to call them up over the fact my case appeared to discharge excessively if the phone was down to 50%, and they sent me another as a goodwill gesture for free. In fairness to them, they really didn't have to do that..... especially considering I've since found ways of making my original case last all day. It's quite possible this case is a 4000Mah battery or something similar, it's just losing charge through an inefficient charging procedure (micro-usb).
As for a guarantee, well, the thing was like £11. What kind of guarantee do you get for £11 man? You can't even buy a decent pair of shoes for £11 in England. Guarantees are something you get with £700 phones, or a £100 car stereo. To get a guarantee/warranty with something as cheap as that, very few places in England will give you one.... maybe ALDI but don't expect them to have a S7 Edge specific one, they only really deal with universal electronics.
To sum up, I made no really attempts to find a branded battery case. I looked through eBay, spotted SAVFY (a brand I confess to buying before) and decided that for £11 it was worth the gamble.
http://www.ebay.co.uk/sch/i.html?_o...+case.TRS0&_nkw=s7+edge+battery+case&_sacat=0
As you can see, eBay is awash with unbranded/generic branded battery cases. Some are labelled (wrongly) as 8000Mah... I would keep well away from those. Some are labelled 5200Mah. I believe they're the ones where the seller has been as honest as possible. It's completely impossible for any of these cases to be an 8000Mah, otherwise they'd be huge like the Zero Lemon. Science y'all.
Finally, I decided to have one crack at finding a branded case on eBay that wasn't a generic one, and wasn't super expensive. Nope. Literally not possible. The closest I found was this:
http://www.ebay.co.uk/itm/Roger-for...213594?hash=item3f73a63b1a:g:mFcAAOSwjDZYe-lS
An AUNSY (never heard of them) 5200Mah battery case for £36 delivered.
Hmm, where have I seen that case before
https://www.amazon.co.uk/Galaxy-Edg...&qid=1485533629&sr=8-1&keywords=SAVFY+s7+edge
Nah..... When someone gets their act together, they'll create a solid 5200Mah with a genuine dependable battery at an affordable cost with a small warranty and we'll all be very very happy
https://www.youtube.com/watch?v=_v1OlFWxIls
Decent unboxing here, although he's gone for a shiny Gold one which I wouldn't recommended as it'll scratch your phone imo.
I just saw the misplaced link for I-blades. They are my most Samsung-friendly favorite brand. They have products for more and more Samsung models. Nexpaq and Otterbox stayed behind.
Previously I was referring to the innovations, not the price, though it is not so bad after all. I wish someday official Samsung product with the ideas from I-blades.
levjaskulski said:
I just saw the misplaced link for I-blades. They are my most Samsung-friendly favorite brand. They have products for more and more Samsung models. Nexpaq and Otterbox stayed behind.
Previously I was referring to the innovations, not the price, though it is not so bad after all. I wish someday official Samsung product with the ideas from I-blades.
Click to expand...
Click to collapse
100 dollars dude
skezza said:
100 dollars dude
Click to expand...
Click to collapse
I'm actually pretty tempted to buy it. I've looked through many options for battery cases but I always see there's some kind of faults with them. Either they're not protective enough or just doesn't hold its charge.
This case on the other hand, has a benefit of analyzing the air around me. I'd like to know how is the air in my work environment working in a warehouse so I may know that I should wear some extra protective stuff. Despite the Smartblade adding an ugly bump, I hope the magnet attachment is actually strong enough to just slide off if I put it into some pants I have with slim pockets. And the other thing I hope is the battery being pretty large enough to actually extend battery life better than what I have now.
GigaSPX said:
I'm actually pretty tempted to buy it. I've looked through many options for battery cases but I always see there's some kind of faults with them. Either they're not protective enough or just doesn't hold its charge.
This case on the other hand, has a benefit of analyzing the air around me. I'd like to know how is the air in my work environment working in a warehouse so I may know that I should wear some extra protective stuff. Despite the Smartblade adding an ugly bump, I hope the magnet attachment is actually strong enough to just slide off if I put it into some pants I have with slim pockets. And the other thing I hope is the battery being pretty large enough to actually extend battery life better than what I have now.
Click to expand...
Click to collapse
And you believe it?
skezza said:
And you believe it?
Click to expand...
Click to collapse
With the rapid advancement of electronics the days, this fits with the timing. I already preordered it and hopefully it comes fast enough for me to try and give a first depth review here.
GigaSPX said:
With the rapid advancement of electronics the days, this fits with the timing. I already preordered it and hopefully it comes fast enough for me to try and give a first depth review here.
Click to expand...
Click to collapse
Cool, by all means do.
Just an update. Charged from 0% to 100% with the SAVFY case yesterday, and run at the same time.
Not bad.
skezza said:
Cool, by all means do.
Just an update. Charged from 0% to 100% with the SAVFY case yesterday, and run at the same time.
Not bad.
Click to expand...
Click to collapse
What makes you so much of a skeptic with attitude? If the case doesn't work as intended, I can always return it for a refund.
GigaSPX said:
What makes you so much of a skeptic with attitude? If the case doesn't work as intended, I can always return it for a refund.
Click to expand...
Click to collapse
It's a 100 dollar case.... In England, with tax, it'll probably be the same. £100 for a fancy phone case?
It sounds like snake oil to me
I would happily spend midrange money but £100?
No thanks.... And I have a feeling people will be more keen to take a gamble on a cheap Chinese case than one which costs a days pay for most.
This video is the newest and the closest thing to review I've come across so far. They do go slow but it promises a quality product. I changed my Galaxy with a Note 5 but still I am looking forward the product. I am waiting for the Enviro Sensor Pack and then if I am satisfied will order the Battery/Memory Blade
levjaskulski said:
This video is the newest and the closest thing to review I've come across so far. They do go slow but it promises a quality product. I changed my Galaxy with a Note 5 but still I am looking forward the product. I am waiting for the Enviro Sensor Pack and then if I am satisfied will order the Battery/Memory Blade
Click to expand...
Click to collapse
I've been meaning to call the company to see when they're shipping the case for my Galaxy S7 Edge since it's already March. I already ordered the whole thing since it's a cheaper option to go with instead of spending an extra $50 on the memory blade separately.
So I tried to disassemble my SAVFY battery case today. Didn't really want to come apart. There's a hefty lithium ion battery in there. Whether it's the described 5200Mah, who knows?
I've given mine an absolute battering this week. Using it every day without fail including in seriously hot temperatures and had no issues, so I think these SAVFY ones are pretty solid for the most part. Cheap energy when you need them. Mine is starting to show signs of wear and tear now, as I'm using it so much (the rubberized finish is coming off) but yeah, it's a fairly solid piece of kit i'd say.
any update on this, which one will you recommend? cause there are numerous battery covers, which one is fake, which one is good?
Powerbear (no kickstand)
https://www.amazon.de/PowerBear-Gal...8-1&keywords=powerbear+samsung+galaxy+s7+edge
Savfy
https://www.amazon.de/SAVFY-Samsung...&sr=8-5&keywords=savfy+samsung+galaxy+s7+edge
Mondpalast
https://www.amazon.de/Mondpalast-Sc...coding=UTF8&psc=1&refRID=QG8BM6J5KT2PSR8TG5W9
etc
Ok no update then?
Verstuurd vanaf mijn SM-G935F met Tapatalk