Related
After much searching and work on fixing my bricked captivate, i broke down and bought a jig from mobiletechvideos.com. It works perfectly as intended, except for the fact that my pc is not recognizing the phone after it enters download mode. As a side note, i may have royally screwed up when i did something in clockwork recovery, where now i cant even get past the ATT World phone boot screen. Im afraid i may have deleted anything that can mount the phone to the pc. I have already installed the proper drivers, I think. Anything i can do to fix this?
So it shows the world phone screen a bunch of times? Plug it into an outlet see if the green battery comes up, just wait for it, the Gray battery will do a short of loop a few times... Once its at the green battery try to turn the phone on, be patient too, if you get the phone on, go to settings> privacy then factory data reset, make sure you backup to external or computer first
Your welcome
Now you say/press thanks
Teaching manners one person at a time
Thats not gonna work... nothing i know of can be done to it. it doesn't move past the att screen. No animation, not sound. Just ATT World Phone. i can get into download mode, but cant connect to computer. Thats the problem right there.
Try restarting your computer? I've had similar issues on a yucky iPhone, and I've read about other Captivate users with it as well, and a restart helped resolve the problem.
Go under your drivers and uninstall them and reinstall them it helped when I finally had got mine "back to his construction job" (lol download mode) it should then work
Sent from my SAMSUNG-SGH-I897 using XDA App
Ive already tried another PC and Uninstalling and reinstalling the drivers to no avail.
It just like the phone isn't even there. It will charge, but wont mount to the PC.
Not trying to insult your intelligence or anything (I might actually be insulting my own) but you have Odin open, right?
Just trying to think of anything lol
Yeah, but it wouldnt matter anyway if the computer doesnt know its there.
Try cleaning the mini usb port. Or switch the usb cord connector the samsung factory one tends to break the data + and -.
As for not getting past the at&t screen. The kernel you installed cannot read the system partition probably corrupted or the kernel you installed cannot read ext4.
If you cannot get it to be recognized send it back to your carrier for repair, should be under warranty.
Thats what im doing now. Thanks for the help, though.
Palen222 said:
After much searching and work on fixing my bricked captivate, i broke down and bought a jig from mobiletechvideos.com. It works perfectly as intended, except for the fact that my pc is not recognizing the phone after it enters download mode. As a side note, i may have royally screwed up when i did something in clockwork recovery, where now i cant even get past the ATT World phone boot screen. Im afraid i may have deleted anything that can mount the phone to the pc. I have already installed the proper drivers, I think. Anything i can do to fix this?
Click to expand...
Click to collapse
You sure you have the proper drivers installed for your phone? The links for them are on the odin forum in captivate development
Sent from my SAMSUNG-SGH-I897 using XDA App
Stuck at "Samsung Galaxy" boot screen, cant get into bootloader, computer wont detect
Hey everyone this has been a huge hassle for me for the last few days and was hoping someone could help me. I have had to resort to using my HTC Legend...which I love but it doesnt have what I need.
I was in recovery the other day trying to load a custom rom through the CWM and I went through and accidentally hit "format system". I couldn't cancel the process so I knew something bad was going to happen....I reboot the phone and for the last 3 days I have had it plugged into the Usb charger with no luck of booting, it has been stuck at the "Samsung Galaxy S 19000M" boot screen and no further. I took the battery out and tried rebooting it after a few minutes. No luck with this either, still stuck at the Samsung screen. I CAN get into "DOWNLOAD MODE" but I CAN NOT get into recovery/bootloader (hold volume up/home button/power button).
I have put it into download mode and and plugged it into the computer (I am running Windows 7 64-bit) and it will not detect it. I have all of the correct drivers, I know this as I have a friend who owns the exact same phone and my computer detects it just fine. Odin nor ADB will detect that there is anything AT ALL plugged into the computer. It does not even come up as, "android device", or "storage", there is nothing, nota, it is as if the phone isn't even plugged in. It will not detect in "download mode" nor while its stuck at the "Samsung Galaxy S" screen, and yes I have tried a different USB cable, and still nothing..
I am quite capable with electronics but I cannot find anything on the internet as of what to do. Is there anything that I could load on an external SD card that would force the phone to flash a ROM with new kernal and modem? I think the phone is empty that is why it is not booting, as if there is nothing to load on the phone. Is there anything at all that anyone can think of??? I am completely stuck. I wanted this phone to last until the Samsung Galaxy S 2 was released here lol.
I'm with Virgin Mobile Canada. Thanks!
Cant you get it into Recovery mode?
Have you tried heimdall?
You will have to follow the instructions coming with it to the letter (about installing some custom USB-driver).
Herman76 said:
Cant you get it into Recovery mode?
Click to expand...
Click to collapse
Hey herman, "I CAN get into "DOWNLOAD MODE" but I CAN NOT get into recovery/bootloader (hold volume up/home button/power button)."
profalbert said:
Have you tried heimdall?
You will have to follow the instructions coming with it to the letter (about installing some custom USB-driver).
Click to expand...
Click to collapse
Hey, I will search for that right away and let you know how it turns out. Thank you!!
well if you have download mode then dont panic.
just flash a 3 file firmware along with pit file and re-partition and you will be fine
azzledazzle said:
well if you have download mode then dont panic.
just flash a 3 file firmware along with pit file and re-partition and you will be fine
Click to expand...
Click to collapse
How can I flash any firmware if my PC will not detect the phone? When I plug the phone in there is nothing. Odin doesn't detect the phone, Keis doesn't detect the phone, ADB does not detect the phone, and I just tried Heindall, and it does not detect the phone..... Maybe the actual hardware for the USB plug in is faulty in its self, in which case I am screwed.
Galaxy19000M said:
How can I flash any firmware if my PC will not detect the phone? When I plug the phone in there is nothing. Odin doesn't detect the phone, Keis doesn't detect the phone, ADB does not detect the phone, and I just tried Heindall, and it does not detect the phone..... Maybe the actual hardware for the USB plug in is faulty in its self, in which case I am screwed.
Click to expand...
Click to collapse
i see..... i only read the last 2 posts and im always telling people off for not reading properly
have you tried the obvious steps such as
Un-install - Re install Kies
Run Odin as administrator
Tried Alternative USB port - direct into the PC motherboard
Finally a different PC all together
hope you can get it workin hate to see another broken SGS
azzledazzle said:
i see..... i only read the last 2 posts and im always telling people off for not reading properly
have you tried the obvious steps such as
Un-install - Re install Kies
Run Odin as administrator
Tried Alternative USB port - direct into the PC motherboard
Finally a different PC all together
hope you can get it workin hate to see another broken SGS
Click to expand...
Click to collapse
I have tried, uninstall-re install of kies, run odin as admin, alternate usb port, anddd I tried plugging it into my laptop...no luck...this absolutely driving me nuts because I know the phone cant be bricked, if I can get into download mode I SHOULD be fine but for some strange reason the phone seems to be undetectable...ahhhhhhhhhhhh if only there was just some way to access the internal storage or a program that would force a flash through an external SD....
I am going to try loading Ubuntu on my computer on one of my HDD and see if it will detect the phone. I am assuming this is my last option and I have high hopes as Ubuntu detects almost anything...I will update...if it doesnt work I might be looking into taking apart the phone its self and intalling a new USB plug in on the phone motherboard...
im not sure of any other steps
last resort.... have you tried another USB cable ? like your friends cable that he uses for his phone ?
EDIT: if i was you i WOULD NOT take the phone apart.... if you do and it does not work, your warranty will be void,
at least if you cant get it working you can send it off for repair and blame kies, you will have a good chance of getting it fixed by samsung than you would yourself
azzledazzle said:
im not sure of any other steps
last resort.... have you tried another USB cable ? like your friends cable that he uses for his phone ?
Click to expand...
Click to collapse
yeah lol like I said in the first post I tried a different USB cable all together.
I have two HTC Legends, tried both cables from them, plus the OEM cable that came with the SGS
azzledazzle said:
im not sure of any other steps
last resort.... have you tried another USB cable ? like your friends cable that he uses for his phone ?
EDIT: if i was you i WOULD NOT take the phone apart.... if you do and it does not work, your warranty will be void,
at least if you cant get it working you can send it off for repair and blame kies, you will have a good chance of getting it fixed by samsung than you would yourself
Click to expand...
Click to collapse
I dont know if it has been opened already by someone else. I bought the phone for $180 CAD from a sort of "2nd turn" site. As in it was being sold as is. The phone problem reported by them was that the USB connectivity was not working. When I originally got the phone from them everything was working correctly, except the USB connectivity like it stated. It came ROOTED and loaded with the leaked version of Froyo before it was out so I automatically assumed that was causing the USB problems. I got around to changing the ROM with a reported working USB using CWM. But, still no luck with USB connectivity. I just dealt with the problem and flashed everything through CWM. Which led me to this...ugh
Is there supposed to be a warranty seal behind the battery cover? Over the screws like there usually is? Cause I see nothing..
thats not good news.
there is no warranty sticker, but samsung could find out if the phone has been opened.
It depends on the actual repair guy, to be honest, samsung will have 100's of phones to repair daily, the majority just get passed on - flashed - wiped - boxed and sent back to the owner.
however if some (P)Rick is having a bad day and wants to find out why the phone is in for repair, and he finds out its been opened up, or its had custom firmware, then he can refuse to fix the phone or send it back to you with a bill included lol.
so you have to have a good excuse incase the worst happens.
if you dont fancy your chances and you feel capable of replacing the USB yourself then hey go for it !!
azzledazzle said:
thats not good news.
there is no warranty sticker, but samsung could find out if the phone has been opened.
It depends on the actual repair guy, to be honest, samsung will have 100's of phones to repair daily, the majority just get passed on - flashed - wiped - boxed and sent back to the owner.
however if some (P)Rick is having a bad day and wants to find out why the phone is in for repair, and he finds out its been opened up, or its had custom firmware, then he can refuse to fix the phone or send it back to you with a bill included lol.
so you have to have a good excuse incase the worst happens.
if you dont fancy your chances and you feel capable of replacing the USB yourself then hey go for it !!
Click to expand...
Click to collapse
Well thank you for all the help. I am going to try installing Ubuntu first and see what happens, I have never had any driver issues with that OS EVER so if its detectable, Ubuntu will be the one to detect it. If that doesn't work I might take my chances and send it in. And if like you said that one person decides to screw me over, they at least have to send it back to me, in which case I will just open it myself and change the USB plug in like I said. (which might not even be the problem...)
Is there anyway to tell on the out side without opening it if it has indeed been opened before???
erm..... i dont think so, but i dont know what measures samsung have took to find this out.
if it was me the obvious things i would look for is, damaged screw heads and scratches down the sides - where the casing has been prised open. other than that i would not know what to look for
either way, i hope u get it fixed
azzledazzle said:
erm..... i dont think so, but i dont know what measures samsung have took to find this out.
if it was me the obvious things i would look for is, damaged screw heads and scratches down the sides - where the casing has been prised open. other than that i would not know what to look for
either way, i hope u get it fixed
Click to expand...
Click to collapse
Well I sent my phone in to Samsung last week and I just got it back today! I opened it up and I guess the problem with the phone was pretty bad lol they just gave me a new phone, I was thinking it was refurbed but it said right on the repair receipt "condition=NEW" I am extremely happy.
That aside, do you know if you can use the SGS II if it is unlocked in Canada?
Well guys I’ve been reading this forum front to back for over a week and was scared as hell to mess with my phone, but I really wanted ICS and some of the other nice software I’ve seen here.
Firmware: 2.3.3
Baseband: I9000DXJV9
Kernel Version: 2.6.35.7-I9000DXJV9-CL216763
[email protected] #2
Build Number: GINGERBREAD.DXJV9
I wanted to start simple with a CF root. I’ve read the flashing instruction so many times I thought I could do it in my sleep. So I backed everything up, turned the phone off and back on in DOWNLOAD, started Odin 1.82, loaded the CF root for JVQ (which is as close as I could find worked with my phone), then I attached the USB cable. The first time it started to flash, but it immediately hung while trying to start a connection. I unplugged and the phone was still fine. Started over and this time I saw the drivers install and thought now it should be OK.
Loaded the CF root JVQ in PDA, left everything as default (re-partition unchecked) and the other two checked. It flashed quickly and just as quickly it came up FAILED! Disconnected my phone and now I can’t even get DOWNLOAD. All I get is the silly icon of a phone with a caution triangle in the middle of a dashed line to an icon of a computer and even that won’t go away now. I remember seeing this symbol one time somewhere on this board, but don't remember where.
Looks like my worst fears have come true…a bricked phone on my first try. I never envisioned a situation where I could not get to DOWNLOAD mode and I do know where to buy a JIG, but I think it wouldn't help even in this case. Any help will certainly be appreciated.
khrfx4 said:
Well guys I’ve been reading this forum front to back for over a week and was scared as hell to mess with my phone, but I really wanted ICS and some of the other nice software I’ve seen here.
Firmware: 2.3.3
Baseband: I9000DXJV9
Kernel Version: 2.6.35.7-I9000DXJV9-CL216763
[email protected] #2
Build Number: GINGERBREAD.DXJV9
I wanted to start simple with a CF root. I’ve read the flashing instruction so many times I thought I could do it in my sleep. So I backed everything up, turned the phone off and back on in DOWNLOAD, started Odin 1.82, loaded the CF root for JVQ (which is as close as I could find worked with my phone), then I attached the USB cable. The first time it started to flash, but it immediately hung while trying to start a connection. I unplugged and the phone was still fine. Started over and this time I saw the drivers install and thought now it should be OK.
Loaded the CF root JVQ in PDA, left everything as default (re-partition unchecked) and the other two checked. It flashed quickly and just as quickly it came up FAILED! Disconnected my phone and now I can’t even get DOWNLOAD. All I get is the silly icon of a phone with a caution triangle in the middle of a dashed line to an icon of a computer and even that won’t go away now. I remember seeing this symbol one time somewhere on this board, but don't remember where.
Looks like my worst fears have come true…a bricked phone on my first try. I never envisioned a situation where I could not get to DOWNLOAD mode and I do know where to buy a JIG, but I think it wouldn't help even in this case. Any help will certainly be appreciated.
Click to expand...
Click to collapse
JIG will most likely save your day, because you can have hardbricked phone only by messing with bootloaders AFAIK. And as CF-ROOT doesn't touch bootloaders, you'll be fine..just get jig and continue flashing
ps. I assume that you have tried taking battery off, inserting it while pressing 3-button combo etc. methods which you'll find around the forum..dunno even if they actually work..
Last time i got exactly the same situation when flashing CF root for 2.3.5 XXJVS..
Try connecting the phone to the comp with the phone, triangle, and comp icon on your phone screen, see if Odin detected your phone...
If yes, you can try flashing the whole stock firmware again, it should work...
i got into that situation twice and those steps always worked for me luckily.. (it works for me, saved my bricked phone)
wish you luck
asdsadas2010 said:
Last time i got exactly the same situation when flashing CF root for 2.3.5 XXJVS..
Try connecting the phone to the comp with the phone, triangle, and comp icon on your phone screen, see if Odin detected your phone...
If yes, you can try flashing the whole stock firmware again, it should work...
i got into that situation twice and those steps always worked for me luckily.. (it works for me, saved my bricked phone)
wish you luck
Click to expand...
Click to collapse
Now your solution may be exactly what happened. I tried to connect using Kies, but my computer never even saw a device being plugged in so I never even thought to try Odin.
So I must apologize. I didn’t have the patience or perseverance to wait for an answer. I happen to live in a large city in a country that has a lot of clever tech people and phones are huge here in Thailand.
I was either going to buy a cheap phone so I could stay in basic contact until I worked through the problem with the help of this board or buy a new Galaxy S, instead I decided to see if someone here could actually get me back up and running in short order. Fortunately I found one shop that did. I watched him load up Odin, pick the PDA, PHONE, CSC and PIT files and re-partition, but I don’t know how he got a connection to Odin, because that’s where I was stuck.
I certainly could no longer get a connection via Kies or the drivers I had which were working just a short time ago. So the question I still have is how the heck did he get a connection to the phone?
Of course it would be too much to ask for him to load the original software so now Kies will not work with my phone, but that doesn’t bother me so much because I really don’t use it. He installed 2.3.2, Baseband XXJVE, Build Number XWJV1, which is a step backwards, but it works, although I’ve gotten one screen with tiny red letters in the top-left corner that said “panic kernel”, but after a reboot everything has been fine. BTW, the repair cost just under $15 USD.
Here's another question while I'm at it. What causes this to happen? I thought for sure I did everything I've read a 100 times on this board in the proper order.
Buy a Jig at eBay
Well, yes JIG will most likely save your day.
BUT
Try those meanwhile you wait for JIG:
1. take battery out and leave it few hours maybe and than try to boot download mode (increase times-hour, 2 hours, 4 hours,....)
2. press buttons for download mode (that phone and pc connected with dots and triangle will most likely appear), plug your phone to PC and try different USB ports and see if odin finds your phone, it happened to me once, however odin did
find my phone on that pic and i flashed (dunno why, maybe just luck)
3. take battery out, press buttons for download mode, and put battery back in, it can trigger download mode (found this by googleing sometime ago)
Or try google for more solutions, allthough I reccomend JIG
I know about the JIG and where to get one, but it ain't gonna happen soon and I'm sure this guy yesterday did not use one and he was confident he could restore the software and he did, so there is a way without the JIG.
gaspernemec said:
Well, yes JIG will most likely save your day.
BUT
Try those meanwhile you wait for JIG:
1. take battery out and leave it few hours maybe and than try to boot download mode (increase times-hour, 2 hours, 4 hours,....)
2. press buttons for download mode (that phone and pc connected with dots and triangle will most likely appear), plug your phone to PC and try different USB ports and see if odin finds your phone, it happened to me once, however odin did
find my phone on that pic and i flashed (dunno why, maybe just luck)
3. take battery out, press buttons for download mode, and put battery back in, it can trigger download mode (found this by googleing sometime ago)
Or try google for more solutions, allthough I reccomend JIG
Click to expand...
Click to collapse
This was a very useful reply and I thank you for it. Mail here is unreliable so I won't have a JIG until April when a friend brings one over, though Hong Kong sells most of them on eBay and some of them do deliver here free. I might try to get one from there.
Anyway, if this does happen again I have a couple of other things to try thanks to you.
I thought about Google (of course), I'm just not sure how to word the search with the phone+triangle+computer icon, but I'll give that a go also.
Kurre and asdsadas2010 also gave useful replies...Thanks.
I didn't think it would be that easy to find, but the first result in my search that popped up was this thread here: http://forum.xda-developers.com/showthread.php?t=751210 and here http://forum.xda-developers.com/wiki/How_to_get_into_download_mode
Lots of variations on similar solutions. Really no need to add to this thread anymore.
Thanks
Hello, my name is TNSM and i'm new here. I signed up because i can't find anything on the internet that can help me, so i thought maybe someone here may be able to help me.
I have a Samsung Galaxy S3 Mini GT-I8190 and i'm experienced with rooting and flashing custom roms stuff. So, i was looking everywhere for a rom that included the HALO feature and after days of failed research, i found a link on Youtube to download a rom with Halo for my smartphone. I went into the recovery, backed up my current rom, wiped data and performed a factory reset, installed the rom and rebooted the phone... but after i chose the "Reboot" option, the phone never again gave a sign of life. It doesn't turn on, it doesn't show any lights whatsoever, i've tried to charge it overnight, but still nothing, considered buying a USB JIG but didn't work, my cousin says the phone seems like it doesn't even have the bootloader anymore... is my phone more than hard-bricked? Is there a way to wake my phone up again? Just for the record, it has no physical damage, it just seems like it has no software inside, that it's just hardware. By the way, when i connect it to the pc using the usb cable, the pc keeps playing the sound that something was plugged in and that something was plugged out right after, and it loops forever.
I'll give more information about the phone if needed. And i hope someone's able to help me.
- TNSM
TNSM said:
Hello, my name is TNSM and i'm new here. I signed up because i can't find anything on the internet that can help me, so i thought maybe someone here may be able to help me.
I have a Samsung Galaxy S3 Mini GT-I8190 and i'm experienced with rooting and flashing custom roms stuff. So, i was looking everywhere for a rom that included the HALO feature and after days of failed research, i found a link on Youtube to download a rom with Halo for my smartphone. I went into the recovery, backed up my current rom, wiped data and performed a factory reset, installed the rom and rebooted the phone... but after i chose the "Reboot" option, the phone never again gave a sign of life. It doesn't turn on, it doesn't show any lights whatsoever, i've tried to charge it overnight, but still nothing, considered buying a USB JIG but didn't work, my cousin says the phone seems like it doesn't even have the bootloader anymore... is my phone more than hard-bricked? Is there a way to wake my phone up again? Just for the record, it has no physical damage, it just seems like it has no software inside, that it's just hardware. By the way, when i connect it to the pc using the usb cable, the pc keeps playing the sound that something was plugged in and that something was plugged out right after, and it loops forever.
I'll give more information about the phone if needed. And i hope someone's able to help me.
- TNSM
Click to expand...
Click to collapse
You may try to pull off the battery for few mins, then with someone's help hold the 3 buttons for download mode and then plug in the battery...
If you can't turn it in download mode there's no way to fix it, except jtag maybe.
Ok guys,
as the title says Lumia 710 is bricked.
It had last factory update and everything was working fine. Then i had to mess with it and to try to install Rataplan V9.1.
The process was working ok. By default, bootloader was in DLOAD mode, so in order to install custom ROM i needed to upgrade to Qualcomm. I have upgraded it and installed Rataplan .nb rom to the phone with NSSPro V0.54.
This is when my problems start.
The phone starts with one long vibration followed after few seconds with one short virbtation and thats it. No screen, no system, zip!
When i try to connect it again by usb to check it with NSSPro, it always starts in NAND disk mode. It does not matter do i start it normally on power button or with volume up. Its always in NAND. And it is always stuck. While the phone is connected to USB i can see Qualcomm CDMA Technologies MSM device in device manager but it has yellow mark like the driver is not installed.
I have tried several other roms, and NSS always shows that the rom is successfully installed, but the phone (other than vibration and NAND mode) is dead.
I have also tried all the solutions i could find on the net but no help. Tried, nokia recovery tool, WP recovery tool, Chimera e.t.c. Nothing works. Now i have a problem with NSS. It keeps stucking and beeing unresponsive for every option except Custom OS flash. Whatever else i click it either says tha phone is not detected or the app stucks and shuts itself down.
Is there other tool i can try?
Can i do anything to recover this phone or did i kill it?
PLEASE HELP!!!
Well that sucks and it sucks no one has tried to help here. I'm fair with Android but too new to WP's to probably be much help. Can you pull the battery out of the phone? Might pull it and leave it out a couple minutes then retry. You also might try from a different computer in case something has gone wrong on your computer in terms of port communication or maybe even a virus of some sort. Good luck.
droidzer1 said:
Well that sucks and it sucks no one has tried to help here. I'm fair with Android but too new to WP's to probably be much help. Can you pull the battery out of the phone? Might pull it and leave it out a couple minutes then retry. You also might try from a different computer in case something has gone wrong on your computer in terms of port communication or maybe even a virus of some sort. Good luck.
Click to expand...
Click to collapse
Tried allready every solution that i could find or think of, including things You described. Nothing. I was left with no other option but to send phone to service. They have a box unit with which they should be able to recover phone.
That was 2 days ago. today is third day so i am thinking that my phone has gone beyond repair. Only thing i can do is to wait and see...
Why not...?
Why not send it in real life to a windows phone expert. There should be a place to get phones repaired But, if they say that it isn't possible for them you may have rendered your phone useless. Google should be your mighty friend in this case :crying: I wish you very good luck.