I had installed LiquidSmooth ROM on my Samsung Galaxy Note GTN7000 a while ago. I run Philz Touch recovery version 6.0.0.1 .
When I tried flashing CM11 , I got an error something like set_metadata_recursive .. .
I googled it up, and found that I need to update my recovery. SO, i downloaded the latest version of CWM from their website and tried flashing it through the recovery. And it is resulting in a sudden shut down and then in a bootloop when switching on .
What wrong am I doing? How can I rectify this?
Flash Raw Kernek r5:
http://forum.xda-developers.com/showthread.php?t=2397000
On our device the recovery is incorporated into the kernel, never flash a recovery or kernel that isn't meant for our device.
Once you have flashed that, reboot to recovery and perform a full wipe. Then proceed with the installation of CM.
Related
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
<< 12.05.2013 - PhilZ-cwm6 v5.03.0 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop)
Click to expand...
Click to collapse
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
ajay0ajay0 said:
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
Click to expand...
Click to collapse
I faced a similar problem yesterday.
First of all go back to CWM, wipe cache and dalvik, then go to mounts and storage and mount system, sd card, preload, cache, sd-ext, don't touch emmc.
After that go to ADVANCED and fix permissions. Then wipe cache and dalvik again.
It worked for me.
Let me know the results.
ajay0ajay0 said:
I am new here and i have Galaxy Note with Stock ICS 4.0.3 (Indian).
and i want to flash PA 3.+ on it.
for that pupose, i have flashed latest Phils Root+CWM6 which is
after flashing it from Stock Recovery, phone is getting stuck at BootLogo.
but the phone is getting boot into CWM, but cant able to flash to flash PA, showing error and also my i am unable to boot into stock system.
so please help me and give me solution for this.
i am a newbie and theres a lots of kernels, codes, recoveries n roms which makes me confused..
Click to expand...
Click to collapse
You are flashing a JB kernel on an ICS rom. That is why you get stuck. What you can actually do is the following:
- Put PA in your sdcard (internal or external)
- Reflash Philz Kernel and go to advance and reboot recovery (not device)
- From that touch recovery flash PA and GAPPS.
If not, find Philz file for your build version and everything will be just fine.
yes you're flashing jb kernel on ics. please read the instructions on the kernel thread before you flash it.
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Bugeera said:
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Click to expand...
Click to collapse
What did you do exactly?
Viper The Ripper said:
What did you do exactly?
Click to expand...
Click to collapse
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Ok now you are unrooted on your new polish right. So now root it with UniversalGingerbreadroot.zip (google it.) Flash an older version of CWM(5.0) through the stock recovery. Finally install a stable custom rom initially do not go for CM roms as for testing try some other stock based rom and if successful you can advance to CWM.
All the best.
Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Here you'll find ROOT and CWM files to get ready your Ace, than you'll be able to install Customs STOCK Roms, CM7.x, CM9.x, CM10.x
Read carefully the threads in GT-S5830 Android Development section and follow the dev's instructions
PS: To get CM11.x you'll need to flash CWM6.x or TWRP
Hi guys,
complete noob mistake :angel:
I hit the wrong button in TWRP (v.2.3.3.0) and wiped the system off my i9305, now I want to install AOSB (or any ROM for that matter!)
The AOSB install fails with a Status 7 "set_metadata_recursive: some changes failed"
I've unzipped the ROM and deleted the lines at the start where it checks the device type just in case, but that hasn't fixed it.
I'm getting the same error with two different CM11 builds for the i9305 too.
I read somewhere that its a problem with TWRP, so I downloaded TWRP 2.6.3.1 Flashable, and I've been trying to flash that.
It says the install was successful, then I wipe cache & dalvic, power off, and start to recovery, but it goes into the older 2.3.3.0 recovery.
I can't use Odin because the USB port is broken...I've tried replacing it with a soldering iron without success (Don't have a reflow gun...yet)
Is there any way I can update / fix TWRP by using it to flash a new recovery over itself? Ideally I'd like the newest CWM, as that is apparently needed to flash AOSB but once i get any functional rom on it at all I was planning on installing CWM from the system and flashing AOSB then.
Any help would be greatly appreciated :good:
Bump
Can anyone shed any light on this?
Followed the tutorial http://forum.xda-developers.com/galaxy-note/development/rom-resurrection-remix-lp-5-2-0-t2982773
but failed.
Tried different versions of CWM ... got stuck with Status 7 error.
Later on, I also thought of trying TWRP as mentioned in the above link.
The phone goes into bootloop...does not start-up but yea, i can go into the CWM Recovery.I tried flashing TWRP over CWM.It did not replace the existing cwm.
Current CWM recovery on my phone is PhilZ-cwm6-ZSLO2-OZS-5.00.5-signed
Tried to flash this Resurrection_Remix_LP_v5.4.5-20150519-i9100 but got status 7 error which means i used a wrong recovery i think..
Please tell me which version of CWM should i use or maybe TWRP.
and also a stable Resurrection ROM ..
And which G Apps should i use ...i have the latest one (5-27-15) ?_?
Am i suppose to flash a stock firmware all over again? Or can i just fix my phone by flashing the remix 5.4.5?
Links would be helpful ... Thanks
I have only 2 ROMS downloaded on my PC as of now resurrection 5.4.5 and 5.4.0(stable) so is it possible to fix my phone using these?
With your current recovery flash raw kernel for cm11 or cm12.. Then boot into new recovery and flash the RR ROM.
Ok!
Flashed the new kernel successfully from the below link.
R10 CM12.1
http://forum.xda-developers.com/showthread.php?t=2397000
but now when i flash the Resurrect Remix 5.4.5 .. I get an error "Status 7" - Installation aborted.
*still stuck at bootloop* *can only go into recovery*
what to do?
Did you reboot into the new recovery? Also make sure you have good download.. It could be a broken zip too. I still don't get what bootloop you are talking about.
Hey, I just tried rooting my Galaxy Note 5 from Bell, model SM-N920W8, and was unable to boot into recovery when using arter's Philz recovery (though odin reported the flash successful). I tried TWRP afterwards which works as a recovery, however afterrwards my OS stopped booting, resulting in a bootloop before the boot animation. even when trying to flash a new ROM (VIPER 1.4) it bootloops and trying to flash Philz through a zip file also breaks recovery. Is there anything I am doing wrong?
Im going to try another rom, but any suggestions or knowledge as to why i can't get CWM or my System to boot.
Edit: Tried the SpaceX kernel and it seems to be working. Guess arter's kernel and recovery just wont play nice.