My Touch Pad went nuts and decided it wasn't going to boot. It will start to boot but only gets to the screen that says loading.. The next screen would be the boot animation but it never gets that far.
I have to hard rest the TP but instead of booting to the Moboot menu it just goes right by and keeps trying to boot cm10. So I stuck in loop hell.
I was trying to boot to recovery but I'm not sure you can without the menu.
Anyone have any ideas? I can get into USB mode but that's it. Haven't tried ADB but not sure if it boots far enough for adb?? another problem is my battery was at 15% so I have to do something fast once I turn it on as it would charge the way it is now.
HELP!?
Hold down a button such as one of the volume buttons while it is booting from a powered down state. Moboot cannot proceed with a button held down. You'll get a prompt to release all keys and you should then go into the moboot menu.
Sent from my slim_tenderloin using xda app-developers app
If you hold the volume up Button and press power till you see tha hp logo, you should go into the recovery mode right away!
pattyland said:
If you hold the volume up Button and press power till you see tha hp logo, you should go into the recovery mode right away!
Click to expand...
Click to collapse
Well that's how its supposed to work. But once I let go of keys it starts to boot into moboot (I can see the screen) but then there is no actual menu and it just automatically starts booting CM10 again.
Anyways I found the ACME un-istaller and was able to run it before my battery totally died (it was at 5%) and at least now I'm back to WebOS and fully charged. I guess I"ll have to reinstall all the Android stuff from scratch. But WebOS isn't all that bad and actually work very well, if only their was app support.
Thanks for your help though.
ok got ace with phone is in boot loop the phone is in normal format just keeps going threw samsung logo screen known has bootloop unable to go in recoverly mode with holding home button and power button.i think i need to flash phones motherborard with drivers ao android can boot but have no idea how to please can someone help
vitman46 said:
ok got ace with phone is in boot loop the phone is in normal format just keeps going threw samsung logo screen known has bootloop unable to go in recoverly mode with holding home button and power button.i think i need to flash phones motherborard with drivers ao android can boot but have no idea how to please can someone help
Click to expand...
Click to collapse
1 - turn phone off.
2 - hold down home button.
3 - whilst still holding down home button hold the power button down to turn phone on.
4 - when you see Samsung logo let go of the power button but keep holding the home button.
5 - when you see the recovery menu you can let go of the home button.
What did you do to the phone for this problem to occur?
ok this is new to me so once downloaded mdm file then what do i need to do.was doing nothing to phone when bootloop occured and wont go into recovery mode have tried many times.
vitman46 said:
ok this is new to me so once downloaded mdm file then what do i need to do.was doing nothing to phone when bootloop occured and wont go into recovery mode have tried many times.
Click to expand...
Click to collapse
Have you tried to boot the phone into Download mode?
ok i can get into download mode what is the next step????
Hi Everybody
I had a 7" kindle fire hd that was rooted but I was trying to get the latest google play installed with KF First Aide but for some reason it got messed up. Now it takes a long time to boot up and when it boots up, instead of going to the go launcher screen, it looks like it's going to the default Kindle home screen. I see the Shops, Games, Apps, Books, etc at the top with no images or anything at all.
I also see the Customer Also Bought at the bottom but no icons or images at all either. There's nothing else to click on. I tried to do the restore in KF First Aide but that didn't work.
Anybody have any suggestions?
Anybody in the OC California area want to help? I would gladly pay for your time?
Or can this be done remotely? I would also gladly pay for your time.
I just want to get this to work again!
Thanks!!!
Boot into Recovery and do a factory reset. Assuming you know how to use ADB and fastboot, grab a .bin file of the 7.2.3 OS image from Hashcode in the development forum and flash.
How do I boot in Recovery and do a factory reset? Do I need the factory cable for that? I have one on the way.
seokhun said:
Boot into Recovery and do a factory reset. Assuming you know how to use ADB and fastboot, grab a .bin file of the 7.2.3 OS image from Hashcode in the development forum and flash.
Click to expand...
Click to collapse
bsk997 said:
How do I boot in Recovery and do a factory reset? Do I need the factory cable for that? I have one on the way.
Click to expand...
Click to collapse
Shutdown the Kindle, then power it on holding the Volume Up button. If that doesn't work, power the Kindle on, and THEN hold the Volume Up button. Either way, you should end up in a simple Amazon Recovery screen with you options, factory reset and reboot. Go ahead and do a factory reset. There are other ways to get into Recovery but only in-app, like from ROM Toolbox and such.
But before that, try a master reset first. This is much more simple. At any time when the Kindle is powered on, after it finishes booting, hold the Power button for 30 seconds, then release, and hit it again to power the tablet on. This master reset resolves many problems like crashes and freezes.
I tried the master reset but it still boots up to a sluggish kindle home screen with no icons or home button.
I tried the shutdown then power on with vol up button but that didn't work.
So I shutdown, turn on, then hold vol up button. I didnt get an amazon reset screen. I put me in safe mode?
Any other suggestions?
Thanks!!
seokhun said:
Shutdown the Kindle, then power it on holding the Volume Up button. If that doesn't work, power the Kindle on, and THEN hold the Volume Up button. Either way, you should end up in a simple Amazon Recovery screen with you options, factory reset and reboot. Go ahead and do a factory reset. There are other ways to get into Recovery but only in-app, like from ROM Toolbox and such.
But before that, try a master reset first. This is much more simple. At any time when the Kindle is powered on, after it finishes booting, hold the Power button for 30 seconds, then release, and hit it again to power the tablet on. This master reset resolves many problems like crashes and freezes.
Click to expand...
Click to collapse
bsk997 said:
I tried the master reset but it still boots up to a sluggish kindle home screen with no icons or home button.
I tried the shutdown then power on with vol up button but that didn't work.
So I shutdown, turn on, then hold vol up button. I didnt get an amazon reset screen. I put me in safe mode?
Any other suggestions?
Thanks!!
Click to expand...
Click to collapse
There's no safe mode, it's probably the fastboot screen, but you normally can't get into fastboot unless you use an app or if you have a factory cable (not the USB cable that came with the device).
Try shutting down, then booting holding BOTH Volume Up AND Volume Down and see if you can trigger Recovery that way. I know I have managed to enter Recovery once like that.
Hi.
I am using TWRP recovery and custom rom on cm11 base. And I love my Motorola phone.
Today my phone freezed and i did hard reset POWER + DOWN ans system is stuck on booting animation. And I cannot go to recovery. I am holding POWER + DOWN, this combination do only hard reset without recovery.
Recovery is availeble only from shutdown fhone? Or is here any hack how to get to recovery?
Update:
Now I able to shutdown phone. Battery is 0 percent.
I put phone to charger and I wait 10 minutes. I disconnect charger and phone is off. Ok. I hold POWER + DOWN . Bootloader unlock warning. I am still holding buttons. After warning is restart warning again and CM11 booting animation.
I cannot go into recovery.
Any idea?
Thanks
Thanks...
I have it.
I must hold only DOWN button after start (or restart).
I was trying to go back to stock after having Lineage installed but it crapped out during the install. The tablet is now stuck on the SAMSUNG logo screen and it seems impossible to do anything to get around it. The only button combo options that work are power+vol down which reboots and power+vol down +home which puts it into download mode. I've tried reloading the stock firmware and twrp using Odin but it always results in the same, the tablet reboots then goes to the standard android update screen, says it's doing an update and then reboots and it's back to the SAMSUNG screen. Nothing I do gets me into recovery and while Odin connects I can't get ADB etc to.
Any suggestions other than throw it in a drawer and forget about it?
TIA
Ok I got further. I left the tablet for the battery to die, then fully charged it, plugged into the PC and then started with the recovery key combo and bingo got the No Command screen then the standard recovery options. Deleted the cache and did a factory delete/reset and it's alive again.