Related
Tried the sony method... Device not found...
Tried the flashtool method... Device not found...
I don´t know if I´m getting the fastboot drivers right or not, the does turn blue when I connect it to the PC in fastboot mode...
USB debugging is checked...
Does the phone need to be in sotck FW 350?
Help?
emoratori said:
Tried the sony method... Device not found...
Tried the flashtool method... Device not found...
I don´t know if I´m getting the fastboot drivers right or not, the does turn blue when I connect it to the PC in fastboot mode...
USB debugging is checked...
Does the phone need to be in sotck FW 350?
Help?
Click to expand...
Click to collapse
First of all, Bootloader Unlock Allowed: Yes?
diego9016 said:
First of all, Bootloader Unlock Allowed: Yes?
Click to expand...
Click to collapse
Yep...
emoratori said:
Yep...
Click to expand...
Click to collapse
Did you install the fastboot drivers?
diego9016 said:
Did you install the fastboot drivers?
Click to expand...
Click to collapse
I did, but I don´t know if they´re working.
Didn´t notice anything different in the device manager.
The first time I connected my device windows couldn´t install them, but it did not ask for them again.
How are them suposed to be installed?
emoratori said:
I did, but I don´t know if they´re working.
Didn´t notice anything different in the device manager.
The first time I connected my device windows couldn´t install them, but it did not ask for them again.
Click to expand...
Click to collapse
That's the problem. Windows can't install them just when you connect the phone, you need to install them manually.
When you downloaded the Unlock Bootloader tool, there was a folder or a zip with the drivers. If it is a zip, extract it.
Connect the phone leaving up arrow pressed, the led will turn blue.
Go to device manager on the pc, look for Fastboot or something like that.
Select browse my computer for driver software and select the divers folder. It should install them right away.
Now you have the fastboot drivers installed and you can continue with the procedure.
Edit: You already have the KEY from Sony?
diego9016 said:
That's the problem. Windows can't install them just when you connect the phone, you need to install them manually.
When you downloaded the Unlock Bootloader tool, there was a folder or a zip with the drivers. If it is a zip, extract it.
Connect the phone leaving up arrow pressed, the led will turn blue.
Go to device manager on the pc, look for Fastboot or something like that.
Select browse my computer for driver software and select the divers folder. It should install them right away.
Now you have the fastboot drivers installed and you can continue with the procedure.
Edit: You already have the KEY from Sony?
Click to expand...
Click to collapse
When I go to DEVICE MANAGER I can´t find fastboot or anything like it... There are a couple of unknown devices...
I should power down the phone and connect it with vol up right?
emoratori said:
When I go to DEVICE MANAGER I can´t find fastboot or anything like it... There are a couple of unknown devices...
Click to expand...
Click to collapse
Win7?
Can you attach some screenshots of the device manager page?
Yes. You need to power off and connect the device holding up until led turns blue.
diego9016 said:
Win7?
Can you attach some screenshots of the device manager page?
Yes. You need to power off and connect the device holding up until led turns blue.
Click to expand...
Click to collapse
Yeah, win7... 64x...
I´m at work right now... When I get home I´ll post...
PLEASE don´t leave me!!! hehehe...
emoratori said:
Yeah, win7... 64x...
I´m at work right now... When I get home I´ll post...
PLEASE don´t leave me!!! hehehe...
Click to expand...
Click to collapse
Don't worry, if I can help, I'll do it.
EDIT: When you get home, check this out. It was for 2011/12 devices, but most of the procedure works for the Z.
Fastboot drivers are unsurported on x64 you have disable driver verification
diego9016 said:
Don't worry, if I can help, I'll do it.
EDIT: When you get home, check this out. It was for 2011/12 devices, but most of the procedure works for the Z.
Click to expand...
Click to collapse
One question...
If I install the fastboot drivers through the flash tool should it work?
Maddhouse said:
Fastboot drivers are unsurported on x64 you have disable driver verification
Click to expand...
Click to collapse
How?
Thanks!
think this is it
1. download flashtool and install
2. type "bcdedit /set testsigning on" in cmd and restart PC
3. install driver in the flashtool "drivers" folder, check fastboot, agree when prompts
4. type "bcdedit /set testsigning off" in cmd and restart PC
http://msdn.microsoft.com/en-us/library/windows/hardware/ff553484(v=vs.85).aspx
EDIT:
Also this might be handy if you are planning alot of adb usage
Got it!
Usb debugging was MST and not MCS... duh...
Unocked...
Recovery...
Rooted...
THANKS!
Hello,
I'm new and I just starting.
Everything going well, but when I want to install CMW I made an error, I don't unlock bootloader before the install, and now when I switch on my phone (lg p880) I see LG logo and nothing happens.
- I tried to "Update firmware through flashing the kdz files" by post on XDA, I have error when I press button 'launch software update' in KDZ_FW_UPD, error about Up text Ex mod2. I add my phone have root!
- I tried to unlock booloader in All in One but my phone don't have debbuging switch on, thats information show me.
- I tried in SDK Manager with fastboot, eclipse and drivers are installed but something maybe I do wrong and isn't work too.
- My computer don't see phone, when I connected phone to computer holding VOL-
How can I do something? How to install maybe orginal ROM, but I want to install Avatar ROM on XDA and this is the beginnig I read that to install the ROM I must have root, unlock bootloader and CWM.
I can go only to orginal recovery and s/w update (but there is nothing doing, when I connected to computer holding VOL- , my computer can't see phone, and I don't have connection with LG Mobile Support Tool)!!!
So now I have nothing
Please HELP me, I don't have phone now and this is terrible.
I add that I'm a girl so please write step by step
[email protected] said:
Hello,
I'm new and I just starting.
Everything going well, but when I want to install CMW I made an error, I don't unlock bootloader before the install, and now when I switch on my phone (lg p880) I see LG logo and nothing happens.
- I tried to "Update firmware through flashing the kdz files" by post on XDA, I have error when I press button 'launch software update' in KDZ_FW_UPD, error about Up text Ex mod2. I add my phone have root!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2069723
And if you dont have the lg optimus 4x usb drivers , it wont work.
[email protected] said:
- I tried to unlock booloader in All in One but my phone don't have debbuging switch on, thats information show me.
Click to expand...
Click to collapse
if u cant boot then how are u gonna put it in debbuging mode ? ... its in settings.
[email protected] said:
- I tried in SDK Manager with fastboot, eclipse and drivers are installed but something maybe I do wrong and isn't work too.
Click to expand...
Click to collapse
fastboot is used to install something in adb fastboot mode or to flash a recovery image.
[email protected] said:
- My computer don't see phone, when I connected phone to computer holding VOL-
Click to expand...
Click to collapse
usb drivers and adb drivers.
[email protected] said:
Please HELP me, I don't have phone now and this is terrible.
I add that I'm a girl so please write step by step
Click to expand...
Click to collapse
so what ? and me im superman
---------------------------------------------------------------------------------------------------------
<<USE THE SEARCH FUNCTION OR THE RECENTLY ASKED QUESTIONS IN HELP SECTION>>
As the title says I can't flash it (2.3.6 gb). Everytime I connect the phone in download mode I get 'USB Not Recognized' error, I've updated KIES drivers already and nothing happened.
Sorry, but I don't know how to help you. I got the same problem when I used my Windows 8 PC.
On my WinXP PC, it's worked.
I'll give a try on XP , too. I tried on Win 8.1 and 7 and didn't worked.
fordawin said:
As the title says I can't flash it (2.3.6 gb). Everytime I connect the phone in download mode I get 'USB Not Recognized' error, I've updated KIES drivers already and nothing happened.
Click to expand...
Click to collapse
tomi456 said:
Sorry, but I don't know how to help you. I got the same problem when I used my Windows 8 PC.
On my WinXP PC, it's worked.
Click to expand...
Click to collapse
fordawin said:
I'll give a try on XP , too. I tried on Win 8.1 and 7 and didn't worked.
Click to expand...
Click to collapse
First, you have to install SAMSUNG USB Driver into your PC
Then only you can Flash your firmware with Odin
USB Driver: http://www.mediafire.com/download/7srv709j7nkivj0/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Odin Multi downloader: http://d-h.st/6Rx
Samsung usb drivers works only with Win7, xp, and older than these
Whole discription about "how to" is here: http://forum.xda-developers.com/showthread.php?t=1255305
Enjoy and press thanks button
Also enable USB debugging in phone's settings(if not done yet)
So now i have no os..just recovery and bootloader...and when i enter to fastboot my pc dsnt recognize the phone..what can i do? to install the driver so my pc will recognize the phone and i can sideload a rom?..
Diaze said:
So now i have no os..just recovery and bootloader...and when i enter to fastboot my pc dsnt recognize the phone..what can i do? to install the driver so my pc will recognize the phone and i can sideload a rom?..
Click to expand...
Click to collapse
If your on windows 7 you can use the guide in post 2 here
http://forum.xda-developers.com/showthread.php?t=2541082
If you using Windows 8.1 you can use the Driver hack I use
posted here http://forum.xda-developers.com/showthread.php?p=49131915
The file you use is here http://forum.xda-developers.com/attachment.php?attachmentid=2500592&d=1389122072
I repeat this is a REALLY DIRTY solution that may harm your system, personal data, hardware and/or cat.
Here are the steps:
0. Have a Linux or Windows LiveCD just in case something goes wrong
1. Download and extract files from attachment
2. Navigate to the folder corresponding to your system version (x86 = 32-bit, x64 = 64 bit)
3. Right-click franken-usb.bat and click "Run as Administrator"
5. Wait for it to finish and reboot the system. If everything went fine, you will boot your system successfully
6. Install ADB/Fastboot drivers just like on Windows 8
7. Connect your phone in Fastboot mode to your USB 2.0 port and check if it works
8. Enjoy and wait for official fix
How does it work:
It's not any kind of magic - it just replaces Windows 8.1's usbhub.sys and usbport.sys with Windows 8's ones.
Old files don't check for BOS descriptor so Fastboot can work.
Script updated - it should now actually copy the files but please double check if files were copied to C:\Windows\system32\Drivers!
Hope it helps you!
Regards!
Click to expand...
Click to collapse
I dont want to go to stock...i just want to flash any rom so my phone will boot...i have twrp installed..and i want to sideload any rom..but my pc dsnt recognize the phone..it dsnt show fastboot_usb...and my pc say unknown device.. sry for my english
Diaze said:
I dont want to go to stock...i just want to flash any rom so my phone will boot...i have twrp installed..and i want to sideload any rom..but my pc dsnt recognize the phone..it dsnt show fastboot_usb...and my pc say unknown device.. sry for my english
Click to expand...
Click to collapse
Fix your drivers
I post 2 links on fixing your drivers
FAQ:
1) Q: I'm using Windows 8.1 what should I worry about
(continue reading FAQ)
2) Q: I'm using Windows 7 what should I worry about
Click to expand...
Click to collapse
Diaze said:
I dont want to go to stock...i just want to flash any rom so my phone will boot...i have twrp installed..and i want to sideload any rom..but my pc dsnt recognize the phone..it dsnt show fastboot_usb...and my pc say unknown device.. sry for my english
Click to expand...
Click to collapse
not the guide, just the Frequently Asked Questions (FAQ #2): http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
it says unknown device...I installed the drivers from that faq...but still dsnt work
http://postimg.org/image/ijgbndbrd/ screenshot
http://postimg.org/image/bp2wgyabz/
Diaze said:
it says unknown device...I installed the drivers from that faq...but still dsnt work
http://postimg.org/image/ijgbndbrd/ screenshot
http://postimg.org/image/bp2wgyabz/
Click to expand...
Click to collapse
have you tried manually updating the driver as mentioned in FAQ #2??
nkk71 said:
have you tried manually updating the driver as mentioned in FAQ #2??
Click to expand...
Click to collapse
http://postimg.org/image/ut0hqi26d/ look..
when I try to manually update
Diaze said:
http://postimg.org/image/ut0hqi26d/ look..
when I try to manually update
Click to expand...
Click to collapse
uncheck show compatible hardware
the find HTC corporation in the list and choose the My HTC driver 2.07
Diaze said:
http://postimg.org/image/ut0hqi26d/ look..
when I try to manually update
Click to expand...
Click to collapse
if you are sure that's the device, then uncheck "show compatible devices"
why don't you uninstall the driver, unplug phone, reboot PC, plug phone in, see what it gives then
clsA said:
uncheck show compatible hardware
the find HTC corporation in the list and choose the My HTC driver 2.07
Click to expand...
Click to collapse
I don't have htc corporation on the list...
nkk71 said:
if you are sure that's the device, then uncheck "show compatible devices"
why don't you uninstall the driver, unplug phone, reboot PC, plug phone in, see what it gives then
Click to expand...
Click to collapse
I ll try that too
Diaze said:
I ll try that too
Click to expand...
Click to collapse
still nthing..
I don't use the original usb cable from htc one..can this be the cause?
Diaze said:
still nthing..
I don't use the original usb cable from htc one..can this be the cause?
Click to expand...
Click to collapse
could be... try an original/other cable and different usb2 ports
ok now it shows fastboot_usb..I fixed it by using the original cable..
so now what is the next step? I don't have adb or anything installed? how to install the new rom?
Diaze said:
ok now it shows fastboot_usb..I fixed it by using the original cable..
so now what is the next step? I don't have adb or anything installed? how to install the new rom?
Click to expand...
Click to collapse
seriously??
these are the ones i run on windows: mini-sdk-1.0.31-windows.rar
as for getting rom onto your phone: check the Frequently Asked Question sticky page 3
nkk71 said:
seriously??
these are the ones i run on windows: mini-sdk-1.0.31-windows.rar
as for getting rom onto your phone: check the Frequently Asked Question sticky page 3
Click to expand...
Click to collapse
I downloaded htc one plus one rom and when I try adb sideload ROM.zip it says ``sending rom.zip 1%..at it gets stuck at 1%...
after waiting some time it says faile to write data -protocol fault (no status)
please help
no1?
Diaze said:
I downloaded htc one plus one rom and when I try adb sideload ROM.zip it says ``sending rom.zip 1%..at it gets stuck at 1%...
after waiting some time it says faile to write data -protocol fault (no status)
please help
Click to expand...
Click to collapse
if you are now certain that the connection between your PC and phone is now stable, do step "D) Recovery showing 'unable to mount /data' or 'internal storage'" to cleanly reformat your partitions.
nkk71 said:
if you are now certain that the connection between your PC and phone is now stable, do step "D) Recovery showing 'unable to mount /data' or 'internal storage'" to cleanly reformat your partitions.
Click to expand...
Click to collapse
ok i`ll try and let u know
ps. i did step D but it still stays at 1 %..
but..can i use a otg cable to install the rom? i`ll buy a otg cable..put the rom on a usb and then flash it..is this possible??
If Your Phone is Not Powering on And No Bootloader or "Download Mode" It Means Your Device Is Hard Bricked And It Is More Complicated To Recover Than "Soft Brick".This Tutorial Will Guide You How to Recover Your Phone
This Tutorial Also Works on Nokia X,XL And X+
1.MAKE Sure that you have NOKIA CARE SUITE installed in your pc
2.DOWNLOAD Flash Files for NOKIA X2 (you can use Data Package Manager or Navifirm)
3.INSTALL Nokia X2 Driver in your pc (you can insall using Nokia X2 tools)
4.DOWNLOAD and Install "Emergency Download Driver" or "X2_FlashDriver_Emergency.msi" from Attachment Below
5.DOWNLOAD"X2_Flashdriver_Emergency_XP.rar And Extract Anywhere in Your pc
6.CONNECT Your Phone to PC
7.GO to Control Panel/Device Manager expand the "Ports" section and you should see a Qualcomm Device
8.RIGHT Click on the Device and Choose"Update Driver Software"and Click "Browse My Computer for Driver Software" and Click "Let me pick from a list of device drivers on my computer" and Click "Have Disk"
9.CLICK Browse and go to Folder Where you extract the X2_FlashDriver_Emergency_XP.rar and Choose "EmergencyDownload.inf" and Install the Driver and you Should see the device as "Nokia Emergency Connectivity" and a "QHUSB_BULK" will appear in Universal Serial Bus Devices Section
10.OPEN Nokia Care Suite and Launch Product Support Tool For Store
11.CLICK File and Choose Open Product And Choose Nokia X2,Click Programming and Choose "Recovery" and Start the Recovery Process And Wait Until The Process Is Done And You can have your Phone Back
Please help me pro
I dont see a "QHUSB_BULK" will appear in Universal Serial Bus Devices only see Nokia Emergency Connectivity. I am using win 7
littlemouse024 said:
If Your Phone is Not Powering on And No Bootloader or "Download Mode" It Means Your Device Is Hard Bricked And It Is More Complicated To Recover Than "Soft Brick".This Tutorial Will Guide You How to Recover Your Phone
This Tutorial Also Works on Nokia X,XL And X+
1.MAKE Sure that you have NOKIA CARE SUITE installed in your pc
2.DOWNLOAD Flash Files for NOKIA X2 (you can use Data Package Manager or Navifirm)
3.INSTALL Nokia X2 Driver in your pc (you can insall using Nokia X2 tools)
4.DOWNLOAD and Install "Emergency Download Driver" or "X2_FlashDriver_Emergency.msi" from Attachment Below
5.DOWNLOAD"X2_Flashdriver_Emergency_XP.rar And Extract Anywhere in Your pc
6.CONNECT Your Phone to PC
7.GO to Control Panel/Device Manager expand the "Ports" section and you should see a Qualcomm Device
8.RIGHT Click on the Device and Choose"Update Driver Software"and Click "Browse My Computer for Driver Software" and Click "Let me pick from a list of device drivers on my computer" and Click "Have Disk"
9.CLICK Browse and go to Folder Where you extract the X2_FlashDriver_Emergency_XP.rar and Choose "EmergencyDownload.inf" and Install the Driver and you Should see the device as "Nokia Emergency Connectivity" and a "QHUSB_BULK" will appear in Universal Serial Bus Devices Section
10.OPEN Nokia Care Suite and Launch Product Support Tool For Store
11.CLICK File and Choose Open Product And Choose Nokia X2,Click Programming and Choose "Recovery" and Start the Recovery Process And Wait Until The Process Is Done And You can have your Phone Back
Click to expand...
Click to collapse
hi. I will write a tool for this process. did you try this method on nokia x2 before?
symbuzzer said:
hi. I will write a tool for this process. did you try this method on nokia x2 before?
Click to expand...
Click to collapse
Yes And It Worked For Me After I Mess up My Phone
littlemouse024 said:
Yes And It Worked For Me After I Mess up My Phone
Click to expand...
Click to collapse
ok, thanks for your reply.
Is there any way to enable qusb_bulk mode without bricking phone for example flashing special boot image, fastboot command etc?
symbuzzer said:
ok, thanks for your reply.
Is there any way to enable qusb_bulk mode without bricking phone for example flashing special boot image, fastboot command etc?
Click to expand...
Click to collapse
You Can Try Updating Nokia X2 Driver InTo Nokia Emergency Connectivity In Device Manager Using The X2_FlashDriver_Emergency_XP.rar Below.
nguyentuyen said:
I dont see a "QHUSB_BULK" will appear in Universal Serial Bus Devices only see Nokia Emergency Connectivity. I am using win 7
Click to expand...
Click to collapse
Its Not in The Universal Serial Bus Section It Will Appear In The Main Section in Device Manager
littlemouse024 said:
Its Not in The Universal Serial Bus Section It Will Appear In The Main Section in Device Manager
Click to expand...
Click to collapse
You do it on win 7, win 8 or xp pro. I still dont find "QHUSB_BULK" in device manager and nokia care suite dont find my phone when i click stat button.
symbuzzer said:
hi. I will write a tool for this process. did you try this method on nokia x2 before?
Click to expand...
Click to collapse
Please help me if your tool work. Thanks
nguyentuyen said:
You do it on win 7, win 8 or xp pro. I still dont find "QHUSB_BULK" in device manager and nokia care suite dont find my phone when i click stat button.
Click to expand...
Click to collapse
Take A Look At This Sites It Have A Screenshot And Better Explanation http://forum.gsmhosting.com/vbb/f60...ncy-driver-installation-1897324/#post10763762
http://forum.gsmhosting.com/vbb/f609/nokia-x2-dead-solution-inside-1885447/
littlemouse024 said:
Take A Look At This Sites It Have A Screenshot And Better Explanation http://forum.gsmhosting.com/vbb/f60...ncy-driver-installation-1897324/#post10763762
http://forum.gsmhosting.com/vbb/f609/nokia-x2-dead-solution-inside-1885447/
Click to expand...
Click to collapse
Did u try this on Nokia XL
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
littlemouse024 said:
If Your Phone is Not Powering on And No Bootloader or "Download Mode" It Means Your Device Is Hard Bricked And It Is More Complicated To Recover Than "Soft Brick".This Tutorial Will Guide You How to Recover Your Phone
This Tutorial Also Works on Nokia X,XL And X+
1.MAKE Sure that you have NOKIA CARE SUITE installed in your pc
2.DOWNLOAD Flash Files for NOKIA X2 (you can use Data Package Manager or Navifirm)
3.INSTALL Nokia X2 Driver in your pc (you can insall using Nokia X2 tools)
4.DOWNLOAD and Install "Emergency Download Driver" or "X2_FlashDriver_Emergency.msi" from Attachment Below
5.DOWNLOAD"X2_Flashdriver_Emergency_XP.rar And Extract Anywhere in Your pc
6.CONNECT Your Phone to PC
7.GO to Control Panel/Device Manager expand the "Ports" section and you should see a Qualcomm Device
8.RIGHT Click on the Device and Choose"Update Driver Software"and Click "Browse My Computer for Driver Software" and Click "Let me pick from a list of device drivers on my computer" and Click "Have Disk"
9.CLICK Browse and go to Folder Where you extract the X2_FlashDriver_Emergency_XP.rar and Choose "EmergencyDownload.inf" and Install the Driver and you Should see the device as "Nokia Emergency Connectivity" and a "QHUSB_BULK" will appear in Universal Serial Bus Devices Section
10.OPEN Nokia Care Suite and Launch Product Support Tool For Store
11.CLICK File and Choose Open Product And Choose Nokia X2,Click Programming and Choose "Recovery" and Start the Recovery Process And Wait Until The Process Is Done And You can have your Phone Back
Click to expand...
Click to collapse
Does this work for Nokia XL, please add nokia xl files
farisrazor said:
Did u try this on Nokia XL
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
Does this work for Nokia XL, please add nokia xl files
Click to expand...
Click to collapse
I Did This Steps In My X2 After IT Gets Hard Bricked,,You Can Try Updating Your Driver With Files In Attachment,Its For Nokia X Devices
littlemouse024 said:
I Did This Steps In My X2 After IT Gets Hard Bricked,,You Can Try Updating Your Driver With Files In Attachment,Its For Nokia X Devices
Click to expand...
Click to collapse
i just tried this but my phone still not turning on? flashed the exact Firmware but still its not turning on help?
DinethIrusha said:
i just tried this but my phone still not turning on? flashed the exact Firmware but still its not turning on help?
Click to expand...
Click to collapse
What Do You Mean Not Turning On?,Does Nokia Care Suite Shows "Recovery Completed"? If it Shows Check Your Battery. Your Phone Will Take Time To Be Able To Turn On In First Charge
littlemouse024 said:
What Do You Mean Not Turning On?,Does Nokia Care Suite Shows "Recovery Completed"? If it Shows Check Your Battery. Your Phone Will Take Time To Be Able To Turn On In First Charge
Click to expand...
Click to collapse
Yes, it said that "Recovery Completed" It's still not turning on when i press the power button :| i flashed the exact Firmware too ... :|.. and no Battery Icon not showing :| It's not even Vibrate
DinethIrusha said:
Yes, it said that "Recovery Completed" It's still not turning on when i press the power button :| i flashed the exact Firmware too ... :|.. and no Battery Icon not showing :| It's not even Vibrate
Click to expand...
Click to collapse
Its OK It Will Take Time To Charge At First,,It Happened to Me
littlemouse024 said:
Its OK It Will Take Time To Charge At First,,It Happened to Me
Click to expand...
Click to collapse
is that so? okay...will charge and see
NOPE..still its not booting up....i'd charged for like 2 hours...still no
DinethIrusha said:
NOPE..still its not booting up....i'd charged for like 2 hours...still no
Click to expand...
Click to collapse
I Don't Know What's Wrong With Your Device,,Try Connecting Your Phone To Computer Again And See If Your Phone Is Still In Bootloader Mode
littlemouse024 said:
I Don't Know What's Wrong With Your Device,,Try Connecting Your Phone To Computer Again And See If Your Phone Is Still In Bootloader Mode
Click to expand...
Click to collapse
My PC still detects my phone as "QHSBBULK" ... im going to give it to a Nokia Care Center nohting works